Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹28.1 L
Closing Date
3 Oct 2026, 4:00 pm
Bengaluru Water Supply And Sewerage Board
venupriya
Work of Construction of 15.5ML Capacity GLR and allied works at Sy No.99/1, Srinivasapura, near Kogilu, Bangalore
BWSSB/2026-27/CT/WORK_INDENT3411
BWSSB/2026-27/CT/WORK_INDENT3411
Open
Construction of new tanks
Two Tender Document System(Two Cover)
BWSSB Chief Engineer Project Bengaluru
4 documents required · 4 mandatory
The Tenderer as prime contractor should have satisfactorily completed during the last five years at least one similar work :i) completed in a single contract to an extent of 50% of the cost of the work value not less than Rs. 1403.28 lakhs (Constructed & commissioned GLR along with allied works). (If the contract contains many components all components need to be completed)
The Tenderer as prime contractor should have satisfactorily completed during the last five years at least one similar work .ii)The contractor in a single work should have constructed and commissioned 12.5 ML and above capacity, RCC water retaining Ground level reservoir with RCC roof
Executed in any one year, the following minimum quantities of work for following a. RCC of M 30 with shuttering for 3,740.90 cum b. Earth work Excavation for 21,400 Cum c. TMT steel (550 or 500D) for 380 MT d. MS pipeline commissioned of for 200 Rmt 250mm dia and above e. MS specials for 2080 Kgs. f. Bulk flow meter for 01 No. g. Supply, Installation and for 3 Nos commissioning of submersible pump set of discharge capacity 500 cum per hr and more. h. Supply and installation of for 1 No EOT crane.
Equipment details as per tender document.
Should have achieved in at least two financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs. 5613.15 lakh
Liquid assets or availability of credit facilities of not less than Rs. 421.00 Lakhs (usually the equivalent of the estimated cash flow for the three months in the peak construction period)
assessed available tender capacity
₹7,500
₹28.1 L
8 Sept 2026
8 Sept 2026
5 Oct 2026
21 Sept 2026
21 Sept 2026
Work of Construction of 15.5ML Capacity GLR and allied works at Sy No.99/1, Srinivasapura, near Kogilu, Bangalore
Clearing and grubbing land including uprooting rank vegetable grass, bushes, shrubs, saplings and trees upto 300mm girth by manual means, in areas of light jungle, removal of stumps, disposal of unser...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications,including setting out, shoring, strutting, barricading, caution lig...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications,including setting out, shoring, strutting, barricading, caution lig...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications,including setting out, shoring, strutting, barricading, caution lig...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications,including setting out, shoring, strutting, barricading, caution lig...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications,including setting out, shoring, strutting, barricading, caution lig...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications,including setting out, shoring, strutting, barricading, caution lig...
In ordinary/soft rock without blasting upto 1.5 m depth @ 10% of EW
In ordinary/soft rock without blasting Depth exceeding 1.5 m, but not exceeding 3 m @ 5% of EW
Hard Rock (without blasting/blasting prohibited) depth upto 1.5 m 5% of EWE
depth exceeding 1.5 m upto 3 m 2.5% of EWE
Excavation of Hard Rock by diamond rope cutting method using diamond rope,line draw machine,making holes by drilling machine for breaking the block by means of hydraulic breakers/splitters without any...
Disposal off the excess excavated earth of all types by vehicle including loading,unloading with all lead and lifts, labour, HOM of machineries etc.( Debris) for: 10km
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying Plum Concrete wth cement concrete 1:3:6 (having cores aggregates of 40% of 40mm, 40% of 20mm, 20% 12mm and downgraded) having maximum 70% boulders for filling / levelling and site...
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...
Supplying and laying of bi-axial extruded high module polypropylene geogrid conforming to MORT&H specification for base/sub base reinforcement having minimum tensile strength 40kN/m in the longitudina...
Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine agg...
Form work for base raft and similar such works slope portion valve chambers, staircase
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Form work for wall portion longside, shortside, central wall, depth portion, baffel wall, inlet and outlet chamber walls, valve chambers, flowmeter chambers,scour chambers
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
form work columns and colums for head room
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Form works for walls, partition walls, Roof Slabd, Column Capital & Columns (on item 14)
Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...
Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to RCC structures like floor and walls of reservoirs, sewe, effluent and water treatment plants,...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Providing and applying crystalline mortar by mixing in the ratio of 4.5 : 1 (4.5 parts integral crystalline mortar : 1 parts water) for treatment of faulty construction joints, cracks, tie rod holes, ...
Applying priming coats with primer of approved brand andmanufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate sections and other sections of approved make conforming ...
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windo...
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 m...
Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. compl...
Providing and fixing PVC water stopper of suitable type of 230 mm width and 5 mm thickness for construction joints as per detailed technical specifications and as directed by Engineer-in-charge.
Supplying and fixing PVC encapsulated CI rungs to shapes and at locations specified in drawings and specifications for Valve chambers
Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...
Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...
Providing and fixing 150mm dia. Cast Iron pipe for ventilatiing shaft 1 M high with specials and cowl and with suitable grips in CC 1:2:4 pillar using 10mm to 20mm graded hard granite, with 15 cms. th...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...
Providing 12 mm cement plaster with cement mortar 1:4 (1 cement:4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, inc...
Providing and fixing 110 mm dia - 6g/cm2 PVC rain water pipes as per IS: 4984 including all fixtures such as brackets, bends etc.as directed by the Engineer.
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...
Manufacturing, providing, trasporting, rolling, lowering, laying, jointing and commissioning of ERW (Electric Resistance Welded)/ SAW (Submerged Arc Welded) MS pipes of Outer dia (Fe-410 grade) confor...
Manufacturing, providing, trasporting, rolling, lowering, laying, jointing and commissioning of ERW (Electric Resistance Welded)/ SAW (Submerged Arc Welded) MS pipes of Outer dia (Fe-410 grade) confor...
Manufacturing, providing, trasporting, rolling, lowering, laying, jointing and commissioning of ERW (Electric Resistance Welded)/ SAW (Submerged Arc Welded) MS pipes of Outer dia (Fe-410 grade) confor...
Manufacturing, providing, trasporting, rolling, lowering, laying, jointing and commissioning of ERW (Electric Resistance Welded)/ SAW (Submerged Arc Welded) MS pipes of Outer dia (Fe-410 grade) confor...
Manufacturing, providing, trasporting, rolling, lowering, laying, jointing and commissioning of ERW (Electric Resistance Welded)/ SAW (Submerged Arc Welded) MS pipes of Outer dia (Fe-410 grade) confor...
Manufacturing, providing, transporting, rolling, lowering, laying, jointing & testing and commissioning of MS specials of minimum 8 mm thick such as bends, tail pieces, reduces etc. conforming to IS73...
Pipe bends,branches, tail pieces, reducers etc. for upto 500mm dia pipes
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS1865 and of grade GGG 40/50, shaft of stainless steel, wedge f...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS1865 and of grade GGG 40/50, shaft of stainless steel, wedge f...
Providing and fixing of Double Flanged Resilient seated short body Butterfly valves of various dis. As per IS 13095/en 593 with integral DI seat face with approved soft sealing with body and disc of D...
Supply and fixing of DI Double flanged wafer type ( Concentric) / double eccentrically disc, Resilent seated Butterfly valves confoming to BS EN 593 / IS 13095 with shaft shall be of stainless steel A...
300 mm dia. PN 16 size scour valves for GLR
Supplying and fixing kinetic AIR VALVE PN 16.0 for automatic discharge of accumulate air during working condition, conforming to IS 14845 / EN 1074-4. Body and bonnet of DI conforming to IS-1865 of gr...
Supply, delivery at site,fixing,testing and commissioing of Conductivity type Level Switch for the High Level & Low Level sensing - (2 point contact) with necessary instrumentation cabling,glands with...
Providing and fixing guage with iron sheet of 3 mm to 4 mm thickness, 0.23 Mtr. Width with copper floats indicators and flexible nylon wires, painting figures with approved enamelled paint all lead an...
Installation, Commissioning and Testing (for receipt of readings to the Bulk Flow Metering and Monitoring System SCADA Centre ) of HART output ( flow rate and Totalizer) based Electromagnetic Inductio...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Form works for walls, partition walls, Roof Slab, Column projections and slab projections
Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and moving...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat ...
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004,Alkali & fungal resistance, dirt resistance exterior paint of required ...
Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nomina...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate sections and other sections of approved make conforming ...
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming...
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...
Providing and laying of 1.5 mm thick SBS modified self adhesive single stick waterproofing membrane, with minimum elongation of 300% and puncture resistance of greater than 200 N (as per ASTM E154), w...
Design, fabrication, supply, erection, testing and commissioning EOT crane consisting of double girder box type construction, rail mounted end carraiges with long and cross travel arrangement, main an...
Mechanical Works:-Supplying at site of work erection and commission of brand new Submerged VT Pumpset with integrally mounted on Bowl with enclosed impeller confirming to the latest IS standards Pump ...
Supply and fixing of Ductile Iron double flanged swing check valves with slanted seat or with lever weight with straight disc, with metallic corrosion proof and wear resistant seal faces with nickel o...
Supply and delivery of following sizes of CI D/F Sluice Valves of BIS mark with actuator for nominal pressure, suitable for operating with CI handle and key rod etc., at site of work inclusive of taxe...
Supplying & Fixing of DI Resilient seated soft sealing sluice valve with body,bonnet of Ductile Iron of grade GGG50,Wedge fully rubber lined with EPDM & seals of NBR and the valves should be vaccum ti...
Providing, erecting and commissioning M.S. Dismantling joint as per requirement and Department's approved drawing and specifications, including machining and rubber rings and suitable for 16 kg/cm2 wo...
Providing, erecting and commissioning M.S. Dismantling joint as per requirement and Department's approved drawing and specifications, including machining and rubber rings and suitable for 16 kg/cm2 wo...
MS fabricated supports & chequered plates for pipeline,Ladder & I-girder for hoist,platforms for valve and pump operation & maintainence and other Equipments
406 mm with 8.7 mm thk on Common delivery Header
323.0 mm with 8.7 mm thk on individual delivery side of each pump
Manufacturing, providing, transnporting, rolling, lowering, laying & Jointing, testing, commissioning of Spirally/Longitudinal welded MS pipes (Fe-410 grade) conforming to IS 3589-2001 including perfe...
323.0 mm with 8.7 mm thk for scour valve pipeline
Manufacturing, providing, trasporting, rolling, lowering, laying, jointing & testing and commissioning of MS specials of minimum 8mm thick such as bends, tail pieces, reduces etc. conforming to IS-732...
300 mm PN 16 on Common header for Scour Valve
100 mm PN 16 on Common header for Kinetic Air relief valve isolation arrangement
100 mm PN 16 on Pumping main for Air release valve arrangement
Supply,Installation and commissioning of Chain Pulley Block with Trolley arrangement as per IS 3938 of 2 Ton Capacity with a height/lift of 10 m for lifting and lowering of Pumps from GLR and lowering...
Air Conditioning and Ventilation of Switch gear Room and ICA Room & Tools and testing Instruments. Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC ...
Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with...
Supplying ......TR split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 V with hermetically sealed compressor with air cooled condenser, motor capacitor and start run cap...
Supplying of MS Bolts, nuts and Washers for all the Flange joints for all above listed locations
Supplying of Champion gaskets (Rubber Insertions) for all the Flange joints for all above listed locations (3 Ply RI Sheet)
Providing and fixing of DI Double flanged wafer type (Concentric) /double eccentrically disc, Resilent seated Butterfly valves confoming to BS EN 593 / IS 13095 with shaft shall be of stainless steel ...
Supply and delivery of electrically operated actuator suitable for fixing on the existing butter fly valves at the pumping with required mechanical adaptor arrangements and mounting accessories etc., ...
Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...
Installation, Commissioning and Testing (for receipt of readings to the Bulk Flow Metering and Monitoring System SCADA Centre ) of HART output ( flow rate and Totalizer) based Electromagnetic Inductio...
Providing and laying in position cement concrete of design mix M30 with 20mm nominal size graded crushed coarse aggregates for all Foundation works. The granite/trap/basalt crushed graded coarse aggre...
Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...
Electrical Works:- 11kV Spun Pole with 3 GoS Sysrtem: HT Electrical Works - Bescom Portion 11kV Spun Pole with 3 GoS Sysrtem: Supply and Erection of Hallow Tubular Pole with Gang Operated Switch for r...
Prefabricated Platform for erection of 250 kVA Transformer on 11 Mtr Spun Pole Structure involving Rectangular hollow Sections 96x48x4.87 Thk and 66x3x4.5 Thk, Circular hollow section of 165.6 OD x 10...
HT Metering cubicle as per BESCOM standards:
11kV HT Metering Panel 3 CT 3 PT for 3 Phase 4 Wire Metering With Transparent Cover TTB, with 30x8mm Cu Bus bars (HT Metering Box Fabricated out of 3mm MS ...
11 kV 3C X 95 sq.mm UG, AL. Arm. Cable in outdoor with necessary Hume Pipe/GI Pipe for road crossing. (From 11kV pole to Metering Cubicle) SUPPLY
11 kV, 3 Core XLPE HT UG Cable (Round Armoured)
SupplySupply and providing Heat Shrinkable outdoor termination kit suitable for 11 kV, 3C X 95 sq.mm XLPE UG Al. Arm. Cable.
(At 11kV spun pole)
Indoor termination kit supply
Earthing for HT metering cubicle: rod type earthing
Supply11kV Load Break Switch Panel:
Supply & Erection of 11kV Load break switch panel (Load Break Switch, HRC Fuse, Fuse Trip Mechanism, and Earth Switch) of 630 A rating with incoming from HT Meterin...
Erection testing and commissioning
Supply11kV / 0.433kV, 250kVA Transformer
Distribution Transformer - 3 Phase, 11kV/433V - Stacked CRGO Core with Oil as per IS-1180 (Part-1): 2014
B. CABLE ENTRY TYPE
119 12.18 250 kVA, Aluminium Wdg,...
Erection of 200 - 250 kVA Transformer
11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975 meter cubicle to 11kV LBS panel and f...
Supply and providing Heat Shrinkable Indoor termination kit suitable for 11 kV, 3C X 95 sq.mm XLPE UG Al. Arm. Cable.
i) At Metering Cubicle - 1 no.
ii) At 11kV LBS Panel - 3 nos.
iii) At Transforme...
Erection Fixing of Termination Kit
Pipe Earthing: Supplying fixing and wiring earth electrode for grounding of transformers, DG Sets etc. using 40 mm dia 2.9mm thick 2.5 meter long GI pipe with GI funnel with mesh and suitable size red...
Supply, Manufacturing, Installation, Testing and Commissioning of Outdoor 415V, 3 Ph, 4 wire, 50 Hz LT KISOK (IP-65) Cubicle type with gland plates for bottom entry for incoming and outgoin...
CT Ratio - 400/5A, 0.5 Accuracy Class
Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT network with ...
Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator wh...
3x240 Sqmm Heat shrinkable outdoor type cable termination kit for XLPE cable
Main LT Panel/Power Control Centre (PCC):
Supply, Installation, Testing ad Commissioning of Main LT Panel/ Power Control Centre(PCC) of cubicle type with 415V, 50 Hz, 3 PH, TPN, 25 kA for 1 sec, wtih ...
CT Ratio - 400/5A, 0.5 Accuracy Class (Bus Copuler)
Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT network with ...
iii) Resin Cast Sensing CTs for APFC Panel of ratio 400/5A, 1 Core, CL-0.5 Accuracy,
iv) LED Indication Lamps for RYB Indication with 6A SP MCB for Protection of each lamp
v) LED Indication Lamps for ON/OFF/Trip indications
Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator wh...
OUTGOING FEEDERS BUS BAR 1& 2:-Outgoing to 250A MCCB for 65 kW Starter Panel-1,2,3&4 Feeder: with rotatory handle and necessary indication for OPEN & CLOSE a) 250A TP MCCB, Adjustable, Confirms to IS/...
Spare feeder : 250A TP MCCB Breaking Capacity 36/35 KA
Outgoing to 16A MPCB for 0.55 kW Knife Gate Valve: With rotatory handle and necessary indication for OPEN & CLOSE
Rotary handle for MCCB
Outgoing to 125A TP MCCB: To APFC-1 & 2
Supplying and fixing regular MCCB distribution Panel confirming to IS/IEC 61439 - 3 and IK09 tested as per IS/IEC 62262 with minimum IP43 protection provided with Polyurethane (PUR) gasket, with suita...
Independent Floor mounted Star Delta Starter Panel:
Supply & erection of Independent Floor mounted Starter Panel-1 to 4 for 65 kW motor with 415V, 50 Hz, 3 PH, TP, 25 kA for 1 sec, wtih min IP-54 encl...
APFC Panel: Supply & erection of 30 kVAR Automatic Power Factor Correction Panel with rated Voltage 415V AC, 3ph, 50Hz, Delta Connection, Super Heavy Duty Square Cap Capacitor with Detuned Reactor (Al...
Power Distribution Board: 4 Way / 8 way / 12 Way Vertical TPMCB sheet steel distribution boards Flush type/Surface type fitted with Bus bars and Neutral links with single / three phase MCB outgoings a...
Indoor Lighting DB: Supply of 7 Segment 4 Way TPN DB with IP 42 Protection with provision for FPMCB / Isolator / RCCB / RCBO as incomer, 3 Nos DPMCB / Isolator / RCCB / RCBO as sub incomer and 2 Nos o...
Plug & Sockets: 63 A, Three Phase Plug & Socket in Sheet steel enclosure of Surface mounting type in the Pumping station with 63 Amps, 30 mA, Four Pole RCCB (Feeder derived from LT PCC) (Preferred Mak...
Street Lighting DB: Outdoor, IP 55, Metal Door Pole/Wall mounted, suitable for Street Lighting with One (1) No. of TPN, 32 A MCB for incoming and three (3) nos. of TP 10 MCB along with contactor for o...
Battery Charger :110 V, 15 A float and 30 A boost (with float and boost battery charger as per technical specification).
HMI:- SCADA communication equipment
Supply and laying of LT Power Cables of 1100 Voltage grade, stranded Aluminium/Copper conductor, XLPE insulated, inner and outer extruded PVC sheathed, galvanized steel wire/ strip ARMORED Power cable...
11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975 300 Sqmm, (58 GI Wires - 3.15 mm Dia)...
3C x 95 sq.mm (Al. Conductor) 95 Sqmm, (54 GI Wires - 2.5 mm Dia) (PCC to APFC-1 & 2)
1100 V XLPE insulated armoured cable (copper) Flexible multicore cable 4C x 6 sq.mm (Cu. Conductor) (PCC to Street Lighting)
4C x 4sq.mm (Cu. Conductor) (PCC to Indoor LDB. 32A Receptacle, Fan DB)
3 core flat PVC sheathed submersible pump cable, 3C x 4 sq.mm (PCC to Dewatering pumps, AC)
3C x 2.5 sq.mm (Motorised Valves & motors upto 2.2 kW rating)
2Cx4 sq.mm (1-ph sockets, 1-ph Exhaust Fans & other 1-Phase loads)
1Cx2.5 sq.mm (for Protective Earth for 1-phase loads)
Cable gland suitable for 3 and half core 300 sq.mm UGcable Trf. Secondary to LT kiosk LT kisok to Main LT Panel/PCC
Cable gland suitable for 3 and half core 35 sq.mm UG cable (LT PCC to Starter Panel-1 to 4 Starter Panel-1 to 4 to 65 kW motor JB)
4C x 6 sq.mm (Cu. Conductor) (PCC to Street Lighting)
4C x 4sq.mm (Cu. Conductor) (PCC to Indoor LDB. 63A Receptacle, Fan DB)
3C x 4 sq.mm (Cu. Conductor) (PCC to Dewatering pumps, AC)
3C x 2.5 sq.mm (Cu. Conductor) (Motorised Valves & motors upto 2.2 kW rating)
2Cx4 sq.mm (1-ph sockets, 1-ph Exhaust Fans & other 1-Phase loads)
300 sq.mm (Al. Conductor) Trf. Secondary to LT kiosk LT kisok to Main LT Panel/PCC
35 sq.mm (Al. Conductor) (LT PCC to Starter Panel-1 to 3 Starter Panel-1 to 3 to 55 kW motor JB)
3C x 35 sq.mm (Al. Conductor) (PCC to APFC-1 & 2)
4C x 6 sq.mm (Cu. Conductor) (PCC to Street Lighting)
4C x 4sq.mm (Cu. Conductor) (PCC to Indoor LDB. 32A Receptacle, Fan DB)
3C x 4 sq.mm (Cu. Conductor) (PCC to Dewatering pumps)
Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...
Laying of cable
HDPE Pipe Inserts Supplying and laying of HDPE Pipes:- HDPE pipe grade PE100-PN10.0, 160 mm 1) Outdoor transformer yard to Indoor LT PCC 2) LT PCC outgoing cables
Nylon Cable Ties 100 nos
20A DP+E + 25A DP RCCB (Industrial Type)
Lighting system:- Supplying of.....feet-PVC Batten with integrated LED tube....W with high quality diffuse r with Life of 25000 burning hours& 70% lumenmaintenancewithCRI greater than 80.PowerInput:22...
Supply and transportation of LED Driver as per IS 15885 (Part 2 / Sec 13)..2012 with input line voltage 120V-270V AC, 50Hz with surge protection of 4.0 KV, IP20, suitable for 15-30W, LED street light ...
Street Lighting: Supply and transportation of 150W LED Street light Luminaire made of pressure diecast alluminium body with powder coated, having protective toughned glass, Supply Input voltage 120 - ...
Supply and transportation of LED Driver as per IS 15885 (Part 2 / Sec 13) 2012 with input line voltage 120V-270V AC, 50Hz with surge protection of 4.0 KV, IP20, suitable for 90-180W, LED street light ...
Fabrication, Transportation and supply of hot-dip galvanized Octogonal Pole with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangement, including the ...
Foundation and erection charges with special T&P, for 7.50 Mtrs long Octagonal /Conical pole duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of 0.45Mtr x 0.4...
Fabrication, Transportation and supply of 1.0 Mtr Length Single Arm Bracket made with MS galvanized 40mm / 50mm dia Pipe. Makes:Bajaj / Valmont / TRANSRAIL / SKIPPER / LAASMA
Supply of Sintex SMC Pole mounted junction box or cut-out box or fusebox for road or street lighting for three phase or Four core cables and high wattage HPSV or HPMV or MH based lighting system for i...
Supplying heavy-gauge PVC conduit pipe...dia...mm thick conforming to IS2509 with suitable-sized bends, junction boxes, adhesive paste, etc., and fixing using inverted wood plugs in case of RCC ceilin...
Two outlet in a row, above 3 Mtr upto 6 Mtr from tapping point to outlet via switches.Points
Medium point above 3 m up to 6 m from tapping point to outlet via switch box. Points
Long point above 6 m, up to 10 m from tapping point to outlet via switch box.Point
Supplying and fixing a superior quality modular switch mounting polycarbonate plate with the necessary supporting backplate with the required number of machine screws, bolts, nuts, etc., complete on t...
Supplying and drawing 3-core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor conforming to 13:8130-1984 and virg...
Wiring for lighting/power circuit using one of FRLSPVC insulated 1100 V grade, multistrand copper wire with low conductor resistance, single core in open or concealed system of wiring with specified I...
Earthing system:- Rod type earthing system using 40 mm dia using 3 m long MS rod in earth pit of 300 mm width and 3300 mm depth using 50 X T mm flat welded to ground rod as terminal and connected to e...
Main LT panel, Soft Starter, Main Motors
Fan DB, Wall mounted DBs, Lighting DBs
For all other motors
Transformer grounding
Earthing for Street Lighting: Rod type of earthing using 40mm dia, 3 mtr long MS rod as ground rod, in earth pit of 300mm width and 3300mm depth and using 50x6mm flat welded to ground rod as terminal ...
50 x 10 mm GI (PCC Panels, Starter Panels, Main Motors, Main earth grid etc.)
25 x 6 mm GI (Cable Trays, Fan DB LDBs, street Lighting etc.)
8 SWG GS Wire - Junction Boxes, Fractional HP motor, DG Body
Lightning Protection system:- Supply of Air Terminal with corrosion resistant stainless chrome body made up of AISI 316 grade of height 0.50 metres capable of working in hazardous atmosphere, non-radi...
Supply of Standard / Speciat Mounting structure of height 4.5 mts. pipe, and 300 x 300 x Bmm MS plate, 3 mts. 48mm OD class C GI outer Pipe, 1.8 mtr,38mm OD inner PiPe, for roof mounting on concrete b...
Supply and run of 25mm x 6mm with necessary clamps / supports for earth connection GI Flat Down Condutor on wall / floor / ground.
Supply of Test Link Box for each Down comer to disconnect the earth termination measurement of resistance conductor in order system to enable
Installation and commissioning of advanced lighting protection systems which includes 1. Laying of CC Bed 2. Installation of Lighting Rod 3. Laying of Down conductor 4. Installation of Counter 5. Inst...
Supply and insallation maintenance free Gl Earthiing System comprising of 50mm dia and 2 mtr. long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs. of carbon based environme...
Providing all he necessary safety equipment as per CERC guidelines, like gloves fire extinguisers, earth mat, etc along with the furnitures and computer (with latest Windows vrsion),
Construction of platform with size stone, cement concert for erection of Transformer/Metering cubicle/Heavy Equipment. Construction of platform with size stone, cement concrete for erection of Meterin...
Transformer Per structure
11kV Load Break Panel Per structure
LT Kiosk Per structure
Roads and drains: - Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers wi...
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...
Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ra...
Plain Cement Pavement Quality M30 grade Concrete (RMC) with OPC & GGBS laid without Paver Construction of un-reinforced plain cement concrete pavement using RMC M-30 grade with OPC @ 270 kg/m3 and GGB...
Crack Groove Cutting: Groove shall be cut using hand held electrically operated concrete cutting machine of size of 50 mm wide and 75 mm deep on each side of the crack to form as "V" groove all along ...
Crack Sealing/Filling using epoxy mortar: Base and hardener of the high strength repair mortar . Epoxy putty shall be mixed using the slow speed heavy duty mixing machine to obtain a uniform mix. The ...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...
Disposal off the excess excavated earth of all types by vehicle including loading,unloading with all lead and lifts, labour, HOM of machineries etc.( Debris) for: 10km
Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, inc...
Providing and laying 100mm thick side wall & bottom slab of 600mm width for drain with opening using M20 concrete reinforced with Micro Alloyed High carbon steel with 3mm - 3ply wired steel @ 150mm sp...
Providing and laying 100mm thick pre-cast cover slabs over Road side drains / utility ducts / Rain water harvesting pit of width not exceeding 1000 mm using M20 concrete reinforced with TMT bars Fe 55...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Srinivasapura bid.doc
Tender Document • 1.60 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .