SPECIAL REPAIR TO BLDG NO P 49 AND P 41 AT AF STN JAIPUR

Amount

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for keys, scrubbing down with water, etc complete all as specified and directed.

Demolition of cement concrete is ground floors and pavings n. exc. 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of RCC work as Roofs, floors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work including removal of debrises from site and cleaning the primises etc complete all as specified and directed.

M&L for fixing 5cm thick Sand stone slabs in sunshades, chajjas, shelves, cills, landings, cover stones, templates, etc, n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4, complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:6 on stone masonry surfaces and making surface even and smooth with out using extra cement complete all as specified and directed.

Hacking out old broken glass (any thicknesss, size,quality or description) from metal frame inlcuding punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

Dismantling floor, hearth or wall tiling of any description including cement mortar bedding (but not backing) and rubbish off the premises including removal of debrises all as specified and as directed by Engineer-In-Charge.

M&L 15 mm thick cement mortar 1 : 6 screed bed or bedding layer for laying floor finishes etc complete all as specified and directed.

M&L for Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L Glazed ceramic tiles in vertical surfaces 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick screed bed in CM 1:4 etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S & F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

Taking down Chowkatts or frames exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames) etc complete all as specified and directed.

Taking down Chowkatts or frames n.exc 1.5 sq. m each with shutters (without taking off shutters from the frames) etc complete all as specified and directed.

Taking down Shutters of any descriptoin exc 1 Sqm but not exc 2 Sqm and refixing the same openning after repairing including replacing broken hinges (if any) etc complete all as specified and directed.

Taking down shutters of any desription exc 1 sqm but n. exc. 2 sqm each etc complete all as specified and directed.

Taking down shutters of any desription of size n. exc 1 sqm each etc complete all as specified and directed.

M&L for 30 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats complete all as specified and directed.

S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repairs steel windows and ventilators double shutters one for gauzeing (Wiremesh) and one for glazing with side hung shutters including projecting / box / friction type hinges with as required steel handles and steel peg stays complete with gauzing and glazing bars including guard bars in between gauzing and glazing shutters dovetailed or weldwed etc drawing and design as specified and aproved by Engg -in-Charge.

Anodised aluminium powder coated frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

Anodised aluminium powder coated window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

Supply and fixing 5mm thick tinted sheet glass and glazing, fixed in aluminium frame n exc 0.5 sq.m in each pane complete all as specified and directed.

M&L for 30mm thick Flush shutters solid core construction with block board cor and ply wood faced panels commercial type on both side etc complete all as specified and directed.

M&L for 35mm thick plain framed paneled shutter(single or double shutter) with 2nd class HW rail and style (two panels) with lock rail and panel of 9mm thick BWP commercial ply wood the size of rail and stile as per IS-1003 (Part-I) complete all as specified and directed.

S&F Solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel heaving a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Paneling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing etc complete all as specified and directed.

S&F 100 mm butt hinges medium weight stainless steel ISI marked complete all as specified and directed.

S&F 150 mm long Aluminium handles cast type anodised etc complete all as specified and directed.

S&F 200 mm Alumunium anodised barrel tower bolt of extruded section fixed etc complete all as specified and directed.

S & F in repairs Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor (140mm size) complete all as specified and directed

S & F Harrison rails, anodised aluminium alloy with fixing brackets, stops, rollers etc complete all as specified and directed.

M&L IInd CL HW Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours; articles n. exc. 200 Cucm each incl 50mm long butt hinges med Wt cold rolled mild steel complete all as specified and directed.

S&F 3mm thick ordinary quality sheet glass glazing with u-pin and oil putty n.exc .5 sqm each pane in square/ rectangle shape and size cutting and fixxing etccomplete all as specified and directed.

All as per item no-36 but figured glass, pin headed type etc complete all as specified and directed.

S & F for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apparture 1.4mm and fixed with stainless steel wire staple etc complete all as specified and directed.

S&F Framed work such as grill gratings etc. with end of bars shouldered and or riveted or forged into spikes framed guard bar , barred iron doors railings frame work of water tank and similar work conforming to Fe 290. Gde -E-165 including hanging arrangement as gate ,with hooks and pintle hinges stops hand-made sliding bolt welding, fixing in wall etc complete all as specified and directed.

S&F in repairs 15mm Tubes, 'Md grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and directed.

S&F in repairs 20mm Tubes, 'Md grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and directed.

S&F fixed Cast iron soil, waste and vent spun pipes 100mm , in any length with or without ears with cement joints, laid in trenches or in floors etc complete all as specified and directed.

S&F fixed Cast iron soil, waste and vent spun pipes 75mm , in any length with or without ears with cement joints, laid in trenches or in floors

S&F fixed in repair cast iron soil, waste and vent spun pipes 100 mm bore in any length with or without ears with cement joints fixed to walls etc complete all as specified and directed.

S&F fixed in repair cast iron soil, waste and vent spun pipes 75 mm bore in any length with or without ears with cement joints fixed to walls etc complete all as specified and directed.

S&F in repairs spun cast iron soil 100mm bore bends etc complete all as specified and directed.

S&F in repairs spun cast iron soil 75mm bore bends etc complete all as specified and directed.

S&F PVC (SWR) floor trap of 75 mm dia outlet plain with grating including jointing with solvent cement etc complete all as specified and directed.

S&F stack clams out of 50mm by 5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof for 100mm dia pipe etc all as specified and directed complete.

M&L for complete removal of existing treatment from ceiling and applying three coat of white wash on undecorated surface complete all as specified and directed.

M&L for Complete Removal of existing treatment from wall or similar surfaces applying two coats of cement based paint on walls in different patterns shade including preparation of old decorative surfaces etc all as specified and as directed by Engr-in-Charge.

M&L preparation of new/previously untreated wooden surface and applying two coats of synthetic enameled paint over a coat of pink primer on wooden surfaces of any description, over 10cm width or girth etc complete all as specified and directed.

M&L preparation of new/previously untreated steel surface and applying two coats of synthetic enameled paint over a primming coat of red oxide etc

M&L for preparation of new plastered surfaces and applying two coats distempering on walls with distemper oil emulsion, white or tinted over a coat of chalk whitining on plastered sufaces etc complete all as specified and directed.

M&L for applying two coats of cement based paint on walls in different patterns including preparation of new surfaces all as specified and as directed by Engr-in-Charge.

M & L for welding works in repairs exc 2.5cm but n.exc 5cm in length and thickness of metal to be welded exc 9mm but n.exc 20mm etc including cleaning and preparing of surfaces to be welded together holding the member in true position while welding and bevelling of edges as required etc.all as specified and directed by Engg-in-Charge.

S&F in repair vitreous china wash hand basin size 450x300mm white flat back including cutting for and pinning in ends of brackets or erecting stand including waste coupling etc complete all as specified and directed.

S & F in repair Vitreous China squatting pan, `Orrisa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including P trap 100 mm, including connection to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor etc complete all as specified and directed.

M&L low level flushing cistern 10 Ltr capacity white complete with inlet ball valve float , syphon assembly, handle including brackets etc complete all as specified and directed.

S&F in repairs 500 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I etc complete all as specified and directed.

M&L 20mm Ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed etc complete all as specified and directed.

S&F PVC connection pipe 15mm size with PTMT nuts of length 450mm etc complete all as specified and directed.

S&F in repairs 15mm bib taps fancy type cast copper alloy c p with crutch of butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed etc complete all as specified and directed.

S & F Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed

S&F in repairs 15mm Stop valves fancy type cromium plated with long shank and cup (consealed Type) screwed both ends for iron pipe and fixed etc complete all as specified and directed.

S&F brass chromium plated Tubular towel rail, 20 mm dia, D type, 60cm long between flanges etc complete all as specified and directed.

S & F Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union etc complete all as specified and directed.

S&F Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern complete all as specified and directed.

S&F in repairs 20mm Gun metal globe or Gate valves with iron wheel head screwed both ends for iron pipe concealed and fixed etc complete all as specified and directed.

S&F in grating 100 mm dia of PTMT (Min Wt 25 gms) etc complete all as specified and directed.

M&L upto 6m height from ground including necessary suttering and form work for applying 10mm thick bonding coat of modified styrene butadiene emulsion (SBR bonding agent i.e. Nitobond SBR 45) in proportion 1 (Nitobond SBR 45) : 1(water) : 3 (OPC) by volume with the brushes etc after replacing rusted TMT bars with expanded metal of suitable size to bind new cement plaster/ polymer modified plaster/ concrete/ screed concrete with old surface including removal of loose / disintegrated old concrete / plaster surface preparation etc and applying RCC (1:1.5:3) OR15 mm thick plaster with polymer modified mortar fortified with SBR (Nitobond SBR 45 ) in proportion 1:3 by weight 5 litres Nit bond SBR 45 to added to 50 KG Cement with 13 litre water. Surface to be finished with 10mm thick plaster CM (1:3) to match with the existing surface of ceiling, beams, and alike etc complete all as specified and directed.

M&L 50 mm PCC 1:3:6 type C-1, using 20mm graded stone aggregate as in padding, finished slope of 1:40 for making bond with RCC slab etc complete all as specified and directed.

M&L making V groove at the junction of roof and wall applying 10mm thick bonding coat of modified styrene butadiene emulsion (SBR bonding agent i.e. Nitobond SBR 45) in proportion 1 (Nitobond SBR 45) : 1(water) : 3 (OPC) by volume with the brushes etc after replacing rusted TMT bars with expanded metal of suitable size to bind new cement plaster/ polymer modified plaster/ concrete/ screed concrete with old surface including removal of loose / disintegrated old concrete / plaster surface preparation etc and applying RCC (1:1.5:3) OR 15 mm thick plaster with polymer modified mortar fortified with SBR (Nitobond SBR 45 ) in proportion 1:3 by weight 5 litres Nit bond SBR 45 to added to 50 KG Cement with 13 litre water. Surface to be finished with 10mm thick plaster CM (1:3) to match with the existing surface of lintels, chajjas and alike etc complete all as specified and directed.

M&L Screed bed or bedding layer of mortar 15 mm thick on roof using WPC for WPT etc complete all as specified and directed.

Supply only of integral waterproofing compound etc complete all as specified and directed.

M&L for APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. Not less than 150 gms/sqm) land over bitumen primed surfaces by Torch application inluding complete removal of existing roof treatment etc complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) etc complete all as specified and directed.

Material & labour for in replacement concealed point wiring by using 1.5 Sqmm PVC insulated unsheathed copper conductor multistrand drawn in new terminal sunken box and PVC rigid non metallic conduit medium density ISI marked fixed with all fittings and all accessories i.e 3 mm thick plastic laminated sheet for mounting of switches and socket complete for one light/fan point controlled by one switch including provn of 1.5 sqmm PVC insulated copper conductor continus as earth wire connected to earth dolly complete all as specified and directed by Engr-in-Charge (Switches, sockets etc shall be measured and paid seperately .)

All as per item Ser No. 2 above but for one 5 Amp socket outlet independent board etc complete all as specified and directed.

All as per item Ser No. 2 above but for one 5 Amp socket outlet on the same board etc complete all as specified and directed.

All as per item Ser No. 2 above but for two way switch 5 Amp etc complete all as specified and directed.

All as per item Ser No. 2 above but for one 15 Amp socket outlet independent with 2 run of cable of size 2.5 sq mm and one run of 1.5 sq mm cable as earth continuity etc complete all as specified and directed.

S & F in replacement Switch Socket combination 6 Pin 15 Amp 230 Volts etc complete all as specified and directed.

S/F in replacement bell push 5 Amps, single pole, one way 240 volts etc complete all as specified and directed.

Supply and fixing in replacement switch piano flush type single pole one way 5 Amp 240 volts etc complete all as specified and directed.

Supply and fixing in replacement switch piano flush type single pole two way 5 Amp 240 volts etc complete all as specified and directed.

S & F in replacement switch Socket combination 5 Pin 5 Amp 230 Volts etc complete all as specified and directed.

S&F for in replacement concealed wiring for circuit/sub main wiring alongwith earth wire with the following 2x4 sq.mm + 1x2.5 sqmm of sizes of FRLS cable with PVC insulated copper conductor, single core cable in surface/ recessed as required in PVC Conduit etc complete all as specified and directed. Note :- Two run of cable with one run of earth wire along with PVC shall be measure as one unit.

S/F in replacement ceiling fan regulator elecronic step type including connection etc complete all as specified and directed.

S&F in replacement ceiling rose surface Bakelite 65 x 50 mm 3 terminals etc complete all as specified and directed.

S&F Lamp holder, PVC/Polycarbonate type with LED Bulb 9 Watt back plate suitable for batten fittings etc complete all as specified and directed.

S&Fin repair for LED tube light fitting T 8 of 18 watt capacity 230 V prewired for connection etc complete all as specified and directed.

S/F LED light fitting 1x9 Watt bulk head luminaries complete with all accessories and includung connecting up with twin core twisted flexible copper conductor cable with suitable size of 230 V ,50 Hz etc complete all as specified and directed. Make- Cat part no. LHKL01160099 of Havells or equivalent in Syska/crompton.

S/F LED mirror light fitting 1x9 Watt luminaries complete with all accessories and includung connecting up with twin core twisted flexible copper conductor cable with suitable size of 230 V ,50 Hz etc complete all as specified and directed. Make-Cat part no. LUMILINEBS9W LED 830 SPCWH of Havells or equivalent in Syska/crompton

S/F in replacement bell ding dong includung connecting up with twin core twisted flexible copper conductor cable with suitable size of 230 V ,50 Hz etc complete all as specified and directed.

Dismantling of electrical Geyser of 25 Ltrs capacity servicing including geyser rod, connection pipe and rexing same with nut bolt and washer etc complete all as specified and directed.

Dismantling and taking down Electric distribution board inclluding MCBs and Isolators of any type or size and close space by brick work plastering matching with existing colour complete all as directed .

S&F sheet metal enclusure for DBs double door when MCBs to be used single pole and neutral 8 way with 200 Amps rated bus bar, 240 volts etc complete all as specified and directed.

Supply and Fixing MCB SPN, 240V,6-32 Amps etc complete all as specified and directed.

Supply and Fixing MCB SP, 240V, 6-32 Amps etc complete all as specified and directed.

Dismantling of ceiling fan get it servicing like oiling greasing painting and rexing same with nut bolt and washer hook etc complete all as specified and directed.

Ravi Enterprises

Satish kumar and company

rathore construction co.