CA No CWE/PAT/T-48/2019-20 COMPLETION OF INCOMPLETE WORK IN BLDG NO P 05 (16 QTRS)

Amount

Excavation in trenches exceeding 1.5m in depth but not exceeding 3.00 m deep for laying of pipe, cable, foundation of electric pole etc and getting out in soft/loose soil, complete all as specified.

Returning, filling in including spreading leveling watering and well ramming in layers not exc. 25 cm thick complete all as specified and directed.

Removing surplus soil to a distance not exc. 50 M and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and directed.

Plain cement concrete 1:2:4, type B-0 using 12.5 mm graded stone aggregates as in roof kerbs or mud stops,copings and the like including rounded or chamfered on edges including provision of necessary formwork, complete all as specified.

Precast Cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregates as in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including all mouldings but excluding frame, set in cement mortar 1:4 complete all as specified.

Plain cement concrete 1:3:6, type C- 0, using 12.5 mm graded crushed stone aggregates as in base for over head tank, padding over roof finishing the surface even and smooth including necessarry use and waste of forrmm work, and the like complete all as specified.

Plain Cement concrete 1:7:12 type F-1 using 40mm to 63mm graded crushed stone aggregate as in filling of sunken portion complete all as specified and directed.

Brick work using old size bricks, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar 1:6, complete all as specified.

Brick work using old size bricks (EXCEPT BRICKS) straight or curved on plan exceeding 6.00 metre mean radius, built in cement mortar 1:6, complete all as specified. Note: Brick retrived from srl item 102 to be reused

Supply only water proofing compound,ISI MARKED complete all as specified.

Factory made 35 mm thick, second class hard wood, plain framed, Glazed and skelton shutter ,open rebated and prepared to receive glass,gauze,etc(without sash bars),edgesof framing plain,chamfered or rounded.fitted with cut and mitred beads for securing glass,etc size of members of shutters as specified in SSR Part I,Section 8,clause8.24 (a) fitted to chowkat complete all as specified.

Factory made, 35 mm thick, second class hard wood, plain framed, hammer marked, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified.

Taking down chowkhats or frame not exceeding 1.5 Sq.m each with shutter(s) (without taking off shutters from the frame), including removing to store, complete all as specified.

Solid PVC Door frame of size 50 mm x 47mm made out of 5mm plain PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening, complete all as specified.

Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame, complete all as specified.

Butt hinges, PVC and fixed with screws, 100 mm size, ISI marked, complete all as specified.

PVC barrel tower bolts and fixed, 200 mm long, dia of bolt not less than 10 mm, ISI marked, complete all as specified.

PVC handle of size 150mm complete all as specified.

Butt hinges, medium weight, cold rolled mild steel and fixed with screws or with welding to existing MS frames, 100 mm size, ISI marked, complete all as specified.

Mild steel barrel tower bolt with 10mm dia bright bolt of length 200mm, stove enameled black all as specified.

Mild steel sliding door bolt of size 250mm clip type, stove enameled black with bright bolt not less than 16mm dia, with and including a minimum of 6 bolts and nuts, four on bolt clips and two on staple plate & fixed, complete all as specified and directed.

Mild steel pressed handle of size 125mm oval type stove enameled black all as specified.

Second class hardwood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours; articles n exc 200 cu. cm each, complete all as specified

Galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of operature 1.18 mm and fixed with tinned tacks or galvanized wire staples, all as specified.

Mild steel,rat tail rod, 300 mm, helical door spring including roller and roller plate, fixing to iron frame by welding complete all as specified.

Chromium plated mild steel tubing of 19/20 mm bore, 1.00mm wall thickness as in curtain rod complete including fixing brackets, stops etc including taking down existing curtain rods all as specified. Note: For the purpose of measurement and payment running length of curtain rod only shall be considered.

Mild steel TMT bars 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

Mild steel framed work for door chowkhats framing for cladding, glazing and like; (made out of angle iron of size 40X40X 6mm); cut to shape including bending and welding as necessary with complete accessories required for fixing chowkhat as well as for hard ware fittings, complete all as specified and directed. Note: All connected MS works shall be measured under this item except butt hinges which shall be measured and paid for separately as supply only.

Factory made steel window box type using ERW hollow 'P' section comprising double frame for and including gauged and glazed Skeleton shutter jointed internally with flat iron 40x4mm complete including grill of 8mm square bars, fixed horizontally @ 10cm c/c, hinges, handle, tower bolts, stops, lugs etc. all as shown on drawing No.TD-276 sheet 1/3 to 3/3 dated 28.02.17 as applicable complete. Note: (i) For the purpose of measurement & payment double shutter with frame shall be considered as one unit. (ii) Unit rate quoted against this item shall also include the iron mongery and grill as shown on drgs. (iii) Glazing, wire mesh & painting shall be measured & paid for separately.

Built in steel cup board with pressed steel frame of size 75 mm x 45 mm x 1.25 mm thick with pressed steel shutter 01 mm thick Godrej pattern fixed to masonry wall by hold fasts, made out of 25 x 3 mm flat iron including mild steel, CP hanging rod of 20mm dia with brackets fixed on inner side of one leaf of shutter and on other leaf provision of mild steel CP peg set of 3, including spray painting with two coats of synthetic enamel paint over one coat of red oxide primer all around on steel surfaces of frame & shutter including taking down old existing wooden cup board and making good disturbed portion in CM 1:3 or PCC 1:2:4 all as directed and shown on Drg. No. 178 sheet 2/3 & 3/3 dt12.06.2001.

Water proofing tratment to floor & vertical surfaces of sunken portion complete all as specified particular specification clause 11.2

40 mm bore tubes ,‘medium grade’, galvanized 50cm long as spouts in sunken portion and fixed complete to walls and ceilings or laid in floors, complete all as specified.

25 mm thick, cement concrete 1:2:4 type B-0, using 12.5 mm graded crushed stone aggregate, finished fair, using extra cement, as in flooring, complete all as specified.

50 mm thick, cement concrete type C-1, 1:3:6 using 20 mm graded crushed stone aggregate, finished even & smooth without using extra cement, as in plinth protection, complete all as specified. Note: The plinth protection shall be laid in panels and length of each panel shall not be more then 2.00 metre . 6mm joints filled with 85/25 grade bitumen and sand in ratio 1:3 to be provided. No deduction for joints shall be made in measurement.

First quality, glazed ceramic, not less than group-II, straight cut/edge/joint free, colored 7-9mm thick tiles of size 250X350mm on vertical surfaces such as dados etc over & including 10 mm thick cement mortar (1:4) screed, set and jointed with grey cement slurry and pointed in grout of matching shade of tiles complete all as specified. Note : Tiles to be fixed in concept matching Concept colour and shade will be approved by Engineer-in-charge.

First quality, group-IV, non-skid ceramic, straight cut/joint free, 7-8 mm thick colored tiles, of size 300x300mm , in floors & skirting etc. over & including 15 mm thick cement mortar (1:4) screed, set and jointed with grey cement slurry & pointed with grout of matching shade, complete, all as specified. Note : Tiles to be fixed in concept matching. Concept colour and shade will be approved by Engineer-in-charge.

Kota stone slab 15-18 mm thick on vertical surfaces like riser of steps, skirting, dado and cooking plateform etc. laid over & including 10 mm thick (average thickness) cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (Granite finish), complete all as specified.

Machine cut mirror polished, kota stone slab (nearest to 58cmx58cm in size), 18mm (+ 2mm) thick as in flooring laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4 and jointed with grey cement slurry @ 2 kg/sqm mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish complete all as specified.

Granite jet black shade, 15-18 mm thick, machine cut, machine polished, as in kitchen plateform, window-cill, jambs and like over & including 10 mm thick cement mortar 1:4 screed, set and jointed with grey cement slurry & pointed with grout of matching shade, complete, all as specified.

Taking down cement plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified.

15mm thick cement plastering in cement mortar 1:4 on fair faces of brick work or concrete external surfaces finished even & smooth without using extra cement mixed with integral liquid water proofing compound of approved make (Approved by GE) as per manufacturer's instructions complete all as specified and directed. Note: - Integral liquid water proofing compound shall be measured and paid for separately against respective item of BOQ

Rendering 10 mm thick on internal faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar 1:6, without using extra cement complete all as specified.

Rendering 5 mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling in cement mortar 1:3, without using extra cement complete all as specified.

Dismantling loose/disintegrated portion of RCC Chajjas, bands, shelves, beams,coloumn or slab and similar work including support if required and stitching of cracks with MS U clamps of 8mm dia @ 150mm c/c with inserting concrete block strecthner with cement mortar 1:3 mixed with adhesive chemical (polymer based) and reinforced with PVC chicken mesh including form work where ever required and finished with 10mm thick plastering in cement mortar 1:4 finished even & smooth without using extra cement including preparation of surfaces to receive finishes complete all as specified and directed.

Preparation of new surfaces of wall (including cornices, pilasters etc) and applying three coats of whitewash complete all as specified.

Preparation of new surfaces of wall (including cornices, pilasters etc) and applying two coat of cement base paint over a coat of cement primer complete all as specified.

Preparation of new surfaces of ceiling(including cornices, pilasters etc) and applying three coat of white wash complete all as specified.

Applying chalk whiting on new wall surfaces smoothening the surfaces with sand papers etc.,and applying two coats of dry distemper on wall surfaces complete all as specified.

Plain Sheet glass 4 mm thick, ordinary quality and glazing with oil pane putty in squares not exceeding 0.5 sqm in each pane, complete all as specified.

Figured glass, 4 mm thick, pin head type and glazing with oil putty in squares not exceeding 0.5 sqm in each pane, complete all as specified.

Two coats of synthetic enamel paint over & including a coat of pink primer over new wood and wood based surfaces of any description, not otherwise described over 10 cm width or girth, including preparation of surfaces complete all as specified.

Two coats of synthetic enamel paint over new steel surfaces of any description, not otherwise described over 10 cm width or girth, including preparation of surfaces complete all as specified.

One coat of synthetic enamel paint over old steel surfaces of any description, not otherwise described over 10 cm width or girth, including preparation of surfaces complete all as specified.

15 mm bore tubes , ‘medium grade’, galvanized with all fittings and fixed complete to walls and ceilings or laid in floors, complete all as specified.

Re-fixing old steel tubes and connections of size 15 mm bore in new or old position (walls, ceilings, floors etc.) complete all as specified. NOTE: GI tube taken down under serial item No 62 shall be fixed under this item.

20 mm bore tubes , ‘medium grade’, galvanized with all fittings and fixed complete to walls and ceilings or laid in floors, complete all as specified.

Re-fixing old steel tubes and connections of size 20 mm bore in new or old position (walls, ceilings, floors etc.) complete all as specified. NOTE: GI tube taken down under serial item No 63 shall be fixed under this item.

Taking up or down steel tubing 15 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified.

Disconnecting and taking down, water storage tanks of any description of capacity exceeding 250 litre but not exceeding 500 litre and setting aside for refixing or removing to store etc. complete all as specified.

500 litre capacity, double layered, rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), ISI marked, hoisted and fixed in position, complete all as specified.

20 mm bore GI unions to connect iron to polyethylene and fixed in repair, ISI marked complete all as specified.

Ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, suitable for 20 mm bore GI pipe, complete all as specified.

Stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, chromium plated, screwed both ends, for iron pipe or for union and fixed, suitable for 20 mm bore pipe, IN REPAIR, complete all as specified.

Bib taps, cast copper alloy with crutch or butterfly handle, chromium plated fancy type, screwed down,with long shank and cup suitable for 15 mm bore pipe or for brass ferrule,IN REPAIR, complete all as specified.

Concealed stop valve, cast copper alloy, screwed down, high pressure with handle, chromium plated, with long shank , screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIR, complete all as specified.

Cast copper alloy, pillar tap with capstan heads, chromium plated,screwed down high pressure, suitable for 15 mm bore pipe, IN REPAIR, complete.

Brass chromium plated tubular towel rail 20mm dia, D type, 60cm long between flanges fixed with and including chromium plated brass screws and PVC rawl plugs IN REPAIR, complete all as specified.

PVC connections 15 mm size with PTMT nuts of length 450 mm IN REPAIR, complete all as specified.

Soap dish, vitreous China white, approximate size 160x160x90mm complete all as specified.

Shower rose brass cromium plated 125mm size with shower arm 15mm size,195 mm long with bend of 45 degree with flange for fixing with 15mm pipe IN REPAIR, complete all as specified.

Grating doom 100 mm dia of PTMT (Minimum weight 25 gms),IN REPAIR, complete all as specified.

PVC(SWR) pipes, 110 mm external dia, (Wt not less than4.00Kg per Sqcm), ISI marked (IS:13592) single socketed in any length with rubber ring joints,fixed to wall, as rain water pipes, IN REPAIR, fixed to wall with and including mild steel clamps 40x3mm complete all as specified.

PVC bend any radius, conforming to IS:14735, suitable for uPVC rain water pipes 110 mm size, complete all as specified.

100mm dia,Cast iron soil, waste and vent pipes, spun type, ISI marked (IS:3989), in any length with or without ears, with cement joints, IN REPAIR, fixed to wall with and including mild steel clamps 50x3mm complete all as specified.

75mm dia,Cast iron soil, waste and vent pipes, spun type, ISI marked (IS:3989), in any length with or without ears, with cement joints, IN REPAIR, fixed to wall with and including mild steel clamps 50x3mm complete all as specified.

100mm dia,Cast iron soil, waste and vent pipes, spun type, ISI marked (IS:3989), in any length with or without ears, with lead joints, laid in trenches or in floors complete all as specified.

75mm dia,Cast iron soil, waste and vent pipes, spun type, ISI marked (IS:3989), in any length with or without ears, with lead joints, laid in trenches or in floors complete all as specified.

Cast iron branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches suitable for Cast iron soil waste discharge pipes 75 mm bore, with oval access door, ISI marked, IN REPAIR, complete all as specified.

Cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches suitable for Cast iron soil waste discharge pipes 100 mm bore, with oval access door, ISI marked, IN REPAIR, complete all as specified.

Cast iron bends (any radius), with duck's foot or heel rest, suitable for 100 mm bore spun pipes, ISI marked, IN REPAIR, complete all as specified.

Cast iron bends (any radius), with duck's foot or heel rest, suitable for 75 mm bore spun pipes, ISI marked, IN REPAIR, complete all as specified. Note for serial item 82 to 89 : Lead joints shall be measured & paid for separately if provided in lieu of cement joints under respective item.

Extra over cast iron pipes and fittings of size 100 mm bore if lead joint is provided in lieu of cement joint complete all as specified.

Extra over cast iron pipes and fittings of size 75 mm bore if lead joint is provided in lieu of cement joint complete all as specified.

Cast iron cowl, ISI marked, suitable for100 mm bore CI spun pipes IN REPAIR, complete all as specified.

Cast iron cowl, ISI marked, suitable for75 mm bore CI spun pipes IN REPAIR, complete all as specified.

Cast iron 'P' or 'S' trap,having 300mm to 450mm lonng tail ISI marked, suitable for 100 mm bore CI spun pipes IN REPAIR, complete all as specified.

Cast iron floor trap, 75 mm bore, including jointing to waste pipe set in cement concrete type B-1(1:2:4) of size 200 mm x 200 mm x 250 mm, IN REPAIR, complete all as specified.

Kitchen sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar & providing cantilever brackets, overall size 940mm x 455mm & bowl size 405 mm x 355m x 178 mm, ISI marked, IN REPAIR, complete all as specified.

Vitreous china squatting pan Orrisa pattern, size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe anti syphonage pipe etc fixed , IN REPAIR ,complete including making good to floors.

10 litres capacity, PVC valveless syphonic action type Flushing cistern low level with inlet ball valve and all standard accessories including 32mm dia PVC flush pipe fixed, IN REPAIR,including connections and making good the disturbed surfaces in CM 1:3 complete all as specified and directed.

Vitreous china wash hand basin white flat back size 550 x 400mm, 32mm PVC waste pipe, cast iron brackets and PCC 1:2:4 type B-I using graded stone aggregate for embedding brackets and making good disturbed surfaces in CM 1:3 complete fixed , IN REPAIR, all as specified and directed.

Demolitions floor hearth or wall tiling including cement mortar bedding removing serviceable tiles to store and rubbish off the premises, complete all as specified.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground) complete all as specified.

Dismantling of cast iron pipes with all fittings and fixing acessories, jointed in cement mortar any bore upto 100mm, at any location, complete all as specified.

Dismantling of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc.laid, bedded and pointed in any mortar complete all as specified.

Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified.

Point wiring in PVC conduit concealed for one light/fan point/bell point/ independent point controlled by one switch with PVC unsheathed FRLS stranded copper conductor 1.5 sqmm cable drawn through in & including PVC rigid conduit 19/20mm dia ISI marked with 1.5 sqmm earth lead of PVC insulated single core stranded copper conductor FRLS connected to common earth dolly and providing pressed steel terminal boxes with 3 mm thick laminated plastic sheet top cover complete including cutting chases to brick wall for inserting PVC conduit and making good in CM 1:4 and finishing the surface to match with the existing surfaces all as specified and directed

All as per item No.99 here-in-before but for 5 Amp 5 pin socket outlet on independent board.

All as per item No. 99 here-in-before but for 5 Amp socket outlet on the same board.

All as per Srl item No. 99 hereinbefore but controlled by two, two way switches

All as per Srl item No. 99 hereinbefore but with 2.5 Sqmm (Nominal area) PVC insulated sheathed fire retardant copper conductor cable for independent 15 Amp socket outlet. MAKE OF CABLE for item 99 to103: FINOLEX, INDO ASIAN, L&T, RPG, NICCO. MAKE OF CONDUIT for 99 to 103 : BEC, FINOLEX, PRINCE, SUPREME.

Switch piano flush type single pole one way, 5 Amps fixed on laminated sheet top cover complete all as specified and directed.(laminated sheet top cover is included in point wiring).

Switch piano flush type single pole one way, 15 Amps fixed on laminated sheet top cover complete all as specified and directed.(laminated sheet top cover is included in point wiring).

Switch piano flush button single pole two way, 6 Amp complete all as specified.

Socket outlet two-in-one, 5 pin 5 Amps flush type fixed on laminated sheet top cover (laminated sheet top cover is included in point wiring).

Socket outlet two-in-one, 3 pin 5 &15 Amps flush type fixed on laminated sheet top cover complete all as specified and directed. (laminated sheet top cover is included in point wiring).

Switch piano, bell/buzzer push, flush button single pole one way, 6 Amp complete all as specified.

Electric bell, AC 230 volt, single pole, Ding Dong type complete, all as specified.

Fan regulators electronic step up type, ISI marked, stepped range hum free including making necessary connections to make in function complete all as specified

Ceiling rose, surface bakelite, 65 x 50mm, three terminals complete, all as specified. MAKE FOR ITEM 111 to 119 : C & S ELECTRIC, STANDARD, HAVELLS, POLYCAB, FINE, PLAZA, CONA, INDOASIAN

MCB single pole 240 volts of capacity 06 to 32 Amp 10 KA all as directed and specified.

MCB single pole and netural 240 volts of capacity 63 Amp all as directed and specified. Make for item 120 &121: L & T , ABB, SCHENEIDER, SEIMENS, LEGRAND, HAGER, INDO ASIAN, C&S ELCTRIC, KALINGA PREMIUM, HAVELLS, HPL, BENLO, HPL ELECTRIC & POWER LTD, ANCHOR

MCCB,100 Amp, 415 volt, four pole 3phase, having breaking capacity 16 KA complete all as specified. Make: STANDARD, HPL ELECTRIC & POWER LTD, ANCHOR, ABB, L&T, SCHNEIDER, LEGRAND C&S ELECTRIC, SIEMENS, GE POWER, INDOASIAN

Vertical three phaseMCB distribution board powder coated double door flush mounted complete with locking arrangement suitable for 4 way TPN, with provision of MCCB as incomers and MCB's as out going with rated bus bar link 230 volt AC supply complete all as specified.

Sheet metal enclosures double door,DBs 8 ways complete with 200 Amp rated bus bar 230 volts stove enameled dust and vermin proof suitable for MCCBs & isolators etc including flushing in wall as approved by GE all as specified Make for serial item 123 & 124:- C & S ELECTRIC, BCH, INDOASIAN, HAVELLS, CROMPTON, ANCHOR, GE POWER, HPL, STANDARD ELECTRICALS, PLAZA

LED retrofit lamp 9 watt with B22 holder base with polycarbonate body and aluminum heat sink warm white and making connection with PVC insulated copper conductor 3 core cable of size 0.5 Sq. mm, complete all as specified. MAKE: C & S, Bajaj , Crompton Greaves,Havells,Philips,Birla power.

Indoor decorative PVC extruded or extruded aluminum housing with acrylic cover T-5 LED batten-integrated type luminaire 10 watt and making connection with PVC insulated copper conductor 3 core cable of size 0.5 Sq. mm, complete all as specified. MAKE: C & S, Bajaj , Crompton Greaves ,Havells,Philips, Birla power.

Indoor decorative PVC extruded or extruded aluminum housing with acrylic cover T-8 LED batten-integrated type luminaire 18/20 watt and making connection with PVC insulated copper conductor 3 core cable of size 0.5 Sq. mm, complete all as specified. MAKE: C & S, Bajaj , Crompton Greaves ,Havells,Philips, Birla power.

Pixel bulk head fitting LED 1 x 11 watt and making connection with PVC insulated copper conductor 3 core cable of size 0.5 Sq. mm, complete all as specified.

LED security light fitting 25 watt with IP 43 in engineering plastic husing with clear plastic diffuser and making connection with PVC insulated copper conductor 3 core cable of size 0.5 Sq. mm, complete all as specified. Make for Srl item 125 to 129 : INSTA POWER, HPL ELECTRIC & POWER LTD, PHILIPS, OSRAM, CROMPTON GREAVES, BAJAJ C&S SURYA ROSHNI, HAVELLS

Sub main wiring (with approved colour coding as per IS) with single core FRLS PVC insulated flexible istranded copper conductor 1.1 KV grade (main cable : number of runs indicated below) along with one run of single core FRLS PVC insulated flexible stranded copper conductor 1.1 KV grade for earthing in conduits, complete all as specified for following sizes of conductors: - (a) 2 runs of 6sq. mm main cable + 1 run of 4 sq. mm earth cable MAKE OF CABLE: FINOLEX, RPG, BCH, INDO ASIAN, NICCO. NOTES: (i) Conduit & conduit accessories shall be measured & paid for separately. (ii) For payment purposes, total runs of main cable (each run of one running metre) as mentioned above and one run (one running metre) of earth cable shall be considered together as "1 RUNNING METRE"

25 to 32mm dia, rigid non metallic PVC concealed conduit, 'ISI marked', inclusive of all fittings (such as junction boxes, bends, elbows, tees, reducers, bell mouth tube ends) and all fixing accessories such as couplers lock nuts, saddles, pipe hooks etc for wiring, complete all as specified. Make : PLAZA, FINOLEX, BAJAJ, KALINGA PREMIUM Note:Cutting chases, pinning in, making good will be measured &paid for under respective item.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends, or edges of landings etc. and cutting chases for concealed water tubing, concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth, in brick walls, complete all as specified.

Earthing complete with galvanized cast iron earth plate electrode 600 x600x6.0mm buried directly in ground(earth pit not less than 2.25 mtr below normal ground level) with top edge of earth plate not less than 1.5 mtrs below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts,nuts, and galvanized iron or steel all as shown on electrical plate No-3 of SSR 2009-1 Part-1 connected to earthing test point all as specified or indicated including earth work in any type of soil, charcoal salt 15cm around the earth plant as shown in electrical plate No. 3 of SSR Part 2009, 20 mm dia watering pipe light grade 1.70 mtr long with plug at top, GI protection pipe light grade 15 mm dia from earth pit to main boad including testing after completion. Note:- (i) Maximum length of GI wire, protection pipe with each earth shall not exceed 7.5 mtrs

Hanging and connecting up ceiling fan of any sweep comprising the repair/ replacement all as directed, as under: - (a) All necessary greasing, oiling and as directed. (b) Scrapping the old paint completely and applying spray painting with synthetic enamel paint after preparation of surfaces & applying red oxide primer. (c) Writing MES No. in black synthetic enamel paint. (d) Replacement of rubber bush, nuts, bolts washers and split pin(s). (e) Replacement of three core flexible PVC copper conductor cable of size 23/0.0076 from ceiling rose or connector to fan.

Sand cushioning with clean dry sand to cables with layer of sand 8cm before laying of cable and 15cm thick after laying of cable complete all as specified. Note : For payment purpose punned thickness of 18cm shall be measured against spread thickness of 23cm as mentioned in para 19.75 of SSR part-I

Sub class 'B' old size burnt bricks of class designation 75, for cable protection laid length wise perpendicular to the axis of cable, adjacent to each other complete, all as specified

XLPE insulated, galvanised steel strip/wire armoured, heavy duty, LT cable with stranded aluminum conductor, 1100 volts grade, 3.5 core 35 Sq.mm cross sectional area laying in trenches, passing through pipes, fixed along walls and/or poles complete all as specified. MAKE : CCI, FINOLEX, UNIVERSAL CABLES, RPG, KEI, INDUSTRIES PVT LTD, KALINGA PREMIUM, EON, GLOSTER, POLYCAB, HAVELLS, ANCHOR NOTE: Excavation & earthwork, sand cushioning and protection cover ordered if any will be meaured & paid for separately.

40mm dia tubes ‘light grade’, galvanized with all fittings, laid in trenches or fixed along poles with mild steel clamps, as protection to cable, IN REPAIR, complete all as specified MAKE : JINDAL PIPES, TATA, BST, PRAKASH TUBES, OSWAL, BHUSHAN, APL APPOLO

Taking out existing damage/unservisable PVC\Pilca insulated, armoured, aluminium conductor 1100V grade cable of any size and core from trenches, pipes, walls and/or poles, stagging properly testing for serviceability of cable, cutting and segregating serviceable portion for relaying & depositing unservisable cable in MES store yard complete all as specified NOTE: Excavation and earthwork shall be measured and paid for separatily

Vipin Kumar and Brother

Arneja Builders

AR CONSTRUCTIONS

DELTA CONSTRUCTION CO

M/S RAJ KUMAR GUPTA

m/s panchmukhi builders

FAVOURITE ENGINEERS

Buttar Construction Co.

Norton Builders