Renovation of Common General Bathroom and Toilets of Ward A, B,C, MG Block in BGH at Bokaro Steel City Jharkhand

Providing and laying cement concrete in retaining walls, return walls, walls

(any thickness) including attached pilasters, columns, piers, abutments,

pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed

1 4.2.2 blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor cum 42.913 9793.75 420281.52

five level, excluding the cost of centering, shuttering and finishing

Centering and shuttering including strutting, propping etc. and removal of

Shelves (Cast in situ)

Steel reinforcement for R.C.C. work including straightening, cutting,

bending, placing in position and binding all complete upto plinth level.

Thermo Mechanically Treated bars of grade Fe-500D or more

Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5

4 6.32.2 in superstructure above plinth level up to floor five level in : Cement mortar cum 17.58 8190.9 144028.82

1:6 (1 cement : 6 coarse sand)

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded

and prepolished, machine cut for kitchen platforms, vanity counters, window

sills, facias and similar locations of required size,approved shade, colour and

texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse

8.2 sand), joints treated with white cement, mixed with matching pigment, epoxy

touch ups, including rubbing, curing, moulding and polishing to edges to give

high gloss finish etc. complete at all levels.

8.2.2 Granite stone slab colour black, Cherry/Ruby red

Providing and fixing 18mm thick gang saw cut ( premoulded and prepolished)

machine cut for kitchen platforms, vanity counters, window sills, facias and

similar locations of required size of approved shade, colour and texture laid

over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with

joints treated with white cement, mixed with matching pigment, epoxy touch

7 8.2.2.2. ups, including rubbing, curing, moulding and polishing to edge to give high sqm 35.20 4425.35 155772.32

gloss finish etc. complete at all levels.

Granite of any colour and shade

Area of slab over 0.50 Sqm.( For Counter)

8 8.3.2 Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., Rmt 35.20 418.85 14743.52

including machine polishing to edge to give high gloss finish etc. complete as

per design approved by Engineer-in-Charge.

9 8.4 Extra for fixing marble / granite stone over and above corresponding basic Rmt 3.52 475.55 1673.94

item, in facia and drops of width upto 150mm with epoxy resin baesd

adhesive including cleaning etc. complete.

SL NO ITEM DESCRIPTION UNIT QTY AMOUNT

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:

15622 (thickness to be specified by the manufacturer), of approved make, in

all colours, shades except burgundy, bottle green, black of any size as

approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12

10 8.31 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing sqm 2482.50 1063.45 2640014.63

with grey cement slurry @ 3.3kg per sqm, including pointing in white cement

mixed with pigment of matching shade complete

Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded

stone aggregate 20 mm nominal size), including finishing complete

SL NO ITEM DESCRIPTION UNIT QTY AMOUNT

Providing wood work in frames of doors, windows, clerestory windows and

other frames, wrought framed and fixed in position with hold fast lugs or with

12 9.1.1 dash fasteners of required dia & length (hold fast lugs or dash fastener shall cum 1.50 131576.95 197365.43

be paid for separately)

Second class teak wood

Providing and fixing ISI marked flush door shutters conforming to IS :2202

(Part I) non-decorative type, core of block board construction with frame of

1st class hard wood and well matched commercial 3 ply veneering with

vertical grains or cross bands and face veneers on both faces of shutters:

35 mm thick including ISI marked Stainless Steel butt hinges

with necessary screws

Extra for providing lipping with 2nd class teak wood battens 25 mm

14 9.23 minimum depth on all edges of flush door shutters (over all area of door sqm 64.26 401.4 25793.96

shutter to be measured).

Providing and fixing IS : 3564 marked Aluminium die cast body tubular type

universal hydraulic door closer with necessary accessories and screws etc.

Providing and fixing aluminium tower bolts ISI marked anodised (anodic

coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to

required colour or shade with necessary screws etc. complete :

Providing and fixing aluminium pull bolt lock, ISI marked, anodised (anodic

coating not less than grade AC 10 as per IS : 1868) transparent or dyed of

18 9.98 required colour and shade, with necessary screws bolts, nut and washers etc. Each 44.00 89.9 3955.60

Providing and fixing aluminium handles of approved make anodized

19 9.100 (anodic coating not less than grade AC 10 as per IS : 1868) transparent or

dyed to required colour or shade with necessry screws etc. complete.

