Loading…
New: tenders and results on WhatsApp
New: Find tenders, results and companies on WhatsApp, by text or voice note
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.5 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹9.5 L+₹72,148.59 (8.22%)Rejected-Finance | L2 | Rejected-Finance Not Lowest Bidder | |
| 3 | L3₹10.5 L+₹1.7 L (19.3%)Rejected-Finance | L3 | Rejected-Finance Not Lowest Bidder |
Tender Value
₹9.5 L
EMD Value
₹19,000
Closing Date
16 Jan 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE NO 2 Secunderabad
CWE NO.2, MUDFORT, SECUNDERABAD- 500003
REPAIRS MAINT OF SPLIT ACs WINDOW ACs PACKAGE ACs AND DEEP FREEZER UNDER GE GOLCONDA
2024_MES_689634_1
81262/E8
Open Tender
Civil Works
Item Rate
120 days
GE Golconda
As per tender documents
9 documents required · 9 mandatory
₹500
GE Golconda
₹19,000
Yes
27 Jan 2025
20 Dec 2024
20 Jan 2025
20 Dec 2024
16 Jan 2025
3 Jan 2025
Amount
Cold storage Room: Supply and fixing semi sealed compressor of package plant of ( 1.5X4 TR) capacity from its installed position by placing dummy plates to suction and discharge valves, opening of the compressor, removing of all the internal parts, cleaning of all parts thoroughly, overhauling of the compressor, replacing of worn out parts such as suction reeds, discharge reeds, piston rings, compression rings, connecting rods, bearings, piston pins, springs, spring washers, nuts, bolts, washers `O’ rings, gasket set etc , reassembling of the all internal parts after replacing the worn out parts, rewinding of the compressor re-fixing back, removing of the dummy plate, oil changing and checking the oil pressure, vaccumising and leak testing and testing the compressor completely all as specified and directed by Engineer-in-Charge. NOTE: The rate quoted shall deemed to include for compressor oil. However refrigerant gas will be measured and paid separately as per actual requirement.
Supply and fix Copper pipe With insulation of any Size 5/8" suitable for cold storage including taking out old pipe all as specified and directed by Engineer-in-Charge.
Supply and fix 3 Core Copper Cable of any Size suitable for cold storage all as specified and directed by Engineer-in-Charge.
Cleaning of the evaporator coils of required capacity for (1.5X4) TR including cleaning with acid by forced feed method to remove the unwanted dust particles formed on the coil and fins, cleaning of the dust particles, parts of periodical maintenance, cleaning of liquid lines, strainer, expansion valve etc. and testing complete all as specified and directed by Engineer-in-Charge.
Testing of Nitorgen Pressure of Gas Supply & charge refrigerant gas R-22 upto required level complete all as specified and directed.
Supply and fix cold storage room Temperature gauge as per sample complete and all as specified and directed by Engineer-in-Charge.
Supply and fix out door unit fan motor with blade water proof type suitable for cold storage unit all as specified and directed by Engineer-in-Charg
Servicing of the Cold Storage Unit of (1.5x4) ton capacity, cleaning of the evaporator coils externally, Water Washing with Jet Pump to remove the dust particles deposited on the cooling coil, cleaning of the condensing units to reduce the discharge pressure with the Caustic Soda / Chemical and testing complete all as directed.
S & Fix capacitor of 50/60 MFD with Contactors for Cold Storage Plant all as directed and taking out the old unserviceable one. Make- CONCAP /BHEL/TIBCON
S & Fix Air Filter to the Cold Storage Plant of ( 1.5x 4) Ton capacity and taking out the old unserviceable one.
S & Fix Thermostat set complete for Cold Storage Plant of ( 1.5x 4) any make/model/capacity including removing the old unserviceable thermostat Make – Danfoss / Renutraul/Annapurna
SPLIT ACs /Window ACs . Taking down carefully old burnt/unserviceable compressor unit of 1.0 ton capacity window type / Split type AC and replacing the same with New compressor including necessary accessories and mounting materials, welding, brazing, leak testing, vaccumising and charging the refrigerant gas to the required pressure and weight, reinstalling the AC unit at the same place including testing and commissioning complete to any make of AC all as directed. Make : Kirloskar / Voltas/ LG/ OEM Note:- Rate quoted shall be inclusive of R-22 refrigerant gas charging, testing and commissioning.
All as per item No : 12 above but for Window/Split type AC 1.50 Ton Capacity
All as per item No : 12 above but for Window/Split type AC 2.00 Ton Capacity
S & Fix Relay assembly and connecting with necessary wiring complete suitable for Window/Split type of AC 1.0/1.5/2.0 Ton Capacity and taking out the old unserviceable one. Make : Shriram /Renutraul / Voltas
S & Fix Over load protector complete suitable for Window/ Split type AC of 1.0/105/2.0 Ton Capacity including removal of old Un Serviceable. Make : Shriram /Renutraul / Voltas
S & Fix Thermostat set complete for window/split type AC of any make/model of Capacity 1.0/1.5/2.0 Ton including removing the old unserviceable Make – Renutraul/Annapurna/Usha / OEM
S & Fix Blower fan motor, with fixing arrangement complete operating on 215 / 240 Volts, single phase AC supply, multi speed suitable for Window AC 1/1.5/2.0 Ton capacity including taking out the old one. Make : OEM
Rewinding of outdoor fan motor with same guage and turns and weight of copper enameled wire and replacement of bearing, testing and commissioning of 1.0/1.5/2.0 Ton split type AC of any make/ model complete all as directed.
S & Fix capacitor of 36/45 MFD for Window/Split type AC's all as directed and taking out the old unserviceable one. Make- CONCAP /BHEL/TIBCON
S & Fix capacitor of 50/60 MFD for Window/Split type AC's all as directed and taking out the old unserviceable one. Make- CONCAP /BHEL/TIBCON
S & Fix Copper capillary tube including strainer with necessary brazing, Leak Testing suitable for window /Split type AC 1 Ton to 2 Ton capacity and taking out the old unserviceable one.
S & Fix Wiring kit for window type AC of 1.0/1.5/2.0 Ton capacity with copper wire PVC insulated single core of size1.5 sq mm, clips, terminal connector etc complete all as directed and taking out the old unserviceable one.
All as per item No : 25 above but for Split type AC of capacity 1.0/1.5/2.0 ton .
Cleaning the unit with CTC except evaporator and condensor and leak testing the system with Nitrogen gas and detecting the leak and repairing, brazing and sealing the leakage including charging the refrigerant R-22 gas to the required pressure and weight of gas for 1.0/1.5/2.0 Ton capacity window type ACof any make complete all as directed Note :- Gas charging will be measured separately against relevant item of this schedule.
All as per item No : 26 above but Split type AC of capacity 1.0/1.5/2.0 ton .
Servicing to the split type AC units of 1/1.5/2.0 ton capacity, cleaning of the evaporator coils externally with Caustic Soda / Chemical to remove the dust particles deposited on the cooling coil, cleaning of the condensing units to reduce the discharge pressure with the Caustic Soda / Chemical and testing complete all as directed.
Servicing of the window type Air Conditioners of capacity 1/1.5/2.0 ton capacity, cleaning of the evaporator coil externally with Cautic Soda / chemical to remove the dust particles, cleaning of the filters and testing complete all as directed.
S & Fix Air Filter to the window /Split type Air Conditioners of 1/1.5 /2.0 Ton capacity and taking out the old unserviceable one.
S & Fix Evaporator coil, including connected brazing welding work and provn of refrigerant suction/discharge line suitable for Window Ac / Split Type Ac 1.0/1.5 / 2.0 TR capacity including removing the unserviceable evaporator coil from the existing position all as directed.
S & Fix new remote control assembly for split type AC 1.5 /2.0 TR capacity including removing of the old unserviceable complete all as directed.
Taking out the unserviceable condensor coil and S & F new condensor coil made out of 25 SWG copper tubing having 30/34G aluminium fins per CM length for window AC/Split type AC 's of 1.5 Ton capacity all as directed including taking down old U/S condenser coil.
S & Fix Front grill for Window AC as existing make/model and taking out the old unserviceable one.
S & Fix indoor blower motor for split type AC of capacity 1.5/2.0 Ton as per existing model complete all as directed and taking out the old unserviceable one. Make : OEM
S & Fix PVC drain pipe 25 mm for rectifying water leakage from AC units complete all as directed and taking out the old unserviceable one.
S & Fix copper tube of size 3/8, 5/8 inch dia includng necessary soldering , flooring and connecting and testing in between indoor to out door units of split type AC 1.5/2.0 Ton complete all as directed and taking out the old unserviceable one.
Description all as per Item No-37 above but size of copper tubing 1/2, 1/4 inch dia complete all as directed.
S & Fix insulation felt for split type AC 1.5 / 2.0 Ton copper tube inlet/outlet to out door unit up to 3 mtr in length complete all as directed.
Taking out unserviceable 1 Pole contactor from split AC and replacing the same with new contactor suitable for 240V,50Hz coil complete all as directed and taking out the old unserviceable one.
S & Fix Oscillation motor for the indoor unit of the split type AC of 1.5/2.0 Ton capacity complete all as directed and taking out the old unserviceable one.
Taking out unserviceable dummy nuts from the split AC units and S & Fix new Brass Dummy / Flare nuts of existing size complete all as directed and taking out the old unserviceable one.
S & Fix Fan blade for 1.5/2 Ton capacity window/Split type ACs as per existing size/ model complete all as directed and taking out the old unserviceable one.
Taking down UNSV Indoor unit of Split type AC of 1.5 TR capacity any make, model and S & F new indoor uint of same capacity suitable to existing Outdoor Unit including the necessary connections and testing complete all as directed. Make : OEM
Repairs to PCB of split type AC 1.5 /2.0 TR capacity including of replacement of electronic spares complete all as directed.
DEEP FREEZERs Taking out burnt / unserviceable compressor from existing Deep Freezer and S & F new sealed compressor unit including necessary welding/brazing/pressure testing with refrigerant after charging leak proof condition and testing complete for Deep freezers of any capacity. Note:- Rate quoted shall be inclusive of R-134a refrigerant gas charging, testing and commissioning. Make : Kirloskar/ Shriram/Voltas/Hitachi
S & Fix Over load protector complete suitable for Deep Freezer of any make/model of capacity 280/310 Ltrs including removal of old Un Serviceable Make : Shriram /Renutraul / Voltas
S & Fix Thermostate set complete for Deep Freezer of any make/model of capacity 280/310 Ltrs including removing the old unserviceable Make – Danfoss / Renutraul/Annapurna
S & Fix Copper capillary tube including strainer with necessary brazing, Leak Testing suitable for Deep Freezer and taking out the old unserviceable one.
Cleaning the gas system with CTC, rectification of Body leakages, M&L Charging gas with refrigerant gas incl cutting/welding/brazing and leak testing with nitrogen, testing including commissioning complete for deep freezer 280/310 ltrs capacity Note :- Gas charging will be measured separately against relevant item of this schedule.
Testing of Nitorgen Pressure, Supply & charge refrigerant gas R-22 upto required level complete all as specified and directed.
Testing of Nitorgen Pressure, Supply & charge refrigerant gas R-134 upto required level complete all as specified and directed.
S & Fix Fan Motor With blade for Deepfreezer of any size as per existing size/ model complete all as directed and taking out the old unserviceable one.
S & Fix Plug Top of 15A/20A as per existing size/ model complete all as directed and taking out the old unserviceable one.
Sri Lakshmi Enterprises (BID ID -3210049)
SANTHAM TRADERS (BID ID -3206593)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .