Dismantling of AC5 Feeder Breaker from existing location and fabrication, erection, installation, trial run of AC5 Feeder Breaker and Secondary Crusher at new location along with civil works such as foundation, retaining wall etc. including providing

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. All kinds of soil

Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. All kinds of soil

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Cold twisted bars

Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete

Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter

Supplying and stacking stone boulder of size 15cm to 22.5cm at site as per instruction of Engineer-in-charge.

Laying of stone boulder by manually including all lead & lift packing prepoerty as per instruction of Engineer-in-charge.

Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Complete dismantling of AC5 F/Breaker from its existing location hopper, conveyor, primary crusher,secondary crusher , hard stand, plateform chutes etc (Crane will be provided by deptt.)

Shifting/transportation of AC 5 F/breaker at new location (Crane will be provided by deptt. & necessery vehicle/trailer to be arranged by contractor)

Installation & commissioning of complete F/Breaker unit along with secondary crusher including 7 days Trial run

Fabrication and erection of structural steel work rivited bolted or welded in build up section , trussess and framed work including outing hoisting fixingin position and applying a priming coat of approval stell premier.(Hooper repairing of body,chassis, chutes etc)

Painting of equipement along with structural steel work with 3 coat including one coat of primier of red oxide or equipement premier paint of approved brand and 2 coats of enamel paint of approved brand of required shade as directed by engineer in charge.

Complete reconditioning/repairing of wornout conveyor chain drive system of F/ Breaker along with replacement of following components: Flight Bar

Complete reconditioning/repairing of wornout conveyor chain drive system of F/ Breaker along with replacement of following components: T heads Bolts

Complete reconditioning/repairing of wornout conveyor chain drive system of F/ Breaker along with replacement of following components: Nuts

Complete reconditioning/repairing of wornout conveyor chain drive system of F/ Breaker along with replacement of following components: Plumber block Assemly

Complete reconditioning/repairing of wornout conveyor chain drive system of F/ Breaker along with replacement of following components: Grid Spring (Primary)

Complete reconditioning/repairing of wornout conveyor chain drive system of F/ Breaker along with replacement of following components: Grid Spring (Secondary)

Complete reconditioning/repairing of wornout conveyor chain drive system of F/ Breaker along with replacement of following components: Shear Hub

Assistance in operation, maintainance ,cleaning& miscellanious work of feederbreaker and belt conveyor foe one year (365 Days) in all three Shift at CHP,KOCP . Assistance in operation and maintenance of Electrical works shall also be carried out by contractor. ( 3 High Skilled, 9 Skilled & 3 Semi Skilled = 15 Manpower per day ) Rates are inclusive of CMPF ,CP and other head expense etc ,exclusive GST.

Total impact of GST for the purpose of CTC