Providing street light on bye-pass road at Village Dhankot in District Gurugram

Amount

Suply and erection of PVC copper insulated and sheathed 2-core circular flexible wire. Size 1.50 sqmm ( 48 / 0.20mm).

Blanking sheet .Suply and erection of blanking sheet in existing distribution board.

Suply and erection of miniature circuit breaker/ isolator 240/415 V in the existing distribution board including making necessary connection. Miniature circuit breakers of 9 KA breaking capacity.TP MCB of 32 amp.

Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. Galvanised iron pipe 50 mm dia on surface.

Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required .

Extra for using salt and charcoal / coke for pipe earth electrode as required.

Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required .

Pdg. and fixing 4.00 mm dia G.I.wire on surface or in recess for loop earthing as equired .

Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections. 16 Sq. mm 4 Core Ard. Cable .

Supply and erection of suitable compression type brass cable glands for underground Cable. 10 Sqmm to 16 Sqmm Cable 2 to 4 Core .

Supply and erection of Godrej Almirah typeM.S.pedestal made of 50 mm x 50 mm x 6 mm angle iron frame with 3.00 mm thick M.S.sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars . The top covering should have downward overhang of 75 mm on all sides of pedestal , having two sets of water proof ventilation holes of suitable size on the sides , at top and bottom , each set containing four Nos. holes to discharge the heat produced by the current . The shutters fixed with rubber gasket of superior quality and of suitable size to make it water proof . The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embeded upto the entire depth in 1:2:4 cement concrete block , projected 75 mm all around the pedestal and and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work:- M.S.pedestal of size 750 mm wide , 900 mm high , 300 mm deep and bottom totally open , duly embeded in cement concrete block of size 900 mm x 450 mm x 200 mm above ground level duly plastered with 12 mm thick 1:4 cement plaster , having a base of size 1050 mm x 600 mm x 250 mm below ground level .

S/E of ISI mark double walled corrugated (DWC) HDPE pipe laid 1 mtr. Below ground level including diging and refilling of earth including cost of suitable size socket/cuppler for HDPE pipe including the cost of labour and material equired to complete the job in all respect upto the entire satisfaction of Engineer-In- Charge of the workHDPE pipe 63/50 mm outer dia/ inner dia.

Supply and errection of Hot Dip Galvanized octagonal pole 3 mm thickness, with base plate including of nut and bolts and all accessories as supplied by the manufacture including cost of foundation accessories etc. The foundation bolts as per manufacturer design should be hot dipped galvanized pole complete of 2 nos. 100 A, 4 pole nature links including connection etc with suitable connection arrangements for 2 no. MCB/ kit kat including cost of RCC 1:1:5:3 for foundation of size 0.7 m x 0.7m x 1.8 m with minimum 8 Nos. 12 mm dia longitudinal MS reinforcement rods with rings of 8 mm dia not more than 200 mm CC for fixing the pole with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work. 9 Mtr. Long pole with top dia 70 mm and bottom dia 155 mm with base plate of size 260 x 260 x 16 mm

Supply and erection of moulded case circuit brecaker single pole/ 4 pole on wall/ on existing pedestal including bounding to earth and making necessary connection required to complete the job the job in all respect up to the entire satisfaction of the Engineer -in - Charge of the work.4 pole MCCB 6 to 63 amp.

Suply, installation, testing and commissioning of 12.5 mtr. long High Mast manufactured from B.S.E.N. 10025 or equivalent grade material in, 2 (two) section hot dip, galvanized inside and outside in single dip, suitable for wind velocity as per IS 875 Part-3 suitable for 6 nos. luminaire loading fully motorized (power tool) with starter & cable complete along with standard accessories supplied by the manufacturer with 3 nos. steel wire rope double drum system and twin dome aviation light with LED without foundation but including cost of set of foundation nut and bolts, installation at site complete in all respect upto entire satisfaction of Engineer -in-ChargeThickness of Top Section = 3 mm (Minimum). Bottom Section = 3 mm (MinimumTop Dia = 150 mmBottom Dia = 360mmThickness of Galvanization Top = 65 micron (Min.)Bottom = 85 micron (Min.)

Supply and erection of 150 watt. LED flood light fitting including erection of same on pole/ parapet with necessary nuts & bolts and making necessary connection of same complete in all respect.

Supply and erection of 120 watt. LED flood light fitting including erection of same on pole/ parapet with necessary nuts & bolts and making necessary connection of same complete in all respect.

Supply and erection of single arm straight G.I. bracket made of 50 mm dia G.I pipe B class (of length 3 mtr.) suitable for mounting of 4 nos. flood lights with 75 mm dia G.I. pipe B class for collar (of length 600 mm) and 32 mm dia G.I. pipe B class for support (of length 1.5 mtr.) top covered with ornamental cap duly welded, painted 2 coats of aluminium paint on bracket, collar & support and golden paint on ornamental cap including erection of same with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-In - charge of work.

Supply and erection of 120 watts LED street light fittng with lense IP 66, HP dia cast aluminium hoising including erection of same on pole with all labour and material required to complete the job in all respect upto entire satisfaction of Engineer - In- Charge.

Supply and erection of single arm bracket made of 50 mm dia G.I pipe B class ISI 1.5 mtr. long with 25 mm dia G.I. bottom pipe with 75 mm dia 60 cm. long G.I. collar pipe, top covered with ornamental cap duly welded, painted 2 coats of aluminium paint on bracket and golden paint on ornamental cap including erection of same with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-In - charge of work.Single side G.I street light bracket(as per standard specifications of manufacturer of GI octagonal pole).

Double side G.I street light bracket(as per standard specifications of manufacturer of GI octagonal pole).

Supply and erection of load line i.e. double door TPN vertical distribution board suitable for MCCB as incommer on existing angle iron board / on wall / in pedestal including making nacessary connection with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-In - charge of work. 4 way Double door TPN distribution board suitable for 63 amp. 4 pole MCCB but without cost of MCCB.

Supply and erection of 32 amp. 3 pole/ 230 volt - digital time switch including cost of contactor, MCB for controlling the street light with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-In - charge of work.

Charges of boaring upto 2.5 mtr. below the gound level treanchless horizental by HDD machine (for laying the cable & pipe) including all labour and material required to complete the job in al respect with cost of laying of 50 mm dia plane HDPE pipe.

Charges of Cutting/Digging of RCC Road Depth: 6”, Width: 4” with Tractor, Compressor & Drill Machine, & Fuel charges @ 500 alongwith removing & fixing of interlocking tiles including all labour and material required to complete the job in al respect.

Supply and erection of RCC 1:1.5:3 for making Foundation of high mast of size: 1m x 1m x 2.5m, with minimum 8 nos. 16mm dia, longitudinal MS reinforcement Rods with rings of 8 mm dia at distance of not more than 200 mm for fixing pole alongwith 1:8:16 brick ballast bed of height 15cm. with all labour and Material required to complete the job in all respect upto entire satisfaction of Engineer- in- charge

Netromics Engineering Solutions Private Limited