Internal painting and Miscellaneous Repair works of Type-II B quarters at Right bank Balutar colony, Teesta V Power Station.

Amount

Earth work in excavation by mechanical means (Hydraulic Excavator)/manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Providing and Laying in position cement concrete of specified grade including compacting curing etc all complete. 1:2:4 mix. (1 cement, 2 coarse sand, 4 graded stone aggregate of 20mm & down size).

Providing and Laying in position specified grade of reinforced cement concrete excluding the cost of form work, finishing and reinforcements. : 1:1.5:3 Mix (1cement, 1.5 coarse sand 3 graded stone aggregate 20mm and down nominal gauge)

Providing and Laying 12mm thick cement plaster of specified mix in single coat including finishing even and smooth and curing complete. 1:5 mix.

Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber) : Beam, lintels, girders, brersumers and cantilevers.

Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber) : Foundation, footings, base of column etc for mass concrete.

Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber) : Floor slab, roof slab, landing, balcony and access platform.

Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber) : Square columns

Providing fitting and fixing water proof flush doors shutters, solid block hard core construction with frame of 1st class hard timber, with well matched 3mm commercial ply (both faces) including hinges with screws complete 32mm

Providing, fitting and fixing sliding door bolts with nuts and screws etc. complete. MS 250x16mm Size Brass (bright Finish)

Providing, fitting and fixing. Tower bolts 250x10mm with necessary screw etc complete.. Brass (Bright Finish)

Providing and fixing Tower bolt 150x10mm with necessary screws etc complete. Brass(Bright Finish)

Providing, fitting and fixing handles 125mm size with necessary screws etc complete. Brass (Bright Finish)

Providing and fixing 100mm mortise lock with 6 levers and pair of handles with necessary screws etc complete Brass (B.F)

Supplying, bending and placing in position tor- steel reinforcement in all R.C.C works including cost of binding wires, all complete.

Providing and applying priming coat with ready mixed pink on timber work including preparation of the surface by thoroughly cleaning and sand papering etc complete.

Providing and painting with ready mixed paint of approved quality and shade with two or more coats to give an even and smooth shade including clearing the surface complete on new surface.

Providing and painting with ready mixed paint of approved quality and shade with two or more coats to give an even and smooth shade including cleaning the surface complete on old surface.

Providing and distempering with oil bond washable acrylic distemper on old surface of approved brand and manufacture to give an even shade including preparation of surface etc complete.

Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO / EQUIVALENT) BIB COCK 15 MM DIA

Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO / EQUIVALENT)ANGULAR STOP COCK 15 MM DIA

Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO / EQUIVALENT) BIB COCK LONG BODY 15 MM DIA

Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO / EQUIVALENT) CONNECTING PIPE

Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO / EQUIVALENT) SHOWER ROSE WITH ARM

Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO / EQUIVALENT) BASIN MIXTURE

Providing and placing on terrace high density polyethylene water storage tank with man hole lid and suitable locking arrangement including making holes for inlet, out let and ball cock including testing etc. all complete: (Sinter or equivalent) 1000 LITERS CAPACITY

Providing, Fitting and fixing ball valve ( Brass) of approved quality complete with high or low pressure with plastic floats:

Providing, fitting and fixing. white vitreous china water closet (W.C) squatting pan (Indian type) 580mm size with 100mm SCI (Sand cast iron) P or Strap, 10 ltr low level flushing cistern with fittings, CI brackets, 32mm flush pipe with fittings and clamps, 20mm overflow pipe,cutting and making good the wall and floor etc complete. Long type or Orrisa type pan. Orissa Pan 58x44 Special CAT NO 20004

Providing, fitting and fixing white vitreous china pedestal (European type) water closet (W.C) pan with seat and lid, with C.P. brass hinges, 10ltr low level cistern with fittings and brackets 40mm flush bend, 20mm overflow pipe with specials, including Providing and painting and making good the wall and floors as required all complete: W.C. pan European Bidets standard CAT NO 30001

Providing, fitting and fixing. white vitreous white china wash flat back basin with CI brackets, painted, 15mm CP brass pillar taps, CP brass chain with rubber plug, 32mm CP brass waste pipe, lead or PVC connection 32mm dia CP brass cap and unions, complete including cutting and making good the walls wherever required. HINDWARE One wash basin with two pillar cock. (63 cm x 45 cm)

P/F stain less steel kitchen sink with CI brackets, CP brass chain with rubber plug 40mm CP brass waste, CP brass tap etc complete i/c the fittings, cuttings and making good the wall wherever required. 610 x 450 x 200 mm.

Providing and fitting of slandered size mirror of quality equivalent to Admiral and size 20"x16" complete

Providing, fitting and fixing. of chromium plated soap dish with necessary screw etc all complete.

Providing, fitting and fixing towel rail of chromium plated brass complete with brackets fixed to the timber cleats, CP brass screws complete. 740 x 20 mm

Providing, fitting and fixing soil waste and vent pipes including testing etc complete. 100 mm dia. PRINCE / SUPREME or equivalent soil pipe

Providing, fitting and fixing soil waste and vent pipes including testing etc complete. 75 mm dia. PRINCE / SUPREME or equivalent soil pipe

Providing, fitting and fixing bends of various types plain or a band with access door, insertion rubber washer 3mm thick bolts and nuts complete SCI or centrifugally cost spun sands pipes. 100 mm dia. Supreme / Prince

Providing & Laying white or colored glazed tiles size (600mm*600mm or above) anti skid of kajaria/Johnson/Somany/NITCO or equivalent of in flooring, treads of steps landing etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry.

Providing and laying white or colored glazed vitrified tiles(size 600mmx600mm or above) of kajaria/Johnson/Somany/NITCO or equivalent colours white, grey, ivory, platinum, cream, glacier white, summersand, beach, wood duro, melody, or equivalent) in walls, skirting, risers of steps and Dados on 12mm thick cement plaster. (1cement, 3coarsed sand) 1:3 bare and jointed with white cement slurry.

Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (Cera CL 206 / EQUIVALENT) 2-Way Bib Cock With Wall Flange Twin Elbow Valve Faucet (Wall Mount Installation Type)

Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete.-With 2nd class teak wood beading 62X19 mm

Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete.-With 12 mm mild steel U beading

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes

6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes

TSHERING GYATSO LEPCHA

Dilip Kumar Chettri