Special renovation of internal electrical wiring and replacement of main panel and service cable in Ashram Residential School at Bhelwara Sadar, Hazaribagh.

Amount

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core in surface/recessed PVC conduit, with modular switch, modular plate suitable GI box etc as required. a) Group - C

Wiring for light/ power plug with 2x4 sq mm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit along with 1 no 4 sq mm FR PVC insulated copper conductor single core cable for loop earthing as reqd.

Wiring for circuit submain wiring along with earth wire with the following size PVC insulated copper conductor , single core cable in surface / recessed PVC conduit etc as reqd . a) 2x2.5 sq mm + 1x2.5 sq mm Earth wire (For light circuit.)

b) 1x1.5 sq, mm. (For Inverter wiring.)

c) 4x6.0 sq mm + 2x6.0 sq mm (For Submain wiring.)

Supplying and fixing suitable GI box with modular plac and cover in front on surface of in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch. connection, painting etc. as required (For light plugs to be used in non residential buildings)

Supplying and fixing suitable GI box with modular plac and cover in front on surface of in recess, including providing and fixing 6 pin 15/16 amps modular socket outlet and 5/6 amps modular switch. connection, painting etc. as required (For light plugs to be used in non residential buildings)

Supplying and fixing following way, horizontaltype three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB / RCCB / Isolator) a) 4 way (4+12) double door, Horizontal type

Supplying and fixing 6 amps to 32 amps rating, 240 volts, 10 KA, “B” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, esting and commissioning etc. as required.

Supplying and fixing 6 amps to 32 amps rating, 240 volts, 10 KA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, esting and commissioning etc. as required. a) 50/63 Amp, DP MCB (Controling For Street light)

b) 40 amp TPN MCB (Controling For MCB D.B)

S/F stepped type electronic fan regulator on the existing modular plate & switch box including connection but excluding modular plate etc as reqd.

S/F Modular blanking plate on the existing modular plate & switch box excluding modular plate as reqd.

S/F 2 pin 5 Amp Ceiling rose on the existing junction box etc as reqd.

Supplying and fixing batten/ angle holder including connections etc as reqd .

S.I.T.C of floowing rating surface mounted LED tube light fitting suitable for 230V 50Hz, single phase supply etc. complete as required. a) 20/22W LED Tube light

S/F 9/10 watt LED bulb

S.I.T.C. of following size ceilling fan 3 blades confirming to IS:374:2019 including wiring the down roadsof suitable length (up to 30cm) with 1.5 sq. mm. PVC insulated, copper wire suitable for 230V 50Hz, single phase supply etc. complete as reqd. a) 1200 mm (48'') ceiling fan

S/F 12'' (300mm) metal exaust fan

S/F 16'' (400 mm) waall mounted fan

S.I.T.C of floowing rating LED Street lighting luminarie with pressure die cast housing and toughened glass cover (IP 66 protection) in existing pole/pipe for supply voltage 100-270V AC, 50Hz. Luminarie shall be confirm to IS: 10322 part-5/section-3 and shall be complete with all neccssary accessories as required a) 90w L.E.D. Street light.

Supplying and laying of XLPE insulated PVC sheathed aluminium armoured cable working voltage upto 1100 volts as per IS: 7098 (Part I) of following size a) 6 sq mm 2 core (For Street light on building)

b) 16 sq, mm 2 core (From Hostel Building to Principal Residence)

c) 50 sq mm 3.5 core (From main panel to Hostel building)

d) 95 sq mm 3.5 core (From Transformer to main panel)

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. up to 35 sq. mm (clamped with 25mm thick G.I. saidle)

Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size not exceeding 35 sq mm direct in ground including excavation, and refilling the trench etc as rquired, but excluding sand cushioning and protective covering.

Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size exceeding 35 sq mm but not exceeding 95 sq mm direct in ground including excavation, and refilling the trench etc as rquired, but excluding sand cushioning and protective covering.

16 sq mm aluminium lugs

25 sq mm aluminium lugs

50 sq mm aluminium lugs

95 sq mm aluminium lugs

65mm dia, medium class GI pipes Cable laying in road crossing.

Supplying and fixing cable junction box make:- Sintex / Hensel or equivelant.

Earthing with copper earth plate 600mm x 600mm x 3mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (with charcoal or coke and salt) as required.

Supply and laying 8 SWG copper wire at 0.50 metre below ground level for conductor earth electrode, including solding etc. as required.

Fabrication and installation of cubical panel with following accessories made of 16 SWG M.S sheet painted with one coat steel primer and two coat power spray painting with approved shade making PCC plinth and foundation including fitting / fixing / connection & transportation up to work site , labour charge etc all complete.

Add GST 18 %

Add L.Cess 1 %

M/S VIJAYA CONSTRUCTION (BID ID -638902)