Comprehensive Repair and Maint to roof water seepage Sunken flooring Joinery works and Certain repairs work at OTM / MD Accn in the area of AGE B/R I under GE (N) Ahmednagar

Amount

Dismantling of asbestos cement or steel sheet (corrugated semi corrugated) sheets in roof covering etc complete all as specified and directed by Engineer-in-Charge

M&L mild steel tubular work as in posts, purlins rafter etc.using ERW or induction butt welded tubes fixed in repairs etc complete all as specified and directed by Engineer-in-Charge

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tenstile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and directed by Engineer-in-Charge

S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.5mm thick of an colour having tenstile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and directed by Engineer-in-Charge

S & F for mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed alusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 etc complete all as specified and directed by Engineer-in-Charge

Material and labour for two coats of synthetic enamel paint over a coat of red oxide primer for new/old steel surfaces of any description exc 10 cm width or girth including preparation of surfaces etc complete all as specified and directed by Engineer-in-Charge

Material and labour for special treatment ot sunken portion with 10mm thick plaster in CM 1:4 with WPC liquid complast 421 and applying one coat each of Nittoproof 120 on plastered surface rendering again 10mm thick in CM 1:4 mixed with complast - 421 filling the sunken floor with PCC 1:5:10 using brick bat area of floor upto 1.5 Sqm including 40 mm dia 0.60 m pipe etc complete all as specified and directed by Engineer-in-Charge Note : Work has to be carried out strictly by the authonticated applicator of the manufacturer and as per manufacturers specification as approved by GE.

M & L for Plastering 10 mm in CM 1:3 using 100% course sand on roof mixed with & including M & L for WPC @ 3% by weight of cement and finished the surfaces even and smooth without using extra cement etc complete all as specified and directed by Engineer-in-Charge

Material and labour for providing water proofing treatment on roofs, as per manufecturer's instructions and as specified after taking down/out as existing at site: (a) Cleaning the newly plastered surfaces with wire brushes and applying a coat of bituminous primer @ 0.30 ltrs/sqmts and allow to dry. (b) Applying and laying torch APP polymer modified bituminous membrance 3 mm thick with non woven polyster matt as reinforced weighing not less than 3 kg/sqmts by thermofusion process as per manufacturers specification including applying one coat of aluminium paint. (c) Cutting out cracks to V section in existing roofs or terracing cleaning out and filling solidily with hot mixture of bitumen and clean dry sand (1:1) (by weight) (i) Authenticated applicator & Ponding test shall be carried out and shown to the GE for leak proof treatment

Taking up and down 15 mm bore GI tubing and connection including cleaning for re-fixing or removing to store etc complete all as specified and directed by Engineer-in-Charge

All as per Sl item No 10 (here- in- before) but 20 mm bore etc complete all as specified and directed by Engineer-in-Charge

S & F tubes medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors 15 mm bore of pipe etc complete all as specified and directed by Engineer-in-Charge

All as per Sl item No 12 (here-in-before) but 20 mm bore of pipe etc complete all as specified and directed by Engineer-in-Charge

M&L Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand etc complete all as specified and directed by Engineer-in-Charge

Material and labour for 75 mm thick plain cement concrete 1:4:8 type D2, using 40 mm graded stone aggregate as in sub base etc complete all as specified and directed by Engineer-in-Charge

Dismantling of water tanks from any position/location, of any make etc,of capacity exc 500 Ltr & n.exc 1000Ltr with ball valve, etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to irin pipr and connecting etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs to 9ft pulley operated cloth drying system aluminium anodised 20mm dia pipes channel assembly, looking system to hide rope knot, ropes 4mm dia HDPE double core & fitting material etc complete all as specified and directed by Engineer-in-Charge

Dismantling boarding, any description, fixed in wall or ceiling, any position with nails etc complete all as specified and directed by Engineer-in-Charge

S&F powder coated aluminum alloy interlocking snap grid 600mmx600mm consists of min tee runners of size 38mm x 25mm x1.5mm and cross Tee of size 25mm x 25mm x 1.5mm spaced between the main Tee at 600mm centre to cntre to form a grid of 600mm x 600mm etc complete including GI wire hangars at 1200 mm intervals all as specified as per manufacturere's instructions etc complete all as specified and directed by Engineer-in-Charge

S&F in repair for 4mm thick non asbestos fibre cement building boards of make 'E' board classic designer board (cascade or Occenic) of M/s Everest Industries Ltd of equivalent as approved fixed or laid/inserted to timber/GI/Aluminium frame work with etc complete all as specified and directed by Engineer-in-Charge

Demolition of plain cement concrete solid block /brick masonary built in cement mortar etc complete all as specified and directed by Engineer-in-Charge

Material and labour for Pre-cast cement concrete block type C1 1:3:6 20mm graaded masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6 etc complete all as specified and directed by Engineer-in-Charge

Material and labour for rendering, 15 mm thick on stone/brick / concrete surfaces in cement mortar 1:6 surfaces finished even and smooth without using extra cement etc complete all as specified and directed by Engineer-in-Charge

Dismantling floor, hearth or wall tiling including cement morter bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed by Engineer-in-Charge

Material and labour for non skid ceramic coloured tiles, 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor laid over and including 15 mm thick screed bed in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

Material and labour for glazed ceramic coloured tiles of size 350 X 250 mm X 7 mm/450x350x7mm thick on vertical surfaces as in dados laid over and including a backing coat of 10 mm thick in cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

Material and labour for light shade vitrified ceramic tiles, 8mm thick (square/ rectangular) polished, area of each tile not exceeding 0.38 sqm, in floors etc. laid over and including 15 mm thick screed bed in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

All as per item No 28 (here-in-before) but on skirting

Material and labour in repairs for granite slab, 20 mm thick laid over and including 15 mm thick screed in cement mortar 1:6, jointed and pointed with coloured cement to match on kitchen platform, shelves, window sills etc including grinding and polishing the exposed edges etc complete all as specified and directed by Engineer-in-Charge

S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engineer-in-Charge

S&F powder coated anodised aluminium glazed window shutter/ventilators side hung / sliding type, without sash bars, aluminium sections weighing 0.25 kg/m aluminium open track section having reqd size of style and top rails, bottom rails including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 No.) suitable handle (1 No.) etc complete all as specified and directed by Engineer-in-Charge (Note : Glass will measured and paid separately)

M&L 4.00mm thick sheet glass, ordinary quality and glazing with alumunium strip/rubber bidding in square to glass panes as per instructions of manufacturers etc complete all as specified and directed by Engineer-in-Charge

M&L for Providing and laying at or near ground level factory made kerb stone including fluorescent colour painting of grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required etc complete all as specified and directed by Engineer-in-Charge

M&L for fixing Building boards wall cladding panels (Everest) 8mm thick designer colour with necessary frame work including necessary cutting as per specification / drawing to external surfaces of wall over a plastered surface to prepare the wall surface at any height including scaffolding etc complete all as specified and directed by Engineer-in-Charge

M&L for fixing Aluminium Composite panels sheet plain / designer colour having 3mm to 4mm thickness including necessary powder coated frame work and necessary bending and cutting as per specification / drawings to external surfaces prepare the wall surface at any height including scaffolding etc complete all as specified and directed by Engineer-in-Charge

S&F MS delinators SVD - 3, 1200mm long 75mm dia MS pipe medium grade with HIP 75mm around. Three strip of 50mm wide (each strip) and with mesh, with yellow, green, red, Hi retro reflective tape, etc complete all as specified and directed by Engineer-in-Charge Note : The rate quoted is deemed to include for excavation and PCC 1:2:4, B2 of size 300 x 300 x 600 mm.

M&L for Complete removal of existing treatment on plastered surface and applying alayer of POP putty of 2mm thick over a plastered surface to prepare the surface even and smooth at any height incl scaffolding etc complete all as specified and directed by Engineer-in-Charge

M & L for preparation of old surfaces of walls, washing down and applying one coat of Oil bound distemper (OBD) etc complete all as specified and directed by Engineer-in-Charge

M&L for Preparing old painted surfaces of wall and applying one coats of cement based paint etc complete all as specified and directed by Engineer-in-Charge

M&L for preparation of old/new surface of walls kerb stone and concrete surface & applying one coats of fluorescent paint exterior grade on wall etc complete all as specified and directed by Engineer-in-Charge

M&L for preparation of old/new surface of walls and concrete surface & applying one coats of acrylic (antifungal) exterior grade paint on wall etc complete all as specified and directed by Engineer-in-Charge

An amount of Rs 23,835.00 shall be deducted from BOQ on account of schedule of credit

M/s A G Gund

HG PATHAN CONSTRUCTION COMPANY

N. H. Saluji & Associates