Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.1 LAccepted-AOC GP RAM COLONY AMRITSAR JALANDHAR 144103 | AMRITSAR | AMRITSAR | PUNJAB | 144103 | L1 | Accepted-AOC L1 | |
| 2 | L2₹43.7 L+₹1.7 L (4.01%)Rejected-Finance 0000 UNNAMED ROAD GAJIYA KANTIT VINDHYACHAL MIRZAPUR UTTAR PRADESH 231307 | MIRZAPUR | UTTAR PRADESH | 231307 | L2 | Rejected-Finance Other than lowest. | |
| 3 | L3₹44.1 L+₹2.1 L (5.09%)Rejected-Finance NEAR RAILWAY CROSSING ADAMPUR DOABA JALANDHAR JALANDHAR PUNJAB 144103 | JALANDHAR | PUNJAB | 144103 | L3 | Rejected-Finance Other than lowest. | |
| 4 | L4₹44.9 L+₹2.9 L (6.93%)Rejected-Finance | L4 | Rejected-Finance Other than lowest. | |
| 5 | L5₹45.2 L+₹3.2 L (7.65%)Rejected-Finance | L5 | Rejected-Finance Other than lowest. |
Tender Value
Refer Docs
EMD Value
₹89,000
Closing Date
1 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF Adampur
Military Engineer Services AF Stn Adampur 144103
MISC REPAIRS TO SARGENT AND BELOW SMQs AT AF STN ADAMPUR
2023_MES_579601_1
GE/AF/ADM-68/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE AF Adampur
Refer NIT and Tender Documents
9 documents required · 9 mandatory
₹500
GE AF Adampur
₹89,000
Yes
9 Mar 2023
7 Feb 2023
2 Mar 2023
16 Feb 2023
1 Mar 2023
16 Feb 2023
8 Feb 2023 - 15 Feb 2023
Amount
PCC type D-2 (1:4:8), using 40 mm graded stone aggregates as in filling & mass concrete, complete all as specified.
Reinforced cement concrete, type B-1,(1:2:4), using 20 mm graded stone aggregates as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified.
Brick work using bricks as specified in PS-II clause 5.1, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar (1:6), complete all as specified.
Cutting groove in brick wall 75mm wide and 75mm deep & shaping horizontal face of groove with cement mortar (1:3) complete all as specified.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends, or edges of landings etc. and cutting chases for concealed water tubing, concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth, in brick walls, complete all as specified.
Use & waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping) with rough finished surfaces of concrete, complete all as specified.
Factory made 35 mm thick ,2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a);,etc complete all all as specified.
Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, thickness 30 mm,etc complete all all as specified.
Factory made solid PVC Door frame of size 50mm x 47mm made out of 5mm thick wood grain colour PVC sheet reinforced with mild steel square tube, suppling & fixing in opening, complete all as specified.
Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded wood grain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and wood grain colour PVC sheet for top rail, lock rail and bottom rail, panelling of wood grain colour PVC sheet to be fitted in the MS frame welded / sealed to the stile and rails with suitable PVC sheet beading and jointed together with solvent cement as specified in SSR Part II, complete all all as specified.
Aluminium anodised barrel tower bolt of extruded section 150mm long, ISI marked, complete all as specified.
Aluminium alloy, anodised, ISI marked sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy 300 mm long, complete all as specified.
Stainless steel butt hinges100mm long, ISI marked, complete all as specified.
Mild steel helical door spring 200 mm, ordinary rat tail rod pattern including roller and roller plate ISI marked, complete all as specified.
Extruded aluminium anodised handles fabricated type with plate 125 mm long, ISI marked complete all as specified.
Double leg aluminium anodised door stopper with rubber foot, ISI marked and fixed to bottom rail of doors with steel screws, complete.
Stainless steel conduit 20 mm bore, cut to size and erected in position as curtain rod on backets, including SS decorative finials & brackets fixed to walls with PVC rawl plugs & SS screws, IN REPAIRS, complete.
Galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks or galvanized wire staples, all as specified.
Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.
Framed mild steel work such as grills, grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-290-Gde E-165, complete all as specified.
Factory made steel windows with side hung shutter with glazng bars each shutter having 02 No. box type hinges & two nos. tower bolts of size not less than 150 mm size and peg stays, dovetailed or welded, including one shop coat of zink chromate primer complete.
Factory made steel windows with side hung shutter without glazng bars each shutter having 02 No. box type hinges & two nos. tower bolts of size not less than 150 mm size and peg stays, dovetailed or welded, including one shop coat of zink chromate primer complete.
Steel windows or ventilators, fixed type made of MS sheet 1.25 mm thick box type (primer coated) , ERW hollow 'P' section of size 60mm x 25 mm complete all as specified.
NOTES APPLICABLE TO SERIAL ITEM NO. 21 TO 23: (a) Profile section used under these items shall be 'P' tube as shown in drawing No. CE/AF/STD-170/07, CE/AF/STD-171/07 and CE/AF/STD-172/07 as applicable. (b) Cost of one shop coat of zink chromate primer shall be measured and paid for separately under respective item of painting.
Pressed steel frames 105 mm x 60 mm made out mild steel pre-painted white sheet 1.25 mm thick, for doors with one or more rebates including necessary fixing lugs, 100 mm size medium grade mild steel hinges, lock strike plates etc including providing PCC (1:3 :6) type C-0 using 12.5 mm graded crush stone aggregate for filling back of chowkhats complete all as specified.
Pressed steel frames 125 mm x 60 mm made out mild steel pre-painted white sheet 1.25 mm thick, for doors with one or more rebates including necessary fixing lugs, 100 mm size medium grade mild steel hinges, lock strike plates etc including providing PCC (1:3 :6) type C-0 using 12.5 mm graded crush stone aggregate for filling back of chowkhats complete all as specified.
Water Proofing Treatment to RCC sunken surfaces comprising of : -
Rendering 15 mm thick (Average thickness) rendering on sunken surfaes including flashings, finished even and fair in cement mortar (1:4), using water proofing compound as per recommended ratio, after brushing cement slurry @ 1.20 kg/Sq. m, complete all as specified. NOTE: Supply only WPC will be measured & paid for separately under respective item of BoQ.
PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate, laid to slope as directed by Engineer in Charge in sunken portion, complete all as specified.
Water Proofing Treatment to sunken portion all as specified in Particular Specification clause 11.2,complete.
Water Proofing Treatment to RCC roofs comprising of : -
Taking down existing water proofing treatment (any no. of layers) from RCC roofs including cleaning the surface including flashings and junction of parapet etc. with wire brushing & water to the entire satisfaction of EIC, complete all as specified.
PCC (1:2:4) type B-1 using 20 mm graded stone aggregate, laid to slope as directed by Engineer in Charge over RCC roofs as padding, complete all as specified.
Rendering 15 mm thick (Average thickness) rendering on roof surface including flashings and junction of parapets etc., finished even and fair in cement mortar (1:4), using water proofing compound as recommended by manufacturers after brushing cement slurry @ 1.20 kg/Sq. m, complete all as specified. NOTE: Supply only WPC will be measured & paid for separately under respective item of BoQ.
APP based polymeric membrane laid on primed roofs & flashing by forced application using Butane torch and sealing all joints on primed surface by applying hot blown industrial grade bitumen @ 85/25 @ 1.20 kg/Sq.m over a coat of bitumenous primer @ 0.40 litre per square metre over clean RCC/plastered roof surfaces & flashings complete, all as specified.
40 mm thick brick tiles are bedded over 15 mm thick cement mortar (1:4), and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on APP membrane complete all as specified.
40 mm thick brick tiles (Except brick tiles) are bedded over 15 mm thick cement mortar (1:4), and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on APP membrane complete all as specified.
Making benching with PCC (1:2:4) type B-0 (using water proofing compound) along side walls adjoining to roofs, in CONCAVE SHAPE, complete all as specified. NOTE: WPC will be measured and paid for separately under respective item of BoQ.
NOTES APPLICABLE FOR SER ITEM 26 & 27 : (a) Supply only WPC will be measured and paid for separately under respective item of BoQ. (b) For Guarantee of Water Proofing Treatment refer PS clause 11.5 of CA.
uPVC pipes 160 mm external dia, type-A, ISI marked (IS:13592) single socketed in any length with or without rubber ring joints, fixed to walls as RW pipes, IN REPAIRS, complete all as specified.
uPVC/PVC bend / shoe any radius, suitable for uPVC soil waste discharge pipes 160 mm external dia, IN REPAIR, complete all as specified,
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. and brushing neat cement slurry @ 3 kg of cement per Sq.m, complete all as specified.
25 mm thick, cement concrete type B-0, 1:2:4 using 12.5 mm graded stone aggregate, finished even & rough, as in sub floors, complete all as specified.
40 mm thick, cement concrete type B-1, 1:2:4 using 20 mm graded stone aggregate, finished even & rough, as in sub floors, complete all as specified.
75 mm thick, cement concrete type C-1, 1:3:6 using 20 mm graded stone aggregate, finished even & smooth without using extra cement, as in plinth protection, and joints shall be sealed with joint sealing comound grade 'A' complete all as specified.
75 mm thick, cement concrete type D-2, 1:4:8 using 40 mm graded stone aggregate, finished even & rough, as in sub floors, complete all as specified.
Granite jet black shade, 15-18 mm thick,as in step, jambs, cooking platform and like, machine cut, machine polished, bedded and jointed with grey cement slurry & pointed with grout of matching shade including necessary cutting over & including 10 mm thick (average thickness) cement mortar (1:4), complete all as specified.
Rounding of / moulding to edges (half round) of stone of any description including rubbing and polishing (Granite finish), complete all as specified.
Glazed ceramic coloured tiles 7mm thick, area of each tile exc. 0.17 Sq.m but n. exc. 0.19 Sq.m on vertical surfaces as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 10mm thick rendering in cement mortar (1:4), complete all as specified.
Non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exc. 0.11 Sq.m but n. exc. 0.18 Sq.m laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement with pigment to match the shade of tile laid over and including 15 mm thick bedding layer in cement mortar (1:4) complete all as specified.
Non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exc. 0.18 Sq.m but n. exc. 0.38 Sq.m laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement with pigment to match the shade of tile laid over and including 15 mm thick bedding layer in cement mortar (1:4), complete all as specified.
Non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exc. 0.18 Sq.m but n. exc. 0.38 Sq.m on vertical surfaces as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 10mm thick rendering in cement mortar (1:4), complete all as specified.
60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of shape approved by GE, made by table vibratory method using PU mould, laid in required pattern over and including 25mm thick compacted bed of coarse sand, compacting through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete.
Rendering 5 mm thick on RCC or similar surfaces, finished even and smooth on ceilings in cement mortar (1:3), complete all as specified.
Rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:6) complete all as specified.
Rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4), mixed with water proofing compound as per manufacturers instructions, complete all as specified. NOTE: Supply only WPC will be measured & paid for separately under respective item of BoQ.
NOTE APPLICABLE FOR SERIAL ITEM 37 to 44: The contractor will remove all electric fittings / board coming across the work before starting tile & plastering work in the building and re-fix the same after done.
Uprooting tree/plants upto 30 cm girth from wall or any part of building upto double storey buildings completly to the entire satisfaction of Engineer-in-Charge, making good the disturbed portion and filling holes in cement mortar (1:3) or PCC (1:2:4) type B-1 using 20mm graded stone aggregate to match with existing surfaces and removal of rubbish outside MOD land complete all as specified.
Supply only water proofing compound, ISI marked, complete all as specified.
One coat of white wash on old plastered ceiling surfaces, including preparation of surfaces, complete all as specified.
Three coats of white wash on new plastered ceiling surfaces, including preparation of surfaces, complete all as specified.
Two coats of white washing on old plastered wall surfaces, including preparation of surfaces, complete all as specified.
Prepration of new plasterd wall surfaces of any description complete all as specified and applying the following: - (a) Applying wall care putty, in two coats & smoothening the surfaces etc. as specified (preparatory to paint as directed). (b) Two coats of interior acrylic distemper over and including a coat of acrylic emulsion primer.
Complete removal of existing treatment from plastered wall surfces and applying the following including preparation of the surfaces to the entire satisfaction of EIC: - (a) Applying wall care putty, in two coats & smoothening the surfaces etc. as specified (preparatory to paint as directed). (b) Two coats of interior acrylic distemper over and including a coat of acrylic emulsion primer.
Prepration of new plasterd wall surfaces of any description complete all as specified and applying the following: - (a) Applying wall care putty, in two coats & smoothening the surfaces etc. as specified (preparatory to paint as directed). (b) Two coats of exterior acrylic emulsion over and including a coat of water based exterior primer.
Complete removal of existing treatment from plastered wall surfces and applying the following including preparation of the surfaces to the entire satisfaction of EIC: - (a) Applying wall care putty, in two coats & smoothening the surfaces etc. as specified (preparatory to paint as directed). (b) Two coats of exterior acrylic emulsion over and including a coat of water based exterior primer.
Plain sheet glass 4mm thick ordinary quality and glazing with oil putty or wooden beads in squares n. exc. 0.5 Sq.m in each pane complete all as specified.
Figured glass 4mm thick ordinary quality and glazing with oil putty in squares n. exc. 0.5 Sq.m in each pane complete all as specified.
Applying one coat (finishing coat) of synthetic enamel paint, preparation of old painted wood and wood based surfaces of any description not other wise described over 10cm width or girth and complete all as specified.
Two coats of synthetic enamel paint over & including a coat of pink primer over new wood and wood based surfaces of any description not other wise described over 10cm width or girth including preparation of surfaces, complete all as specified.
Applying one coat (finishing coat) of synthetic enamel paint including peparation of old painted steel & iron surfaces of any description not other wise described over 10cm width or girth, complete all as specified.
Two coats of synthetic enamel paint over & including a coat of red oxide primer over new steel or iron surfaces of any description not other wise described over 10cm width or girth including preparation of surfaces, complete all as specified.
500 litre capacity, white, three layered polyethylene water storage tanks (cylindrical vertical with threaded lid) including hoisted and fixed in position, making connections, IN-REPAIR, complete all as specified including the following acessories: - (i) Gun metal ball valves, high pressure, with metal rod & high density plastic ball complete screwed for iron pipe or brass ferrule and fixed, suitable for 20 mm bore GI pipe, IN REPAIR, complete all as specified. (iii) Gun-metal stop valve (quarter turn type) with MS lever handle, suitable for 20 mm bore GI tubes, ISI marked, screwed both ends for iron pipe, IN REPAIR, complete all as specified. (iv) Provn of 20 mm bore GI light grade tube from O/H tank to nearest mouth of RWP, IN REPAIR, complete all as specified.
Steel tubes 15 mm bore ‘medium grade’, galvanized with all fittings and fixed to walls and ceilings or laid in floors, complete all as speciifed.
Steel tubes 20 mm bore ‘medium grade’, galvanized with all fittings and fixed to walls and ceilings or laid in floors, complete all as speciifed.
Re-fixing old steel tubes 15 mm bore and connections in any position, (walls, ceilings, floors etc.) complete all as speciifed.
Angular stop valve/cock, cast copper alloy, chromium plated, with wall flange, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIRS, complete. MAKE: PRAYAG Cat No. 6510 or equivalent make mentioned in Appendix 'B'.
Concealed stop valve/cock, cast copper alloy, chromium plated, with wall flange, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIRS, complete. MAKE: PRAYAG Cat No. 6518 or equivalent make mentioned in Appndix 'B'.
Bib tap, cast copper alloy, chromium plated fancy type, long body with wall flange, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIRS, complete. MAKE: PRAYAG Cat No. 6508 or equivalent make mentioned in Appendix 'B'.
Pillar tap, cast copper alloy chromium plated, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIRS, complete. MAKE: PRAYAG Cat No. 6502 or equivalent make mentioned in Appendix 'B'.'.
Overhead ABS Rodio shower with cast copper alloy chromium plated arm 225 mm long with flange and fixed in position, IN REPAIRS, complete. MAKE: PRAYAG Cat No. BOS-103 or equivalent make mentioned in Appendix 'B'.
Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm, ISI marked, white, with integral foot rests (excluding flushing cistern and flush pipe), IN REPAIR, complete all as specified. MAKE: PRAYAG Cat No. 4055 or equivalent make mentioned in Appendix 'B'
Vitreous China wash basin, white, flat back, size 550 x 400 mm, ISI marked, including fixing acessories like rag bolts etc. with CP waste coupling half or full threaded suitable for & including 32 mm size PVC solid waste pipe, IN REPAIR, complete all as specified. MAKE: PRAYAG Cat No. 4645 or equivalent make mentioned in Appendix 'B'
PVC flushing cistern 10 litre capacity, syphonic action type, any shade, dual flush, ISI marked with flush pipe and all fixing acessories, IN REPAIR, complete. MAKE: PRAYAG Cat No. 502 or equivalent make mentioned in Appndix 'B'
Glass shelf 300 mm long and fixed to wall with chromium plated brass screws and rawl plugs, IN REPAIR, complete. MAKE: PRAYAG Cat No. BEA- 49 or equivalent make mentioned in Appndix 'B'.
Brass chromium plated towel rail 500-600 mm long, fixed to wall with SS screws and PVC rawl plugs, IN REPAIRS, complete. MAKE: PRAYAG Cat No. BA-10 or equivalent make mentioned in Appndix 'B'.
Stainless steel soap dish, IN REPAIRS complete. MAKE: PRAYAG Cat No. BA-15S or equivalent make mentioned in Appndix 'B'.
Stainless steel round slotted grating with frame, 100 mm size fixed in position with cement joints, IN REPAIR complete all as specified.
PVC connections 15 mm size of length 450 mm with PTMT nuts, IN REPAIR, complete all as specified.
Stainless steel sink (SS-204) with drainage board made out of 1.00mm thick sheet for kitchen or laboratory with plug waste pipe washers incld cantilever cast iron brackets connecting union etc overall size 940mmx460mmx203mm with bowl size 405mmx 354mm, IN REPAIRS complete all as specified. MAKE: PRAYAG Cat No.1342D or equivalent make mentioned in Appndix 'B'.
Steel plate rack made of stainless steel 0.65mm thick over all size 610 x 760 x 254 mm, IN REPAIRS complete all as specified. MAKE: PRAYAG Cat No.P-430 or equivalent make mentioned in Appndix 'B'.
uPVC pipes 75 mm external dia, type-B, ISI marked (IS:13592) single socketed in any length with rubber ring joints, fixed under floors/walls as SWR pipes, IN REPAIRS, complete all as specified.
uPVC/PVC bend any radius, suitable for uPVC soil waste discharge pipes 75 mm external dia, IN REPAIRS, complete all as specified,
uPVC/PVC vent cowl 75 mm external dia, IN REPAIR complete all as specified.
uPVC floor trap, suitable for uPVC soil waste discharge pipes 75 mm ext dia, IN REPAIRS, complete all as specified,
Cast iron soil, waste and vent pipes, spun type, 75 mm bore, ISI marked (IS:3989), in any length with or without ears, with cement joints, fixed to walls with and including mild steel clamps, IN REPAIRS, complete all as specified.
Cast iron soil, waste and vent pipes, spun type, 100 mm bore, ISI marked (IS:3989), in any length with or without ears, with cement joints, fixed to walls with and including mild steel clamps, IN REPAIRS, complete all as specified.
Cast iron bends 75 mm bore (any radius), diminishing pieces or tapers (largrer bore measured) with oval acess door, ISI marked, IN REPAIRS, complete all as specified.
Cast iron bends 100 mm bore (any radius), diminishing pieces or tapers (largrer bore measured) with oval acess door, ISI marked, IN REPAIRS, complete all as specified.
Cast iron branch pieces, 75 mm bore, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches suitable with oval access door, ISI marked, IN REPAIRS, complete all as specified.
Cast iron branch pieces, 100 mm bore, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches suitable with oval access door, ISI marked, IN REPAIRS, complete all as specified.
Cast iron cowl, suitable for 75 mm bore spun pipe, ISI marked, IN REPAIRS, complete all as specified.
Cast iron cowl, suitable for 100 mm bore spun pipe, ISI marked, IN REPAIRS, complete all as specified.
75 mm bore cast iron sanitary connections short connections pipe of length upto 450 mm, IN REPAIRS, complete all as specified.
100 mm bore cast iron sanitary connections short connections pipe of length upto 450 mm, IN REPAIRS, complete all as specified.
100 mm cast iron sanitary P or S trap fit WC out-let, IN REPAIRS, complete all as specified.
Cast iron floor trap, 75 mm bore, including jointing to waste pipe set in cement concrete type B-1(1:2:4) of size 200 mm x 200 mm x 250 mm, complete all as specified.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 Sq.m each and removing from site all as specified.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 Sq.m but not exceeding 4.00 Sq.m each and removing from site all as specified.
Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and removing from site all as specified.
Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and refixing in the same opening after easing adjusting and minor repair complete all as specified.
Taking down cement plaster of any description on brick walls or concrete surfaces etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises complete all as specified.
Taking up or down steel tubing 15 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified.
Taking up or down steel tubing 20 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified.
Demolition brickwork or stone / boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified.
Demolition of cement concrete (unreinforced) in ground floors and pavings not excceding 15cm thickness (above or below ground level) all as specified
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided all as specified.
Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified.
Demolition of mud phuska in roofs, any thickness including plaster and leeping plaster (whether full thickness removed or only part thereof) all as specified.
Dismantlig brick tiles in roof laid dry and pointed in cement mortar all as specified.
J.K & Company
M/S GURBACHAN SINGH
N S ENGINEERS
PRATHAM TRADERS
siddharthenterprises
LABH SINGH AND SONS
M/s Sahib and Company
R K ENTERPRISES
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .