GE 861 EWS-63/2024-25

Amount

Dismantling of wall and ceiling boards (fiber, pulp, insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed by Engineer-in-Charge.

Dismantling timber fillets in framed work , rails, posts, rafters, purlins, etc under 40 sqcm in section complete all as specified and directed by Engineer-in-Charge.

Dismantling timber scantling 40 sqcm and over in section in any position in framed work complete all as specified and directed by Engineer-in-Charge.

M&L 2nd class hard wood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails of sectional area exc 13sqcm & n.exc 25 Sqcm complete all as specified and directed by Engineer-in-Charge.

M&L for second class hard wood (clean sawn) in scantlings in frame work complete all as specified and directed by Engineer-in-Charge.

M&L for 2nd class hard wood plain fillets, square , rectangular or triangular in section, clean sawn, secured with nails of sectional area exc 6sqcm & n.exc 13 Sqcm complete all as specified and directed by Engineer-in-Charge.

S&F 6mm thick Veneered decorative plywood, grade 1(with BWR resin) with decorative face veneers on one faces; fixed with screws to timber frame work complete all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store/credit to contractor and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) complete all as specified and directed by Engineer-in-Charge.

M&L for 75mm thick cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection laid to slope of 1:12 and finishing cement concrete surface even and smooth without using extra cement with and including all necessary form work to divide the area in panels finishing exposed edges fair or rounding or chamfering of exposed edges where directed and providing 6 mm thick joints through the thickness of plinth protection duly filled with mastic filling of one part of hot bitumen 85/25 grade and three parts of fine sand (all by weight) complete all as specified and directed by Engineer-in-Charge.

M&L for Non-Skid ceramic coloured tiles 6-7mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including provision of screed bed 15mm thick in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge.

M&L for glazed ceramic coloured tiles in vertical surfaces 450mmx300mmx7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including backing coat of 10mm thick cement mortar in 1:4 complete all as specified and directed by Engineer-in-Charge.

Roughening of existing surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. complete all as specified and directed by Engineer-in-Charge.

M&L for green marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like over and including 15mm cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match complete all as specified and directed by Engineer-in-Charge.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and pointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge.

M&L for machine cut kota stone slab flooring 20-25mm thick laid over and including 10mm thick cement screed in cement mortar 1:4 in riser of steps, skirting, dado and jointed with grey cement to match complete all as specified and directed by Engineer-in-Charge.

Rounding to edges of stone slabs, such as in steps, cooking platform, and other similar situation complete all as specified and directed by Engineer-in-Charge.

S&F in repairs stainless steel sink, made out of 1.00 mm thick SS sheet for kitchen with plug, waste pipe, coupling, cast iron cantilever brackets, connecting union overall size 495x420mm bowl size 410mm x 330mm x160mm complete all as specified and directed by Engineer-in-Charge. Make: Nirali/Diamond/Blue King/Kingston

Taking up or down 15mm bore steel water tubing & connections, including cleaning for refixing or offering credit as per schedule of credit complete all as specified and directed by Engineer-in-Charge.

All as per item No 19 herein before but 20mm bore complete all as specified and directed by Engineer-in-Charge.

S&F 15mm bore medium grade galvanised steel water tubing with all fittings & fixed complete to walls or ceiling or laid in floors complete all as specified and directed by Engineer-in-Charge.

S&F 20mm bore medium grade galvanised steel water tubing with all fittings & fixed complete to walls or ceiling or laid in floors complete all as specified and directed by Engineer-in-Charge.

Refixing 15mm bore old steel water tubing & connection in new or old position of wall, ceiling, floor etc complete all as specified and directed by Engineer-in-Charge.

All as per item No 23 herein before but 20mm bore complete all as specified and directed by Engineer-in-Charge.

S&F vitreous china squatting pan "Orissa Pattern" size 580x440mm white with integral foot rest (excluding flushing cistern) but including flush pipe and trap complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 10 litre capacity PVC valveless , syphonic action type flushing cistern, low level, white, with inlet ball valve, float and handle including brackets and 32mm dia flush pipe of polyethylene of low or high density for low level cistern complete all as specified and directed by Engineer-in-Charge.

S&F Vitreous China wash basin, angle back, size 450x300mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets and waste pipe complete all as specified and directed by Engineer-in-Charge.

S&F PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 15mm fancy type bib tap, chromium plated with crutch or butterfly handle, screwed down , screwed for iron pipe or for brass ferrule complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 15mm dia Angle valve chromium plated, fancy type , screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and directed by Engineer-in-Charge.

S&F Pillar taps 15mm bore cast copper alloy, with capstan head chromium plated screwed down high pressure with or without lettered “Hot or cold” complete all as specified and directed by Engineer-in-Charge.

S&F in repairs CP Towel Rail 600mm long fixed with and including chromium plated brass screws and wooded/plastic cleats (minimum weight 190 gms) complete all as specified and directed by Engineer-in-Charge.

S&F in repairs grating doom 100 mm dia of PTMT (Minimum weight 25 gms) complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhats or frames with shutter (without taking off shutters from the frames) not exc 1.5 sqm each and removing from site complete all as specified and directed by Engineer-in-Charge.

All as per item No 34 above but exc 1.5 sqm and n.exc 4 sqm complete all as specified and directed by Engineer-in-Charge.

Taking down shutters of any description exc 1 sqm and n.exc 2sqm complete and removing from site complete all as specified and directed by Engineer-in-Charge.

M&L for pressed steel frames of size 125mmx60mm made of 1.25mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, complete all as specified and directed by Engineer-in-Charge. Note : PCC for filling of hollow portion shall be measured and paid for separately.

M&L for pressed steel frames of size 105mmx60mm made of 1.25mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, complete all as specified and directed by Engineer-in-Charge. Note : PCC for filling of hollow portion shall be measured and paid for separately.

M&L for PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in anchoring hold fast, parapets, coping, apex plates, bed plates and the like including weathering slightly rounded or chamfered angles and throating etc. complete all as specified and directed.

M&L for PCC 1:3:6 nominal mix, type C-0 using 12.5mm graded crushed stone aggregate as in filling of pressed steel door frames/chowkhats, complete all as specified and directed by Engineer-in-Charge.

Refixing of shutters of any description in same opening exc 1 Sqm and n.exc 2 sqm complete all as specified and directed by Engineer-in-Charge.

S&F 35mm thick factory made 2nd class hard wood (Sal/ Hollock) plain, framed, panelled shutters (two panels) with lock rail and panels of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial face veneers on both sides. The size of rail and style as per IS–1003 (Part-I), kiln seasoned and chemically pressure treated, fitted to chowkhats, complete all as specified and directed by Engineer-in-Charge.

S&f 2nd class hard wood 35 mm thick glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. (with or without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc, size of members of shutters as specified in SSR Part-1, Section 8, clause 8.24 (a) complete all as specified and directed by Engineer-in-Charge.

M&L for preparing new surface of wood of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-Charge.

S&F steel window with side hung shutters including projecting type hinges with steel handle, steel peg stay complete with glazing bar dovetailed/welded complete all as specified and directed by Engineer-in-Charge.

All as per item No 45 above but without glazing bars complete all as specified and directed by Engineer-in-Charge.

S&F steel ventilators with top hung shutters including hinges, steel handle, steel peg stay complete with glazing bar dovetailed/ welded complete all as specified and directed by Engineer-in-Charge.

M&L for mild steel framed work such as grills or grating and gate etc with ends ofr bars shouldered as framed guard bars conforming to Fe-410-0 or 310-0 complete all as specified and directed by Engineer-in-Charge.

M&L for painting to steel surfaces of any description over 10 cm width or girth including preparation of new or untreated surfaces and applying with two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.

S&F solid PVC door frames of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MSD square tube etc complete all as specified and directed by Engineer-in-Charge.

S&F factory made solid PVC moulded door shutter, 30 mm thick 2mm thick 3D wood grain Moulded PVC sheet polyurethane painted on the front face & 2mm plain colour PVC sheet on back face complete all as specified and directed by Engineer-in-Charge.

M&L for 18/19mm thick Pre-laminated board exterior grade, pre-laminated one side with decorative choice lamination & other side balancing white lamination, fixed with screw to timber frame any description complete all as specified and directed by Engineer-in-Charge.

Extra over rates of block board or veneered particle board for external teak wood 18/19mm lipping 6mm thick fixed with nails complete all as specified and directed by Engineer-in-Charge.

S&F 150mm hasp and staple, mild steel, wire type stove enamelled black, including bolt to hinge plate and fixed with screw complete all as specified and directed by Engineer-in-Charge.

S&F Mild steel butt hinges medium weight, cold rolled, 100mm, ISI marked complete all as specified and directed by Engineer-in-Charge.

S&F for Butt hinges 75 mm long, heavy weight, cold rolled mild steel, and fixed complete all as specified and directed by Engineer-in-Charge.

M&L for barrel tower bolts stove enamelled black of size 200 mm complete all as specified and directed by Engineer-in-Charge.

S&F in repairs aluminium, anodised, handles 125 mm of extruded section complete all as specified and directed by Engineer-in-Charge.

S&F 150mm long (D type) aluminium anodised handles or extruded section (ISI marked) complete all as specified and directed by Engineer-in-Charge.

S&F in repairs aluminium, anodised, barrel tower bolts 150 mm of extruded section complete all as specified and directed by Engineer-in-Charge.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple, (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast-aluminium alloy (ISI marked) complete all as specified and directed by Engineer-in-Charge.

S&F in repairs aluminium alloy, anodised, sliding door bolt 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed by Engineer-in-Charge.

S&F Mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engineer-in-Charge.

S&F sheet glass ordinary quality 3mm thick and glazing with oil putty or fixed with wooden beads in squares n.exc. 0.50 sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden or steel frames glazed with putty or fixed with beads n.exc. 0.50 sqm in each pane complete all as specified and directed by Engineer-in-Charge.

S&F sheet glass ordinary quality 3mm thick and glazing with oil putty or fixed with wooden beads in squares n.exc. 0.50 sqm in each pane complete all as specified and directed by Engineer-in-Charge.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and width of aperture 1.18mm & fixed with tinned tacks or galvanised wire staples complete all as specified and directed by Engineer-in-Charge.

S&F in repairs galvanised mild steel wire cloth 0.56mm nominal dia of wire and width of aperture 1.18mm & fixed with tinned tacks or galvanised wire staples complete all as specified and directed by Engineer-in-Charge.

Demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and directed by Engineer-in-Charge.

M&L for brick work with sub-class ‘B’ bricks (old size), straight or curved on plan exc. 6m in mean radius, built in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster on brick or stone walls or concrete surface etc including raking out joints, hacking for key scrubbing down with water complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 15mm thick on fare faces of brick work or concrete surface in cement mortar 1:6 surface finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 5mm thick on concrete surfaces in cement mortar 1:3 on ceiling, finished even and smooth including GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists etc. in walls, ceiling , stanchions, beams etc including all laps, cutting and waste complete all as specified and directed by Engineer-in-Charge.

M&L 15mm thick cement plastering on brick work or concrete surfaces in cement mortar (1:4) finishing surfaces even and smooth without using extra cement with WPC including taking down existing cement plaster of any description, raking out joints hacking for key , scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge. Note: WPC shall measured and paid separately

Supply only Water Proofing Compound complete all as specified and directed by Engineer-in-Charge.

M&L for preparing newly plastered surfaces of wall and applying two coats of oil bound distemper over one coat primer on walls over thin layer of wall putty complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of newly plastered surfaces and applying two coats of white wash on ceiling all as specified and directed.

M&L preparation of newly plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed by Engineer-in-Charge.

M&L for complete removal of existing treatment and applying 3mm thick of Birla wall care putty and applying two coats of oil bound distemper white or tinted over a coat of primer on walls, etc complete all as specified and directed by Engineer-in-Charge.

M&L for complete removal of existing treatment and applying two coat of white wash on ceiling complete all as specified and directed by Engineer-in-Charge.

M&L for complete removal of existing treatment and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old surfaces of wood of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

All as per item no. 81 above but on steel surface complete all as specified and directed by Engineer-in-Charge.

S&F stainless steel Curtain/drapery rod 20 mm dia as approved colour/design in one length with clamps, ring, ball shaped knobs at both ends complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing PVC bathroom cabinet made out of ABS material of size 45x60cm complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 75mm PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls (ISI Marked) complete all as specified and directed by Engineer-in-Charge.

All as per item no. 85 above but 110mm (ISI Marked) complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 75mm PVC(SWR) bend any radius (ISI Marked) complete all as specified and directed by Engineer-in-Charge.

All as per item No 87 above but 110mm dia (ISI Marked) complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 75mm PVC(SWR) junction single (single T) equal or unequal (ISI Marked) complete all as specified and directed by Engineer-in-Charge.

All as per item No 89 above but 110mm bore of pipe (ISI Marked) complete all as specified and directed.

S&F in repairs 75mm PVC(SWR) floor trap with grating including jointing with solvent cement (ISI Marked) complete all as specified and directed by Engineer-in-Charge.

All as per item No 91 above but 110mm (ISI Marked) complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 75mm PVC(SWR) vent cowl (ISI Marked) complete all as specified and directed by Engineer-in-Charge.

All as per item No 93 above but 110mm (ISI Marked) complete all as specified and directed by Engineer-in-Charge.

S&F 500 Ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layered hoisted and fixed in position all as specified and directed in SSR Part-I including dismantling existing water tanks and removing to store complete all as specified and directed by Engineer-in-Charge.

S&F 20mm dia ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge.

Dismantling boarding of any description in any position with nails complete all as specified and directed by Engineer-in-Charge.

M&L for 2nd class hardwood clean sawn weather boarding, plain, 20mm thick or feather edged 15mm to 20mm thick and fixed with 30mm laps complete all as specified and directed by Engineer-in-Charge.

M&L for PCC (1:4:8) type D-2, 75 mm thick using 40 mm graded crushed stone aggregate as in sub base to floors complete all as specified and directed by Engineer-in-Charge.

M&L for chequered cement tiles 300x300x25mm thick set and jointed and pointed in neat cement slurry with grey cement and pigment laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.

Dismantling of plain or corrugated steel sheets any gauge thickness in roof covering complete all as specified and directed by Engineer-in-Charge.

Dismantling of timber scantling of any description and in any position exceeding 40sqcm unframed work complete all as specified and directed by Engineer-in-Charge.

M&L for Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.18 but n exc 0.38 sqm, in each floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.

S&F of pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheets 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.

S&F 5mm thick colour printed PVC sheet fixed on solid PVC wall lining , insulated PVC wall lining fixed to PVC paneling to interlock each panel through grooves and toungue complete all as specified and directed by Engineer-in-Charge.

S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specifications and drawing complete all as specified and directed by Engineer-in-Charge.

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleats and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having curled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. complete all as specified and directed by Engineer-in-Charge.

S&F hangers of 6mm dia GI wire (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified complete all as specified and directed by Engineer-in-Charge.

S&F false ceiling 8mm thick (Non asbestos fiber cement building board) fixed in ceiling flat or sloping inserted in GI/aluminium frame work complete all as specified and directed by Engineer-in-Charge. (Make- Armstrong, saint Gobain)

S&F powder coated anodised aluminium frame (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engineer-in-Charge.

S&F Powder coated anodised aluminium work of any colour (Thickness or powder coating not less than 50 micron). for anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed by Engineer-in-Charge.

S&F Powder coated anodised aluminium work of any colour (Thickness or powder coating not less than 50 micron) for anodised aluminium window (three track) and ventilator shutters, cupboard shutter without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings complete all as specified and directed by Engineer-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames/ glazed with putty or fixed with beads complete all as specified and directed by Engineer-in-Charge.

S&F 5.5mm thick sheet tinted glass ordinary quality and glazing with aluminium beading/clips etc in square exc 0.5 sqm each pane complete all as specified and directed by Engineer-in-Charge.

M&L for timber scantling 2nd class soft wood clean sawn complete all as specified and directed by Engineer-in-Charge.

M&L for one coat of cement based paint on walls including washing, rubbing down and stopping of old painted surfaces complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old painted wooden surfaces over 10 cm width or girth and applying One coats of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

M&L for one coat of oil bound distemper on old surfaces of wall including preparation of surfaces complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Curtain Rod/ drapery rod 25mm dia Decorative type with a pair of brackets, powder coated of approved pattern and colour complete all as specified and directed by Engineer-in-Charge.

Taking down carefully aluminium/copper point wiring (light fan socket or power) complete with fittings such as switches, tube lights, ceiling rose, pendants, regulators, MCB DB, MCB'S, Main switch from control board and making good disturbed surfaces of walls, floor to match with existing and keeping items aside in safe custody for reuse such as regulators, light fitting, MCBs or credit to contractor complete all as specified and directed by Engineer-in-Charge.

M&L for point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core multi stranded flexible cable and 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core cable (green colour) as earth lead in and including PVC casing and capping medium grade of suitable size run on wall/surface with all fittings (ISI Marked) controlled by one switch including CI/MS/ wooden sunk box of required size, & as directed by Engr in Charge & 3mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified.

All as per srl item No-123 here in above but for One 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5 sq. mm size complete all as specified and directed by Engineer-in-Charge.

All as per srl item No-123 here in above but for One 3 pin socket outlet, 5 Amps, independent, with cables 1.5 sq.mm size complete all as specified and directed by Engineer-in-Charge.

All as per srl item No-123 here in above but for One 3 pin socket outlet, 15 Amps, on independent board, with cables 4 sq.mm size complete all as specified and directed by Engineer-in-Charge.

S&F in replacement switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified and directed by Engineer-in-Charge.

S&F in replacement Switch socket combination 2 in 1, 3 pin, 5 Amp flush type universal 240 volt complete all as specified and directed by Engineer-in-Charge.

S&F in replacement Switch socket combination 2 in 1, 3 pin, 15 Amp flush type universal 240 volt complete all as specified and directed by Engineer-in-Charge.

S&F in replacement Fan step regulator, 120W - 2 module type electronic fan regulator, duly ISI marked with and including connector complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of ceiling rose, 3 phase/PVC/ polycarbonate isolated body complete all as specified and directed by Engineer-in-Charge.

S&F in replacement lamp holder (Angular / Straight), insulated body, with back plate for batten fitting complete all as specified and directed by Engineer-in-Charge.

S&F in replacement LED lamp 9 W complete all as specified and directed by Engineer-in-Charge.

S&F in replacement round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge.

S&F in replacement decorative ultra slim linear LED 20 Watt 4' long lighting fixture with extruded al heat sink, environment friendly, energy efficient ready to use pack including LED tube complete with inbuilt electronic driver, PCB, connector block etc. including connecting up three copper flexible cable from ceiling rose to fittings including connecting up and fixed on including two nos PVC square box of required size complete all as specified and directed by Engineer-in-Charge.

S&F in replacement LED Bldg security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all specified and directed.

S&F in replacement sheet metal enclosure Vertical type, Triple pole and neutral, AC, 415 volts, 4 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as specified and directed by Engineer-in-Charge.

S&F in replacement sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as specified and directed by Engineer-in-Charge.

S&F MCCB 4 Pole 63Amps, AC 415 V, 16kA complete all as specified and directed by Engineer-in-Charge.

Supply and fixing MCB, SP, AC, 240 volts "B" series capacity of 06 to 32 Amps, 10kA and making connections complete all as specified and directed by Engineer-in-Charge.

Supply & fixing MCB, SPN (single pole and neutral), AC, 240 volts, B series capacity 32 Amps 10kA and making connections complete all as specified and directed by Engineer-in-Charge.

S&F in replacement Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed.

S&F in replacement exhaust fan 300 mm sweep PVC body with louver, 240 volts AC single phase, 50 Hz, ISI marked, including necessary work in wall/sheet, including connection cable, nut bolt and other fixing material complete all as specified and directed by Engr-in-Charge.

S&F in replacement ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed by Engineer-in-Charge.

Supply and lay cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (Heavy duty) 1100 volts grade with stranded aluminium conductor of size 35 Sqmm 3.5 core complete all as specified and directed by Engineer-in-Charge.

S&F in replacement electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 liter, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches not exceeding 1.5 m wide and n.exc. 1.5 m deep for foundation of poles/stay/cable etc including getting out in hard/dense of soil complete all as specified and directed by Engr-in-Charge.

M&L for Sand cushioning to cable with dry fine sand in trenches as per SSR part - I, including consolidation complete all as specified and directed by Engineer-in-Charge. Note : punned thickness will be measured for payment purpose.

M&L for bricks laid in trenches flat with width equal to length of brick for cable protection well burnt sub class 'B' bricks, laid across the cable complete all as specified directed by Engr-in charge.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed by Engineer-in-Charge.

Removing excavated materials n.exc. 50m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified and directed by Engineer-in-Charge.

Supply and laying Galvanized iron pipe medium grade 20mm bore laid in floor/wall including all accessories complete all as specified and directed by Engineer-in-Charge.

Supply and fixing gate valve 20 mm dia screwed down for iron pipe or brass ferrule complete all as specified and directed by Engr-in-Charge

Supply and fixing gate valve 50 mm dia screwed down for iron pipe or brass ferrule complete all as specified and directed by Engr-in-Charge

M&L for Cutting existing CI/GI pipe line of 20 mm to 50 mm dia and inserting tee and tapping new connection with all accessories complete all as specified and directed by Engr-in-Charge

M&L for concealed point wiring with FRLS PVC insulated, un-sheathed, multi stranded copper conductor cable of 1.5sqmm size, 1100volts, drawn through and including non metallic rigid PVC conduit not less than 25mm with all accessories fixed on wall/ceiling including FRLS PVC insulated, unsheathed, multi stranded copper conductor cable of 1.5sqmm size as earth continuity conductor connected to common earth dolly including required numbers and size of metal junction box/ hylam sheet fixed on wall for fixing the switches, switch sockets,sockets, regulators etc complete including making good disturbed surfaces with CM (1:3) to match with the existing surface and existing colour, complete all as specified and directed. (a) One light point controlled by one 5A switch NOTE: a) Colour coding shall be followed as given below:- i) Phase - Red/Yellow/Blue ii) Neutral - Black iii) Earth - Green b) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit.

(b) One ceiling Fan point controlled by one 5A switch complete all as specified and directed by Engineer-in-Charge.

(c) One 5A flush type switch socket point on same board complete all as specified and directed by Engineer-in-Charge.

(d) One 5A flush type switch socket point on independent board complete all as specified and directed by Engineer-in-Charge.

M&L for concealed point wiring complete with proper colour coding using PVC insulated unsheathed multi stranded copper conductor cable 2.5 sqmm size, 1100 volts ISI marked, FRLS grade drawn through and including non metallic rigid, double lock, ISI marked, not less than 25mm conduit with all accessories such as tee, bends, elbow, reducers, junction box etc fixed on wall/ceiling and one run of PVC insulated unsheathed, multi stranded copper conductor cable of 2.5sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuity conductor connected to common earth dolly with and including junction box/ hylem sheet in any module complete for One 5 pin, 15A switch socket combination on the independent board complete and making good disturbed surfaces with CM (1:3) to match with the existing surface & colour, complete all as specified and directed. Note: (a) Colour coding shall be followed as : i) Phase - Red/Yellow/Blue (ii) Neutral - Black (iii) Earth - Green. b) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit (c) Switch socket measured & paid separately.

S&F in repair of Modular switch 1 way 6A,1 module complete all as specified and directed by Engineer-in-Charge. Make: Anchor/Roma/Legrand/ goldmedal

S&F in repair of Modular switch 1 way 16A,1 module complete all as specified and directed by Engineer-in-Charge. Make: Anchor/ Roma/ Legrand/ goldmedal

S&F in repair of Modular socket, 6A - 2/3 pin combined 2 modules complete all as specified and directed by Engineer-in-Charge.

S&F in repair of Modular socket 6/16A, 2/3 pin, combined 2 module complete all as specified and directed by Engineer-in-Charge.

S&F in repair of Modular fan step regulator, 120W - 2 modular complete all as specified and directed by Engineer-in-Charge.

S&F in repair of White cover plate with frame, 2 module complete all as specified and directed by Engineer-in-Charge.

S&F in repair of White cover plate with frame, 3 module complete all as specified and directed by Engineer-in-Charge.

S&F in repair of White cover plate with frame, 4 module complete all as specified and directed by Engineer-in-Charge.

S&F in repair of White cover plate with frame, 6 module complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of LED 7 watt pin type bulb complete all as specified and directed by Engineer-in-Charge.

S&F in repair of LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Engineer-in-Charge.

S&F in repair of double door type SPN DB 12 Way ,240V with 100A copper busbar each phase , with metalic double door type IP-43 IK 09 protection suitable for housing MCB's all as specified and directed by EIC.Note : MCB DBs shall be concealed in wall where ever posible including making good the surface to match with surrounding complete all as specified and directed by Engineer-in-Charge.

S&F in repairs security light brackets with 1.50mtrs long 40mm dia light grade galvanised iron pipe with 30° bend including flat iron clamps, nuts, bolts and washers to brace the same properly duly painted with two coats of silver coloured synthetic enamel paint over one coat of red oxide primer and making the good to disturbed surfaces to match with existing, complete all as specified and directed.

Supply and lay in replacement cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded copper conductor of size 16 sq mm 2 core. laid in trench/ duct / along pole/wall etc including making connection complete all as specified and directed. Note:The cost of thimbles/lugs and cable gland etc is included in quoted rate and no extra payment will be made for it.

M/S Manzoor Constructions (BID ID -3155695)

M/S Hilal Builders (BID ID -3153564)

JANDOO AND CO (BID ID -3154457)

FIRDOUS AHMAD BABA (BID ID -3161756)