Providing and fixing aluminium hanging floor door stopper ISI marked

anodised (anodic coating not less than grade AC 10 as per IS : 1868)

transparent or dyed to required colour and shade with necessary screws etc.

23 9.101.1 Single rubber stopper Each 44.00 35.5 1562.00

Providing and fixing factory made P.V.C. door frame of size 50x47mm with a

wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet

mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm

M.S. square tube, the vertical door profiles to be reinfoorced with 19x19mm

M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be

provided through out the frame. The door frame to be fixed to the wall using

M.S. screws of 65/100mm size complete as per manufacturers specification

and direction of Enginner-in-Charge.

SL NO ITEM DESCRIPTION UNIT QTY AMOUNT

Providing & fixing factory made panel PVC door shutter consisting of frame

made out of M.S. tubes of 19 gauge thickness and size of 19mm . 19mm for

styles and 15x15mm for top & bottom rails, M.S. frame shall have a coat of

steel primers of approved make and manufacture. M.S. frame covered with

5mm thick heat moulded PVC 'C' channel of size 30mm thickness, 70mm

width out of which 50mm shall be flat and 20mm shall be tapered in 45

degree angle on eigher side forming styles: and 5 mm thick, 95mm wide PVC

sheet out of which 75mm shall be flat and 20mmshall be tapered in 45 degree

on the inner side to form top and bottom raiil and 115mm wide PVC sheet out

of which 75mm shall be flat and 20mm shall be tapered on both sides to form

lock rail. Top, bottom and lock rails shall be provided eigher side of the panel.

9.120 10mm (5mm x 2) thick, 20mm wide cross PVC sheet be provided as gap insert

for top rail & bottom rail. paneling of 5 mm thick both side PVC sheet to be

fitted in the M.S. frame welded / sealed to the styles & rails with 7mm

(5mm+2mm) thick x 15mm wide PVC sheet beading on inner side, and joined

together with solvent cement adhesive. An additional 5mm thick PVC strip of

20mm width is to be stuck on the interior side of the 'C' Channel using PVC

solvent adhesive etc. complete as per direction of Engineer-in-charge.

Manufacturer's specification& drawing.

25 9.120.2 30 mm thick pre laminated PVC door shutters sqm 129.99 2455.10 319150.00

Structural steel work in single section, fixed with or without connecting

plate,including cutting, hoisting, fixing in position and applying a priming coat

of approved steel primer all complete

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm

angle iron and 3 mm M.S. gusset plates at the junctions and corners, all

necessary fittings complete, including applying a priming coat of approved

27 10.5.1 Using M.S. angels 40x40x6 mm for diagonal braces sqm 69.30 4781.15 331333.70

GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of

size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having

galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area

with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5,

electro statically polyester powder coated of thickness 60 microns

(minimum), including factory painted after bending and perforation, and

backed with a black Glass fiber acoustical fleece.

6 mm cement plaster of mix :

1:3 (1 cement: 3 fine sand)

15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1

cement: 4 coarse sand)

Extra for providing and mixing water proofing material in cement plaster

31 13.21 work in proportion recommended by the manufacturers. 50KG Cement

Providing and applying white cement based putty of average thickness 1

32 13.80 mm, of approved brand and manufacturer, over the plastered wall surface to sqm 2151.50 123.85 266463.28

prepare the surface even and smooth complete

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic

Compound ) content less than 50 grams/ litre, of approved brand and

33 13.82.2 manufacture, including applying additional coats wherever required, to sqm 4137.50 116.05 480156.88

achieve even shade and colour.

34 13.50.1 Applying priming coat : With ready mixed pink or Grey primer of approved sqm 88.00 61.45 5407.60

brand and manufacture on wood work (hard and soft wood)

35 13.99.1 Painting with synthetic enamel paint of approved brand and manufacture of sqm 88.00 86.55 7616.40

required colour to give an even shade : One or more coats on old work

Dismantling works

SL NO ITEM DESCRIPTION UNIT QTY AMOUNT

Cutting holes of required size in brick masonry wall for fixing of exhaust fan

including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and

making good the same etc. complete as per direction of Engineer-in-charge.

Dismantling W.C. Pan of all sizes including disposal of dismantled materials

37 14.82 i/c malba all complete as per directions of Engineer-in Charge. each 157.00 110.70 17379.90

Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes

(within 50 metres lead) as per direction of Engineer in-Charge.

(a) Internal Work- Exposed on wall

Taking out existing wooden door shutter, repair by cutting, painting etc. and

refixing of repaired door shutters to existing door frames, including

replacement of hinges with screws, etc. as required, all complete as per the

direction of the Engineer-in-charge

Demolishing brick work manually/ by mechanical means including stacking of

serviceable material and disposal of unserviceable material within 50 metres

lead as per direction of Engineer-in-charge. In cement mortar

Dismantling doors, windows and clerestory windows (steel or wood) shutter

including chowkhats, architrave, holdfasts etc. complete and stacking within

Of area 3 sq. metres and below.

42 15.12.2 Of area beyond 3 sq. metres each 20.00 414.55 8291.00

Taking out doors, windows and clerestory window shutters (steel or wood)

43 15.13.1 including stacking within 50 metres lead : Each 22.00 118.30 2602.60

Of area 3 sq. metres and below

Dismantling tile work in floors and roofs laid in cement mortar including

stacking material within 50 metres lead.

For thickness of tiles 10 mm to 25 mm

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including

45 15.52 stacking of useful materials near the site and disposal of unserviceable materials each 83.00 744.60 61801.80

within 50 metres lead.

Dismantling old plaster or skirting raking out joints and cleaning the surface

46 15.56 for plaster including disposal of rubbish to the dumping ground within 50 sqm 587.70 45.05 26475.86

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and

false ceiling including disposal of unserviceable material and stacking of

serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Disposal of building rubbish / malba / similar unserviceable, dismantled or

48 15.60 waste materials by mechanical means, including loading, transporting, cum 200.00 219.35 43870.00

unloading to approved municipal dumping ground or as approved by Engineer-

in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

5 Aluminium works

Providing and fixing aluminium work for doors, windows, ventilators and

partitions with extruded built up standard tubular sections/appropriate Z

sections and other sections of approved make conforming to IS: 733 and IS :

1285, fixed with rawl plugs and screws or with fixing clips, or with

expansion hold fasteners including necessary filling up of gaps at junctions,

at top, bottom and sides with required PVC/neoprene felt etc. Aluminium

sections shall be smooth, rust free, straight, mitred and jointed echanically

wherever required including cleat angle, Aluminium snap beading for

glazing / paneling, C.P. brass / stainless steel screws, all complete as per

architectural drawings and the directions of Engineer-in-charge. Glazing and

paneling to be paid for separately) :

21.1.1 For fixed portion.

Powder coated aluminium (minimum thickness of powder coating 50

For shutters of doors, windows & ventilators including providing and fixing

hinges/ pivots and making provision for fixing of fittings wherever required

including the cost of EPDM rubber / neoprene gasket required (Fittings shall

be paid for separately)

SL NO ITEM DESCRIPTION UNIT QTY AMOUNT

Powder coated aluminium (minimum thickness of powder coating 50

Providing and fixing glazing in aluminium door, window, ventilator shutters

and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per

the architectural drawings and the directions of engineer-in-charge . (Cost of

aluminium snap beading shall be paid in basic item):

With float glass panes of 4 mm thickness

With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) 121.00 1325.55

SL NO ITEM DESCRIPTION UNIT QTY AMOUNT

Providing and laying water proofing treatment in sunken portion of WCs,

bathroom etc., by applying cement slurry mixed with water proofing cement

compound consisting of applying :

(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing

cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for

(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water

proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air

cure for 4 hours followed with water curing for 48 hours. The rate includes

preparation of surface, treatment and sealing of all joints, corners, junctions

of pipes and masonry with polymer mixed slurry

Providing and fixing factory made 18 mm thick single extruded WPC (Wood

Polymer Composite) solid plain white colour board Jali, CNC (Computer

numeric control) routed of approved design by Engineer-in -charge which are

machine cut for duct/shaft covering, partitions and facades comprising of

virgin polymer of K value 58-60 (Suspension Grade), calcium corbonate and

natural fibers (wood powder/ rice husk/wheat husk) and non toxic

additives(maximum toxicity index of 12 for 100 gms) having minimum density

of 650 kg/cum and screw withdrawal strength of 1800 N (Face) minimum

compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and

resistance to spread of flame of Class A category with properties of being

termite/borer proof, water/moisture proof and fire retardant and fixing on

M.S (mild steel) frame made of 25 x 25 x 1.5 mm square hollow box section

including applying a priming coat of approved steel primer, placed at grid

made at 1.0 x 1.0 m or as per requirement at site with necessary stainless

steel fasteners and SS screws etc., all complete as per direction of Engineer-In-

(Note: M.S (mild steel) framework with priming coat and necessary SS

fasteners and SS screws shall be paid separately.

Total of the Sub-Head - Civil Works: 21,722,293.00

COST ESTIMATE [S&P works based on DSR 2021 and Electrical works based on DSR 2022]

Name of Work- Comprehensive repair of Toilets in BGH, Bokaro Steel City

Building Category- Non-Residential Buildings / Hospitals

SL NO ITEM DESCRIPTION UNIT QTY RATE AMOUNT

Sanitary & Plumbing

SUBHEAD-I(Sanitary Fixtures & CP Brass Fittings) DSR 2021

17.1 Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm

sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including

flush pipe, with manually controlled device (handle lever) conforming to IS : 7231,

with all fittings and fixtures complete, including cutting and making good the walls

and floors wherever required:

1 17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type

foot rests Each

2 17.78 Providing and fixing white vitreous china extended wall mountingwater closet of size Each

780x370x690 mm of approved shape including providing & fixing white vitreous

china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 34 13036.55 443242.7

4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc

3 17.22A Providing and fixing CP Brass 32 mm size Bottle Trap of approved quality & make Each

and as per the direction of Engineer-in-charge.

4 17.4.1 Providing and fixing white vitreous china flat back or wall corner type lipped front Each

urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with

automatic flushing cistern with standard flush pipe and C.P. brass spreaders with

brass unions and G.I clamps complete, including painting of fittings and brackets,

cutting and making good the walls and floors wherever required

One urinal basin with 5 litre white P.V.C. automatic flushing cistern

5 17.16A Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long Each

with S.S. triangular plate to Eureopean type W.C. of quality and make as approved 34 299.35 10177.9

by Engineer - in - charge.

17.28 Providing and fixing P.V.C. waste pipe for sink or wash basin including

6 17.28.2 Flexible pipe

8 17.31 Providing and fixing 600x900 mm beveled edge mirror of superior glass (of Each

approved quality) complete with 6 mm thick hard board ground fixed to wooden

cleats with C.P. brass screws and washers complete.

SUBHEAD III(Water Supply System(Internal)) DSR 2021

18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal

stability for hot & cold water supply, including all CPVC plain & brass threaded

fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of

pipes & fittings with one step CPVC solvent cement and the cost of cutting chases

and making good the same including testing of joints complete as per direction of

Engineer in Charge.

Concealed work, including cutting chases and making good the walls etc(inside

9 18.8.1 15 mm nominal dia Pipes Mtr 657.98 441.15 290268

10 18.8.2 20 mm nominal dia Pipes Mtr 658.27 513.75 338184

11 18.8.3 25 mm nominal dia Pipes Mtr 89.81 626.05 56223

12 18.8.4 32 mm nominal dia Pipes Mtr 89.83 712.75 64026

18.18 Providing and fixing ball valve (brass) of approved quality, High or low pressure,

with plastic floats complete :

13 18.18.3 25mm i/d Brass Ball valves Each 10 399.15 3991.50

18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality

(screwed end) :

Total of the Sub-Head - Sanitary: 1,759,040.75

SL NO ITEM DESCRIPTION UNIT QTY RATE AMOUNT

Electrical SCHEDULE ITEMS

SL NO ITEM DESCRIPTION UNIT QTY RATE AMOUNT

WIRING AND SUB MAINS DSR 2022

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm

FRLS PVC insulated copper conductor single core cable in surface / recessed heavy

1.3.3 class Steel conduit, with modular switch, modular plate, suitable GI box and earthing Point 782.00 1845.00 1442790.00

the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc

as required.a) Group C

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor

1.5 single core cable in surface/ recessed Steel conduit alongwith 1 No 4 sq. mm FRLS meter 330 433.00 142890.00

PVC insulated copper conductor single core cable for loop earthing as required

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor

1.6 single core cable in surface/ recessed Steel conduit alongwith 2 Nos 4 sq. mm FRLS metre 330 662.00 218460.00

PVC insulated copper conductor single core cable for loop earthing as required.

18 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of

1.7 FRLS PVC insulated copper conductor, single core cable in surface/ recessed Steel

conduit as required.

20 1.7.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire metre 440 428 188320.00

21 1.7.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire metre 40 589 23560.00

22 1.7.5 2 X 10 sq. mm + 1 X 6 sq. mm earth wire metre 40 710 28400.00

23 1.7.9 4 X 6 sq. mm + 2 X 6 sq. mm earth wire metre 40 924 36960.00

25 Supplying and fixing suitable size GI box with modular plate and cover in front on

surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket

outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to

be used in non residential buildings).

Supplying and fixing suitable size GI box with modular plate and cover in front on

1.32 surface or in recess, including providing and fixing 6 pin 15/16 amps modular socket Each 22 586.00 12892.00

outlet and 15/16 amps modular switch, connection etc. as required.

27 Supplying and fixing of following modular switch/ socket outlet on the existing

Modular plate & switch including connection but excluding modular plate etc. as

29 1.24.4 3 pin 5/6 amp socket outlet Each 44 122 5368.00

31 1.24.5 6 pin 15/16 amp socket outlet Each 22 197 4334.00

32 Supplying and fixing following size/ modules, GI box Boxes alongwith modular base

1.27 & cover plate for modular switches in recess etc as required.

39 Supplying and fixing of modular Blanking plate on the existing modular plate &

switch box excluding modular plate etc. as reqd.

40 Supplying and fixing of following sizes of heavy class PVC conduit along with

1.21 accessories in surface/recess including cutting the wall and making good the same in

case of recessed conduit as required.

SL NO ITEM DESCRIPTION UNIT QTY RATE AMOUNT

Supplying and fixing following way, single pole and neutral, sheet steel, MCB

distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar,

neutral bus bar, earth bar, din bar, interconnections, powder painted including

2.3 earthing etc. as required. (But without MCB/RCCB/Isolator)

2.3.2 8 way, Double door Each 6 2573 15438.00

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing

MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, double pole, 240 V,isolator in the existing MCB

DB complete with connections, testing and commissioning etc. as required.

43 Supplying and fixing following rating, double pole, (single phase and neutral), 240

volts, residual current circuit breaker (RCCB), having a sensitivity current upto 30

milliamperes in the existing MCB DB complete with connections, testing and

commissioning etc. as required.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit

2.10 breaker suitable for inductive load of following poles in the existing MCB DB

complete with connections, testing and commissioning etc. as required.

a 2.10.1 Single pole Each 90 256.00 23040.00

45 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc.

Total of the Sub-Head -Electrical 2,607,653.00

Non Schedule Items- Plumbing

Supply, installation , testing commissioning of PP Mineral filled low noise Soil &

Waste system as per EN 12056, with density 1.9 g/cm3. PP mineral(Astolan)

filled Low noise system should has a fire classification DIN 4102-B2/EN13501 .

Product should have a chemical resistance of pH 2-12 and is a complete sound

protection system according to DIN 4109. including with push fit rubber ring

sockets all necessary fittings and specials such as Bends, junctions, offsets &

vent cowl. Fixing at wall/ceiling level supported by rubber line bracket & hangers

etc. duly epoxy coated. Cutting, chases/holes in floors / walls / slab.Compliant with

LABC. Weight mass per unit area of DN100MM should not be less than

110.07kg/m3. sound levels of not more than 15dBA as per EN 14366 at a flow

rate of 4 l/s.including all core cut ,chases ,cutting making holes in all wall and floor

as required complete in all respect.

50 NS-5 Providing Fixing straight /offset type single body push fit type WC pan connector with

factory supplied spring loaded seal guard with integral single mould sealing fins

made of flexible EVA body, including bush/adaptor as supplied with the pan

connector (if required). Each 83 800.00 66400

51 NS-6 Providing and fixing floor drain (FD) with 50mm/40mm outlet and one 40mm inlet

for waste, with SS grating (adjustable height), having 50mm water seal and in-built

Providing and fixing PP/UPVC trap of self cleansing design with screwed down or hinged

grating with or without vent arm complete, including cost of cutting and making good the

walls and floors :

100 mm inlet and 100 mm outlet

52 NS-7 Sand cast iron S&S as per IS: 3989 Each 19 1655.00 31445

Providing and fixing PP/UPVC grating with Cockroach proof strainer of approved

design including setting in floor with cement motor to match with floor finish as per

architect requirement suitable for waster and FT.

SL NO ITEM DESCRIPTION UNIT QTY RATE AMOUNT

Providing and fixing PP/UPVC brass grating with frame of approved design

including setting in floor with cement motor to match with floor finish as per

architect requirement.

55 NS-10 Providing and fixing PP/UPVC extention piece for 100 mm dia floor trap formed out

of main pipe with multiple side inlets, suitable for various dia pipes including all

fixtures as required complete as per drawing approved sample and direction of

engineer in charge. Each 44 1655.00 72820

56 NS-11 Providing and fixing Jaguar make ARI-39041 Two way bib cock with wall flange Each

57 NS-12 Providing and fixing Jaguar Make COP-057PM C.P. angular valve Each

58 NS-13 Providing and fixing ESSCO make MQT-514 FKN Concealed Stop cock 20mm Each

59 NS-14 Providing and fixing Jaguar make COP-273PM Short body bib cock Each

60 NS-15 Providing and fixing Jaguar make OHS-1989 Overhead shower Each

61 NS-16 Providing and fixing Jaguar make ALD-573 B138Health Faucet Each

62 NS-17 Providing and fixing Jaguar make ACN-1111SM Towel rail 600 mm long Each

63 NS-18 Providing and fixing Jaguar make AHS-1551 Toilet paper Holder Each

64 NS-19 Providing and fixing Jaguar make CAN-1161N Double coat hook Each

65 NS-20 Providing and fixing Jaguar make SDR-WHT-DJ0010F Soap Container Each

66 NS-21 Providing and fixing Jaguar make CNS-WHT-705 Under Counter basin with Pillar Each

cock and waste coupling 44.00 5442.19 239456.20

Total of the Sub-Head -Plumbing NS 1,974,553.48

Non Schedule Items- Electrical

Light & Exhaust Fixtures

SITC of light fixtures suitable for LED fixture, lamps with all components and

accessories including but not restricted to reflectors, housings, lamp holders

and including cost of ballasts and cost of lamps complete as required and as

below Make:-Bajaj,Havells,Polycab or equivalent.

67 NS-22 20W LED Tube light of Havells Cat Ref: LUMILINESMART20WLED865PCWH

68 NS-23 Recessed mounted 12W Downlighter of Havells Cat Ref:Havells

GLOWDLR12WLED857S or equivalent.

69 NS-24 15W Mirror Light of Havells Cat Ref: LUMILINEXS17WLED865SPCWH or

Supplying of under note sizes of heavy duty exhaust fans complete with fan

motor, blades fixing frame, louver etc as required of havells makes or

71 NS-26 450 mm exhaust fan 900 RPM Each 44.00 2967.68 130577.81

Total of the Sub-Head -Plumbing NS 1,829,688.64