GE/BENG/20 OF 2020-21 REPAIR TO JOINERY, COMPOUND WALL, FENCING, HARD STANDING, PATH, CULVERT AND MISC WKS IN CERTAIN UNITS UNDER AGE B/R-I OF GE BENGDUBI MIL STN

Amount

SCHEDULE 'A' PART-I (B/R WORKS)

Demolition of brickwork or stone/boulder masonry built in cement mortar including all quions, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles all as directed.

M&L for Fly ash brick work with old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for Fly ash brick work with old size bricks, straight or curved on plan to any radius half brick thick built in In cement mortar 1:4 complete all as specified and directed.

M&L for Rendering 10 mm thick on other than fair faces of brick work or concrete surface in cement mortar (1:4) surface finished even & smooth without using extra cement complete all as specified and directed.

M&L for Rendering 15mm thick on other than fair faces of brick work in two layers of 10mm thick in cement mortar (1:6) and 5mm thick in cement mortar (1:4) surface finished even & smooth without using extra cement complete all as specified and directed.

M&L for Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of white cement primer including preparing surface of cement base even and smoothcomplete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate in lintel upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs, fixing of hold fast and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified.

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome complete all as specified and directed.

M&L for PCC 1:3:6 type C0 using 12.5 mm graded stone aggregate providing precast cement concrete louvres and jallies, 25mm thick (measured solid), including all mouldings set in CM1:6.

M&L for PCC 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) providing precast cement concrete in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc.(of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match set in CM 1:6.

Demolition reinforced cement concrete (reinforcement cut as required to faciliate demolition) of any description and in any position not otherwise specifically provided for all as specified and directed.

Demolition reinforced cement concrete (reinforcement cut as required to faciliate demolition) roofs, floors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work all as specified and directed.

M&L Reinforced cement concrete 1:2:4 type B1 using 20 mm graded crushed stone aggregateas as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M&L Reinforced cement concrete 1:2:4 type B1 using 20 mm graded crushed stone aggregateas ias in columns, pillars, piers, posts and strutscomplete all as specified and directed.

Use & Waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, rough finished surface of concrete complete all as specified and directed.

Use & Waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions, rough finished surface of concrete complete all as specified and directed.

M&L for TMT bars (Fe-500/ Fe-550D) 10 mm dia & over, cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends & binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

All as per item No. 18.00 here-in-before but 5 mm dia and over upto and including 10 mm dia in stirrups, spaces and binders complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in natural ground and making good disturbed ground complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in concrete and making good disturbed ground complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling & mass concrete complete all as specified and directed.

M&L for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 complete as specified and directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed.

Supply only mild steel in flat, round or square bars, in available lengths as in line wire Fe 410-W(gde-E-250) quality-Acomplete all as specified and directed.

Supply only galvanised chain link fencing of size 100mm x100mm mesh made out of 10guage mild steel ganvanised wire complete all as specified and directed.

Fixing only chain link fencing including line wires any mesh size and type to any type of standards rails, straining bolts, etc including provision of binding wire etc complete all as specified and directed.

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

Ditto all as per item No. 29.00 here-in-before but fixed in repairs complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in foundation filling & mass concrete complete all as specified and directed.

S&F framed work as in gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-410-W (Gde-E-250 quality-A) complete all as specified and directed.

Taking down unservicable steel gate/shutter of any description of size exc 9 sqm but n.exc 12 sqm each including taking out of unservicable parts/portion by cutting and replacing with new one as per the existing size and specification and refixing in the same opening by maintaining proper alignment including repairing defective portion of gate/shutter, steel structurre to match with exsiting structure including necessory cutting, drilling, welding and reveting etc, greasing, oiling to movable parts including all necessory fittings and appying one coat of synthetic enamel paint over a coat of pink primer to new portion/structure complete all as specified and directed.

S&F for 1.00 mm thick Steel rolling shutters, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; eerected in position as indicated, complete; push pull or manual type complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified.

M&L 75mm thick PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in flooring, path/paving etc. finish the surface rough complete all as specified and directed.

M&L for pre polished coloured cement concrete chequred tile of approved quality size 300X300X 25mm thick on floors over and including 20 mm thick screed bed CM 1:6 set and jointed in neat cement slurry and pointed with colour to match th tiles complete all as specified and directed.

M&L for providing Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade laid on 25mm thick layer of sand well watered & rammed and jointed and pointed with grey cement and pigment all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden, metel frames including punching or drilling out glazing pins/spring clips complete all as specified and directed.

S&F figured glass pin head type 3mm thick and glazing with oil putty in squares exc 0.5 Sqm in each pane complete all as specified and directed.

S&F 3.00 mm thick frosted glass, pin headed and glazing with oil putty in square n exc 0.5 sq.m in each pane complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

S&F 2nd class hard wood plain fillets square or rectangular in section wrought of cross sectional area exc. 13 Sqcm but not exc. 25 Sqcm secured with nails or screws fix with old window frame complete all as specified and directed.

Taking down chowkats or frames n exc 1.5 Sqm each (with out taking off shutter from the frame) and removing material from the site of work complete all as directed

Taking down chowkats or frames exc 1.5 and n exc 4.0 Sqm each (with out taking off shutter from the frame) and removing material from the site of work complete all as directed

Taking down old unserviceable shutters of any description exc 1 but n.exe 2.00 Sqm each and removing materials from the site of work complete all as directed

S&F 1.25mm thick pressed steel frame door 105 X 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

S&F 1.25mm thick pressed steel frame door 165 X 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

M&L for 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels and commercial type on both sides complete all as specified and directed.

S&F 2nd class HW factory made 35mm thick Plain, framed, panelled shutters (any number of panels), with panels panel of 9mm B.W.P. commercial ply: supplied and fitted to chowkats as specified in SSR Part-I, section 8, clause 8.24 (b) complete all as specified and directed.

S&F 2nd class HW glazed and skeleton 35mm thick door shutters open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sites of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (b) complete all as specified and directed.

S&F in repairs steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, devetailed or welded complete all as specified and directed.

S&F in repairs steel windows with side hung double shutter ( one for glazing and other for mosquite proofing ) including projection type hinghs with steel handle, and steel pag stay, complete with glazing bars, dovetailed or welder all as specified.

S&F in repairs steel ventilator with top hung shutter including hinges steel peg stay complete all as specified and directed.

S&F 4mm thick sheet glass of ordinary quality and glazing with oil putty in squares n. exc 0.50 sqm in each pane complete all as specified and as directed.

S&F 4mm thick sheet glass of ordinary quality and glazing with oil putty in squares exc 0.50 sqm in each pane complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F mild steel sliding door bolts liding door bolts plate type 300mm bolt not less than 16mm dia with and including a minimum of 6 bolts and nuts all as specified and directed.

S&F 100 mm Butt hinges, medium weight, stainless steel, and fixed complete all as specified and directed.

S&F 150 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 150 mm Aluminium handles, cast type, anodised complete all as specified and directed.

S&F mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed for 150 mm all as specified and directed.

S&F mild steel pressed handles oval type stove enamelled black size 150 mm all as specified and directed.

S&F floor door stopper of brass body 140 mm long and tongue with rubber shoes all as specified and directed.

S&F stainless steel 20 mm dia curtain rod with fancy type SS bracket and hooks complete all as specified and directed.

Taking down cement plaster any description on brick or stone walls including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for rendering in CM 1:4 on walls 15mm thick on fair faces of brick work finished the surface even and smooth with out using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on other than fair faces in CM 1:6 finished the surface even and and smooth without using extra cement complte all as specified.

M&L rendering 5 mm thick in cm 1:3 over/soffit of chajja finished surface even and smooth with out using extra cement all as specified and directed.

M&L for Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of white cement primer including preparing surface of cement base even and smoothcomplete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper preparing surface of wall even and smooth over and smoothappying with 1mm thick wall care putty complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coat white wash all as specified and directed.

M&L for washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of cement based paint (any tint) on walls complete all as specified and directed.

M&L for one coat of oil bound distemper on old surfaces of wall including preparation of old undecorated surfaces all as specified and directed.

M&L for preparation of old pained wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint any tint all as specified and directed.

M&L for preparation of old pained wooden surfaes of any description n.exc 10 cm width or girth and applying one coat of synthetic enamel paint any tint all as specified and directed.

M&L for preparation of old wall painted surface and apply two coats of plastic emulsion paint over a coat of primer with 1mm thick wall care putty all as specified and directed.

M&L for preparation of old wall painted surface and apply two coats of Apex paint over a coat of primer with 1mm thick wall care putty all as specified and directed.

M&L for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint any tint all as specified and directed.

M&L for preparation of old painted steel surfaces of any description n.exc 10cm width or girth and applying one coat of synthetic enamel paint any tint all as specified and directed.

M&L for preparing plastered or unplastered old surface of walls including brooming down or scrapping down with steel wire brushes, smoke soot, moulds, moss efflorescent salts and trading oil and greasy spots and applying one coat of white (Lime) wash on wall complete all as specified and directed.

All as specifed in above item No.16 above but applying one coat of white (Lime) wash on ceiling all as specified and directed.

Rewriting repainting existing writing letters or figures (block roma, roman, italic, Indian n exc 30 cm height) all as specified and directed.

Uprooting of vegetation growth from walls, roof chajja gutter cleaning the surface and making good holes with cement mortar (1:3) each hole not exceeding 0.10 Sqm all as specified and directed.

M&L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on one or more coats on old work all as specified and directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing and rubbish off the premises.

M&L for non skid ceramic tiles joint free coloured tiles 7mm to 8mm area exceeding 0.11sqm but n.exc 0.18 sqm on floors over and incl15mm thick screed bed in CM(1:6) set jointed in neat cement slurry and pointed with colour cement to match the tiles complete.

M&L for glazed coloured ceramic tiles joint free coloured 300 X 450 mm size 7mm thick on walls over and incl 10mm thick plastering in CM(1:4) set jointed in neat cement slurry and pointed with colour cement to match the tiles complete.

Dismantling water tanks exc 250 ltr but not exc 500 ltr and removing from site etc complete all as specified and as directed.

Dismantling water tanks exc 500 ltr but not exc 1000 ltr and removing from site etc complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tank 1000 ltrs capacity conforming to IS-12701(1989) cylindrical vertical type double-layered with closed top including inlet outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tank 500ltrs capacity conforming to IS-12701(1989) cylindrical vertical type double-layered with closed top including inlet outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S&F in repair 20mm bore, gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe all as specified.

S&F 20 mm bore ball brass valve, high pressure, with ploythene float and flynut complete, screwed for iron pipe or brass ferrule .

Taking down steel tubing & connections of 15 mm dia bore complete all as specified and directed.

Taking down steel tubing & connections of 20 mm dia bore complete all as specified and directed

Taking down steel tubing & connections of 25 mm dia bore complete all as specified and directed.

S&F galvanised steel water tubing, 'medium grade' ISI marked galvanised 15mm bore, with all fitting and fixed complete to walls and ceilings or laid in floors/laid in trenches complete all as specified and directed.

S&F galvanised steel water tubing, 'medium grade' ISI marked, 20mm bore, with all fitting and fixed complete to walls and ceilings or laid in floors/laid in trenches complete all as specified and directed.

S&F galvanised steel water tubing, 'medium grade' ISI marked, with all fitting and fixed complete to walls and ceilings or laid in floors, 25mm bore complete all as specified and directed.

M&L for cutting, chases, pinning in block masonry wall for concealed water tubing and making good to facing and pointing in CM 1:3, cutting n. exc. 10 cm girth all as specified and directed.

S&F in repair Bottle trap of PTMT 32 mm dia having minimum water seal of 25mm complete all as specified.

S&F in repair 100 cast iron sanitary connections short connections pipe of length upto 300 mm complete all as specified and directed.

S&F in repairs Bib tap 15 mm CP with crutch or butterfly handle screwed down srewed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F Towel rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight) 190gms) all as specified.

S&F Grating doom 100 mm dia with waste hole of PTMT ( Minimum weight 140gms) all as spcified.

S&F in repair chromium plated shower roses 125 mm size with or without swivel joints of standard size including fixing to 15mm steel pipe or union complete all as specified and as directed.

S&F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 mm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repairs 10 lits capacity PVC flushing cistern low level, white, with inlet, ball valve, float and handle flush pipe including brackets etc complete.

S&F stop valves fancy type chromium plated brass cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed for 15 mm dia bore pipe complete all as specified and directed.

S&F vitreous china wash hand basin in repair oval special type 510x410mm including fency type pillar taps including PVC waste pipe,PVC connetion and waste coupling complete all as specified. Make-Hindware, CERA

S&F 15mm bore Pillar taps fancy type, cast copper alloy, with long swan neck, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and as directed.

S&F 15mm dia PVC connection with PTMT nuts of length 450mm complete all as specified.

S & F in repairs water closet (Squat Pattern) complete incl provn of lime concrete bedding Orissa pattern size 580 x 440mm white integral foot rests (excluding flush pipe or flushing cisterns) including connection to trap and flushing pipe anti syphonage pipe etc complete and making good to floor complete all as specified and directed.

S&F in repair wash down water closet vitreous china pan pedestal pattern white including plastic water closet seat white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

Suppy and fixing Vitrious china urinals bowl type (Back or corner wall type ) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement with brackets, flush pipes, grating and union for discharge pipe etc complete all as specified and directed.

S & F in repairs Kitchen Sink with drain board made of stainless steel 1mm thick with plugs washers and waste pipe incl bedding in CM to dwarf wall incl fitting cantilever brackets and connecting union to pipe over all size 915mm x 460 mm and bowl size 410 mm x 330mm x160mm complete all as specified and directed.

(Note : The Scope of Work contained in 'Sch of Credit' amounting to Rs. 90570.00 (refer Tender Srl Page No 34). The Quoted sum shall be arrived at after deducting the amount of “Sch of Credit” from the total amount of the ‘BoQ’

BISWAJIT SAHA

AMULYA KUMAR ROY

PRADIP KUMAR BOSE

M/S BOSE CONSTRUCTION

NIRMAN INDIA

M/S JANATA CONSTRUCTION