PROVN OF AC POINTS AND ALLIED WORKS IN MD ACCN AT AF STN MANAURI

Amount

Demolition of Brick works masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and pre-cast concrete articles complete all as specified and directed by the Engineer-in-Charge.

M & L for brick work with subclass “B” Old size bricks, straight or curved on plan exceeding 6 m mean radius built in CM 1:6 complete all as specified and directed by the Engineer-in-Charge.

M&L for brick work with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed by the Engineer-in-Charge

M & L for rendering 15 mm thick on fair face of brick walls or concrete surface in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified & directed by Engr in Charge.

Dismantling stone slab floor, hearth or wall tilling including cement mortar bedding(but not backing), and rubbish off premises etc complete all as specified and directed by Engr in Charge.

M & L for 18-20 mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including rounding of edges of granite slab complete all as specified and directed. Note:- Colour & design shall be approved by Engr-in-Charge.

M & L for 20 mm thick screed bed or bedding layer in Cement mortar 1 : 6 for laying floor finishes complete all as specified & directed by Engr in Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified & directed by Engr in Charge.

M & L for glazed ceramic coloured tiles (superior quality) 300x450x7-8 mm thick as in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick backing coat in cement mortar 1 : 4 for fixing tiles as dados, skirtings complete all as specified & directed by Engr in Charge.

M & L for coloured Non skid joint free tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed .

M & L for 20 mm thick PVC board made out of 18mm thick PVC ply/board and 1 mm thick PVC ply sheet free form rigid one side prelaminated and other side plain white colour,PVC sheet stuck on both side with solvent adhesives to make the board 20mm thick for kitchen cabinets shutter, top and side portion and one shelf throughout (for holding kitchen items) shall be made with 18mm thick PVC ply/board plain colour and back side portion with 12mm thick PVC ply/ board plain colour fixed with screws as per manufacturers instructions complete,inside depth of cabinet not less than 0.50 metre with and including 02 nos auto closer counter sunk hinges on each shutter, 01 no stainless steel handles 75mm long or more as per site requirement in each shutter,ball catches with 8mm dia steel ball and brass body and stiking plate and 5mm thick plain designer pattern/itched glass (area of glass panes n.exc. 0.30 Sqm in each shutter) including glazing with putty/silicone/beading/ grooving complete as per sample of the cabinet held with AGE(I) office all as specified and as directed by Engineer in charge. Note : (i) Quoted rates shall be deemed to be including fixing of cabinet on wall/RCC shelves with appropriate rawl plug/dash through fasteners including all necessary fittings & fixing arrangements etc.(ii) Colour & design of PVC sheet shall be approved by Engr-in-Charge. (iii) Only front area of cabinet shutter will be measured for payment purpose.

M & L for 20 mm thick PVC board made out of 18mm thick ply and 1 mm thick PVC ply sheet free form rigid one side prelaminated and other side plain white colour,PVC sheet stuck on both side with solvent adhesives to make the board 20mm thick to make frame with shutter below portion of cooking platforms Frame shall be of size 50mmx30mm & of the same material as of shutters with and including 02 nos auto closer counter sunk hinges in each shutter,01 no stainless steel handles 75mm long and more fixed with diamond screws & ball catches with 8mm dia steel ball and brass body and stiking plate complete as per sample of the cabinet held with AGE(I) office all as specified and as directed by Engineer in charge. Note :(i) Quoted rates shall be deemed to be including fixing of frame and shutters including all necessary fittings & fixing arrangements etc.(ii) Colour & design of PVC sheet shall be approved by Engr-in-Charge.

Demolition of cement concrete reinforced (reinforcement cut as required to facilitate demolition), of any description and in any position complete all as specified and as directed by Engineer-in-Charge.

M&L for RCC (1:2:4 ) type B1 (using 20 mm graded aggregate as in shelves, slab, cooking platforms and similar works and the like etc including necessary formwork complete all as specified and directed by the Engineer-in-Charge.

M&L for mild steel deformed TMT bar 10 mm dia and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed by the Engineer-in-Charge.

S&F CP towel rings of dia 150mm and above complete all as specified and as directed by Engineer-in-Charge.

S&F for sub main wiring with two runs of single core PVC FRLSH IS-694 cable with unsheathed multi-stranded copper conductor of size 10 Sqmm and drawing through in concelead rigid non metallic PVC conduit pipe 25mm dia medium grade heavy duty in suitable size with all necessary fittings including one run of FRLSH insulated unsheathed stranded copper conductor cable of size 10 Sqmm as earth wire (green in colour) and connected to common earth dolly complete including taking down of old unserviceable sub main wiring complete all as specified and as directed. Note : (i) Three run of 10 Sqmm with one run of PVC conduit pipe shall be measured against one unit. (ii) Cost of cutting /chasing / plastering /colouring etc at site shall be included in quoted rates for matching to disturbed surface.

S&F for sub main wiring with two runs of single core PVC FRLSH IS-694 cable with unsheathed multi-stranded copper conductor of size 4 Sqmm and drawing through in concelead rigid non metallic PVC conduit pipe 25mm dia medium grade heavy duty in suitable size with all necessary fittings including one run of FRLSH insulated unsheathed stranded copper conductor cable of size 4 Sqmm as earth wire (green in colour) and connected to common earth dolly complete including taking down of old unserviceable sub main wiring complete all as specified and as directed. Note : (i) Three run of 4 Sqmm with one run of PVC conduit pipe shall be measured against one unit. (ii) Cost of cutting /chasing / plastering /colouring etc at site shall be included in quoted rates for matching to disturbed surface.

Supply and fix sheet metal enclosure distribution board TPN, 4 poles ,double door, 4 way with 200 Amps rated bus bar vertcal type with MCCB 4 pole 100 Amps 415 volts thermal magnatic base operated as incomer with neutral link and maufacturer by OEM incl concealed in surface of wall and making all connection using gland , thembles in required size including taking down of old unserviceable DB with accessories complete all as specified and directed Note; Quoted rate shall be included the cost of MCCB , cutting plastering , colouring to surface of wall etc shall be included in quoted rates for matching to disturbed surface.

S&F in replacement of sheet metal enclosure distribution board SPN, single door, 8 way with 200 Amp rated bus bar 230 Volts complete all as specified and as directed.

S&F in replacement of MCCB 415 volt TPN 4 poles 63 Amps,50 Hz, 35/36 KA breaking capacity, thermal based adjustable type complete all as specified and as directed.

S&F in replacement of MCCB 415 volt TPN 4 poles 100 Amps, 50 Hz, 35/36 KA breaking capacity, thermal based adjustable type complete all as specified and as directed.

S&F in replacement of MCB , SPN, 215/220 volts , 40 Amps , "C" Curve 10 KA complete all as specified and as directed.

S&F in replacement of MCB , SP, 220 volts , 10-32 Amps , "C" Curve 10 KA complete all as specified and as directed..

S&F in replacement of earthing complete with galvanized steel earth plate 600 x600 x 6mm thick, buried directly in ground (earth pit not less than 2.25 Mtr deep below ground level) with top edge of the plate not less than 1.5 Mtr below normal ground level, connected to galvanized GI strip 32x6mm as earthing lead by means of bolts, nuts, check nuts & washers of galvanized iron or steel besides building at all joints including excavation and earth work, GI pipe light grade 40 MM bore for protection of GI strip from earth electrode, supply and laying charcoal dust, common salt, PCC (1:2:4) type B-1 using 20 MM graded stone aggregate for chamber and MS angle iron frame 40 x40 x 3 MM and RCC cover 40 MM thick (1:2:4) type B-1 using 20 MM graded stone aggregate Reinforced with 6 MM dia round bars @ 75 MM C/C both ways with MS handle 12 MM dia , PGI funnel and wire mesh , 20 MM bore GI Pipe light grade for watering complete all as shown in electrical plate No 3 of SSR Part-I(2009) and connected to earth test point including testing complete all as specified and directed.

S&F in replacement of earthing complete with galvanized steel earth plate 600 x600 x 6mm thick, buried directly in ground (earth pit not less than 2.25 Mtr deep below ground level) with top edge of the plate not less than 1.5 Mtr below normal ground level, connected to galvanized GI wire 4 MM dia as earthing lead by means of bolts, nuts, check nuts & washers of galvanized iron or steel besides building at all joints including excavation and earth work, GI pipe light grade 40 MM bore for protection of GI strip from earth electrode, supply and laying charcoal dust, common salt, PCC (1:2:4) type B-1 using 20 MM graded stone aggregate for chamber and MS angle iron frame 40 x40 x 3 MM and RCC cover 40 MM thick (1:2:4) type B-1 using 20 MM graded stone aggregate Reinforced with 6 MM dia round bars @ 75 MM C/C both ways with MS handle 12 MM dia , PGI funnel and wire mesh , 20 MM bore GI Pipe light grade for watering complete all as shown in electrical plate No 3 of SSR Part-I(2009) and connected to earth test point including testing complete all as specified and directed.

Supply and laying of XLPE insulated , screened, PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty with aluminium conductor 1100 volts grade cross sectional 95 sq mm 3.5 core ,laid in trenches/ducts /encased in GI pipe /fixed to pole complete all as specified and directed.

Supply and laying of XLPE insulated , screened, PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty with aluminium conductor 1100 volts grade cross sectional 50 sq mm 3.5 core ,laid in trenches/ducts /encased in GI pipe /fixed to pole complete all as specified and directed.

Supply and laying of XLPE insulated , screened, PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty with aluminium conductor 1100 volts grade cross sectional 70 sq mm 3.5 core ,laid in trenches/ducts /encased in GI pipe /fixed to pole complete all as specified and directed. Note for item No 27 to 29 :- Excavation, earth work, sand cushioning, protection cover/GI pipe shall be measured and paid separately under respective item of Schedule 'A'.

Supply & fix single pole and neutral enclosure 4 module in sheet steel with a two pin and earth plug and socket complete with one single pole MCB 25 Amp 10 KA complete all as directed all as directed by Engineer-in-Charge.

Excavation in trenches in soft/loose soil not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth for laying of cables and getting out including trimming of sides complete all as specified and directed by Engineer-in-Charge.

Returning, filling in, including spreading, leveling watering and well ramming in layers not exceeding 25 cms thick each layer complete all as specified and directed by Engineer-in-Charge.

Removal of surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed by Engineer-in-charge.

Material and labour for sand cushioning with a layer dry clean Ganga river of sand 8 cm thick before laying of cable and 15 cm thick after laying of cable in trenches complete all as specified. Note: Punned thickness 18 cm shall only be measured.

Supply and laying old size sub class 'B' bricks laid flat in trenches over the cable with the length of brick perpendicular to the direction of cable length, adjacent/abutting each other for cable protection complete all as specified and directed.

Material & labour for boring in suitable depth to cross the GI pipe size upto 40 mm dia of bore for drawn through XLPE under ground cable for giving mechanical protection to cable complete all as directed.

Supply and laying 40 mm bore galvanized steel tubing "light grade" with all fittings,clamps, bolts, nuts and washers (ISI Marked) and fixing to the pole complete with all fittings, laid in trenches/fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

Supply and laying 80 mm bore galvanized steel tubing "light grade" with all fittings,clamps, bolts, nuts and washers (ISI Marked) and fixing to the pole complete with all fittings, laid in trenches/fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

(i) Incoming : MCCB 4 pole, 100Amp capacity, adjustable type with rupturing capacity 25 KA- 01 No. (ii) Outgoing : MCCB 4 pole, 63Amp capacity, adjustable type with rupturing capacity 25 KA- 02 Nos. (iii) Voltmeter dial type ,6" square size with rottary switch - 01 Nos (iv) Ampermeter, dial type, 6" square size, with rottary switch -01 Nos (v) CT, copper wound suitable rating for RYB, phase - 03 Nos (vi) Aluminium bus bar suitable size and thickness for RYB current rating 200Amp and for neutral 150Amp - 01 set (vii) Indicator lamp plate type for RYB - 03 Nos (viii) All incoming and outgoing connection in MCCB/fitments carried out through suitable rating aluminium strip/lugs

M/S Amar Enterprises (BID ID -3197249)

M/S Garg Sons (BID ID -3197476)

DKS ENGINEERING WORKS (BID ID -3203209)