CERTAIN SPECIAL REPAIR, LBW WORKS AND REVENUE WORKS AT MIRAN SAHIB UNDER GE JAMMU

Amount

B/R Portion: - Dismantling AC corrugated, semi corrugated sheets in roof covering complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc), or insulation boards/slabs/blankets, any thickness any type including cover fillets, complete all as specified and directed.

Dismantling timber scantling 40 Sqcm and over in section in any position as in unframed work complete all as specified and directed.

Dismantling timber scantling as in fillets, rail posts rafters, purlins etc under 40 sq cm in section, in unframed work complete all as specified and directed.

Taking down roof trusses, coupled rafters or trussed beams above 4 metres, above 8 metres and upto 8 metres complete all as specified and directed.

S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 MPs as in roof covering fixed with self tapping screws or L-type or J-type or cranked hook bolts complete all as specified and directed.

S&F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 MPs as in ridge of roof fixed with self tapping screws or L-type or J-type or cranked hook bolts complete all as specified and directed.

S&F 600x600 mm grid frame of galvanised iron powder coated section incl supply and fixing 4 mm thick non asbestos designer E board and comprising of under mentioned section etc for grid frame : - (a) Suspended GI main runner 32x24 mm bulb Tee section fixed with 4mm dia GI bar @ 1200 c/c level shall be adjusted with fly/bionet screws. (b) Placed in position cross Tee 600 mm long and 24x26 mm bulb Tee section @ 605 mm c/c using shape and bionet fixing arrangement to secure main runners. (c) Ceiling GI 26x24 mm size bulb section installed 605 mm long in between cross Tee. (d) GI coated angle 24x24 mm fixed with PVC rawl plugs and GI screws to secure with walls. (e) All the fixing details shown on drg No CEPZ/STD/809/07 dt 03-11-2007 and as per manufacturer instructions as approved by GE.

Taking down Chowkats or frames n.exc 1.5 sq.m each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down Chowkats or frames exc 1.5 sq.m but n.exc 4 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

S&F Aluminium powder coated four track sliding window shutters (two tracks for glazed shutters and two tracks for fly proof shutters). Glazing with 5.5mm thick plain sheet glass and gauging with aluminium wiremesh of dia 0.45mm and aperture 1.40mm with sections of min 2mm thick including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc., complete all as specified and directed.

S&F Aluminium powder coated aluminium door shutters with frame ( frame sections not less than 3mm thick, shutter sections not less than 2mm thick. Bottom half panel filled with 8 mm thick prelaminated particle board and top half portion covered with 5.5mm thick frosted glass including necessary joining cleats, glazing clips, rubber neoparene packing, handles 2 nos in each door, hinges, anodised aluminium snap beading, screws, two way floor door spring, mortise lock with keys etc., complete all as specified and directed.

M&L Steel ventilators with centre hung shutter including two pairs of brass cup pivots, catch spring and pulley wheel, complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

S& F factory made solid panel PVC moulded door shutter with particle board core 28 to 30 mm thick (stiles) with 2, 4 or 6 raised panel design with 2 mm thick moulded prelaminated PVC sheet on front face and 2 mm thick plain color PVC sheet on back face supply and fixing in frame at site as per specification and drawing complete all as specified and directed.

S&F aluminium handles D type anodised 125mm long ISI marked complete all as specified and directed.

S&F 125mm long aluminium anodised barrel tower bolt of extruded section ISI marked complete all as specified and directed.

M&L for preparing surface of new steel surfaces of any description and girth, not otherwise described and treated with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:6 on other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:4 with WPC on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of surface and applying two coat of oil bound distemper over a coat of primer including 1mm thick wall putty complete all as specified and directed.

Demolition of cement concrete of any description and in any position and removing the rubbish from work site complete all as specified and directed.

Dismanting floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed.

M&L for Non skid ceramic colour tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specfied and directed.

M&L light shade vitrified Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shade, pattern, laying etc of tiles complete all as specified and directed.

Description all as per Ser item No 26.00 here-in-before but as in skirting complete all as specified and directed.

M&L for glazed ceramic colour tiles (450 X 350 mm) x 7 mm thick as in dados, skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for rendering 10mm CM 1:4 to receive wall tilling complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Description all as per Ser item No. 30.00 here-in-before but 15mm bore complete all as specified and directed.

S&F 20 mm bore steel tubing, medium grade, galvanised with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

S&F 15 mm bore steel tubing, medium grade, galvanised with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

Dismantling water tanks exc. 250 & n. exc 500 ltr complete all as specified and directed.

S&F 500 Litre capacity Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted and fixed in position complete all as specified and directed.

S&F 20mm dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F 20 mm dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

Description all as per Ser item No. 37.00 here-in-before but 15mm complete all as specified and directed.

S&F Vitreous China wash down water closet pan pedestal pattern white including fixing bolts,including white coloured plastic seat cover, CP brass jet nozzle with 600 long PVC pipe complete all as specified and directed.

S&F vitreous china wash basin, white, flat back, size 550 x 400 mm excluding taps, waste, chain & plug and porcelain stopper but including brackets, waste coupling cutting, waste pipe for and pinning in ends of brackets or erecting stand complete all as specified and directed.

S&F in repair PVC valveless, symphonic action type, flushing cistern, 10 ltrs capacity, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repair low density PVC connections commercial quality 15mm bore with PTMT nuts of length 450mm complete all as specified and directed.

S&F low density PVC waste pipe 32 mm bore for flushing cistern complete all as specified and directed

S&F in repair 15 mm bore bib taps (ISI marked), long nose / long body, cast copper alloy CP fancy type with capstan head handle screwed down, screwed for brass, weight not less than 450 gms ferrule and fixed complete all as specified and directed. Makes: - Jaquar, Kohler, Artize and Cera.

S&F in repair 15 mm bore Angle valves (ISI marked), cast copper alloy CP fancy type, half turn, screwed down, high pressure, with crutch or butterfly handle, weight not less than 450 gms screwed both ends for iron pipe or for unions complete all as specified and directed. Makes: - Jaquar, Kohler, Artize and Cera.

S&F 15mm dia CP pillar tap (ISI marked), cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot or Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed. Makes: - Jaquar, Kohler, Artize and Cera.

S&F Mild steel framed works such as grills, framed guard bars, etc and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

S&F Structural steel works as in roof trusses, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats plate etc confirming to gde Fe 140-S complete all as specified and directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk)forming holes, without any attachment as in gusset plate, base plate etc complete all as specified and directed.

Steel work in tubular post including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade St.-240 complete all as specified and directed.

S&F Mild steel bolts purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal orsquare nut. exc 30cm long (dia of neck exc 12 but n exc 16 mm) complete all as specified and directed.

S&F 75/100 mm Cast iron floor trap with stainless steel grating including jointing to waste pipe fixed in cement concrete B1 (1:2:4) complete all as specified and directed.

S&F stainless steel grating doom 125/100/75 mm dia with hole (Min weight 25 gms) complete all as specified and directed.

S&F brass CP towel rail 20 mm dia 'D' type 60 cm long between flanges complete all as specified and directed.

S&F MS peg set of six power coated as approved by GE complete all as specified and directed.

S&F drapery curtain rod of metalic 20mm dia covered with PVC coating including MS bracket, end ball, rounded block (coated with brown / cherry / golden colour) of approved pattern and shade fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screw complete all as specified and directed.

S&F Glass shelf rectangular size 450mm x 150mm, 5 mm thick glass with stainless steel bracket as per sample kept in AGE B/R office complete all as specified and directed.

Demolition of brick work / stone masonary built in cement mortar including all quoins, arches, pillars, but excluding pre-cast concrete articles complete all as specified and directed.

Brickwork with sub class `B` old size brick straight or curved on plan exc 6 mtr mean radius built in cement Mortar 1:6 complete and all as specified.

Description same as per Srl item No. 60.00 here-in-before but except brick, complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in sub base to receive top layer complete all as specified and directed.

M&L factory made precast machine crafted cement concrete M-40 grade antiskid tiles 300 X 300 X 22 to 25 mm polymer moulded using white cement and pigment laid over and including inclding 15 m thick screed bed in CM 1:6 complete all as specified and directed.

Surface dressing n exc 15 cm deep in hard dense soil complete all as specified and directed.

Surface excavation n exc 30cm deep and averaging 15 cm deep and getting out in soft soil / loose soil complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out in hard / dense soil complete all as specified and directed.

M&L for treating the bottom and sides of exacavation at the rate of 5 litres of emulsions per square metre of surface area complete all as specified and directed.

M& L for treating the top surface of filled area at the rate of 5 litres of emulsions per square metre of surface area complete all as specified and directed.

M&L for treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of perimeter wall complete all as specified and directed.

M&L PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in mass concrete in foundation) complete all as specified and directed.

Brick work with subclass 'B' old size bricks straight or curved on plan exceeding 6 m mean radius built in CM 1:4 as in partition walls complete all as specified and directed.

M&L RCC M-25 design mix (using 20mm graded crushed stone aggregate) Type B-1 as in foundations/ plinth beams complete all as specified and directed.

M&L RCC M-25 design mix (using 20mm graded crushed stone aggregate) Type B-1 as in columns, pillars complete all as specified and directed.

M&L RCC M-25 design mix (using 20mm graded crushed stone aggregate) Type B-1 as in chajjas complete all as specified and directed.

M&L for reinforced cement concrete M-25 design mix, type B-1 (using 20mm graded crushed stone aggregate) as in lintel beams, RCC bends, roof beams supported on walls as for roof slabs, lintel etc complete all as specified and directed.

M&L for reinforced cement concrete M-25 design mix, type B-1, (using 20mm graded crushed stone aggregate) as in slabs & Shelves etc complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

Formwork to sides and soffits of roof beams, tie beams, etc. also splays between floors and beams, etc complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions square/ rectangular complete all as specified and directed.

Formwork to soffits of slabs including supports, overhangings etc, for fair finished surfaces of concrete complete all as specified and directed.

Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed.

Form work to edges of roof slab of thick not exc 20cm wide and as in similar work complete all as specified and directed.

M&L for TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for TMT bars 5 to 8mm dia as in stirrups, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia as in stirrups complete all as specified and directed.

M&L for rendering 5mm thick finished even and smooth without using extra cement in CM 1:3, in ceiling surfaces complete all as specified and directed.

M&L for rendering 10mm thick with WPC @ 3% by weight of cement finished even and smooth without using extra cement in CM 1:4, on roof surfaces complete all as specified and directed.

M/L for preparing plastered surface and applying three coats of white wash on ceiling surfaces complete all as specified and directed.

M/L for preparing new plastered surface and applying two coats of weather coat paint over a coat of same quality primer on wall surfaces complete all as specified and directed.

Returning filling incl spreading, leveling, watering and well ramming in layers n.exc 25 cm in each layers hard / dense soil complete all as specified and directed.

Removing excavated materials in soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.50m above the starting point complete all as specified and directed.

Hardcore of guage of broken boulders exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.

M & L PCC 1:4:8 type D-2 75mm thick (using 40 mm graded crushed stone aggregate) as sub base to floor complete all as directed and as specified.

M&L 2 mm thick PVC sheets, laminated plain coloured, marbled mosaic or mottled finish, laid with approved rubber based adhesive in floors complete all as specified and directed.

M&L PCC 100 mm thick 1:2:4 Type B-1 (using 20 mm graded crushed stone aggregate) finished even and smooth without using extra cement complete all as specified and directed.

Machine cut kota stone slab flooring, steps and risers 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6, for laying floor finishes like tiles complete all as specified and directed.

Machine cut cudappa stone slab 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) in plinth protection laid in alternative bays finished even and smooth without using extra cement including making 10 mm wide grooves to full depth at 3 m interval and at every change of direction and filling the grooves with mixture of bitumen and sand mixed in the ratio of 1:3 by weight and top 10 mm depth sealed with sealing compound grade ‘A’ complete all as specified and directed.

Supply only water proofing compound complete all as specified and directed.

M&L for 18-20mm thick granite machine cut including 10mm thick screed bed CM 1:4 jointed including chamfered / rounded edges as in window cills complete all as specified and as directed by Engineer-in-Charge.

S&F 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing with lamination, including teak wood liping 6mm thick on sides complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in back filling, bed block for hold fast, coping, benching on corner of joints etc complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section ISI marked complete all as specified and directed.

S&F Pressed steel frames (Factory made) made out of 1.25mm thick black MS sheet for doors with two rebates for fixing one shutter including necessary lugs, hinges, lock strike plate etc., complete,size of frame 60 x 40 mm including bottom of each chowkat to be welded with 2 Nos. 25 X 25 X 3mm thick flat iron projecting 10cm on either side complete all as specified and directed.

S&F 100 hasp and staple, safety type aluminium anodised including bolt to hinges plate and fixed with screws complete all as specified and directed. (ISI marked).

M & L for providing water proofing treatement with APP based polymeric membrane minimum weighing 3 kg/ Sqm and minimum 3mm thick reinforced with polyester non wove fabric ( weight not less than 150gm/Sqm) applyied on one coat of oil based bitumen emulsion primer @ 0.3 lit per sqm (OR as per the directions of manufacturer instructions) including cleaning of surface thoroughly from dust, dirt and projections. Laying of membrane by forced (torch) application with 10cm overlaps. A coat of blown bitumen 85/25 @ 1.2 Kg/sqm to be applied on top of memberane, finally coating the surface with bituminous aluminium paint @ 100gm/Sqm complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade including 50mm thick sand cushioning complete all as specified and as directed.

M&L for Cement concrete 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) as in surface channels complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds, mi-tred / stopped ends etc. complete all as specified and directed.

PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate in foundation of manholes complete all as specified and directed.

M & L for brick work with sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius built in cm 1:4 and complete all as specified and directed.

Rendering 15 mm thick on brick work or concrete surface in cm 1:4 and finishing the surface even and smooth with using extra cement complete all as specified and directed.

S&F 150mm internal dia, Salt glazed & stoneware drain pipe grade ‘A’, laid in trenches and jointed with cement joints including concrete bed of 100 mm thick in PCC 1:4:8 Type D-2 (using 40 mm graded crushed stone aggregate) complete all as specified and directed by Engineer -in- charge.

M&L for RCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) in precast manhole cover and cover slab for septic tanks and including necessary forms and moulds etc and set cement mortar 1:6 complete all as specified and directed.

M & L PCC 1:4:8 type D-2 100mm thick (using 40 mm graded crushed stone aggregate) as sub base complete all as specified and directed.

M&L PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in coping for walls, bed blocks etc including necessary form work complete all as specified and directed.

M&L preparing new plastered wall surfaces / pre cast cement concrete, jallis and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

Framed work such as gates etc conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F 4mm dia galvanised steel wire, 150x100mm mesh, made up into mattresses or cages, lapped, wired and laid in position, including closing after filling complete all as specified and directed.

E/M Portion: - Taking down old unsv copper/aluminium point wiring concealed / batten (light, fan, socket or power) complete, including fixture and fittings such as switches,sockets, ceiling roses,bell push,bell electric,lamp holder,bulk head fitting, pendants, regulators, sockets, light fitting and any type switch board wooden/iron,round block etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed.

Taking down old and unserviceable submain wiring any size of two core & incldung earth wire complete including batten/ conduit and make good the disturbed surface to match the existing surface, complete all as specified and as directed by Engr-in-charge.

Taking down old and unserviceable, distribution board any type including, MCBs etc after removing all connection and make good the disturbed surface complete all as specified and as directed by Engr-in-charge.

M&L for point wiring for one light/fan/5 Amps independent socket point/call bell point controlled by one 5 Amp switch with 1.5 Sqmm single core multistranded copper conductor FRLS, PVC insulated (unsheathed) heavy duty cable including continuous earth wire of size 1.5 sqmm copper conductor multistrand FRLS, PVC insulated (unsheathed) drawn into existing concealed PVC rigid/steel conduit and into existing CI/pressed steel terminal boxes including 3.00mm thick hylam brand IS-2036 marked, laminated sheet cover for mounting switches, sockets, fan regulators etc complete all as specified. Note : (a) Wiring shall be done by using proper colour coding (b) Earth wire shall be of green colour (c) On RCC roof/celing PVC conduit shall be provided on surface with proper fixing clips all as directed by Engr-in-Charge.

All as per item No 125.00 here-in-before but 5 Amp socket outlet on same board complete all as specified and as directed.

All as per item No 125.00 here-in-before but socket outlet 5 Amps independent board complete all as specified and as directed by Engr-in-Charge.

All as per Item No 125.00 here-in-before but for one 3 pin socket outlet 15 Amps socket outlet independent controlled by 15 Amp switch with 2.5 sqmm copper coductor multistranded cable PVC insulated FRLS and unshethed cable in and including PVC rigid concealed coduit 20 mm dia and unsheathed copper conductor multistrand cable 2.5 sqmm as earth wire FRLS PVC insulated in green color complete all as specified and as directed by Engr-in-charge.

S&F in replacement for MCB SP 6 to 32 Amps, 240 Volt 'B' Series complete all as specified and as directed.

S&F in replacement for MCB SPN 63 Amps 240 Volts, 'B' series complete all as specified and as directed.

S&F in replacement for switch piano, flush type single pole one way 5 Amp, 240 volts complete all as specified and as directed.

S&F in replacement socket outlet 5 amp / 5 pin flush type complete all as specified and as directed.

S&F in replacement Switch socket outlet combined 5 pin 5 amp flush type, 240 volts complete all as specified and as directed.

S&F in replacement Switch socket outlet combined 2 in 1 , 3 pin 5 amp and 15 amp flush type, 240 volts complete all as specified and as directed.

S&F switch piano, flush type single pole one way 5 Amp, 240 volts complete all as specified and as directed.

S&F switch piano, flush type single pole one way 15 Amp, 240 volts complete all as specified and as directed.

S&F socket outlet 2 in 1, 6 pin, 6 & 16 Amp complete all as specified and as directed.

S&F socket outlet 2 in 1, 6 Amp complete all as specified and as directed.

S&F Ceilling Fans 1200 mm sweep 240 Volts, 50 Hz ISI marked 5 Star rated complete with fan regulator of suitable make complete all as specified and as directed.

S&F Exhaust Fans 300 mm sweep 240 Volts 50 Hz AC Single phase ISI marked complete all as specified and as directed.

S&F Ceiling Rose 3 terminal surface type complete all as specified and as directed.

S&F for bell push, flush type single pole, 5Amp, 240 volts complete all as specified and as directed.

S&F Ceiling Rose 3 terminal surface type complete all as specified and as directed.

M& L in replacement for Lamp holder, insulated body, with back plate suitable for batten fittings complete all as specified and as directed.

M& L in replacement Self ballast LED retrofit Lamp with PVC body and PC Diffuser 9 watt 230 Volt 6500K complete all as specified and as directed.

S&F in replacement new generation energy saving ,wall mounted LED Tube light batten fittings, extruded aluminum heat sink provided for efficient heat dissipation & integrated electronic driver 20 Watt LED 6500K (4' ft long) with LED rod 20 watt, 230 Volts 50 Hz complete all as specified and as directed.

S&F in replacement bulk head luminaries IP65 with opal diffuser 10 watt, 230 Volts LED type complete all as specified and as directed by Engr-in-Charge.

S&F in replacement of LED street light fitting of cap 25 wattcomplete all as specified and as directed by Engr-in-Charge.

S&F in replacement recess mounting Energy efficient LED light bottom opening panel duly powder coated CRCA Sheet Housing IP 65 High quality polycarbonate body & aluminum plated heat sink high quality diffuser separate HPF driver suitable ceilling of 2'X2' complete all as specified and directed.

S&F in replacement Stepped type electronic fan regulator flush type on the existing phenolic laminated sheet complete all as specified and as directed.

S&F in replacement Calling bell Ding Dong/buzzer AC 230 Volts, single pole complete all as specified and as directed.

M&L in replacement for Sub main wiring with proper colour coding, insulated, unsheathed, multistranded ,copper conductor FRLS, cable of 2 run 6 Sqrmm for phase and neutral and one run of 4.0 Sqrmm for earth wire unsheathed , multistranded, copper conductor FRLS, drawn through rigid PVC concealed conduit fixed on wall. Two runs of cable for phase/neutral and one run of cable for earth will be measured and paid as one unit length. Note : Wiring shall be done in proper colour coding.

M&L for Earthing complete with galvanised steel earth plate electrode 60x60cmx6.3mm thick, buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel including GI protection pipes 20mm dia light grade and 15mm dia watering pipe medium grade upto test point, charcoal common salt, PCC 1:2:4 type B-1, Pit, CI cover with Handle, excavation and earth work in any type of soil, returning, filling and removal of surplus soil where directed to a distance n.exc. 50m rest complete all as shown in Electrical plate No 3 connected to earthing test point all as specified or indicated including testing on completion.

S&F in replacement for MCB TP&N 63 Amps 415 Volts, 'B' series rupturing capacity 10 KA complete all as specified and as directed by Engr-in-Charge

M&L for replacement distribution board sheet steel phosphatised powder coated for MCB with copper bus bar and neutral link earthing stud TPN 12 way 240 volts double door complete all as specified and as directed by Engr-in-Charge.

M&L for replacement distribution board sheet steel phosphatised powder coated for MCB with copper bus bar and neutral link earthing stud TPN 16 way 415 volts double door complete all as specified and as directed by Engr-in-Charge.

Taking down existing unsv ceilling fan for repair/Maint incl replacement of unsv spare parts i.e. bearing bush PVC connector PVC Clamp canopy , capacitor incl painting rewinding of any make/type and size (1200/1400 mm sweep) with super enamelled copper wire of appropriate gauge as existing to obtain the specified and satisfactory RPM as per menufactures specification including replacement of all insullation material varnishing heating,drying asssembling of stator/rotor connection and testing complete all as specified and as directed.

Taking down existing unsv Exhaust fan for repair/Maint incl replacement of unsv spare parts i.e. bearing bush PVC connector PVC Clamp canopy , capacitor incl painting rewinding of any make/type and size with super enamelled copper wire of appropriate gauge as existing to obtain the specified and satisfactory RPM as per menufactures specification including replacement of all insullation material varnishing heating,drying asssembling of stator/rotor connection and testing complete all as specified and as directed.

Excavation in trenches not exc 1.5 Mtr wide and not exc 1.5 Mtr deep getting out in for foundation of pole,stay,laying of cable and pipe etc complete all as specified and as directed.

(a) Hard/dense soil complete all as specified and as directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25m thick complete all as specified and as directed.

Removing excavated material from site to a distance not exc 50mtr away and depositing where directed not exc 1.5mtr from the starting point complete all as specified and as directed.

Supplying & Laying in trenches Clear Sand for cushioning under ground cable 8 cm below and 15 cm above complete in level complete all as specified and as directed.

M&L Sub class 'B' bricks well burnt laid with length perpendicular to the axis of the cable in trenches for protection to cable complete all as specified and as directed.

M&L for replacement distribution board sheet steel phosphatised powder coated for MCB with copper bus bar and neutral link earthing stud TPN 4 way 415 volts double door complete all as specified and as directed by Engr-in-Charge.

Labour for cutting to existing GI Pipe line of size 40 to 100 mm in position for addn/alteration or insertion of branch connection/Tee complete with Excavation, Returning filling, removal, cutting, existing GI Pipe line threading or drilling/bore in pipe line complete with MS clamp and jointing material i.e. Tee 40X20mm,nipple 40 mm clamp all as site requirement complete all as specified and as directed.

M&L of gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of size 20 mm bore complete all as specified and as directed.

M & L for tubing GI medium grade with all fittings laid in floor or trenches including taking out old UNSV pipe of size 20 mm dia complete all as specified and directed.

M&L in replacment of GI Pipe light grade 50 mm bore for cable protection as a guard pipe complete all as specified and as directed.

S&F of Energy efficient luminaire totally weather proof ,LED street light fitting 25 watt comprising a single piece,environment friendly light fittings including electronic driver luminair housing is of pressure die cast alluminium alloy extruded aluminium lamp housing and color temprature cool white 6500K, with IP65 Build in surge protection of up to 5kv and efficiency incl fabrication street light fitting bracket made out of GI tubing lightgrade suitable for 25 watt LED light suitable for security light fitting with necessary MS Clamps including nut,bolt,washers etc complete with PVC insulated and sheathed cable of size 1.5 sqmm 3 core aluminium conductor mutistranded 1100 volt grade 230 volts complete all as specified and directed by Engr-in-charge.

S&F new generation energy saving ,wall mounted LED Tube light batten fittings , extruded aluminum heat sink provided for efficient heat dissipation & integrated electronic driver 20 Watt LED 6500K (4' ft long ) with LED rod 20 watt, 230 Volts 50 Hz complete all as specified and as directed.

M& L for Lamp holder, insulated body, with back plate suitable for batten fittings complete all as specified and as directed.

M& L Self ballast LED retrofit Lamp with PVC body and PC Diffuser 9 watt 230 Volt 6500K complete all as specified and as directed.

M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 Sq mm, 3.5 core, complete all as specified and directed by Engr-in-Charge. Note: Wherever cable fixing/connection, suitable thimble should be used as per site situation.

M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 Sq mm, 3.5 core, complete all as specified and directed by Engr-in-Charge. Note: Wherever cable fixing/connection, suitable thimble should be used as per site situation.

M&L for replacement distribution board sheet steel phosphatised powder coated for MCB with copper bus bar and neutral link earthing stud SPN 8 way 240 volts double door complete all as directed by Engr-in-Charge. Note:- Distribution board and MCBs should be same make.

NOTE NO 1: - Samples of materials as approved will be kept in GE's sample room. NOTE NO 2: - All fittings and fixtures mentioned above will be fixed to the satisfaction of Engr-in-Charge and GE. NOTE NO 3: - All plumbing works shall be laid or fixed as to be completely air tight or water tight as specified and Contractor will furnish its certificates towards air / water tight before completion of work under the Contract. NOTE NO 4: - Warranty certificate to the Engineer-in-Charge where ever applicable shall be submitted by the Contractor at the time of fittings.

M/S A TO Z ENGINEERS

RAJINDER KUMAR AND CO

Bidder Name

RAJINDER KUMAR AND CO

PAKAYA BUILDERS AND DEVELOPERS PVT LTD

M/S A TO Z ENGINEERS