SPECAIL REPAIR TO ROOF TRUSS,FALSE CEILING AND KOTA STONE IN BLDG NO T 21 T 22 T 23 OR SINGLE LIVING AT 405 LT AD REGT SP AT BABINA CANTT

Amount

Dismantling of Asbestos cement ( corrugated, semicorrugated, etc.) sheets in roof coverings.

S & F Pre- painted galvalume aluminum zink coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering/cladeding to wall, fixed with self tapping screw as specified

S & F Pre- painted galvalume aluminum zink coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering/cladeding to wall, fixed with self tapping screw as specified

Dismantling timber scantling 40sq. Cm and over in section , in any position.

S & F Roof trusses Fe 410-W (Gde-E-250) quality-A (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing ( Beam, Tee, angles, channel or flat sections) including distance pieces, ceats etc.

Preparation of new surfaces of steel of any description, over 10cm in width or girth, and applying two coat of synthetic enamel paint over one coat of red oxide not otherwise described as specified and directed.

Dismantling of wall and ceiling boards (fibere, pulp, insulation boards/slabs/blankets, any thickness. Including cover fillets

S & F aluminium anodised snap grid of size 605mm x 605mm size to support the boars, tiles with aluminium tee section 35mm x 25mm x 1.40mm, cross tee 23.50mm x 23.50mm x 1.40mm and aluminium angle 25mm x 25mm x 1.40mm as on edge/sides including proper hanging arrangement with 4mm dia nodized galvnised iron wire and adjuster incouding 4mm tick Everest Non Asbestos fiber cement designer board (E-Board classic) size 60cm x 60cm fixed on ceiling on staples of snap grid and including making good the distrubed wall portion with CM 1:3 or with PCC, 1:2:4 type B1 ( using 20mm graded stone aggregates ) as required coplete all as secified and directed.

Taking down chowkats or frame with shutter (without taking off shutters from the frame) exe 1.5 sqm n.exe 4 sqm each.

Taking down chowkats or frame with shutter (without taking off shutters from the frame) n. exe 1.5 sqm each.

S&F powder coated aluminium window fabricated out of aluminium section 1.60mm thick (double shutter double leaf ) side hung type with stainless steel but hinge, one shutter glazed with and including 4mm thick 5mm thick sheet glass tinted and other shutter with stainless steel wire cloth 0.36 mm dia of wire and average width of aperture 1.40 mm fixed with stainless steel wire stapples rubber gasket, stopper, powder coated aluminium grills of aperture size of grill 50mmx 50 mm, (All fitting powder coated) ,aluminium anodised handle 100mm long, aluminium anodised tower bolts 100mm long and peg stay etc complete and size of aluminium frame 125mm x 40mm x 1.55mm and shutter frame size 40mm x30mm x 1.55mm complete all as specified and as directed

S & F Frame work Fe290(GdeE-165) as in doors or gates of angles or other section with gusset plates , rails, braces, etc,. Complet drilling for fixing of steel sheeting or other covering doors etc.

S&F Flush shutters 35mm thick , solid core construction, with block board core and plywood face panels, commercial type on both sides.

S&F 35mm thick 2nd class hardwood glazed an skeleton shutters, open rebated and prepared to received glass, guage etc (without sash bars), edges of frame, plain chamfered or rounded, fitted with cut and mitered beads, for securing glass/guaze etc size of member of shutter as specified in SSR Part-I, Section 8, clause No 8.24(a) complete all as specified and directed.

S&F MS butt hinges medium weight cold rolled 100mm size all as specified and directed

Supply and fix Aluminium tower bolt 150mm long, stove enameled black with bright bolts complete all as specified and directed.

Supply and fix Aluminium handle, oval type, 150 mm long, stove enameled black complete all as specified and directed.

Supply and fix 300 mm long aluminum alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy all as specified and dir

S&F mild steel, 300 mm ordinary rat tail door spring including roller and roller plate etc complete.

S&F MS holdfasts of FI 25x3 confirming to Fe 290 Gde-E-165 complete all as specifed and directed.

M & L cement concrete for holdfast type B-1 1:2:4( using 20mm graded stone aggregate)

S&F Galvanised mild steel cloth 0.56 mm nominal dia if wire and average width of apparture 118mm and fixed with tined tacks or galvanized wire staples complete all as specified and directed.

M&L for preparing new surfaces of wood or wood based materials not otrherwise described over 10cm width or girth and applyong two coats of synthetic enamel paint over a coat of pink primer.

Roughening surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust, etc.

M&L for machine cut kota stone slab flooring 20-25 mm thick over 15mm thick cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, over and including 15mm thick screed bed or bedding layer in cementy mortar 1:4, over 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) etc complete.

M&L for machine cut kota stone slab 20-25 mm thick, in riser of steps, skirting, dado and pillar laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete,incl 10mm thick rendering on wall or conc surfaces in cement mortar 1:4 ,complete all as specified and as directed.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone including cutting and polishing types over 15 mm thick in CM(1:6) etc complete.

Demolition of brick work built in cement mortar

M & L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cm (1:6), rise of hight for brick wall.

M & L Rendering 15mm thick in CM( 1:6) on fair faces of brick or concrete surfaces finished fair and even without using extra cement.

M & L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper (oil emulsion), over a coat of alkali resistant primer on walls complete.

M & L for preparation of new plastered or unplastered surfaces of walls including cornices, pilasters etc and applying two coats cement based paint complete.

Demolition of cement concrete in ground flor and pavings nexc 15cm thickness ( below or above ground level)

M&L for 75 mm thick PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate ) as in plinth protection/path over 75mm thick Sub base in PCC 1:5:10 type E-2 (using 40 mm graded stone aggregate ) and finishing surfaces even and smooth without using extra cement including making joint at interval not exc 3 mtr and filling joint with hot mixed bitumen with sand in the proportion 1 : 1 .

M&L 80 mm thick machine pressed precast concrete interlocking paver block any shape & size With grey cement and pigment confirming to IS 15658-2006 of 80 mm thickness, M-40 grade with grey cement & pigment.

Taking down cement plaster on brick or stone walls, etc.including raking out joints hacking for key, scrubbing down with water, etc all as directed.

Complete removal of existing treatment on wall using one coat of primer and white putty two coat of OBD on wall surfaces.

Complete removal of existing treatment on wall using one coat of primer and white putty two coat of cement base paint on wall surfaces.

Taking down carefully aluminium/copper point wiring on batten or in PVC conduit or in MS conduit with GI earth wire etc (for light, fan, socket or power) complete,including fixture and fitting such as switches,ceiling roses,pendents,regulators,sockets,light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions seperately) and making good the disturbed surfaces of walls, Floors, ceilings etc.

Taking down carefully existing wooden board , Main switch, MCB DB boxes with MCBs, sheet metal boxes, cut out, etc of any size any capacity from boards complete all as specified and as directed.

Taking down carefully sub main wiring / service connection twin core from wall / LT pole of any size of Aluminum with wooden batten and or through rigid conduit including GI wire and making good the disturbed surfaces of walls, roofs, floors etc complete all as specified and as directed.

M & L for concealed point wiring complete with PVC insulated and unsheathed flame retardant low smoke ( FRLS ) cable of 1.5 sqmm (nominal area) with stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 19 mm dia, clip, with MS terminal boxes (not less than 1.0 mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including common earth dolly with 3 mm thick plastic laminated sheet top cover of approved make and colour including 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete including cutting necessary chases on wall / ceiling surfaces for drawing of conduit & cables as required and making good disturbed surfaces of walls with CM 1:3:6 and matching with the existing surfaces including colour washing all as specified and as directed for :- (a) One light point controlled by one switch

(b) one fan point controlled by one switch & regulator.

(c) One 3/5 pin 5 Amp socket outlet point controlled by one switch on independent board.

(d) One 3/5 pin 5 Amp socket outlet point controlled by one switch on same board.

Description all as per item No 42 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed flame retardant low smoke( FRLS ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed.

S&F switch piano flush button type 5 Amp single pole one way complete all as specified and as directed.

S&F socket outlet 2in1, 3 pin, 5 Amp flush type complete all as specified and as directed.

S&F switch piano flush button type 15 Amp single pole one way complete all as specified and as directed.

S&F socket outlet 2in1, 3 pin, 5 Amp and 15 Amp flush type complete all as specified and as directed.

S & F Lamp holder,PVC/Urea type with back plate suitable for batten fittings complete all as specified as directed

S & F 10W LED ball lamp B-22, 3000K holder base with polycorbonate body and aluminium heat sink complete all as specified as directed. Make Havels Cat part No-LHLDEBHEUEMD8X010 B22 ball lamp or equivalent of C&S/Bajaj

S&F ceiling rose,surface bakelite 63 x50mm three terminals complete all as specified and as directed.

S & F Regid non-metallic PVC conduit not less than 19 dia (external) ISI marked (on surface) incl of all accessories and all fittings such as Tees,bends, elbows, reducers, bell mouth, tube ends and fixing accossories such as couplers,lock nuts, saddles, pipe hook etc complete all as specified and as directed

S&F sheet metal enclosure double door suitable for distribution boards when MCBs to be used having 100Amp rated bus bar SPN, 8 ways 240 V complete all as specified and as directed.

S&F MCB single pole and neutral 40 Amp 240 V ,10KA , 'C' series, complete all as specified and as directed with copper lugs

S&F MCB single pole 6 to 32Amps 240 V,10KA, 'B' series,complete all as specified and as directed with copper lugs

S&F in Repair 20 W 830 LED ENDURA LINEAR NEO surface and wall mounted LED lighting fixture Size in mm (LXWXH) 1200x108x62 mm with extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver and 20W LED lamp fitted incl wiring upto and terminating into existing ceiling rose complete all as specified and as directed. Make:- Havells Cat Part No LHEWEBP5 IN 1W020(ENDURA LINEAR NEO) or equivalent in Philips /GE

Supply and fix LED street light 15 W,5700K complete with braket and all accessories Make:- Havells Cat Pt No:LHETBXU71A65015 or equivalent in Bajaj

S&F 1100 Volts grade heavy duty cable PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape & overall PVC sheathed in service connection suspended by insulating hanger not more than 1 meter apart including 4 mm GI suspension wire one twin core cable flat or circular of size 16 Sq mm to be connected to existing MCB box / Main switches complete all as specified as dircted.

Supply only LED Lamp 9/10 W. Make:Havells/Philips

M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick weithing not less than 17.5 Kg buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT 1, 2010 with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switches, DBs) complete all as specified & testing on completion. NOTE:- (I) item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate.

M/s Ravi Traders

MS RAJ KUMAR SINGH

Ms Vinay constructions

G.R.associates