UP-GRADATION OF PREMISES OF DIVISIONAL OFFICE INCLUDING TOILET BLOCK WSMP SOURA, INCLUDING ESTABLISHMENT OF SUB DIVISIONAL OFFICE. (UNDER UT CAPEX)

Amount

Dismantling steel work in single sections including dismembering and stacking within 50 meters lead in i. Channels, angles, tees and flats

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil

Providing and laying of dry stone soling in foundation/trenches hand packed and consolidated by hand ramming. (Subject to actual quantities during execution).

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: i. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: i. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : i. 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Centering and shuttering including strutting, propping etc. and removal of form work for: i. Foundations, footings, bases for columns

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. i. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level i. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and fixing of ornamental grills in panels of size 2.5m x 1.0m including making connection with RCC columns. The job includes one coat of steel primer and 2 coats of steel paint of approved brand and manufacture as per the directions of Engineer-in-Charge. The job includes carriage of all materials upto site of work. Complete.

Providing and laying of burj tile work of size 150x50x8mm for columns of fencing including all carriages upto site of work complete job.

Providing and fixing of lighting system on RCC work including laying of 25mm PVC conduit, 2.5mm wire, 5Amp switch, MCB 16Amp, Pannel board of size (1’-6” x 1’-6”) etc. as per site requirement including all carriages upto site of work complete job.

Supply and Filling of trenches by GSB / Nallah Muck from approved source including all carriages upto actual site of work. The material shall be natural having durable particles graded from fine to coarse in a uniform combination with no boulders larger than 80mm in size. It shall not contain excessive quantity of loam. The item including ramming, consolidation in layers, charges of T&P, equipment’s etc. required for completion of job.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. i. Hot finished welded type tubes

Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing precoated galvanised steel sheet roofing accessories0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : i. Flashings/ Aprons.(Upto 600 mm).

ii. Barge board (Upto 300 mm).

iii. Ridges plain (500 - 600mm).

12mm Cement plaster of mix: i. 1 : 4 ( 1 cement : 4 fine sand

15mm Cement plaster on the rough side of single or half brick wall of mix: i. 1 : 4 ( 1 cement : 4 fine sand)

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge. i. Pre-laminated particle board with decorative lamination on both sides.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): i. Second class kail wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). i. Second kail wood (30mm thick)

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. i. Second Class kail wood

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. i. 100 mm

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : i. 100x10 mm

ii. 150x10 mm

Providing and fixing aluminum pull bolt lock anodized ISI marked (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws bolt nuts and washers etc. complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. i. Two or more coats on new work.

Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm.

Applying priming coat: i. With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with oil type wood preservative of approved brand and manufacture on New work (two or more coats).

Pointing on stone work with cement mortar 1 : 3 (1 cement : 3 fine sand) i. Raised and cut pointing

Kota stone slab 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm ( average) thick cement mortar 1:3 (1 cement:3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing, polishing and curing complete.

Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. i. Marble Work

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. i. 15 mm nominal dia

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : i. White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps.

Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.

Flexible PVC waste pipe for sink and wash basin 32mm dia with length not less than 700 mm including PVC waste fittings

Providing and fixing 600x120x5mm glass shelf with edges round off supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete.

Providing and fixing un-plasticized PVC connection pipe with brass unions a. 45 cm length i. 15 mm nominal bore

Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931.

Providing and fixing of Mirror of superior make glass 60x45 cm

Providing & fixing of Instant Gyser ISI Mark 10Ltr. Capacity including Bolting with Wall, All accessories/fittings with electric fittings complete Job.

Providing 38cm or 15” Manual Cylindrical Lawn Mover 380mm Grass Cutting Machine with 20L Catcjer Box for Maintaining Garden Yard Farm upto 200Sqm.

Providing BX-35 Brush Cutter, 35cc Petrol Engine 4 Stroke, Side Pack Crop Cutter Machine with Heavy Duty 80 teeth, 3 teeth and Tap & go Blades, Used in Agriculture fields, Forests and wood land management of standard quality ISI marked.

Providing and fixing of following items, complete. i. PVC Flush Tank (10Ltrs capacity)

ii. C.P Soap case

iii. C.P Health faucet

iv. 15mm dia GI Tee

v. 15mm dia GI Hexa Nipple

vi. 40mm dia PVC Pipe

vii. 40mm dia PVC Bend

viii. 25mm dia PPR Pipe outer dia

Carriage of material by Mechanical Transport including loading, unloading and stacking from Division Store to dumping site. i. Cement and Steel for an avg. lead of 15Kms.

ii. Sand and aggregate for an avg. lead of 25Kms.

iii. Aggregate for an avg. lead of 25Kms

iv. Bricks for an avg. lead of 50Kms

v. Soling for an avg. lead of 15Kms.

M/S SALMAN ABID NAQSHBANDI

M/S MEHRAJ UDIN SHAH