REPAIR / MAINT TO ROOFING, FLOORING, CEILING, JOINERY AND CONNECTED WORKS FOR CERTAIN MD/OTM ACCN AT NOWGONG MIL STN UNDER AGE B/R I AT GE JHANSI

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and directed

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and directed.

M&L 25 mm thick PCC 1:2:4 type B0 (using 12.50 mm graded stone aggregates) for leveling course etc. complete all a specified and directed.

M & L for non skid ceramic coloured tiles of size exc 0.18 sqm but not exc 0.38 sqm and 7 to 8 mm thick (square / rectangular) as in flooring etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed/ bedding layer in CM (1:6) complete all as specified and as directed.

M/L for non skid ceramic coloured tiles of size exc 0.11 sqm but not exc 0.18 sqm and 7 to 8 mm thick (square / rectangular) as in flooring etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed/ bedding layer in CM (1:6) complete all as specified and as directed.

M&L for glazed ceramic coloured tiles in vertical surface of size 450 X 300 x 7 mm thick, jointless type, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with and including 10 mm thick rendering in CM (1:4) for receiving the tiles, complete all as directed.

M&L 75 mm thick cement concrete type C-2 1:3:6 (using 40 mm graded stone aggregates) as in plinth protection and path laid in panels, not more than 3.0 mtr in length, laid to slope 1:30 incl forming joints 10mm wide and duly filled with mastic bitumen (01 part bitumen mixed with 03 parts of sand) surface, complete all as specified and as directed. Note : The quoted rates are deemed to be inclusive of material against form work and joint fillings.

Dismantling of wall / ceiling boards (fiber, pulp, insulation etc) / insulation boards /slabs/blankets of any thickness including cover fillets ridges etc, complete all as specified and directed.

M&L 4mm th Non asbestos fibre cement building boards fixed or laid/ inserted to GI framework with screws with and including Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, duly fixed in ceiling frame work, complete all as specified and directed.

Dismantling Asbestos Cement Corrugated or Semicorrugate in Roof covering, complete all as specified and directed.

Dismantling timber scantling 40.0 sqcm and over in section in any position as in framed / unframed works such as roof purlins, rafters, fillets, ridges etc as in roof/ ceiling, complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description, complete all as specified and directed.

S&F of pre-painted 0.50mm thick Gavalume Aluminium Zinc coating GI based corrugated / semi corrugated / trapezoidal steel sheet of any colour having tensile strength 550 MPa and AZ 150 grade as in roof covering/cladding to walls, fixed with self tapping screws, complete all as specified and directed.

S&F pre-painted Galvalume Aluminium Zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength 550 MPa and AZ 150 grade as in ridge of roof covering, fixed with self tapping screws, complete all as specified and directed.

M&L for 6mm thick non asbestos cement, corrugated or semi-corrugated sheets fixed with L-type or J-type hooks or cranked hook bolts in roofs, walls etc, complete all as specified and directed.

M&L for 6mm thick non asbestos cement, one piece plain angular ridge or two piece adjustable plain wing ridge orrugated or semi-corrugated sheets fixed with L-type or J-type hooks or cranked hook bolts in roofs, walls etc, complete all as specified and directed.

M&L for structural steel Fe-410-W(Gde-E-250) quality B for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, complete all as specified and directed.

S&F of 40x 5 mm thick mild steel flat iron as in wind tie for roof including securing bolts confirming to Fe 410-W (Gde-E-250) quality-A, complete all as specified and directed.

M&L for preparation of newly steel or iron surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

Demolition of brick work built in cement mortar or lime mortar including all quoins arches, pillars etc complete all as specified and directed.

M&L for brick work with fly ash lime bricks (FALB) conforming to IS 12894, old size brick, straight or curved on plan exc 6m mean radius built in cm (1:6), complete all as specified and directed.

M&L for half brick thick wall with fly ash lime bricks (FALB) conforming to IS 12894, old size brick, straight or curved on plan exc. 6 M mean radius built in cement mortar 1:4, complete all as specified and directed.

Dismantling existing water tanks, (or lowering if required) of exc. 250 litres & not exc. 500 litres capacity of tanks, complete all as specified and directed.

Dismantling existing water tanks, (or lowering if required) of exc. 500 litres & not exc. 1000 litres capacity of tanks, complete all as specified and directed.

S&F of rotational moulded polyethylene cylindrical vertical with closed top water storage tank triple layered WHITE COLOUR 500 Ltr capacity with connecting nipple, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection, with and incl disconnecting and dismantling the existing un-serviceable PVC/RCC water tank on top of roof/slab of bldgs, complete all as specified and directed.

S&F of rotational moulded polyethylene cylindrical vertical with closed top water storage tank triple layered WHITE COLOUR 1000 Ltr capacity with connecting nipple, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection, with and incl disconnecting and dismantling the existing un-serviceable PVC/RCC water tank on top of roof/slab of bldgs, complete all as specified and directed.

S&F in replacement of 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as directed.

S&F of 3 mm thick sheet figured glass pin headed type, not exc 0.50 sqm in each pane, duly fixed with oil putty or wooden beading as required, complete all as directed.

S&F of 3 mm thick sheet glass ordinary quality and glazing type, not exc 0.50 sqm in each pane, duly fixed with oil putty or wooden beading as required, complete all as directed.

S&F in replacement of stainless steel wire cloth 0.36 mm in nominal dia of wire average width of aperture 1.40 mm and fixed with tinned tacks of stainless steel wire staples to steel shutters or fixed with wooden beads to wooden joinery, complete all as specified and directed.

Taking down chowkhats with shutters (without taking off shutters from the frame) area exc 1.5 sqm but not exceeding 4 sqm each including cutting holes in brick/ stone wall built in cement / lime mortar, embedded portion exc half brick but n.exc one brick for inserting new hold fast and making good the disturbed portion/surfaces, in CM 1:3 complete all as directed.

All as per item here-in-above but not exc 1.5 sqm each

Taking down shutters of any description not exc 01 Sqm each, complete all as specified and directed.

Taking down shutters of any description exceeding 01 Sqm and not exc 02 Sqm each, complete all as specified and directed.

S&F 25mm thick flush shutter for cup board solid core construction with block board core and plywood face panels commercial type on both sides etc with and incl min 5 mm thick wooden beading fixed all around complete all as directed.

S&F 18mm thick prelaminated MDF board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work in any situation as in cup board shelves/shutter or similar work, complete all as specified and directed.

S&F continuous (piano) hinges, mild steel bright finish in electro galvanized width of flat (when open) in 30mm, complete all as specifed and directed

M&L for second class hardwood, plain, solid, straight chowkhats and frame, wrought framed, rebated on the soild, rounded or chamfered, put together with glue, pinned at joints and fixing, complete all as specified and directed.

M&L for 35mm thick second class hard wood glazed & skeleton shutter for doors (fully glazed or gauged) open rebated & prepared to receive glass, gauge etc ( with sash bars) edges of framing plain, chamfered sash bar, or rounded, fitted without & mitred beads for securing glass etc, conforming to IS-1003 Part-I & II; size of members of shutters as specified in SSR Part-I section–8, clause 8.24(a) complete all as specified and directed.

M&L for 30mm thick second class hard wood, glazed and skeleton shutter for window & ventilators, (fully glazed), minimum two panels divided into squares (without sash bars) and prepared to receive glass, gauge etc edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part- I section -8, clause 8.24(a), and fitted to chowkhats, complete all as specified and directed.

M&L for box type steel window with 80x40x1.25 m MS tubular frame with side hung shutters ( double shutter for glass and gauze) without sash bars jointed together with and incl grill using 12 mm square bar @ 10 cm C/C incl box type hinges with steel handle and steel pag stay complete glazing bars doweled and welded complete all as specified as directed. Note:- (a) The Glass / gauze shell be measured and paid separately. (b) Side hung Z-Section shutter shall be of size 20mm x 20mm x 25mm and 0.3mm thick.

M&L for box type steel ventilator with 80x40x1.25mm MS tubular frame partly gauged with top hung shutter with and incl grill using 12mm square bars @ 10Cm C/C incl box type hinges with steel handle and steel pag stay complete glazing bars dovetailed and welded complete all as specified as directed. Note:- (a) The Glass / gauze shell be measured and paid separately. (b) Top hung Z-Section shutter shall be of size 20mm x 20mm x 25mm and 0.3mm thick.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F of Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood coloured PVC sheet and edges, reinforced with MS square tube, as specified in SSR Part-II 2020 (Section 8), complete all as directed.

S&F of 100mm butt hinges medium weight cold rolled mild steel ISI marked and fixed with mild steel wood screws or welded to angle frame, complete all as specified and directed.

S&F of 100 mm size butt hinges, extruded aluminum alloy with galvanized mild steel pin type B-21 anodized complete all specified and directed

S&F of 75mm butt hinges medium weight cold rolled mild steel ISI marked and fixed with mild steel wood screws or welded to angle frame, complete all as specified and directed.

S&F of 200 mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed with screws, complete all as specified and directed.

S&F of 150mm long mild steel pressed handles, oval type, stove enamelled black and fixed with screws, complete all as specified and directed.

S&F of 200mm long mild steel, sliding door bolt plate type, stove enamelled black, with bright bolt not less than 12mm dia with and incl minimum of 6 bolts and nuts, complete all as specified and directed.

S&F of aluminium alloy anodized sliding door bolt 200mm length with hasp staple and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all specified and directed.

S&F of 150mm long barrel tower bolt aluminum anodized extruded section fixed with cadmium plated screws complete all as specified and directed.

S&F of 100mm long barrel tower bolt aluminum anodized extruded section fixed with cadmium plated screws complete all as specified and directed.

S&F of 150mm aluminum handle cast type anodized complete all specified and directed.

S&F of 100mm aluminum handle cast type anodized complete all specified and directed.

S&F of mild steel ordinary rat tail rod pattern springs of size 300mm including roller and roller plate complete all as specified and directed

S&F of 140 mm door stopper of aluminium body and tongue anodized with hard drawn steel spring fixed in floor complete all as specified and directed.

M&L for stainless steel curtain rod 25mm dia steel pipe cutting into length as required at site with and incl SS end caps/lobs and SS wall mounting brackets, complete all as specified and directed.

M&L for mild steel hold fast and similar small articles conforming to Fe-290 Gde-165, complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-1 (using 20 mm graded aggregate) for bed block for fixing of chowkhats, complete all as specified.

M&L for preparing old painted steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparing old or previously treated surfaces of wood or wood based materials of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint to match the existing surfaces, complete all as specified and directed.

M&L for preparing new or previously untreated surfaces of wood or wood based materials of any description not otherwise described exc 10 cm width or girth and applying two coat of synthetic enamel paint on a coat of primer and layer of putty/filling material to get smooth & level finish, complete all as specified and directed.

S&F powder coated aluminium slinding window with three track outer frame suitable for sliding aluminium shutters, weight of aluminium setion not less than 0.55Kg/M of three track frame, including necessary joining cleats glazing clips rubber packing Powder coated aluminium shop beading screws with two shutter Including 5mm thick coloured glass and one shutter with stainless steel wire mesh including necessary locking arrangement , handle, aluminium grill of aperature size 50mm and 4mm dia etc complete all as specified.

M&L for powder coated aluminium frame for doors, windows, ventilators with one or more rebates, fabricated out of powder coated aluminium hallow square or rectangular section of required size incl necessary joining cleats, fixing screws etc complete, having size of frame for doors 100mm x45mm x 3.18 mm thick; for window 104mm x 45mm x 3mm thick; for ventilators 59mm x 33mm x 2.5mm, complete all as specified and directed.

M&L for powder coated aluminium door shutters, aluminium section for top rail and styles 85mm x 45mm x 2.0mm thick; bottom rail 100mm x 45mm x 2mm thick and lock rail 100mm x 45mmx 2.0mm thick incl necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, powder coated aluminum hinges, powder coated aluminum snap beading, screws etc, complete all as specified and directed.

M&L for double action floor spring, hydraulically regulated, made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed.

Taking down cement plaster on brick or stone wall including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15 mm thick rendering in CM (1:4) on fair/other than fair faces of brick work finished even and fair complete all as specified and directed.

M&L for 15 mm thick rendering in CM (1:6) on fair/other than fair faces of brick work finished even and fair complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of concrete surfaces in ceilings in cement mortar 1:4, finished even and smooth without using extra cement complete all as directed.

M&L for preparation of new plastered surface and applying two coat of cement based paint over and incl one coat of exterior grade cement based primer, complete all as specified and directed.

M&L for preparation of new plastered surface and applying two coats of oil bound distemper, over and incl a layer of wall care putty to get even and smooth level finish on new plastered surface of internal wall, complete all as specified and as directed.

M&L for preparation of new plastered surface and applying two coats of oil bound distemper, over and incl a layer of wall care putty to get even and smooth level finish on new plastered surface of ceiling, complete all as specified and as directed.

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in any type of soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil complete all as specified and directed.

Removing Excavated soils not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed.

Demolition and breaking up 100mm drain pipes (Salt glazed stone ware, AC or reinforced cement concrete) set in cement mortar including concrete bed complete all as specified and directed

Demolition and breaking up 150mm drain pipes (Salt glazed stone ware, AC or reinforced cement concrete) set in cement mortar including concrete bed complete all as specified and directed

M&L for laying and testing of 100 mm dia SGSW (Salt glazed stoneware) drain pipe grade ‘A’ (ISI Marked)laid in trenches to level /gradient, jointed in CM 1:1 complete all as specified.

M&L for laying and testing of 150 mm dia SGSW (Salt glazed stoneware) drain pipe grade ‘A’ (ISI Marked)laid in trenches to level /gradient, jointed in CM 1:1 complete all as specified.

M&L for 1:3:6 type C-2 concrete bed to drain pipe including packing under and haunching against the side of pipe after they are laid and tested of 100mm bore complete all as specifed and directed.

M&L for 1:3:6 type C-2 concrete bed to drain pipe including packing under and haunching against the side of pipe after they are laid and tested of 150mm bore complete all as specifed and directed.

S&F in repais Vitreous China wash down water closet pan(pedestal pattern), EWC, colored incl jet system & matching colored seat cover fixed complete all as specified

Cutting into existing manholes 100mm dia, bricks wall for connecting new drain pipe/bend/Tee of following sizes and making good to pipe or wall leak proof and rendering cutting out existing benching for and forming branch channels (1/2 round or ¾ section) manholes and filling cut of walls by cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate smooth finish and reforming benching as required complete all as directed by Engineer-in-Charge.

Cutting into existing manholes150mm dia, bricks wall for connecting new drain pipe/bend/Tee of following sizes and making good to pipe or wall leak proof and rendering cutting out existing benching for and forming branch channels (1/2 round or ¾ section) manholes and filling cut of walls by cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate smooth finish and reforming benching as required complete all as directed by Engineer-in-Charge.

S&F in replacement vitreous china squatting pan of Orissa pattern size 580 X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including provision of concrete bedding complete all as specified and directed.

S&F in repair vitreous china wash down water closet (pedestal pattern) white (excluding flushing cistern and flush pipe) and P or S trap including connection to drain (or outgoing pipe) and to flushing pipe anti-syphonage pipe etc including plastic water closet seat, black closed pattern with flat bottom and cover and mild steel chromium plate or aluminised hinging device complete all as specified and directed

M&L for PCC 1:4:8 type D2 using 40mm graded stone agg as in foundation filling and mass concrete complete all as specified and directed

M&L for brick work with sub class 'B' bricks in one bricks thick honey comb built in cement mortar 1:4. complete all as specified and directed

Attending day to day complaints of Cleaning of all blockage of any type of sewage line i.e. branch sewer line, main sewer line etc, manholes of any size and depth, in any situation by way of cleaning/desludging by manually or mechanically or by way of any other suitable means including foreign materials as well as rodding (full through) of sewer lines and between the blocked manholes where required and ordered by Engineer-in-charge and keeping the sewage line all time functional ,cleaning traps, water closet, soil waste/vent pipe, gully traps etc complete upto final drop into septic tanks and soakage well (working in foul condition with taking precautionary measures with necessary equipment as required or applicable by deploying 05 Nos of safaiwala for 08 hrs working complete all as directed by Engr-in-Charge . The sludge removed from the manholes and sewage line shall be removed to out side MoD land complete all as directed by Engr-in-Charge in entire Nowgong Cantt (entire OTM and entire Married accn) area under AGE B/R-I Jhansi. Note:- Each Job shall contain various complaints of sewage received by the office each day.

Note for item No. 92.00

The cost of items like nails screws, hexa blades, washers, plugs, cement, gasket, lead, jute, packing material, bamboo sticks, adhesive etc is deemed to be inclusive in quoted rates only.

The cost of transportation (to and from) and other necessary T & P, flexible rods, wires, bamboo sticks and other necessary equipment and safety gear shall be arranged / brought by contractor to complete the job and no extra cost shall be paid to the contractor in this effect.

All the complaint(s) will be addressed and rectified within 04 hrs from the time of receipt of complaint. If, contractor or his tradesman fails to attend and rectify the complained within 04 hrs from the time of receipt of complaint, the compensation / penalty of Rs 50.00 (Rupees fifty only) per complaint per hr for 04 hrs and after that Rs 100.00 (Rupees one hundred only) per complaint per hr shall be recovered from the contractor's due(s)/payments.

Any labourers/workmen, at any point of the time during the course of execution of work, will not be allowed to mannual handling of sewage containing human excreta (i.e. night soil and sludge/sewage containing night soil) at any cost. All the sludge/mud, containing human night soil, from manholes, gutters shall be removed by mechanical means by deploying required machinery as and when required.The cost in this effect is deemed to be inclusive in the quoted rates only.

The labourer(s) should be free from habits of any addiction such as liquor,smoking or other drugs.

In case, aditional manpower other than mentioned here-in-above, will be required for to attend day to day sewer complaint and smooth functioning of sewage system, the contractor shall be solely responsible for providing the same without any extra cost and no extra payment will be made in this affect at any stage.

The contractor will submit the name of all the deployed tradesman / workers along with their qualification, AADHAR CARD, police verification and other necessary documents as mentioned in PS within Ten (10) days from the date of commencement of work. If, contractor fails to submit complete documents, a penal recovery of Rs 500.00 (Five hundered only) per day will be recovered from the Contractors dues from date of commencement of work.

Daily log sheets in proper format, attendance register, and other stationery items, as required, for all installations will be provided by the contractor and the cost of the same is deemed to be included in the quoted rates only. In case Contractor fails to maintain the said documentation, a penal recovery @ Rs. 50.00 per shift shall be recovered from the Contractors dues

The operator/duty staff shall be provided with proper uniform and shoes by the contractor as decided by the Engineer-in-Charge and operator shall wear them while on duty. The cost of this provision is deemed to be included in the quoted rate. In case operator do not maintain uniform on duty, a penal recovery @ Rs. 50.00 per operator per shift shall be recovered from contractor’s dues.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed

Taking up or down 20 mm bore steel tubing and connections, including cleaning for fixing or removal to store complete all as specified and directed

S & F 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed

S & F 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed

S & F in repairs 15 mm bore Bib taps, fancy type cast copper alloy,chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed

S & F in repairs 15 mm bore Bib taps long body fancy type cast copper alloy,chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed

S & F in repairs 15 mm bore stop/angle cock fancy type,chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed

S & F in repairs 15 mm bore concealed stop cock fancy type,chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed

S&F in repair Vitreous China wash basin, white, flat back, size 580x450mm excluding taps, waste chain and plug and porcelain stopper but including brackets, CP waste coupling,including PTMT PVC connection 600mm complete all as specified and directed complete all as specified and directed

Supply and Fix in repairs 10 Litres, PVC, valve less, syphonic action type, Flushing Cistern, high level, white inlet, ball valve, float, chain and pull, and brackets including PTMT PVC connection 600mm long complete all as specified and directed

M&L for cleaning/desludging of existing septic tank/sokage well of any capacity and depth with inlet/outlet chambers including taking out sludge (both organic and inorganic matter) in any form and other foreign matter etc viz sediment, sand, ash, grease, fibre, silt, roots or vegetation etc by means of sewage sucking machine and after plugging the incoming sewer line through combined high pressure water jetting/ suction (Vacuum) type machine mounted on LCV/HCV facility of high pressure vacuum and removing the sludge outside MOD land by any means and at a place meant for the purpose by local Municipality complete all as specified and directed. NOTE:- For measurement purpose, Liquid depth of septic tank shall be measured before removal of sludge.

M & L for puncturing existing SGSW/RCC pipe line of any dia at any places between manholes for cleaning blockage in pipes including necessary excavation, returning filling in and removal of soil and making good punctured area with CM (1:1) complete all as specified & directed

S&F 100mm bore cast iron (sand cast) soil waste and vent pipe (ISI Marked)in any length with or without ears with cement joint laid in trenches including taking out of existing pipes all as specified and directed.

S&F 100 mm bore CI bends (any radius) diminishing pieces or tapers (large bore measured) fixed in cement joints complete all as specified and directed including taking out existing AC/cast iron bends.

S&F 75mm bore cast iron (sand cast) soil waste and vent pipe (ISI Marked)in any length with or without ears with cement joint laid in trenches including taking out of existing pipes all as specified and directed.

S&F 75mm bore CI bends (any radius) diminishing pieces or tapers (large bore measured) fixed in cement joints complete all as specified and directed including taking out existing AC/cast iron bends.

S&F 100mm dia cast iron branch pieces single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches with cement joint in 1:1 complete all as specified and directed.

All as per item No-109 above herein before but 75mm bore

S&F in replacement PVC (SWR) multi floor trap 100mm dia of outlet with grating including jointing to waste pipe with solvent cement complete all as specified and directed.

M&L for precast cement concrete (1: 2: 4) type B-1 using 20 mm graded stone aggregate as in drain/manhole covers, with plain fair faces including chamfers, weathering throttling etc and set in cement mortar (1:4) complete with joint to match including necessary form works complete all as specified and directed.

M & L Mild steel deformed (TMT) 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed

All as per serial item No-113 above herein before but MS deformed (TMT) 6 to 8 mm dia.

S&F in repair of CP Handshower (health faucet) with 8mm dia complete all as specified and directed 0.9 mtr long flexible tube & wall hook, made of cast copper alloy, complete all as specified

S&F in repair grating square 150mm size of PTMT (Min weight 100 gms)

S&F in replacement of PVC connection 450 x 15mm dia PTMT (PVC), complete all as directed.

S&F in repair of Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified and directed . (Minimumweight 15mm-142gms/20mm-210gms./25mm-455gms/ 40mm- 690 gms)

M&L for factory made PU coated, chequered cement concrete tiles of any colour 30 cm x 30cm x 20 to 22 mm thick, set & jointed and pointed in neat cement slurry mixed with grey cement and pigments, laid over and including 15mm thick screed bed or bedding layer in CM 1:6, complete all as directed.

M&L for factory made PU coated, machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with coloured pigment, made of PU moulded (or rubber mould) with vibrating system laid over 50 mm thick sand cushion, with and incl CM (1:3) in edges of pavers, complete all as specified and directed. Note : The cost of sand cushion is included in quoted rate

M & L for cement concrete type C2, 1:3:6 (40 mm graded stone aggregate) as in surface channels and drains complete all as specified and directed

M&L PCC 1:2:4 type B-0 (using 12.50 mm graded stone aggregate) as in Benching, Coping cills, steps; plinth courses, string courses, etc.complete all as specified.

M&L for preparation of new plastered surface and applying three coats of white wash (lime) on new plastered surface of walls, complete all as specified and as directed.

Excavation in post hole (similar hole) each not exceeding 0.5 Cum getting out, returning filling and ramming, complete all as specified and directed.

M&L for mild steel angle and flat Iron for gate, posts and struts and straining bars in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 complete all as specifide and directed.

Dismantling fencing wire of any type complete all as specified and directed

M&L for chain link fencing, of size 50 x 50mm and (overall dia of wire 4mm), fixed to any type of standards, rails, straining bolts etc, including provision of binding wire, complete all as specified and directed.

M&L for galvanised iron, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75.0 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), complete all as specified and directed.

M&L for 10 mm thick rendering in CM (1:4) on other than fair fair faces of brick work or concrete surfaces finished even and smoth without using extre cement.

Supply only liquid waterproofing compound complete all as specified and directed

Preparing old plastered surfaces of wall, washing rubbing down and applying two coats of oil bound distemper over 1mm thick putty and a coat of chalk whitening primer preparing to make the surface to be plain and smooth before primer complete all as specified and directed.

Preparing old plastered surfaces of wall, washing rubbing down and applying one coat of oil bound distemper and a coat of chalk whitening primer preparing to make the surface to be plain and smooth before primer complete all as specified and directed.

M&L for preperation of new plastered surface and applying three coats of white wash on newly plastered surfaces of wall, complete all as directed.

All as specified in item No 134 above but applying one coat of distemper oil bound white or any tinted on ceiling complete all as specified and directed.

M&L for preparation of existing surfaces of wall and applying a coat of cement base paint complete all as specified and directed.

M&L for preparation of existing surface and applying two coats of cement base paint over a coat of cement base primer complete all as specified and directed

M&L for preparing old concrete/plastered surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

AGRASEN ENTERPRISES

S GOURAV PRAKASH ENTERPRISES

Shri Tirupati Associates

Soni Traders

M/S PRATEESH SAHARIYA

M/s JS Constructions

M/S AVANI TRADERS

Yashoghan Construction

ARTISTIC BUILD CO

M/S Nextage Construction

M/S NASIM AND CO.

HARNAM SINGH ANIL SINGH

Ayush Enterprises

M/S ADITYA ENTERPRISES