Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.6 CrAccepted-AOC A T ROAD HOUSE NO 0 CITY TOWN BOKAKHAT P O BOKAKHAT P S BOKAKHAT DIST GOLAGHAT PIN 785612 | BOKAKHAT | GOLAGHAT | ASSAM | 785612 | ₹1.6 Cr | L1 | Accepted-AOC Work Order Issued |
| 2 | L2₹1.6 CrRejected-AOC AT ROAD BOKAKHAT ASSAM | ₹1.6 Cr | L2 | Rejected-AOC L2 |
Tender Value
₹1.6 Cr
EMD Value
₹3.1 L
Closing Date
29 Sept 2022, 2:00 pmClosed
CE PWD NH Works Assam, Chandmari, Guwahati-781003
O/O The CE PWD NH Works Assam, Chandmari, Guwahati-781003
Emergency Repair, Maintenance works (Part-II) on NH-715 from km 386/000 to km 402/000 on account of Honorable President of India s visit to Kaziranga National Park, under SOPD 2021-22 under Golaghat NH Division in the State of Assam
2022_PWBNH_26926_1
PWD-NH(R)/GOL/SOPD/2022-23/02
Open Tender
Civil Works – Highways
120 days
Kaziranga
Please refer Tender documents.
5 documents required · 5 mandatory
₹3,200
₹3.1 L
Yes
O/O The CE PWD NH Works Assam, Chandmari, Ghy-3
5 Dec 2022
8 Sept 2022
29 Sept 2022
8 Sept 2022
29 Sept 2022
8 Sept 2022
15 Sept 2022
Amount
Maintenance of Earthen Shoulder (filling with fresh soil) (Making up loss of material/ irregularities on shoulder( Average 150mm filling )to the design level by adding fresh approved soil and compacting it with appropriate equipment.)
Filling Pot- holes and Patch Repairs with - Bituminous concrete, 40mm. (Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, backfilling the pot holes with hot bituminous material as per clause 504, compacting , trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2. ( including all lead & lifts) for grading II Material
Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom.( Including cost of testing of materials at site and laboratory as directed by the deptt.) '(I)With Bitumen emulsion CSS-1h (b) dry & hungry bituminous surface
Bituminous Concrete (Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 % of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT&H specification clause No. 509 complete in all respects) ( including all lead & lifts) (Including cost of testing of materials at site and laboratory as directed by the deptt.) (c) With hydrated lime/cement as filler (refer table 500-9 of MoRT&H specification) & anti stripping agent as per IS:14982 (Refer Appendix -5 of MoRT&H specification) (III) with 30/40 or VG-40 grade Bitumen (msa>30) (ii) For grading-II (13 mm nominal size) From km 386/00 to 402/000
Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes and conforming to the MoRT&H specifications
Direction and place identification sign upto 0.9sqm size board. Providing and erecting direction and place identification retro-Reflectrorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide clause 801.3 fixed over aluminium sheeting, 2mm thick with area not exceeding 0.9sqm fixed on an angle iron of 25x25x4mm supported on a mild steel angle iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly design foundation with M-15 grade Cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing and sign. ( All the Steel work must be Tata/Sail/or any other approved brand)
Providing ‘Sparkle Solar Road Studs, manufactured by Tata B.P. Solar India Ltd. Of size (125mmx125mm), 90mm height (from bottom of shank to the top of stud) with detachable battery, m6LEDs-three on each side for Bi-directional studs/3 LEDs on one side for unidirectional studs, ultra bright LED in amber and red colour, weight per stud 700+25 gms, flash rate of 50-65 times per minute completely water resistant and weather proof with replacement warranty and free maintenance fro one year from the date of installation of stud on road-(installation should be made using adhesives and procedures recommended by manufacturer under the supervision of their competent technician). a) Bi-directional Stud-
Providing reflective pavement marker with Micro prismatic lens in both direction having thermoplastic body adhering to the specification and guidelines of MoRT&H’s fixed to the road surface using the adhesives and the procedures recommended by the manufacturers with three months replacement warranty and free maintenance.
M/S. M.P. AGARWALLA
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid