NPP Gursarai Mohalla Narayanpura Me Antyeshti Sthal Ka Nirman Karya

Clearing jungle including uprooting of rank vegetations grass, bush, wood trees and saplings of girth upto 30 cm. Measured at a height of 1 metre above ground level & removal of rubbish upto a distance of 50 metres outside the periphery of area cleared. SI No. 259.Ch-4.

Earth work in filling and cutting for embankment with mechanically compacted.

Boring of 30 cm dia piles of double under reamed of 50 cm dia of bulb and 3.5 m depth in black cotton soil with hand operated auger machine including all labour and T&P etc. for proper completion of work. As per IS Code 2911 (Part-III) 1980.New Item 5, Ch- 4.

Excavation in soil mixed with moorum/ shingle/ kankar requiring the use of special T&P such as pickaxes, subbals etc.including lift upto 1.5 metre (5 fts.) and lead upto 30 m (100 fts) & including filling, watering and ramming of excavated earth into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-charge upto a distance of 30 m. (100 fts) from the foundation trenches. S.I no - 252.Ch.4

Sand filling in plinth including supply of necessary quantity of sand approved quarry from the site of work & including watering, dressing etc. Rate to include cost of all materials, labour and tools & plants etc. (As per S.I. no.-255)

Cement concrete with 4 cm (1.5") gauge approved stone ballast, approved coarse sand and cement in the proportion of 8 : 4 : I including supply of all materials, labour and T & P etc. required for proper completion of the work. SI No. 281

R.C.C work with cement approved coarse sand and 2 cm. (3/4") gauge approved stone ballast in the proportion of 1:1.5:3 in Plinth beam/lighter beam excluding supply of reinforcement and its binding wire and including its fixing and binding the same with 24 B W.G.G.I. binding wire an including neccecary centering & shuttering etc & also including supply of all materials labour & T&P etc required for proper completion of the work. Binding wire cost being included in the item No-285 1st.Ch-5.

RCC work with cement approved coarse sand, and 2cm (3/4") gauge, approved stone ballast in the proportion 1:1.5:3 in Column, excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.I. binding wire, an including necessary cantering and shuttering etc and also including supply of all materials, labour and tools and plants etc. required for proper completion of the work binding wire to be supplied by the contractor free of cost.SI No.288-1st.Ch-5.

First class Brick Work with Cement mortar 1:6 (1 cement : 6 fine sand) of 1.25 FM. mortar in foundation and plinth i/c supply of all materials , labour and T&P etc .sl. No. 303.

First class Brick Work with Cement mortar 1:4 (1 cement : 4 fine sand) of 1.25 FM. mortar in super structure i/c supply of all materials , labour and T&P etc .sl. No. 305.

Earth work in cutting or in Filling in ordinary soil, excavation to be in the form of regular pits not exceeding 1/2 metre (20") in depth and earthwork in embankment to be in 20 cm(8") layers, including ramming & dressing the surface to required levels and slopes and also including 1.5 metre (5fts) lifts and 30 m. (100') lead. The earth from cutting to be used in making filling or to be deposited as spoil banks within 30 metres (100 fts) distance as directed by Engineer-in-charge. S.I. No.253.Ch-4.

RCC work with cement approved coarse sand, and 2cm (3/4") gauge, approved stone ballast in the proportion 1:1.5:3 in Beam, excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.I. binding wire, an including necessary cantering and shuttering etc and also including supply of all materials, labour and tools and plants etc. required for proper completion of the work binding wire to be supplied by the contractor free of cost. s.i no -286(1) Ch-5.

RCC work with cement approved coarse sand, and 2cm (3/4") gauge, approved stone ballast in the proportion 1:1.5:3 in Slab, excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.I. binding wire, an including necessary cantering and shuttering etc and also including supply of all materials, labour and tools and plants etc. required for proper completion of the work binding wire to be supplied by the contractor free of cost. S.I. No.284 (1) Ch-5.

Mild steel or iron work in plain work such as reinforced concrete/brick work (when not included in over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel, its wastage and hooks, and authorized over lapping shall be measured.SI. No. 504.Ch-10

12 mm thick plaster on brick work minimum thickness not less than 10 mm with cement mortar in proportion of 1:6 cement and fine sand of 1.25 fineness modulus including supply of all materials, labour and tools and plants etc required for proper completion of the work.SI No.17.58(III)

15 mm thick plaster on rough side brick work minimum thickness not less than 10 mm with cement mortar in proportion of 1:6 cement and fine sand of 1.25 fineness modulus including supply of all materials, labour and tools and plants etc required for proper completion of the work.SI No.17.59(3)

Providing and applying Plaster of paris putty of 2 mm Thickness over plasterod surfaco to prepare the surface even and smooth complete. S.I. No. New item Ref. DAR-13.26. Ch.-15.

One priming coat and Two coat oil distemper on new work including supply of all materials, labour and T&P etc. required for proper completion of work SI.No.649+650, Ch-15.

Finishing walls with water proof cement paint of approved make and quality on new work with three coats to give an even shade including supply of all materials labour, tools and plants etc. required for proper completion of work.SI No.660+661

25 mm cement concrete flooring 1:2:4(1 cement : 2 coarse sand : 4 graded stone aggregate of size 12.5 mm and below) by laid over base concrete finished with floating coat of neat cement (base concrete to be paid separately) including fixing of glass strips. (Excluding cost of glass strips) SI. No. 14.69 Ch.-14.

Kota stone slab 20 mm thick in kitchen slab over 20 mm thick base of 1:4 cement morter laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab S.i no 14.43 (a), Ch-14.

Supply of M.S. Angle iron door, windows ventilation frame made of approved M.S. angle iron wroght to required form including drilling hole, welding and recetting where necessary and also including supply of all material, such as steel hinges of required size, nut & bolts etc. and also including all taxes, wastage and one coat of red oxide paint complete in all respect as per direction of Engineer-in-charge for proper completion of work at site of work.S.I. No. New item-2, Ch-10.

Supply & fixing of 32mm thick flush door shutter including supply and fixing of wooden cleats and stops and Including fixing and adjustment of hinges, bolts, locks, handles, springs, and/or other fitting but excluding their supply and including painting WIth two coats of Black Japan on all iron fittings if necessary & includirg fixing tbe glass panes with putty & brad. Glass to be 0.64 kg. (21 oz) Fittings With necessary screws to be supplied departmentally.Si no-470(a) Ch-9

Fixing Panes of glass with equal or equivalent I.S.I marked quality putty. brads and springs and including supply of all materials and labour etc complete.( But 3.8 to 4.7 mm thick). Sl No.-812(b). Ch-20.

Mild steel or iron work in havy sizes such as trusses; builts up gates, door frames, record racks roof work, glltes etc. wrought to required form including drilling holes; rivetting or welding where necessary, and also including supply of steel, bolts, nuts etc.& their fixing required for proper completion of the work. SI. No. 503 Ch.-10.

Painting or Varnishing on iron works in small areas or new wood work with two coat of ready mixed priming paint & one coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should confirm to the I.S.I.No. 103 1950

Collection, laying and consolidation of stone dust including supply of all material, labour T&P etc reqd for proper completion of the work.(below cc road)

Cement concrete in 1:2:4 ratio cement, sand and 20mm gauge stone grit with supply of all materials, labour and T&P etc. Sl.No.

P/F of Submersible pump I/C supply of approved quality Motor of 2 HP I.S.I mark and boaring Casing Dia of 125 mm with Starter panel, cable and necessarily all fittings comp with labour T&P etc required for proper completion of work as per direction of Engineer E/I . SOR 2014

Supply & Fixing cemented I shap Chair.

Supply and installing of low density polyethylene seamless one peace moulded tank and placing the same in proper position including all taxes labour and T&P etc for proper completion of the work. Tank should be ISI marked (for 500 Liters) As per SOR SI No-New item-1, Ch-19.

Supply & fixing the moduler fiber animal dustbins for park.

Providing and fixing first quality white glazed Orissa pattern WC pan Hindustan, Cere make. earthen ware ISI marked WC pan size580 mm (Hindustan, Ceta make) with 10 cm HCI "P" trap of approved make including supply of all materials, labour, T&P etc. required for proper completion of work cutting and making good floors where required with cement sand and grit. The seat and trap shall have to be fixed over minimum 3" thick cc in proportion of 12:6:1 including supply of all materials labour, T&P etc. complete. SI. No. 2&23.111(B) Ch-22.

Supply and fixing 10 liters PVC low level flushing cistern ISI marked with fittings & brackets, 40 mm dia, CP flush pipe with fittings & clamp 20 mm dia overflow pipe with specials and mosquito proof couplings of approved municipal design, 15mm dia brass stop cock (400 gms) plastic connection (1.5"x1") with brass unions including supply of all materials, labour, T&P etc. required for proper completion of work and painting of cistern and fittings with approved paint, cutting and making good the walls and floors where required with cement sand and grit and including water proofing materials as ordered by the Engineer-in-charge. As per SOR SI No-31(xxiii), 6 and 23.115

Providing and fixing 600mm x 450mm beveled edge mirror of Atul, Kiron make glass with Indian polish 6.50mm thick complete with back of 600mm x 450mm x 6mm hard board sheet fixed to wooden cleats with CP brass screws and washers including supply of all materials, labour, T&P etc. required for proper completion of work. SI No-22

Providing and fixing 550x400 mm wash hand basin white glazed earthen ware 1st quality ISI marked ( Hindustan, Neyeer, Ceramake ) with R.S. or C.I. brackets painted white , 15 mm dia C.P. brass pillar cock (wt. not less than 400 gms) including S/o all material labour T&P etc. fittings used should be of superior quality.(As per item no. 12+23.125)

S/F C.P. brass stop cock/ half turn heavy quality 15mm dia ISI marked including cutting and threading as required S/o all material labour T&P etc. complate.stop cock of 350 gms(As per item no. 245)

Supply and fixing brass bib cock heavy quality 15 mm dia (400 gms) ISI marked including supply of all materials, labour and T&P etc. required for proper completion of work.Si no 239

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes-75 mm diameter.DSR no - 12.41.1

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes-110 mm diameter.DSR no - 12.41.2

Providing and fixing PVC bend 100 mm heavy quality of required degree with access door incretion rubber washer, bolts, nuts complete including supply of all materials, labour T&P etc. required for proper completion of the work

Providing and fixing 750mm x 10mm size C.P brass towel rail of approved quality (including brackets0 with a pair of C.P brass brackets fixed on the wall on wodden cleats with C.P brass screws including supply of all material , labour T &p also including cutting threading the pipe required for proper completion of work SI no -334

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and A.K. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : (One urinal basin with 5 litre white P.V.C. automatic flushing cistern ).DSR no -17.4.1

Providing and fixing A.K. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 : (15 mm nominal bore.) DSR no -18.53.1

Providing and fixing 32 mm dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.External work DSR no - 18.9.4

Providing and fixing 25 mm dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work DSR no - 18.9.3

Providing and fixing 20 mm dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.DSR no - 18.8.2

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3-wheeled steel / vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening / binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density. (G-3 22.4-53mm)

80mm Interlocking C.C. block laid in stone dust base & fill joint with 2.36 mm stone dust at joint filled with S/D after leveling & dressing base including supply of all material labour and tools and plants etc. required for proper completion of the work. SI No CP 14 New Item 3

For Teen shed and Godown-

Electrification work

Add 18% GST

Please Enable Macros to View BoQ information