Construction of Elevated Road and Corridor for Ash Pipe Line of Anpara Thermal Power at Belwadah

Supplying and stacking at site.90 mm to 45 mm size stone aggregate

Supplying and stacking at site.63 mm to 45 mm size stone aggregate

Supplying and stacking at site Moorum

Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density .

Excavation, loading, unloading, leveling and compaction etc.of ash taken from main ash dyke of anpara thermal power station to low lying areas of vill. Pipri, Duddhi-Sonebhadra as per direction of Engineer-in-charge. (Below 5.75 % as per previous LOI)

Transportation of ash taken from main ash dyke of anpara thermal power station to low lying areas of vill. Pipri, Duddhi-Sonebhadra for lead beyond 0 Km up to 1 Km for all lifts, to be completed as per direction of Engineer in Charge.(8.41/km/cum, for 1 kms 8.41*1=8.41) (Below 5.75 % as per previous LOI)

Excavation and Filling of local available earth by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) and its transportation upto a distance of 1.00 KM and lift 1.5m at main Ash Dyke Area of ATPS to ash pipe line service road including loading, unloading, dozering and compaction etc. as directed by Engineer-incharge and environmental norms..

1:4:8 (1 Cement : 4 coarse sand(zone-III) : 8 graded stone aggregate 40 mm nominal size).

Dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete.

Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) : Flush/ Ruled pointing