Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1st₹5.9 LAccepted-Finance | 1st | Accepted-Finance Accepted | |
| 2 | 2nd₹6.9 L+₹1.0 L (17.6%)Accepted-Finance | 2nd | Accepted-Finance Accepted |
Tender Value
₹5.5 L
Closing Date
28 Oct 2021, 6:00 pmClosed
Executive Engineer (Civil)
BSNL Civil Division Telephone Exchange Campus, Near Sidhgora Police Station , Sidhgora, Jamshedpur
Internal and External repairing and painting of Planning Office , Guard Room and Compound wall, Golmuri, Jamshedpur SSA Jamshedpur 3rd call
2021_BSNL_92042_1
02/NIT/EE (C)/CDJ/2021-22
Open Tender
Civil Works
Works
90 days
Golmuri
Please refer Tender documents.
2 documents required · 2 mandatory
₹590
Yes
Accounts officer (Cash), O/o GMTD
Exempted
1 Nov 2021
20 Oct 2021
1 Nov 2021
20 Oct 2021
28 Oct 2021
20 Oct 2021
CIVIL COMPONENT
SH: FINISHING
12 mm cement plaster of mix :
1:6 (1 cement: 6 coarse sand)
Finishing walls with Acrylic Smooth exterior paint of required shade :
New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade :
Old work (one or more coats) .
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :
One or more coats on old work.
White washing with lime to give an even shade :
Old work (two or more coats) .
Finishing walls with Acrylic Smooth exterior paint of required shade :
Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface).
SH: ROOFING
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,
Single socketed pipes.
110 mm diameter
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
Single tee with door
Single tee without door
110 mm bend
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
SH: REPAIRS TO BUILDINGS
Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. meters and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50metres lead :
With cement mortar 1:4 (1cement: 4 coarse sand).
Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:
Float glass panes of thickness 4 mm.
Renewal of old putty of glass panes (length) .
Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.
SH: Dismentalling & demolishing
Dismantling G.I. pipes (external / internal work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :
15 mm to 40 mm nominal bore
Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead :
100 mm diameter
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all loads including all lifts involved.
S.H. WATER SUPPLY
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
25 mm nominal bore
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall
15 mm nominal outer dia. Pipes.
20 mm nominal outer dia. Pipes.
25 mm nominal outer dia .Pipes.
40 mm nominal outer dia. Pipes.
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work)
15 mm nominal bore
20 mm nominal bore
25 mm nominal bore
40 mm nominal bore.
SH: Credit Items
Credit for old damaged G.I. pipes.
40mm nominal bore
25 mm nominal bore
20mm nominal bore
15mm nominal bore
Credit for old damaged SCI rain water/sewerage pipe.
100 mm diameter
SH: Market rate items
Uprooting of all unwanted pipal tree from brick masonary as well as RCC portionin the building i/c applying of of copper sulphate solution and refilling the same with rich concrete as per the direction of Engineer in charge.
Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and refixing to water supply line as per direction of Engineer-in- charge.
Providing and laying cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) of thickness 40 mm at all floor levels . The complete top surface finally finished with trowel with neat cement slury and making pattern of 300 x 300 mm sqm 3 mm deep complete . The whole terraces so finished shall be flooded with water for a minimum period of two weeks for curing and final test . ( All above operation to be done in order and as direction and specified by Enginner-In-Charge).
SURENDRA PRASAD
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .