Construction of Anganwadi Budiling at Uppiliyakkudi near Ayyanarkoil in Uppiliyakkudi Panchayat

Amount

Construction of Anganwadi Building @ Uppiliyakkudi near Ayyanarkoil in Uppiliyakkudi Panchayat

Earth work excavation and depositing on bank with in initial lead of 10 m and initial lift of 2m in hard stiff clay, stiff black cotton soil, hard red earth,earth mixed with small sized boulders and hard gravelly soil as per SS 20B

Collection and supply of M.Sand and filling in to the basement including cost and conveyance to the site and all labour charges for filling as per standard speecifications

Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete for 10 cum.

Filling with Conveyed Earth including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete for 10 cum.

Reinforced Cement concrete 1:1.5:3 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete for 10 cum.

Supplying and erecting centering shuttering including necessary supports for plane surface in foundation and basement and in all floors for R C C column footing supported by casurina props of 10cm to 13cm dia spaced at 75cm centre to centrecolumn plinth beam, beams, roof slabs, staircase steps, bed blocks, critical pier etc using mild steel sheets of size 90 x 60 cm and 10 guage stiffened, welded with mild steel angles of size 25mmx25mmx3mm for boarding laid over silver oak (country wood) scantlings of size 10cm x 6.5cm spaced of about 90cm centre to centre and complete complying with standard specifications and as directed by departmental officers including conveyance of all materials to site and proper centering etc complete.

Supplying and fabrication of steel including cost and conveyance of steel to site and all labour charges for straightening, cutting to length,bending to shape and tying in position and forming grills for all R.C.C works

Brick work in cement mortar 1:5 mix using country bricks 83/4"x43/8"x23/4"and conveyance of all materials to site and all labour charges etc complete -10 cum

Manufacturing Supplying and fixing of Steel Door with the following Specification MS angles of size 40x40x6mm are used for the outer frames and M.S.Angles of size 35x35x6mm for the shutter frames stiffeners with 32x6mm M.S.flat is provided at required intervals in the shuuter frame including cost and conveyence of all materials to site and all labour charges etc complete -10 sq.m

Door D (0.90m x 2.10m)

Door D (0.90m x 1.50m)

Supplying anf fixing in Position of Steel Sheeted window (Two Leaves) with the following specifications, Outer frames of windows made of 'Z' section F7D of size 33x25x3mm at 1.419kg/m and mullion 'J' Section including cost and conveyence of all materials to site and all labour charges etc complete -10 sq.m

Supplying anf fixing in Position of 'N' type Ventilators using M.S.Angle of size 25x25x5mm for frame and M.S. Flat of size 20 x 3mm for fixing the weld mesh and using 25 x 22x3mm 'T' Section for frame glass including cost and conveyence of all materials to site and all labour charges etc complete -10 sq.m

Supply and fixing of Cuddapah Slab including cost and conveyance of all materials to worksite and all labour charges etc., complete

Plastering with cement mortar 1:3 mix to 10 mm thick including cost and conveyance of all materials to site and all labour charges etc complete -10 sq.m

Plastering with cement mortar 1:5 mix to 12 mm thick including cost and conveyance of all materials to site and all labour charges etc complete -10 sq.m

Providing Granolithic Pattern Floor finish with plain cement concrete 1:2:4 using 10-12 mm ISS HBG metal and top rubbed smooth etc., complete complying with standard specification as directed.

Paving the Floor with scratch proof ceramic tiles of size 305x305x6mmincluding cost and conveyance of all materials to site and all labour charges etc complete

Dadooing of walls with colour glazed tiles of size 300x200x6 mm of best quality including cost and conveyance of all materials to site and all labour charges etc complete

Weathering course with brick jelly lime concrete using 20mm brick jelly with pure slacked lime over R.C.C. roof slab in the proportion of 32:12.5 and finshed with one course of pressed tiles of size 23x23x2cm with cement mortar 1:3 mix and pointed with the same oiled mortar including cost and conveyance of all materials to site and all labour charges etc complete for 10 Sqm

White washing 2 coats with shell lime including cost and conveyance of all labour charges etc., complete.

Distembering two coats with best approved colour with Priming Coat over the new plastered surface including cost and conveyance of all materials to site and all other labour charges etc complete.For INNER WALL

Painting two coats of newly plastered wall surface with ready mixed Plastic Emulsion Paint of First quality of approved colour over a Priming Coat including thorough scrapping , clean removal of dirt and including necessary plaster of paris putty wherever required etc, complete complying with standard specification(including primer).For OUTER WALL Surface.

Painting two coats over new iron works using ready mixed enamel paint including cost and conveyance of paint and all labour charges etc complete

Supply and run of 2 of 6 Sq.mm (84/0.30) polythene insulated PVC sheathed heavy duty SC Copper conductor of 1100 V grade on 7/20 GI bearer wire for service connection mains (SD No.64)

Supply and run of 2x4 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains. (SD 69)

Supply and fixing of 4'-18W LED with fitting including all cost and conveyance to worksite etc., complete

Wiring 2 x 1.5 sq.mm (22/0.30)PVC insulated unsheathed SC.cu.conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with in flush with wall covered with hylem sheet of 3 mm thick with painting of suitable colour for concealed PVC light/ fan point (SD No.25)

Light Point

Fan Point

Wiring 2 x 1.5 sq.mm (22/0.30)PVC insulated unsheathed SC.cu. conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with in flush with wall covered with hylem sheet of 3 mm thick with painting of suitable colour for concealed PVC plug point (SD No.38) 5 pin plug point

supply and fixing of 1200mm sweep AC ceiling fan complete with stepped electronic regulator with 300mm down rod on the existing clamp SD 106

Supply and fixing of TNEB meter Board suitable for 32A Single Phase service connection with 32A Fuse unit (500V) 32A neutral link and earth link (1" x 1/8" Copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit. (SD No. 125)

Supplying & Fixing in position of European Water closet of approved quality etc., complete

Supplying & Fixing in position of Indian type Water closet for Baby PAN of approved quality etc., complete

Supplying & Fixing in 110mm dia PVC Pipe 6 Kg per CM2 for Stonewere etc., complete

Supplying & Fixing in 500 Lr Capacity HDPE Tank etc., complete

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

M.RAMANATHAN (BID ID -1126517)