Loading
Loading…
Loading…
Tender Value
₹1.9 Cr
EMD Value
₹3.7 L
Closing Date
1 Oct 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Deposit Work
Above/Below/Par
DRAWING
29 conditions · 9 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less, where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
(a) Attested Certificates(s) issued by Executive or Nominated Authority of the government Departments or Semi-Government/Public Sector Undertakings for the value of the work done for them during the qualifying period including current financial year certifying the bill amounts paid Agreement-wise and Date-wise or attested photo copy of such certificate. Such certificates will be accepted only from Govt. / Govt. bodies / PSUs authorities. Certificates issued by Private Bodies will not be considered.
(b) Audited Balance Sheets clearly indicating contractual receipts from the works done for Govt./ Govt. bodies / PSUs/Pvt. Organization in the P&L Account of the balance sheet duly certified by the Chartered Accountant for the completed & current Financial years.
NOTE: (i) Financial Year shall normally, be reckoned as 1st April to 31 st March of the Next Year. However, for Turnover Criteria, the Financial Year as applicable to the Company /Tenderer is to be considered, if it defers from the above. (ii) Current Financial year is reckoned as the incomplete Financial year in which the date of tender submission falls. (iii) Chartered Accountant statements duly indicating yearly receipts will not be considered until and unless backed by Audited Balance Sheets. (iv) If the tender is not accompanied by the certificate(s) in support of financial eligibility as above, the tender shall be rejected. No post-tender correspondence will be entertained.
If JV firms are allowed to participate; Financial eligibility of the JV Firm shall be adjudged based on satisfactory fulfilment of the Para No.17.15.2 of part-I of IRSGCC- 2019 for J.V guide lines (with upto date correction slip).
NOTE: If the tender is not accompanied by the certificate(s) in support of financial eligibility as above, the tender shall be rejected. No post-tender correspondence will be entertained.
valid Electrical Contractor license: "The tenderer shall possess a valid Electrical Contractor License, issued by any State Government or Union Territory Administration, authorizing execution of electrical works up to 650V. The contractor shall have in his employment or shall engage a person holding a valid certificate of competency issued by any State Government or Union Territory Administration for supervision of electrical works up to 650V. Offers not accompanied by a valid Electrical Contractor License and requisite Supervisor competency for works up to 650 V shall be summarily rejected". The License should have been issued on a date prior to the date of Tender opening. Clear scanned copy is to be submitted along with the tender. A copy of license should be uploaded through IREPS with their offer, failing which the tender will be rejected.
Similar Nature of work: "Works of wiring/cabling or installation and commissioning of electrical items (other than on coaches) such as lights, fans, pumps, charging arrangements, earthing etc (with or without supply of items/equipments) for 230V, 1phase or 415V, 3phase system or higher voltages". a copy of similar nature of work should be uploaded through IREPS with their offer, failing which the tender will be rejected.
94 conditions · 9 needing a document upload
TENDER SHALL BE REJECTED if it is not accompanied by the following:
Cost of tender document & EMD deposited through IREPS e- payment
In case of Partnership firm : The tender form shall be submitted only in the name of partnership firm.
In case tenderer is JV Firm : The tender form shall be submitted 1.1.2 only in the name of the JV and not in the name of any constituent member.
Uploading of Certificate in support of Technical Eligibility (As detailed in Standard Technical Criteria).
Submission of Certificate(s) in support of Financial Eligibility (As detailed in Standard financial criteria).
IN CASE OF ADVERTISED TENDER VALUE IS MORE THAN RS. 20 CRORES: Bid capacity is applicable, the tenderers should submit proforma attached in DOCUMENTS. In case, the tenderer/s failed 1.3.1 to upload BID CAPACITY PROFORMA along with offer, their/his offer shall be considered as incomplete and will be rejected summarily.
In case tenderer is other than sole proprietorship firm, following documents shall be uploaded by the tenderer:
In case the Tenderer is a Partnership Firm: [i] Partnership deed . [ii]Power of Attorney (duly registered as per prevailing law) in favour of an individual to sign the tender documents and create liability against the Firm. [iii] PAN / TAN number of Partnership firm (PAN / TAN number in the name of any of the constituent partners shall not be considered). [iv]An undertaking by all partners of the partnership firm that they are not blacklisted or 1.4.1 debarred by Railways or any other Ministry / Department of the Govt. of India / any State Govt. from participation in tenders / contracts as on the date of opening of bids, either in their individual capacity or in any firm in which they were / are partners. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract
In case the Tenderer is a LLP Firm registered under LLP Act-2008 (i) a copy of LLP Agreement, (ii) a copy of Certificate of Incorporation; and (iii) a copy of Power of Attorney/Authorisation 1.4.2 issued by the LLP Firm in favour of the individual to sign the tender on behalf of the LLP Firm and create liability against the Firm. (iv) copy of PAN number of the LLP Firm
In case the Tenderer is a Company registered under Companies Act-2013:(i) the copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company; and (ii) A copy of 1.4.3 Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company.(iv) copy of PAN number of the Company.
In case the Tenderer is a Registered Society & Registered Trust: (i) a copy of the Certificate of Registration, (ii) Deed of Formation; and (iii) a copy of Power of Attorney in favour of the 1.4.4 individual to sign the tender documents and create liability against the Society/Trust. (iv) copy of PAN number of the Society/Trust.
Incase JV Firms are allowed to participate: Uploading of MEMORANDUM OF UNDERSTANDING as per the format given in "Documents attached with tender" and also below documents.
In case one or more members is/are Proprietary Firm or HUF, the following documents shall be enclosed:: A copy of notarized affidavit on Stamp Paper declaring that his/her Concern is a 1.5.1 Proprietary Concern and he/she is sole proprietor of the Concern OR he/she is in position of "KARTA" of Hindu Undivided Family (HUF) and he/she has the authority, power and consent given by other partners to act on behalf of HUF.act on behalf of HUF.
In case one or more of the members of the JV is/are partnership firm(s), following documents shall be submitted:]:(a)A copy of the Partnership Deed, (b)A copy of consent of all the partners or individual authorized by partnership firm, to enter into the Joint 1.5.2 Venture Agreement on a stamp paper, (c)A copy of Power of Attorney (duly registered as per prevailing law) in favour of the individual to sign the MOU/JV Agreement on behalf of the partnership firm and create liability against the firm.
In case one or more members of the JV is/are companies, the following documents shall be submitted: (a)A copy of resolutions of the Directors of the Company, permitting the company to enter into a JV agreement, (b) A copy of Memorandum and 1.5.3 Articles of Association of the Company. (c) A copy of Authorization/copy of Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender, sign MOU/JV Agreement on behalf of the company and create liability against the company.
IN CASE THE TENDER VALUE MORE THAN RS. 50 LAKHS; Tenderers shall submit a notarized affidavit on a non-judicial stamp paper stating that all their statements / documents submitted along with bid are true and factual.
Uploading of Declaration regarding Employment of Retired Engineer/Retired Railway Officer as per clause no.17 of Part-I of IRSGCC. [in the format attached in - Documents]
Uploading of NEFT FORM - as per the format attached with the tender document.
The list of personnel / organization on hand and proposed to be engaged for the tendered work.
List of Plant & Machinery available on hand and proposed to be inducted and hired for the tendered work.
Uploading of Statement Showing the particulars of Works on Hand & Works Completed as per the format attached to the tender document.
Uploading of certificate by local suppliers in regard to meeting the Minimum Local Content requirement to avail benefits under Public Procurement Policy Order-2017 (A) for procurement order of value less than Rs. 10 crores: self certificate in accordance with Para-9(a) of Public Procurement(Preference to Make in India) Order 2017. (B) For Procurement Order of value more than Rs. 10 crores, the certificate from Statutory auditor/cost auditor/practicing CA as the case may be in accordance with Para-9(b) of Public Procurement (Preference to Make in India) Order 2017.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
IN CASE OF SINGLE PACKET TENDERS; CONSORTIUM AGREEMENTS, JOINT VENTURE FIRMS AND MOUS SHALL NOT BE CONSIDERED
IN CASE OF TWO PACKET TENDERS CONSORTIUM AGREEMENTS AND MOUS SHALL NOT BE CONSIDERED . BUT JOINT VENTURE FIRMS ARE CONSIDERED FOR ELIGIBILITY.
CONDITIONS FOR PARTICIPATION OF PROPRIETARY FIRM / PARTNERSHIP FIRM /PRIVATE LIMITED COMPANY / LIMITED COMPANY/ JV FIRMS:
In case the tenderer is an individual / proprietary concern, the experience and turnover shall be in the name and style of the Individual / Proprietary concern only.
In case the tenderer is a Partnership Firm, the experience and received contractual payments shall be in the name and style of the firm only. The other guidelines at Clause 18 of Part I of 4.1.1 IRSGCC shall be applicable . Note: The partner of a Partnership Firm cannot claim the credentials of Partnership firm to the extent of his share either during the subsistence of the Partnership firm or after its dissolution.
FOLLOWING DOCUMENTS SHALL BE ENCLOSED:
In case the Tenderer is a Partnership Firm: [i] Partnership deed . [ii]Power of Attorney (duly registered as per prevailing law) in favour of an individual to sign the tender documents and create 4.2.1 liability against the Firm. [iii] PAN / TAN number of Partnership firm (PAN / TAN number in the name of any of the constituent partners shall not be considered).
In case the Tenderer is a Company registered under Companies Act-2013:(i) the copies of MOA (Memorandum of Association) and AOA (Articles of Association) of the company; and (ii) A copy of Authorization/Power of Attorney issued by the Company 4.2.2 (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company.(iii) copy of PAN number of the Company.
In case of JOINT VENTURE (JV) FIRMS: Clause No.17 of Part-I of IRSGCC with upto date correction slip shall be applicable in all aspects for Participation of Joint Venture[JV] firms in works tenders. JV firm should submit Memorandum of 4.2.3 Understanding[MOU] as per the format attached as annexure to the tender in DOCUMENTS. Submission of all other documents by JV firm / Members of JV should also be as per Cl.No.17.14 of Part-I of IRSGCC.
In case the Tenderer is a LLP Firm registered under LLP Act-2008 (i) a copy of LLP Agreement, (ii) a copy of Certificate of Incorporation; and (iii) a copy of Power of Attorney/Authorisation 4.2.4 issued by the LLP Firm in favour of the individual to sign the tender on behalf of the LLP Firm and create liability against the Firm. (iv) copy of PAN number of the LLP Firm
In case the Tenderer is a Registered Society & Registered Trust: (i) a copy of the Certificate of Registration, (ii) Deed of Formation; and (iii) a copy of Power of Attorney in favour of the 4.2.5 individual to sign the tender documents and create liability against the Society/Trust. (iv) copy of PAN number of the Society/Trust.
Uploading of other relevant documents connected to the tender; such as Declaration regarding employment of Retired Engineer/ Retired Railway officer, NEFT Form, List of Personnel/Organization, List of Plant/machinery, Particulars of works on hand and completed (As per the formats attached in the list of Documents)etc.
Hyderabad Division: 1) Construction of Staff Quarters 11 nos. (Type II - 8 Nos, Type III- 2 Nos, Type IV - 1 Nos) for Tr.D at KMC- Electrical Arrangements 2) Construction of Tower Car Shed for Tr.D at UMRI- Electrical Arrangements
31-DEP-26-27-SrDEE-M-HYB~SCR
31-DEP-26-27-SrDEE-M-HYB
Open
Works - General
12 Months
Hyderabad, Telangana
₹0
₹3.7 L
3 Sept 2026
3 Sept 2026
17 Sept 2026
330 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,27,56,704 | ||
| — | 3290.00 | — | — | ||
| Supply & laying of 25 mm dia 2 mm thick PVC conduit pipe in concealed or as per the directions of engineer at site | — | — | — | 1,01,990 | |
| — | 2400.00 | — | — | ||
| Supply & laying of 32 mm dia 2 mm thick PVC conduit pipe in concealed or as per the directions of engineer at site | — | — | — | 1,32,000 | |
| — | 700.00 | — | — | ||
| Supply & fixing of PVC conduit moulded bend pipe 32/25 mm dia 2 mm thick in concealed | — | — | — | 19,600 | |
| — | 1190.00 | — | — | ||
| Supply & fixing of PVC Junction box of suitable way for 32/25 mm dia 2 mm thick PVC conduit pipe in concealed | — | — | — | 29,750 | |
| — | 370.00 | — | — | ||
| Supply and laying of flexible 25mm PVC pipe | — | — | — | 6,660 | |
| — | 288.00 | — | — | ||
| Wiring Point: Wiring with two runs of 1.5 Sq.mm 1100V and one run of flexible copper conductor 1.5Sq.mm 1100V FRLS PVC insulated wires ISI marked (Phase, neutral and earth) in the existing PVC conduit pipe with 6A flush modular type switch including 2 way switches where ever required, 6A Bell push modular type switch, ceiling rose, bulb holder and modular type plate cover to G.I. switch control box including all labour charges complete for light points, ceiling fan points and exhaust fans points, call bell point, etc. | — | — | — | 1,33,344 | |
| — | 57.00 | — | — | ||
| Supply, fixing, connecting and commissioning of 6A 5pin modular plug socket, with 6A modular control switch on existing control board with wiring. | — | — | — | 9,291 | |
| — | 143.00 | — | — | ||
| Supply and fixing of 16A, 5 Pin flush type power plug and socket and 16A switch control (5 in one) GI box with top plate cover control for power plug point connections and all labour charges etc. | — | — | — | 43,329 | |
| — | 143.00 | — | — | ||
| Supply and fixing 20A switch with LED indicator similar to GM make | — | — | — | 18,304 | |
| — | 51.00 | — | — | ||
| Supply & fixing of 20/25A capacity MCB DP similar to GM make as per the directions of engineer at site (for ac units) | — | — | — | 22,185 | |
| — | 3500.00 | — | — | ||
| Supply, laying, connecting & commissioning of single core multi strand 1.5 sq. mm FRLS Cu. Conductor | — | — | — | 59,500 | |
| — | 6300.00 | — | — | ||
| Supply, laying, connecting & commissioning of single core multi strand 2.5 sq. mm FRLS Cu. Conductor | — | — | — | 1,76,400 | |
| — | 4800.00 | — | — | ||
| Supply, laying, connecting & commissioning of single core multi strand 4 sq. mm FRLS Cu. Conductor | — | — | — | 2,11,200 | |
| — | 750.00 | — | — | ||
| Supply, laying, connecting & commissioning of single core multi strand 6 sq. mm FRLS Cu. Conductor | — | — | — | 70,500 | |
| — | 750.00 | — | — | ||
| Supply, laying, connecting & commissioning of single core multi strand 10 sq. mm FRLS Cu. Conductor | — | — | — | 88,500 | |
| — | 660.00 | — | — | ||
| Supply, laying, connecting and commissioning of 3 core 1.5 mm sq.mm multi stranded FRLS cu. Conductor as per the directions of Engineer at site | — | — | — | 38,280 | |
| — | 11.00 | — | — | ||
| Supply & fixing of ding dong call bell | — | — | — | 2,530 | |
| — | 11.00 | — | — | ||
| Supply & erection of modular type bell push switch as per the directions of Engineer at site | — | — | — | 1,529 | |
| — | 30.00 | — | — | ||
| Supply & erection of 2 way module size GI sheet metal/PVC box in concealed/surface similar to GM make or equivalent as per the directions of Engineer at site | — | — | — | 1,200 | |
| — | 30.00 | — | — | ||
| Supply & erection of 2 module size modular plates with unbreakable frame similar to GM make or equivalent as per the directions of Engineer at site | — | — | — | 1,380 | |
| — | 30.00 | — | — | ||
| Supply & erection of 3 way module size GI sheet metal/PVC box in concealed/surface similar to GM make or equivalent as per the directions of Engineer at site | — | — | — | 1,830 | |
| — | 30.00 | — | — | ||
| Supply & erection of 3 module size modular plates with unbreakable frame similar to GM make or equivalent as per the directions of Engineer at site | — | — | — | 2,310 | |
| — | 22.00 | — | — | ||
| Supply & erection of 6 way module size GI sheet metal/PVC box in concealed/surface similar to GM make or equivalent as per the directions of Engineer at site | — | — | — | 2,112 | |
| — | 22.00 | — | — | ||
| Supply & erection of 6 module size modular plates with unbreakable frame similar to GM make or equivalent as per the directions of Engineer at site | — | — | — | 2,684 | |
| — | 30.00 | — | — | ||
| Supply & erection of 8 way module size GI sheet metal/PVC box in concealed/surface similar to GM make or equivalent as per the directions of Engineer at site | — | — | — | 3,660 | |
| — | 30.00 | — | — | ||
| Supply & erection of 8 module size modular plates with unbreakable frame similar to GM make or equivalent as per the directions of Engineer at site | — | — | — | 4,590 | |
| — | 30.00 | — | — | ||
| Supply & erection of 12 way module size GI sheet metal/PVC box concealed/surface similar to GM make or equivalent as per the directions of Engineer at site | — | — | — | 4,740 | |
| — | 30.00 | — | — | ||
| Supply & erection of 12 module size modular plates with unbreakable frame similar to GM make or equivalent as per the directions of Engineer at site | — | — | — | 5,670 | |
| — | 74.00 | — | — | ||
| Supply, fixing, connecting and commissioning of 20 Watts 1200mm LED aluminium tube light fitting with lamp including wiring connections etc. as per enclosed specification | — | — | — | 41,662 | |
| — | 22.00 | — | — | ||
| Supply and fixing of 10W LED tube light 6500K (cool day light) suitable to operate on 230V 50Hz AC supply as per detailed specification | — | — | — | 7,150 | |
| — | 11.00 | — | — | ||
| Supply & fixing of LED mirror light as per specification given below:-LED mirror light S/S body with white LED, using existing fixtures in put, Voltage range of 180 to 270V AC power factor>0.90, high power LEDs having efficiency 120 lumens/Watt, THD<10%, driver efficiency>90% etc. complete LED | — | — | — | 10,890 | |
| — | 26.00 | — | — | ||
| Supply and fixing of 3W foot lights as per specification direction of engineer at site | — | — | — | 9,022 | |
| — | 52.00 | — | — | ||
| Supply and fixing of 9W LED cool day light regular Lamp as per the directions of engineer at site. | — | — | — | 6,708 | |
| — | 26.00 | — | — | ||
| Supply, fixing, connecting and commissioning of Waterproof 10W LED modern wall lamp decorative lights up and down outdoor wall light as per the directions of engineer at site. | — | — | — | 22,750 | |
| — | 26.00 | — | — | ||
| Supply, fixing, connecting and commissioning of 5 Watts LED triangle shape wall sconce light fixture Decorative Lighting - multicolor as per the directions of engineer at site. | — | — | — | 23,374 | |
| — | 38.00 | — | — | ||
| Supply & fixing of 1200 mm sweep energy saving BLDC ceiling fan with copper winding & operated with remote, 300mm length of down rod(without shackle), input power not more than 28W, minimum 1.1mm aluminium blade material, double ball bearing, 2 canopy, to be operated in AC single phase supply. | — | — | — | 1,05,716 | |
| — | 36.00 | — | — | ||
| Supply and fixing of of 10"/ 250mm sweep noise less exhaust fan complete with all connected accessories. | — | — | — | 69,768 | |
| — | 11.00 | — | — | ||
| Supply, erection, commissioning of 8 way TPN vertical double door Distribution Board with the following switchgear 1 x 63A 4 Pole ELCB 6 KA with 100mA sensitivity, 2 x 20A 10KA DPMCB, 2 x 32 A 10kA SPMCBs, 5 x 16 A 10kA SPMCBs, 8 x 10 A 10kA SPMCBs | — | — | — | 1,35,212 | |
| — | 11.00 | — | — | ||
| Supply and fixing of 6 way TPN double door with lock & key distribution board with 1x32A TPMCB (I/C), 3x20A DP MCB, 6x20A SP MCBs outgoing including internal connections, grouting, fixing, testing earthing and all labour charges etc. complete including cable entry box and trunking arrangement. | — | — | — | 64,713 | |
| — | 11.00 | — | — | ||
| Supply and fixing of 4 way VTPN Distribution Board including all connected accessories etc. | — | — | — | 1,62,800 | |
| — | 11.00 | — | — | ||
| Supply and fixing of microprocessor type 125A 4P MCCB, 35kA breaking capacity with adjustable microprocessor release conforms to IS/IEC: 60947-2 as per the directions of engineer at site | — | — | — | 1,41,955 | |
| — | 11.00 | — | — | ||
| Supply, erection, commissioning of 63A 4 Pole ELCB 6 KA with 100mA sensitivity | — | — | — | 41,184 | |
| — | 36.00 | — | — | ||
| Supply and fixing of 20A SP MCB 'C' curve 10KA | — | — | — | 5,004 | |
| — | 11.00 | — | — | ||
| Supply, erection, connecting and commissioning of single phase LPRF meter duly removing the existing meter. | — | — | — | 27,500 | |
| — | 7.00 | — | — | ||
| Supply, erection, connecting, testing and commissioning of DCU. | — | — | — | 1,26,000 | |
| — | 7.00 | — | — | ||
| Supply, erection, connecting, testing and commissioning of Repeater. | — | — | — | 17,500 | |
| — | 12.00 | — | — | ||
| Provision of software with billing facility per quarter | — | — | — | 3,600 | |
| — | 37.00 | — | — | ||
| Supply & provide RF network planning and commissioning per meter with all accessories. | — | — | — | 12,432 | |
| — | 1.00 | — | — | ||
| Suitable mobile application for sharing of energy consumption details and power consumption pattern with the occupants of the service buildings/staff quarters | — | — | — | 2,500 | |
| — | 3.00 | — | — | ||
| Supply of three phase prepaid cum post paid smart energy meters microprocessor based dual source, operating on 240 volts 50hz three phase ac supply tamper proof electronic static energy meters, capacity of range 10-60 amps with led display capable of recording cumulative energy consumption, power factor measurement, under and low voltage protection, confirming to IS:16444, default/in, compatible only with LORAWAN communication with connector kit & antenna for online energy monitoring/billing system with disconnection/reconnection through remote and data export to ERP, provision for data down load with USB and existing Railway energy billing system with minimum warranty of 5 years. | — | — | — | 30,600 | |
| — | 3.00 | — | — | ||
| Erection, installation, testing & commissioning of Microprocessor based Single phase & Three phase tamper proof electronic static pre paid cum post paid energy meter as per the direction of engineer at site. | — | — | — | 1,800 | |
| — | 3.00 | — | — | ||
| Hosting, GPRS charges for 5 years warranty period. Make: BSNL/Airtel/JIO/VI. | — | — | — | 36,000 | |
| — | 3.00 | — | — | ||
| Supply, fixing, testing & commissioning of configuration of Local Server Hosted multi user web based software with following modules (Software with Life time license) and support for minimum 5 years. (i) Meter data management Modules: The meter data management module would be responsible for collecting the data from the concentrator and make the data available to the billing system. The billing system would support offline meter data entry. The meter data management system would capture and provide the following data. ii) Mobile Application for all Railway Users (a)30min instantaneous data from all the meters for seven parameters - cumulative energy, Power, Current, Voltage, Power factor and frequency. (b)Monthly and quarterly billing survey data for cumulative energy and max demand. (ii) Billing Module: The billing module would collect the data from the meter data management module, calculate billing determinant and make energy data/ billing data available to admin and end user.(iii)Occupation and Vacation module: The system would support occupation/ vacation based on the unit categories. The system would support automatic data capture on occupation and vacation events. (iv)Customer Module: The system would include a customer portal for the resident/occupants to log in and view their own energy/billing data. (v) Energy Accounting module: The system would include features of energy accounting, the system would to able to account for total energy block wise, facility wise and would also allow calculations of the unaccounted energy in case total energy meter is also available.(vi)Communication Module: The system would provide communication of energy data and bills via print, email and SMS methods. (vii)Meter Master Data: The system would support meter days repository. The system would support meter system replacement process. (viii) Excel Export: The system would support export of metering and billing data in excel format. | — | — | — | 5,400 | |
| — | 3.00 | — | — | ||
| Supply, installation & commissioning of additional CT 100/5A that fit for Meters | — | — | — | 4,500 | |
| — | 260.00 | — | — | ||
| Supply, fabrication and installation of MS checker plates of 6mm thickness along with channels and all connected accessories as per directions of engineer at site | — | — | — | 42,900 | |
| — | 3000.00 | — | — | ||
| Supply, laying, connecting, testing and commissioning of 4core 70 mm² LT XLPE Al. UG Cable, 1100 Volts as per IS:7098/Pt.I/1988 | — | — | — | 17,79,000 | |
| — | 1200.00 | — | — | ||
| Supply, laying, connecting, testing and commissioning of 4core 25 mm² LT XLPE Al. UG Cable, 1100 Volts as per IS:7098/Pt.I/1988 | — | — | — | 2,83,200 | |
| — | 1600.00 | — | — | ||
| Supply, laying, connecting, testing and commissioning of 4core 16 mm² LT XLPE Al. UG Cable, 1100 Volts as per IS:7098/Pt.I/1988 | — | — | — | 3,05,600 | |
| — | 5800.00 | — | — | ||
| Supply and fixing of G.I. wire earth continuity of 8 SWG G.I. wire | — | — | — | 52,200 | |
| — | 3300.00 | — | — | ||
| Excavation of cable trench 30 cm widex90cm deep in all types of soils for LTUG cable as per the direction of engineer at site. | — | — | — | 4,29,000 | |
| — | 1000.00 | — | — | ||
| Cutting of asphalted road/ concrete/ cement/ under the track etc., and excavation of cable trench 30 cm widex90cm deep road etc., for laying of LTUG cable. After laying of cable the trench should be brought to its original position by providing tar/ concrete/ cement as per the site conditions and as per directions of Rly. Engineer. | — | — | — | 2,16,000 | |
| — | 600.00 | — | — | ||
| Supply & fixing with suitable clamps/joints of 50 mm dia "B" class G.I. pipe as per the directions of engineer at site | — | — | — | 2,13,000 | |
| — | 3300.00 | — | — | ||
| Supply & erection of HDPE pipe of 50 mm dia, PN-6, PE-100 of material grade as per IS 4984-2016 or latest, as per the directions of Engineer at site | — | — | — | 5,94,000 | |
| — | 11.00 | — | — | ||
| Supply and fixing of 4 module Plexo Junction Box for MCB IP 65 protection. | — | — | — | 16,830 | |
| — | 110.00 | — | — | ||
| Supply & fixing of cable termination lug as per the site requirement | — | — | — | 11,000 | |
| — | 3.00 | — | — | ||
| Design, supply, installation, testing and commissioning of cubicle type 14SWG LT panel (Indoor type) with 200 amps sectionalized electrolytic copper bus bar (phase RYBN uniform sizes). LT switchgear confirming to IS-8623 or latest. Advanced Multi function meters with CTs of suitable capacity with R.S.485 port for incoming supply with CTs of suitable and RYB LED indication lamps with all other connected accessories etc., as directed by Engineer at site. 2x100 A 4pole 35/36KA microprocessor based MCCB (I/C), 1x100A change over switch Out goings: 4x63 Amps RCBO 100mA, 2x16A SP MCB.Note: MCCBs:1) ICs=100% ICu 2) All MCCBs should be microprocessor based | — | — | — | 3,16,482 | |
| — | 8.00 | — | — | ||
| Supply & erection of 5m long hot dip galvanized octagonal pole with 130mm bottom A/F and 70mm top A/F, made up of 3mm thick HT Sheet & Bakelite sheet & suitable MCB including suitable size of loop-in & loop-out connectors (for mounting inside the base compartment of pole with hinged door opening arrangements), with base plate of size 200x200x12mm, M16X 600 long 'J' type EN8 grade foundation bolts, with 1000mm Single arm bracket for fixing of LED light with all connected accessories, etc. | — | — | — | 58,528 | |
| — | 12.00 | — | — | ||
| Supply & erection of 5m long hot dip galvanized octagonal pole with 130mm bottom A/F and 70mm top A/F, made up of 3mm thick HT Sheet & Bakelite sheet & suitable MCB including suitable size of loop-in & loop-out connectors (for mounting inside the base compartment of pole with hinged door opening arrangements), with base plate of size 200x200x12mm, M16X 600 long 'J' type EN8 grade foundation bolts, with 1000mm Double arm bracket for fixing of LED light with all connected accessories, etc. | — | — | — | 1,15,884 | |
| — | 14.00 | — | — | ||
| Provision of concrete foundation and constructing the plinth as per the directions of engineer at site. | — | — | — | 56,042 | |
| — | 36.00 | — | — | ||
| Supply, erection, connecting, testing and commissioning of 60W LED street light complete with necessary clamps and hardware etc. as per Railway specification | — | — | — | 1,01,160 | |
| — | 8.00 | — | — | ||
| Supply, fixing, connecting and commissioning of 90/100 watt LED based street light luminary with cool white light, pressure die cast aluminum housing, IP 65 or better having system complete as specification. | — | — | — | 44,000 | |
| — | 11.00 | — | — | ||
| Supply and fixing of Pillar light Antique light on walls outdoor with lamp holder and LED warm white bulb as per directions of engineer at site. | — | — | — | 27,489 | |
| — | 60.00 | — | — | ||
| Cutting and chipping the wall for laying the PVC conduit pipe and plastering after laying the PVC conduit pipe with cement and sand mortar mixed with 1:8 ratio, but without laying PVC conduit pipe. | — | — | — | 2,040 | |
| — | 550.00 | — | — | ||
| Supply, fixing, connecting & commissioning of GI strip of size 25x3 mm as per the directions of the engineer at site. | — | — | — | 37,400 | |
| — | 5.00 | — | — | ||
| Supply, fixing, connecting and commissioning of automatic light controlling nature switch device, grade sensors and advanced micro-controllers with suitable power contactor and MCB, enclosed in a FRP enclosure for pole mounting, confirming to IS-54 and similar to swadeep-02 EC-03 kW 1phase. The device should have the following specifications: 1)Operating voltage range:120V, AC 50Hz 2)Switching endurance 5000 cycles of ON and OFF minimum 3)Operating illumination levels a)for switching On-less than 60Lux for 30 seconds b)for switching OFF-greater than 10Lux for 30 seconds 4)Auto voltage levels a)High voltage trip/auto reset - if voltage and gt 280 AC/and it 270V resp. 5)LED for indicating the operating status 6)During based switching OFF option of 04 to 08 hours with resolution of 1/2 hour 7)Override option-continuous ON and continuous OFF | — | — | — | 45,770 | |
| — | 11.00 | — | — | ||
| Supply & erection of a maintenance free earthing with single rod as per RDSO specification No. RDSO/ PE/ SPEC/ PS/ 0109-2008 Rev 0 or latest | — | — | — | 95,700 | |
| — | 6.00 | — | — | ||
| Design, supply and fixing of 10 KWp rooftop on-grid solar plant with, MPPT technology with Monocrystalline Solar Panels of 535wp or above, Module Mounting Structure, Power Conditioning Unit (PCU) consisting of Maximum Power Point Tracker(MPPT), Inverter (10KW output pure sine wave inverter), and Controls and Protections, interconnect cables and switches all complete as per the standard specifications as per the direction of site Engineer. | — | — | — | 38,52,240 | |
| — | 3.00 | — | — | ||
| Supply of stainless steel sand/mud proof submersible pump of 7.5HP vertical type energy efficient submersible pump with a total head of 300Mts with a discharge of 30LPM at total head suitable to work on 3-ph with pump maximum outer dia 98mm as per the directions of engineer at site | — | — | — | 1,71,666 | |
| — | 3.00 | — | — | ||
| Supply, testing & commissioning of Fully automatic Star Delta Starter with wideband coil i-ph preventer, dry run protection & all connected accessories suitable for operation on 415V, 3Ph 50Hz AC supply Relay range 30-50, coil voltage:380V test and Guarantee certificate should be provided at the time of supply, similar to Make: M/s. Havells/L&T/ABB/Siemens as per the direction of Engineer at site (for upto 30HP) | — | — | — | 1,28,709 | |
| — | 12.00 | — | — | ||
| Supply & fixing of Screw ends type Non-Return Valve, 50mm dia with all the connecting accessories as the direction of the engineer at site. | — | — | — | 51,000 | |
| — | 6.00 | — | — | ||
| Supply & fixing of flane ends type gate valve, 50mm dia with all connecting accessories as per the direction of the engineer at site. | — | — | — | 14,364 | |
| — | 4.00 | — | — | ||
| Lowering of submersible pumps (HDPE Pipe) in the existing bores of various capacities Upto 600 Ft depths including transportation of pumps from depot to site. The required tools, Nipple, Reducers, couplers, PVC & water proof taperolls, Trypod, man power, transportation shall be at the contractor's cost only including all connected accessories etc. as per the direction of site Engineer. | — | — | — | 14,584 | |
| — | 6.00 | — | — | ||
| Supply & fixing of 4 No's of 2"x1.5', 6" GI bore cover, 2" GI bend, GI coupler, 2"x3' GI for coupling, suitable capacity nut & bolt the GI/HDPE pipe and pump & connected accessories as per the directions of engineer at site | — | — | — | 14,808 | |
| — | 700.00 | — | — | ||
| Supply, laying, connecting and commissioning of 3 core 4Sq.mm copper flat cable as per the direction of site Engineer. | — | — | — | 1,17,600 | |
| — | 4.00 | — | — | ||
| Supply, installation, testing and commissioning of Intelligent Field Device (IFD) having inbuilt energy metering, Analog Inputs, Digital Inputs, Digital Outputs, GPRS communication/ethernet, LAN, Wi-Fi, etc., display along with filter power circuit having fuses, AC to DC power supply providing adequate DC Supply options (Viz. 5V/12V/24V etc.) with battery back for monitoring and control of Pumps, 30-70% Lighting, Street Light(s), Lift(s), Escalator(s), Substation, etc. capable of monitoring & control electrical parameters, sensors parameters with necessary control capability through internet cloud computing along with integration with CRIS software & technical support as per specifications IFD (2 x 2) | — | — | — | 5,10,020 | |
| — | 3.00 | — | — | ||
| Technical Support to IFDs & other related items as per Specs for 1 years after two years warrantee. Annual Subscription inclusive of Intelligent Field Devices and communication charges for with unlimited role based access from Anywhere over Internet Browser for Monitoring Reports, Alerts, Administration, Control etc., Data storage and 24x7 Hosted Data Center Management, SIM Charges with data, SMS based Alerts and control, Daily Automated Reports and Unlimited Department Access. | — | — | — | 54,000 | |
| — | 200.00 | — | — | ||
| — | 200.00 | — | — | ||
| — | 200.00 | — | — | ||
| — | 200.00 | — | — | ||
| — | — | — | 11,000 | ||
| — | 22.00 | — | — | ||
| — | — | — | 8,580 | ||
| — | 22.00 | — | — | ||
| — | — | — | 18,700 | ||
| — | 8.00 | — | — | ||
| — | — | — | 4,29,200 | ||
| — | 200.00 | — | — | ||
| Supply and fixing of Flexible Copper Shielded Cable 1sqmm 3 Core for Sensor Signal Communication | — | — | — | 11,000 | |
| — | 220.00 | — | — | ||
| Design, supply and fixing of FOAM BOARD & PRINTING, 0.3 cm thick and durable, but extremely light, High-quality matte finish and colour as per the direction of Engineer at site | — | — | — | 1,32,000 | |
| — | — | — | 57,80,410 | ||
| — | 20.00 | — | — | ||
| Supply & erection of 5m long hot dip galvanized octagonal pole with 130mm bottom A/F and 70mm top A/F, made up of 3mm thick HT Sheet & Bakelite sheet & suitable MCB including suitable size of loop-in & loop-out connectors (for mounting inside the base compartment of pole with hinged door opening arrangements), with base plate of size 200x200x12mm, M16X 600 long 'J' type EN8 grade foundation bolts, with 1000mm Single arm bracket for fixing of LED light with all connected accessories, etc. | — | — | — | 1,46,320 | |
| — | 20.00 | — | — | ||
| Excavation of pit for octagonal pole/ poles of suitable size in all type of soils as per the direction of engineer at site | — | — | — | 20,000 | |
| — | 14.00 | — | — | ||
| Provision of concrete foundation and constructing the plinth as per the directions of engineer at site. | — | — | — | 56,042 | |
| — | 20.00 | — | — | ||
| Supply, fixing, connecting and commissioning of 60W LED street light complete with necessary clamps and hardware etc. as per Railway specification | — | — | — | 56,200 | |
| — | 10.00 | — | — | ||
| Supply, fixing, connecting and commissioning of 90/100 watt LED based street light luminary with cool white light, pressure die cast aluminum housing, IP 65 or better having system complete as specification. | — | — | — | 55,000 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
NEFTForm.pdf
ATTACHMENT
ExperianceCertificate.pdf
ATTACHMENT
GCC_April-2022_2022_New.pdf
ATTACHMENT
CorrectionSlip2022_CE-I_CT_GCC-2022Policy14.07.2022_1.pdf
ATTACHMENT
ACS-3toGCCApril.2022RBCE_CE-I-CT2023_04_26.pdf
ATTACHMENT
ACS-2toGCC-2022-CE-1-CT-GCC-2022-POLICY_13.12.2022.pdf
ATTACHMENT
GCCACS11dt.13.03.2026.pdf
ATTACHMENT
ApprovedTB31-26-27SQtrdkmc.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .