Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.3 LAdmitted-Finance A 86 MANISH MARG NEMI NAGAR VAISHALI NAGAR JAIPUR JAIPUR JAIPUR RAJASTHAN 302021 | JAIPUR | RAJASTHAN | 302021 | L1 | Admitted-Finance | |
| 2 | L2₹27.5 L+₹4.2 L (18.3%)Admitted-Finance 27 DEV VIHAR DHANI KUMAWATAN SANGAINER JAIPUR RAJASTHAN 302011 | JAIPUR | JAIPUR | RAJASTHAN | 302011 | L2 | Admitted-Finance |
| Sl No | Description | Qty | Unit | M/S GURU CONSTRUCTION COMPANY L2 | LIFE STYLE INTERIORS L1 |
|---|---|---|---|---|---|
| 1.00 | DELUXE MODEL Technical Specification For Mobile Racks: Manually operated & mechanically assisted Mobile Racks sliding smoothly & effortlessly on a pair of rails & providing maximum storage capacity by compaction. THE UNDERCARRIAGE: BASE FRAME: Channel type Base Frame fabricated in one part, Each Wheel Is provided with TWO Support Channel, Made from 2.5 mm thick M.S. Sheet size of Channel 25mm x 100mm x 40mm TRACKS: The guide rails shall be made out of 28mm Bright Bar placed on 0.8mm thick M.S. Plate with 6 Bends placed above the floor and are as per the international standard of safety. No's of Tracks as per Drawing. SUPER STRUCTURE: Super structure of the Mobile storage system will consist of Knock Down Type Panels (Not Slotted Angle Type). All the components such as shelves, front panel, end panel, vertical rear panel, central partition etc. will act as an integral member of the unit. SHELVES: Adjustable Shelves made of 0.8 MM thick Prime Quality C.R.C.A. sheet having 10 folds, each design to carry a U.D.L. of 60 kgs. Per Level VERTICAL PANEL: Vertical Panel made out of 0.8 MM thick C.R.C.A. Prime Quality Mild Steel having 8 Folds (36X15X12MM) & designed carry full load of entire unit with Overlapping Provisions for Dust Resistant. MIDDLE PANEL: Made out of 0.8 MM thick C.R.C.A Prime Quality Steel having 16 Folds (36X15X12MM) & designed to carry full load of entire unit TOP PANEL: Made out of 0.8 mm thick C.R.C.A Prime Quality Steel having 8 Folds, (27MM X 12MM) with Overlapping provision for Dust Resistant. CENTRE PARTITION: The centre partition will comprise of full C.R.C.A. Prime Quality Mild Steel 0.8 mm Sheet END PANEL: Made out of 0.8 mm thick C.R.C.A Prime Quality Steel having 8 Folds (72 X 15 X 12). CENTRAL LOCKING: System will be provided with individual rack locking as well as Centralized locking Arrangement on the last unit when all units are brought together. Central lock when operated gets locked with the floor & does not allow access to the unit. POWDER COATING: Nine Tank Process Powder Coated, Structure Finishing 50 to 60 Microns. INDEX ARRANGEMENT: Acrylic card holders (2 Nos.) provided on the front panel for easy identification & retrieval. SHAFT: 20 mm thick Full Length. PEDESTAL BEARING: Entire mechanism on Pedestal Bearing, Each wheel provided with 2 Bearing Pedestal for Smooth movement) as per International Standard). Wheel: Made by Casting Material OD 125mm & Thickness 36mm.Chain: 0.5" Chain. ROpen able Shutter: Made by 1 mm sheet with Shifter with high security sing kev lock with up and down and site locking agreement with in-built handle. | 2 | Per Set | 11,80,000 ₹23,60,000 | 9,58,857.9 ₹19,17,715.8 Lowest |
| 2.00Description of Goods Installation Body Item Per Bay Qty Qty Total DFMU 5 BAY BODY IN DFMU 6.00 7.00 42.00 SFMU 5 BAY BODY IN SFMU 3.00 1.00 3.00 SFFU 5 BAY BODY IN SFFU 3.00 1.00 3.00 Total Body 48.00 | |||||
| 3.00 | Providing & Fixing of DOUBLE FACE MOVABLE UNIT (DFMU) (QTY 7 Nos) 2200 (HT) X 900 (W)X 762 (D) MM 5 Compartments
SINGLE FACE MOVABLE UNIT (SFMU) (QTY 1 No) 2200 (HT) X 900 (W)X 450 (D) MM 5 Compartments SINGLE FACE FIX UNIT (SFFU) (QTY 1 No) 2200 (HT) X 900 (W)X 406 (D) MM 5 Compartments
2 TRACK 0.8 MM THICKNESS SUPERSTRUCTURE
2.5 MM TROLLY POWDER COATED (Rate are inlcuding all taxes) | 1 | Per Set | 3,90,000 ₹3,90,000 Lowest | 4,07,456.7 ₹4,07,456.7 |
| 4.00COMPACTOR TECHNICAL SPECIFICATION DELUXE MODEL Technical Specification For Mobile Racks: Manually operated & mechanically assisted Mobile Racks sliding smoothly & effortlessly on a pair of rails & providing maximum storage capacity by compaction. THE UNDERCARRIAGE: BASE FRAME: Channel type Base Frame fabricated in one part, Each Wheel Is provided with TWO Support Channel, Made from 2.5 mm thick M.S. Sheet size of Channel 25mm x 100mm x 40mm TRACKS: The guide rails shall be made out of 28mm Bright Bar placed on 0.8mm thick M.S. Plate with 6 Bends placed above the floor and are as per the international standard of safety. No's of Tracks as per Drawing. SUPER STRUCTURE: Super structure of the Mobile storage system will consist of Knock Down Type Panels (Not Slotted Angle Type). All the components such as shelves, front panel, end panel, vertical rear panel, central partition etc. will act as an integral member of the unit. SHELVES: Adjustable Shelves made of 0.8 MM thick Prime Quality C.R.C.A. sheet having 10 folds, each design to carry a U.D.L. of 60 kgs. Per Level VERTICAL PANEL: Vertical Panel made out of 0.8 MM thick C.R.C.A. Prime Quality Mild Steel having 8 Folds (36X15X12MM) & designed carry full load of entire unit with Overlapping Provisions for Dust Resistant. MIDDLE PANEL: Made out of 0.8 MM thick C.R.C.A Prime Quality Steel having 16 Folds (36X15X12MM) & designed to carry full load of entire unit TOP PANEL: Made out of 0.8 mm thick C.R.C.A Prime Quality Steel having 8 Folds, (27MM X 12MM) with Overlapping provision for Dust Resistant. CENTRE PARTITION: The centre partition will comprise of full C.R.C.A. Prime Quality Mild Steel 0.8 mm Sheet END PANEL: Made out of 0.8 mm thick C.R.C.A Prime Quality Steel having 8 Folds (72 X 15 X 12). CENTRAL LOCKING: System will be provided with individual rack locking as well as Centralized locking Arrangement on the last unit when all units are brought together. Central lock when operated gets locked with the floor & does not allow access to the unit. POWDER COATING: Nine Tank Process Powder Coated, Structure Finishing 50 to 60 Microns. INDEX ARRANGEMENT: Acrylic card holders (2 Nos.) provided on the front panel for easy identification & retrieval. SHAFT: 20 mm thick Full Length. PEDESTAL BEARING: Entire mechanism on Pedestal Bearing, Each wheel provided with 2 Bearing Pedestal for Smooth movement) as per International Standard). Wheel: Made by Casting Material OD 125mm & Thickness 36mm.Chain: 0.5" Chain. ROpen able Shutter: Made by 1 mm sheet with Shifter with high security sing kev lock with up and down and site locking agreement with in-built handle. | |||||
| 5.00Description of Goods Installation Body Item Per Bay Qty Qty Total DFMU 5 BAY BODY IN DFMU 2.00 7.00 14.00 SFMU 5 BAY BODY IN SFMU 1.00 1.00 1.00 SFFU 5 BAY BODY IN SFFU 1.00 1.00 1.00 Total Body 16.00 | |||||
Tender Value
₹28.3 L
EMD Value
₹56,600
Closing Date
24 Nov 2025, 6:00 pmClosed
EXECUTIVE ENGINEER HQ
JAIPUR NAGAR NIGAM PANDIT DEENDAYAL UPPADHYAY BHAWAN LALKOTHI TONK ROAD JAIPUR
WORK OF INSTALLING MECHANICAL MOBILE COMPACTOR/FILE OPTIMIZER IN MUNICIPAL CORPORATION JAIPUR HEADQUARTERS BUILDING
2025_DLB_513584_1
89 EXECUTIVE ENGINEER HQ
Open Tender
Miscellaneous Works
Item Rate
120 days
JAIPUR
As Per Bid Documents
3 documents required · 3 mandatory
₹500
ONLINE PAY IN JAIPURMC WEBSITE
₹56,600
Yes
26 Nov 2025
15 Nov 2025
25 Nov 2025
15 Nov 2025
24 Nov 2025
15 Nov 2025
Amount
DELUXE MODEL Technical Specification For Mobile Racks: Manually operated & mechanically assisted Mobile Racks sliding smoothly & effortlessly on a pair of rails & providing maximum storage capacity by compaction. THE UNDERCARRIAGE: BASE FRAME: Channel type Base Frame fabricated in one part, Each Wheel Is provided with TWO Support Channel, Made from 2.5 mm thick M.S. Sheet size of Channel 25mm x 100mm x 40mm TRACKS: The guide rails shall be made out of 28mm Bright Bar placed on 0.8mm thick M.S. Plate with 6 Bends placed above the floor and are as per the international standard of safety. No's of Tracks as per Drawing. SUPER STRUCTURE: Super structure of the Mobile storage system will consist of Knock Down Type Panels (Not Slotted Angle Type). All the components such as shelves, front panel, end panel, vertical rear panel, central partition etc. will act as an integral member of the unit. SHELVES: Adjustable Shelves made of 0.8 MM thick Prime Quality C.R.C.A. sheet having 10 folds, each design to carry a U.D.L. of 60 kgs. Per Level VERTICAL PANEL: Vertical Panel made out of 0.8 MM thick C.R.C.A. Prime Quality Mild Steel having 8 Folds (36X15X12MM) & designed carry full load of entire unit with Overlapping Provisions for Dust Resistant. MIDDLE PANEL: Made out of 0.8 MM thick C.R.C.A Prime Quality Steel having 16 Folds (36X15X12MM) & designed to carry full load of entire unit TOP PANEL: Made out of 0.8 mm thick C.R.C.A Prime Quality Steel having 8 Folds, (27MM X 12MM) with Overlapping provision for Dust Resistant. CENTRE PARTITION: The centre partition will comprise of full C.R.C.A. Prime Quality Mild Steel 0.8 mm Sheet END PANEL: Made out of 0.8 mm thick C.R.C.A Prime Quality Steel having 8 Folds (72 X 15 X 12). CENTRAL LOCKING: System will be provided with individual rack locking as well as Centralized locking Arrangement on the last unit when all units are brought together. Central lock when operated gets locked with the floor & does not allow access to the unit. POWDER COATING: Nine Tank Process Powder Coated, Structure Finishing 50 to 60 Microns. INDEX ARRANGEMENT: Acrylic card holders (2 Nos.) provided on the front panel for easy identification & retrieval. SHAFT: 20 mm thick Full Length. PEDESTAL BEARING: Entire mechanism on Pedestal Bearing, Each wheel provided with 2 Bearing Pedestal for Smooth movement) as per International Standard). Wheel: Made by Casting Material OD 125mm & Thickness 36mm.Chain: 0.5" Chain. ROpen able Shutter: Made by 1 mm sheet with Shifter with high security sing kev lock with up and down and site locking agreement with in-built handle.
Description of Goods Installation Body Item Per Bay Qty Qty Total DFMU 5 BAY BODY IN DFMU 6.00 7.00 42.00 SFMU 5 BAY BODY IN SFMU 3.00 1.00 3.00 SFFU 5 BAY BODY IN SFFU 3.00 1.00 3.00 Total Body 48.00
Providing & Fixing of DOUBLE FACE MOVABLE UNIT (DFMU) (QTY 7 Nos) 2200 (HT) X 900 (W)X 762 (D) MM 5 Compartments SINGLE FACE MOVABLE UNIT (SFMU) (QTY 1 No) 2200 (HT) X 900 (W)X 450 (D) MM 5 Compartments SINGLE FACE FIX UNIT (SFFU) (QTY 1 No) 2200 (HT) X 900 (W)X 406 (D) MM 5 Compartments 2 TRACK 0.8 MM THICKNESS SUPERSTRUCTURE 2.5 MM TROLLY POWDER COATED (Rate are inlcuding all taxes)
COMPACTOR TECHNICAL SPECIFICATION DELUXE MODEL Technical Specification For Mobile Racks: Manually operated & mechanically assisted Mobile Racks sliding smoothly & effortlessly on a pair of rails & providing maximum storage capacity by compaction. THE UNDERCARRIAGE: BASE FRAME: Channel type Base Frame fabricated in one part, Each Wheel Is provided with TWO Support Channel, Made from 2.5 mm thick M.S. Sheet size of Channel 25mm x 100mm x 40mm TRACKS: The guide rails shall be made out of 28mm Bright Bar placed on 0.8mm thick M.S. Plate with 6 Bends placed above the floor and are as per the international standard of safety. No's of Tracks as per Drawing. SUPER STRUCTURE: Super structure of the Mobile storage system will consist of Knock Down Type Panels (Not Slotted Angle Type). All the components such as shelves, front panel, end panel, vertical rear panel, central partition etc. will act as an integral member of the unit. SHELVES: Adjustable Shelves made of 0.8 MM thick Prime Quality C.R.C.A. sheet having 10 folds, each design to carry a U.D.L. of 60 kgs. Per Level VERTICAL PANEL: Vertical Panel made out of 0.8 MM thick C.R.C.A. Prime Quality Mild Steel having 8 Folds (36X15X12MM) & designed carry full load of entire unit with Overlapping Provisions for Dust Resistant. MIDDLE PANEL: Made out of 0.8 MM thick C.R.C.A Prime Quality Steel having 16 Folds (36X15X12MM) & designed to carry full load of entire unit TOP PANEL: Made out of 0.8 mm thick C.R.C.A Prime Quality Steel having 8 Folds, (27MM X 12MM) with Overlapping provision for Dust Resistant. CENTRE PARTITION: The centre partition will comprise of full C.R.C.A. Prime Quality Mild Steel 0.8 mm Sheet END PANEL: Made out of 0.8 mm thick C.R.C.A Prime Quality Steel having 8 Folds (72 X 15 X 12). CENTRAL LOCKING: System will be provided with individual rack locking as well as Centralized locking Arrangement on the last unit when all units are brought together. Central lock when operated gets locked with the floor & does not allow access to the unit. POWDER COATING: Nine Tank Process Powder Coated, Structure Finishing 50 to 60 Microns. INDEX ARRANGEMENT: Acrylic card holders (2 Nos.) provided on the front panel for easy identification & retrieval. SHAFT: 20 mm thick Full Length. PEDESTAL BEARING: Entire mechanism on Pedestal Bearing, Each wheel provided with 2 Bearing Pedestal for Smooth movement) as per International Standard). Wheel: Made by Casting Material OD 125mm & Thickness 36mm.Chain: 0.5" Chain. ROpen able Shutter: Made by 1 mm sheet with Shifter with high security sing kev lock with up and down and site locking agreement with in-built handle.
Description of Goods Installation Body Item Per Bay Qty Qty Total DFMU 5 BAY BODY IN DFMU 2.00 7.00 14.00 SFMU 5 BAY BODY IN SFMU 1.00 1.00 1.00 SFFU 5 BAY BODY IN SFFU 1.00 1.00 1.00 Total Body 16.00
M/S GURU CONSTRUCTION COMPANY (BID ID -3375488)
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.74 MB
EPROC89XENHQ.pdf
Tender Documents • 5.47 MB
BOQ_915993.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .