REPAIR/ MAINT OF DG SETS, PUMP MOTORS, SUP OF CHEMICALS AND ALLIED WORKS AT AYODHYA CANTT UNDER AGE (I) AYODHYA.

Amount

Periodical maintenance for entire duration of contract including complete servicing of Diesel Engine Generator set of 160 KVA capacity at Military Hospital of make: Kirloskar or any other make as per site requirement and connected accessories including replacement of oil /lubricant filter to keep the plant in running condition including routine maintenance complete all as specified and as directed. [Note: (i) All Spare parts for routine maintenence will be measured and paid separately under relevent items of this schedule as 'Supply Only'. (ii) Labour charges for routine maintenance including properly dismantling of old parts deemed to be included in the quoted rate]

All as per item Ser No 1.00 here-in-before but of Diesel Engine Generator Set of 62.5/ 63 kVA capacity at Pump House No 1, 2, 3, 4, 5,6,7, 8, 9, 10, 11, 12, STP Himachal Niwas, STP Kandahar Line, Signal Centre, Amn Dump, Trolly Mounted.

All as per item Ser No 1.00 here-in-before but of Diesel Engine Generator Set of 40 KVA capacity.

All as per item Ser No 1.00 here-in-before but of Diesel Engine Generator Set of 15 KVA capacity.

Supply only Lubricant oil filter for routine maintenance of DG Set 160 KVA, complete all as specified and as directed.

All as per item No.5.00 but Fuel filter (Pre).

All as per item No.5.00 but Fuel filter (Micro).

All as per item No.5.00 but Air filter outer.

All as per item No.5.00 but Air filter inner.

Supply only Lubricant oil filter for routine maintenance of 15-62.5 KVA DG Set complete all as specified and as directed.

All as per item No.10.00 but Fuel filter (Pre).

All as per item No.10.00 but Fuel filter (Micro).

All as per item No.10.00 but Air filter outer.

All as per item No.10.00 but Air filter inner.

Supply only Coolant for DG Set complete all as specified and as directed.

Supply only Lub Oil for DG Set of make Koel Care Premium Genuine complete all as specified and as directed.

M&L for Head Gasket set (Cylinder head) of capacity 160 KVA DG set make: Kirloskar or equivalent all as specified and directed. [Labour charges for properly dismantling of old parts deemed to be included in the quoted rate]

All as per item No.17.00 but Alternator coupling.

All as per item No.17.00 but Starter Ring.

All as per item No.17.00 but ON/ Off push button set.

All as per item No.17.00 but Cut out for charging alternator.

All as per item No.17.00 but Ignition Switch for charging alternator.

All as per item No.17.00 but Switch Plate for charging alternator.

All as per item No.17.00 but Diode Plate for charging alternator.

All as per item No.17.00 but Carbon for charging alternator.

All as per item No.17.00 but Bulb Holder for charging alternator.

All as per item No.17.00 but Rectifier Assembly for charging alternator.

All as per item No.17.00 but Brush Box Assembly for charging alternator.

All as per item No.17.00 but Bearing for charging alternator.

All as per item No.17.00 but Oil seal for charging alternator.

All as per item No.17.00 but Field Coil for charging alternator.

All as per item No.17.00 but Hose : Water Pump inlet to Radiator outlet.

All as per item No.17.00 but Hose :Pipe to Water Pump.

All as per item No.17.00 but Hose : Pipe to Diesal tank.

All as per item No.17.00 but Hose pipe with 04 nos clip & nut.

All as per item No.17.00 but Terminal block.

All as per item No.17.00 but Fan Belt.

All as per item No.17.00 but Automatic Voltage Regulator.

All as per item No.17.00 but Water Pump Repair Kit.

M&L for Head Gasket set (Cylinder head) of capacity 15-63 KVA DG set make: Kirloskar or equivalent all as specified and directed. [Labour charges for properly dismantling of old parts deemed to be included in the quoted rate]

All as per item No.40.00 but Alternator coupling.

All as per item No.40.00 but Starter Ring.

All as per item No.40.00 but Expansion bellow.

All as per item No.40.00 but ON/ Off push button set with wiring.

All as per item No.40.00 but Cut out for charging alternator.

All as per item No.40.00 but Ignition Switch for charging alternator.

All as per item No.40.00 but Switch Plate for charging alternator.

All as per item No.40.00 but Diode Plate forcharging alternator.

All as per item No.40.00 but Carbon for charging alternator.

All as per item No.40.00 but Bulb Holder for charging alternator.

All as per item No.40.00 but Rectifier Assembly for charging alternator.

All as per item No.40.00 but Brush Box Assembly for charging alternator.

All as per item No.40.00 but Bearing for charging alternator.

All as per item No.40.00 but Oil seal for charging alternator.

All as per item No.40.00 but Field Coil for charging alternator.

All as per item No.40.00 but Hose : Water Pump inlet to Radiator outlet.

All as per item No.40.00 but Hose :Pipe to Water Pump.

All as per item No.40.00 but Hose : Pipe to Diesal tank.

All as per item No.40.00 but Hose pipe with 04 nos clip & nut.

All as per item No.40.00 but Terminal block.

All as per item No.40.00 but Fan Belt.

All as per item No.40.00 but Automatic Voltage Regulator.

All as per item No.40.00 but Water Pump Repair Kit.

M&L for Calibration of Fuel Injection Pump including properly dismantling and transporting to service center/workshop for over hauling/ calibration and refixing on DG Set after calibration for DG Sets of capacity 160 kVA including taking out of old one and with replacement of following items complete all as specified and directed by Engineer -in Charge :- (a) Element - 06 Nos. (b) D.V - 06 Nos. (c) T.R.B - 06 Nos. (d) Bearing - 02 Nos. (e) C.R - 01 Nos. (f) C.R Bush - 02 Nos. (g) Ball Bearing - 01 Nos. (h) F.P.P - 01 Nos. (j) F.P Kit - 01 Nos. (k) Pressure Bolt - 06 Nos. (l) Nozzle seal - 02 Nos. (m) Nozzle setting - 06 Nos & with all other neessary items .

All as per item Ser No 64.00 above but for DG Sets of capacity 62.5/ 63 KVA.

All as per item Ser No 64.00 above but for DG Sets of capacity 15 KVA.

M&L for Banjo Bolt M 14 x 1.5 including taking out of old one complete all as specified and directed.

M&L for Flexible fuel pipe type 7.5 14 x 14 B 700 PB of make: Kirloskar or equivalent including taking out of old one complete all as specified and directed.

M&L for Fuel Pump mounted STOP solenoid switch suitable for 15 to 62.5-63 KVA DG set of make: Kirloskar or equivalent including taking out of old one complete all as specified and directed.

M&L for servicing of radiator including cleaning and testing of leakages for DG set of capacity 160 KVA complete all as specified and directed [Note:- In case of leakages found during servicing, the same should be measured and paid separately]

All as per item Ser No 70.00 above but for DG set capacity 15-63 KVA.

Dismantling the radiator and transporting to workshop, repair of all leakage and transporting back and refitting in original position and testing for DG set of capacity 160 KVA complete all as specified and directed

All as per item Ser No 72.00 above but for DG set capacity 15-63 KVA .

M&L for Carefully dismantling the fuel tank and transporting to workshop, repair of all leakage, cleaning and transporting back and refitting in original position and testing after completion for DG set of capacity 160 KVA complete all as specified and directed including taking out of old one.

All as per item Ser No 74.00 above but for DG set capacity 15-63 KVA

S&F self starter of DG set of capacity 62.5/ 63 KVA 12/24 volts of any make and model compatible with the existing one complete all as specified and directed

All as per item Ser No 76.00 above but for DG Sets of capacity 15 KVA.

M&L for Carefully dismantling the self starter of DG set capacity 62.5/63 KVA and transporting to workshop and reffiting back after repair with replacement / repair of following items :-

Supply only Carbon bush with spring materials for repair of self starter of DG set capacity 15-160 KVA , complete all as specified and directed.

All as per item Ser No 79.00 but GM Bush set.

All as per item Ser No 79.00 but Bendex Pinion.

All as per item Ser No 79.00 but Solenoid Switch.

All as per item Ser No 79.00 but Armature Rewinding.

All as per item Ser No 79.00 but Field Coil set.

Supply & fixing in replacement of lead acid battery 12 volt 180 Ah including initial charge of make: Exide or equivalent complete all as specified and directed by Engineer-In-Charge

M&L Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, connected with GI strip 25x4mm by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI strip is connected to main switch board and protected by light grade GI pipe of 25 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horizontally to the equipment. Cement concrete chamber of PCC ( 1:3:6 ) type C-2 using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate, excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009).

S&F MCCB 4 pole 100 Amp, 415 volt, of make: L&T or equivalent in existing panel including taking out of old one complete all as specified and directed by Engineer-in-charge.

S&F MCCB 3 pole 100 Amp, 415 volt, of make: L&T or equivalent in existing panel including taking out of old one complete all as specified and directed by Engineer-in-charge.

S&F On load Changeover 4 pole 100 Amp, 415 volt, open execution type of make: L&T or equivalent in existing panel including taking out of old one complete all as specified and directed by Engineer-in-charge.

S&F digital type Voltmeter with LED display suitable for 3 phase of make: L&T or equivalent in existing panel including taking out of old one complete all as specified and directed by Engineer-in-charge.

S&F 3 pole power contactor 220/440 volts with 70 Amp AC3 duty rating any type including auxillary switch of make: L&T or equivalent in existing panel including taking out of old one complete all as specified and directed by Engineer-in-charge.

S&F electronic timer for automatic star delta starter 415 volt 50 Hz 3 - 30 sec of make: L&T, in existing panelincluding taking out of old one complete all as specified and directed by Engineer-in-charge.

S&F digital type Ammeter with LED display suitable for 3 phase make: L&T or equivalent in existing panel including taking out of old one complete all as specified and directed by Engineer-in-Charge.

S&F tape wound ring type Current Transformer suitable for Bar primary of rating 100/5 Amp, burden 5 VA of make: Kappa/ Matrix or equivalent in existing panel including taking out of old one complete all as specified and directed by Engineer-in-Charge.

S&F Single phase Preventer Relay with adjustable time delay 30 sec to 5 min suitable for 415 volt AC, any type of make: L&T or equivalent including internal wiring from switchgear to relay in existing panel including taking out of old one complete all as specified and directed by Engineer-in-Charge.

S&F overload Relay any type suitable for 5 Amp to 30 Amp type ML 415 volt AC of make: L&T or equivalent including internal wiring from switchgear to relay in existing panel including taking out of old one complete all as specified and directed by Engineer-in-Charge.

S&F overload Relay any type suitable for 32 Amp to 88 Amp type MPR of make: L&T or equivalent including internal wiring from switchgear to relay in existing panel including taking out of old one complete all as specified and directed by Engineer-in-Charge.

S&F Indicator lamp LED type (R,Y,B) complete with bakelite fuse complete including taking out of old one complete all as specified and directed by Engineer-in-Charge.

S&F ON and OFF push button flush head type (Red,Green) complete including taking out of old one complete all as specified and directed by Engineer-in-Charge.

M&L for copper lugs 16 sqmm complete including taking out of old one complete all as specified and directed by Engineer-in-Charge.

S & F Three phase submersible pump controller with single phase preventer of rating 3 phase,415V,50 HZ, 40 HP ,Type MU-G40 FASD, of make L&T, Sceinider or equivalent including taking out of old one complete all as specified and as directed .

M&L for fixing of DOL starter three phases 415 Volt for 2 HP electric motor with relay range 2.5-4 Amp including all fixing materials complete all as specified and directed by Engineer-in-Charge.

M&L for fixing of DOL starter three phases 415 Volt for 7.5 HP electric motor with relay range 9-14 Amp including all fixing materials complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing of Flat three core submersible cable PVC insulated and sheathed multistranded copper conductor of cross sectional area 16 sqmm of make: Havells , Kalinga ,Polycab or equivalent .

S&F FR PVC Insulated Single core unsheathed Industrial Flexible cable of size 16 sqmm conforming to IS 694:2010 with bright annealed copper conductor in existing panel including taking out of old one complete all as specified and directed by Engineer-in-Charge. Make : Polycab or equivalent .

Supply only bleaching powder in 25 Kg bag (ISI marked) grade II complete all as specified and directed by Engineer-in-Charge. (Make: Punjab Alkalies/Modi Alkalies/Sriram as approved).

Supply only sodium hypochloride liquid (chlorine content 10%) duly packed in sealed drum of make: M/s Declibac/ M/s Rayalshima Enterprise/ Birla Chemicals or equivalent complete all as specified and directed by Engineer-in-Charge.

Supply only white crystal alum ferric of superior quality duly packed, complete all as specified and directed by Engineer-in-Charge.

Supply only copper sulphate blue crystal of superior quality duly packed complete all as specified and directed by Engineer-in-Charge.

Supply only soda ash of superior quality complete all as specified and directed by Engineer-in-Charge.

Supply only Chlorine ppm comparator test Kit with colour indicators having 0.1 to 2.0 PPM with Resolution 0.01 pH, make:Avon/ Aquasol or equivalent.

Supply only Liquid O-Tolidine solution in sealed bottle of 50 ml complete all as specified and directed

Repair and maintenance of Granular Chlorination Reciprocating dosing pump (Model: 96 NGQ 51), high pressure, single head, gear motored adjustable dosing pump having output of 2 U.S. GPD to 40 U.S. GPD and adjustable high pressure of up to 100 PSI including minor spare parts like, tubing, connection nuts, injection check valve, clay weight, ferrules, water inlet pipe line, outlet with strainer,drain pipe, overflow pipe etc complete all as specified and directed by Engineer-In-Charge.

Repair and maintenance of suction sweeper comprising 600mm long MS/ CI fabricated suction head with PVC wheels, spring loaded brush and fiber squeezer including trolley mounted electric driven non clog self priming type centrifugal pumping set with 02 HP Motor 03 phase , 415 V electric driven along with repair to minor defects such as repair/ replacement to electric contact, kit-kat fuse, pumping set gland rope, coupling nuts & bolts, bush/ thrust bearing of existing size ,oiling/ greasing and testing etc complete including painting with two coat of synthetic enamel paint -of existing colour after removal of old paint / cleaning to rusted/ corrosive portion - 04 Sets [Note:- (i) All type of T&P main switch ,electric multi meter/ tong tester for fault detecting , etc required at site will be arranged by the contractor and rates for the same deemed to be included in the quoted rate. (ii) If item of work is not got executed for any of the suction sweeper-machine, price adjustment shall be made based on the proportional rate worked out from unit quoted rate for the item of work. (iii) Supply of major items required for repair/replacement shall be measured and paid separately under relevant item of this schedule as 'supply only']

Supply only Nylon-Rope size (14 -20) mm dia suction sweeper, complete all specified and directed.

S&F Spire Brush suitable for Cleaning of swimming pool, complete all specified and directed.

S & F PVC wheel with bush and nut bolt set of 04 nos suitable for suction sweeper machine complete all specified and directed by Engineer-In-Charge.

Collection of water samples of bore wells located in deferent pockets of cantonment area in decontaminated sterilised bottles and testing of water samples for following essential parameters for drinking water as per IS:10500- 2012 from Govt Lab or NABL accredited laboratory: - (i) Colour (ii) odour (iii) taste (iv) pH value, (v) Turbidity (vi) TDS (vii) Total arsenic (viii) Silica (ix) Fluoride (x) Iron (xi) Magnesium (xii) Sulphate (xiii) Total Hardness (xiv) Total alkalinity (xv) Calcium (xvi) Conductivity (xvii) Chloride (xviii) Total Coliform and (xix) E Coli all as specified and as directed.

Lifting of defective submersible pump set any make & model of capacity 25 HP to 45 HP from deep well 350mm housing along with connected accessories such as column pipe of 150mm dia appx 30 m submersible cable, steel pipe, spider, sleeve, line shaft, nut, bolts etc complete all as specified and directed by Engr-In-Charge. [Note:- (i) All type of T & P, chain pulley & tripod etc required at site will be arranged by the contractor and rates for the same deemed to be included in the quoted rate (ii) The Contractor will start the lifting work with in minimum time after getting message verbally/telephonically by JE E/M/AGE E/M. (iii) A penalty of Rs. 500/- per day will be imposed on the Contractor for wilful delay by the Contractor will be imposed as per opinion of Engineer-in-Charge and amount will be deducted from the due payment of the Contractor]

Transportation including loading & unloading of defective submersible pump set 3 phase any make and capacity 25 to 45 HP from pump house to work shop for necessary repair and transporting back to the pump house including carefully loading & unloading of pump set after repair complete all as specified and directed by Engineer-In-Charge.

Dismantling of defective submersible pump set any make & model of capacity 25 HP to 45 HP, repairing the same including replacing old unserviceable parts and re-assembling and testing after repair complete all as specified and directed by Engineer-In-Charge. [Note: (i) All the spares required for repair will be measured and paid seperately as supply only. (ii) Greasing of moving parts deemed to be included in the quoted rate]

Supply only CI/ MS bowl (As per existing size) for submersible pump capacity 25 HP to 45 HP any make & model complete all as specified and directed by Engineer-in-Charge.

All per item No.124.00 but Stainless steel shaft with key.

All per item No.124.00 but Gun Metal Bush.

All per item No.124.00 but Stainless steel sleeve.

All per item No.124.00 but Sand Guard.

All per item No.124.00 but Impeller lock with key.

All per item No.124.00 but Neck ring (as per existing size and type).

All per item No.124.00 but Turning & polishing of Pump shaft (lathe work).

Supply only Stainless Steel thrust bearing. parts for submersible motor of capacity 25 HP to 45 HP any make & model complete all as specified and directed by Engineer-in-Charge.

All per item No.132.00 but Carbon plate.

All per item No.132.00 but Rotor Gun Metal/steel bush.

All per item No.132.00 but Rubber bush.

All per item No.132.00 but Upper housing.

All per item No.132.00 but Lower Housing.

All per item No.132.00 but Turning, polishing of Rotor & shaft (Lathe work)..

Rewinding of submersible motor capacity 25 HP to 45 HP any make & model with super enamelled copper wire of existing size including removal of existing burnt winding, cleaning of slots including packing material, connection and testing complete all as specified and directed.

M&L for painting to pump set with two coat of synthetic enamel paint (grey colour) over a coat of red oxide primer after preparation of surface complete all as specified and directed by Engineer-In-Charge.

Lowering, connecting, commissioning testing of repaired submersible set any make and capacity 25 HP to 45 HP 3 phase 415V into bore well 300/200mm with connected items such as column pipe approx 40 RM, properly connecting submersible cable etc complete all as specified and directed by Engineer-In-Charge. [Note:- (i) All type of T & P, chain pulley & tripod etc required at site will be arranged by the contractor and rates for the same deemed to be included in the quoted rate (ii) The Contractor will start the lifting work with in minimum time after getting message verbally/ telephonically by JE E/M/ AGE E/M. (iii) A penalty of Rs. 500/- per day will be imposed on the Contractor for wilful delay by the Contractor will be imposed as per opinion of Engineer-in-Charge and amount will be deducted from the due payment of the Contractor]

Dismantling of defective monoblock motor pump set any make & model of capacity 60 HP & complete servicing including filling of gland dori,greasing of moving parts etc, replacing old unserviceable parts and re-assembling and testing after repair complete all as specified and directed by Engineer-In-Charge. [Note: (i) All the spares required for repair will be measured and paid seperately as supply only. (ii) All type of T&P main switch ,electric multi meter/ tong tester for fault detecting , etc required at site will be arranged by the contractor and rates for the same deemed to be included in the quoted rate.]

Supply only S/S ball bearing for monoblock motor pump of capacity 60 HP of any make & model complete all as specified and directed by Engineer-in-Charge.

All per item No.143.00 but Turning, polishing of Rotor & shaft (Lathe work).

Rewinding of monoblock motor pump set of capacity 60 HP any make & model with super enamelled copper wire of existing size including removal of existing burnt winding, cleaning of slots including packing material, connection and testing complete all as specified and directed by Engineer-in-Charge.

Supply only rubber packing 6mm thick consisting of 8/6" holes for 100mm to 150 mm dia column pipe complete all as specified and directed by Engineer-In-Charge.

Taking out steel water tubing/ UPVC for 20 mm bore size including fittings complete all as specified and directed.

S&F Unplasticised PVC pipes Sch 40 of fixed complete to walls, ceilings or in floors etc., any type of pipe for 20 mm bore sizes make: ISI Marked best quality etc complete all as specified and directed.

Complete servicing of servo voltage stabilizer of 50 KVA of make: Servostar / Vinitec or any other make as per site requirement and connected accessories including replacement of defected old parts, oil / lubricant to keep the plant in running condition including routine maintenance complete all as specified and as directed by Engineer-in-Charge. [Note: (i) The Contractor need to get the job done through authorised service centre/ agency of OEM (Original Equipment Manufacturer).The cost thereof deemed to be included in the quoted rate. (ii) All Spare parts for routine maintenence will be measured and paid separately under relevent items of this schedule as 'Supply Only' (iii) Labour charges for routine maintenance including properly dismantling of old parts deemed to be included in the quoted rate]

Supply only Variac for routine maintenance of servo voltage stabilizer 50 KVA capacity complete all as specified and directed.

All as per item No.150.00 but servo motors (3 Kg).

All as per item No.150.00 but RC Network (for 3 Kg motor).

All as per item No.150.00 but Sensor Transformer 8/16V (Triggar).

All as per item No.150.00 but 2 K Pot.

All as per item No.150.00 but PCB Digital Card (Double Display).

All as per item No.150.00 but Carbon Brush.

All as per item No.150.00 but Voltmeter.

All as per item No.150.00 but Micro Switch.

All as per item No.150.00 but SPDT & DPDT Switches.

All as per item No.150.00 but Buck Boost Transformer.

All as per item No.150.00 but Motorised Plate.

All as per item No.150.00 but Front Plate Variac.

All as per itemNo.150.00 but Armer of Variac.

All as per item No.150.00 but Variac Base.

All as per item No.150.00 but Strip 30 Amp.

All as per itemNo.150.00 but Spring.

All as per item No.150.00 but Hexa.

All as per item No.150.00 but Stopper.

All as per item No.150.00 but Relay 5 Amp.

All as per item No.150.00 but Push Button.

All as per item No.150.00 LED (Green,Yellow,Red).

All as per item No.150.00 PCB Card (High & Low Cut Off).

All as per item No.150.00 Transformer Oil.

Disconnecting electrically incomming and outgoing LT UG cable of LT panel of any size and replace burn/unsv suitable size of aluminium bus bar, Welding work for hinches and doors, fixing the locking arrangement including scraping outdoor/indoor side of LT Panel and one coat of redoxide, two coat of synthetic enamelled seimens gray spray of outdoor/Indoor side and reconnecting LT UG cable with fixing aluminium lugs by using crimping tool, nut, bolt washer etc and all necesary work required for smooth functioning of LT panel complet all specified and directed by Engineer-in-Charge.

S&F in replacement of old existing self reflector type flexi board with PVC frame of size 1.2mx0.8m including diagram of water disribution network at each pump house complete all as specified and directed by Engineer-in-Charge.

M&L for repairing of old damaged cement concrete column for lowering and lifting of submersible motor pump on roof of pump house bulding using PCC (1:3:6) type C-2 using 40 mm graded aggregate as in foundation filling & mass concrete fair finish over surfaces along with painting of ISMB with two coat of black synthetic enamel paint complete all as specified & directed by Engineer-in-Charge.

M&L for demolition of old brick cement work in ground and pavings and repairing the same as directed and fixing of 50x5 mm angle iron U shaped of suitable length upto 5 mtr approx by cutting , welding threading and jointing complete suitable for hanging of Hose Reel Box of fire fighting system with PCC (1:3:6) type C-2 using 40 mm graded aggregate as in foundation filling & mass concrete fair finish over surfaces alongwith two coat of red synthetic enamel paint on angle iron and hose box complete all as specified & directed by Engineer-in-Charge.

M&L for Mild Steel ERW (Electro Resistance Welded) pipe with flanged ends suitable for Column Pipe of bore dia 150mm,8 mm wall thickness including gasket, bolts and nuts for fixing and taking out of old pipes complete all specified and directed by Engineer-in-Charge. [Note: The pipes should be in 3.0 mtr length with both side flanged suitable for column pipe for Bore well]

Attending complaint for rectification of leakage of 50mm bore GI Pipe line including excavation, returning and filling etc including fittings like unions, sockets, bends, elbows, tees, nipples etc as per site requirement and complaint shall be rectified within 24 Hrs from date of complaint failing which recovery shall be charged @ 500 per complaint per day complete all as specified and directed by Engineer-in-Charge

All as per item No.179.00 here-in-before but 25 mm bore.

All as per item No.179.00 here-in-before but 20 mm bore.

All as per item No.179.00 here-in-before but 15 mm bore.

Jairajyadav security services

Puma Power

MISRA TRADING CORPORATION

Super Automobiles

His And Her Enterprises