Providing and Installation of Boom-Barriers and children swings and laying of EPDM Flooring at DDA flats Pkt-13 Ph-1, DDA flats pkt-2 sec- 2, NPSC CGHS, Harshuk CGHS, Shri Niketan CGHS, Airforce and Naval Officers CGHS, Brahma CGHS, Kamal Vihar CGHS

Supplying and installation of automatic premium quality Boom Barrier, Boom length - 6 meter Model ASN601 - 1. Opening and closing time - ( 6 Sec ) 2. Electromachnical Boom Barrier 3. Very Smooth Movement. 4. Double limit : Electronic limit and motor sensor memory limit for boom rising and falling. 5. Interface: Infrared photocell interface, Loop detector interface and IC system interface. 6. Operated by : Radio Receiver with Remote Controller, Push button and Dual Channel Loop Detector including with the name of MLA with their constituency is to be written on SS plate/retro reflective sheet of suitable size on Boom Barrier or as directed by Hon'ble area MLA

Supply & Laying 2x4 sqmm XLP insulated & PVC Sheated Copper Conductor Armoured Power Cable of 1.1 KV Grade on Surface(per mtr).

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil

Excavating holes more than 0.10 cum & upto 0.5 cum including gettingout the excavated soil, then returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5 m. All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 40 mm nominal size)

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete Hot finished welded type tubes

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing and fixing 3mm thick white acrylic plastic sheet with nut & bolts as per direction of Engineer in-charge.

Providing and fixing IRC fabric mesh 75x25mm having weight not less than 7.75 kg per/sqm welded in frame of made of MS Angle iron and welded to fencing frame for boundary wall railing including welding minimum 100mm per sqm of mesh inlcuding making necessary requirement and priming coat with approved primer all complete steel as per direction of Engineer in charge.

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.