Loading
Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹27.5 Laccepted-finance | ₹27.5 L | accepted-finance |
Tender Value
₹69.0 L
EMD Value
₹70,000
Closing Date
4 Feb 2026, 10:45 pmClosed
Bangalore Electricity Supply Company Limited
Vidya
Supply of High visibility Reflective Jacket as per tender specification
BESCOM/2025-26/IND0163/CALL-3
BESCOM/2025-26/IND0163/CALL-3
Open
Two Tender Document System(Two Cover)
BESCOM Corporate Office Procurement section Bengaluru
3 documents required · 2 mandatory · 1 optional
IIn case of Original Manufacturer, The Bidder should have manufactured, tested and supplied at least 80percent and 40per in respect of Micro and Small Enterprises of the tendered quantity of safety equipment in the preceding 3 years i.e 2022-23, 2023-24 and 2024-25 and last 2 years i.e 2023-24 and 2024-25 for Micro & Small Enterprises to Electricity Distribution companies or Government Electrical Utilities,PSUs. 2.In case of Authorized Dealer or Distributor a. The Original Manufacturer should have manufactured, tested and supplied at least 80per and 40per in respect of Micro & Small Enterprises of the tendered quantity of tendered type safety equipment in the preceding 3 years i.e 2022-23, 2023-24 and 2024-25, last 2 years i.e 2023-24 and 2024-25 for Micro & Small Enterprises to Electricity Distribution companies or Government Electrical Utilities,PSUs and b.The Authorized Dealer or Distributor should have supplied at least 30per of the tendered quantity tendered type safety equipment in preceding 3 years i.e 2022-23 2023-24 and 2024-25 to Electricity Distribution companies or Government Electrical Utilities,PSUs Documents to be uploaded In case of OEM Scanned copies of Order completion certificates in the name of Original Manufacturer issued by an officer not below the rank of Executive Engineer or equivalent officer of the concerned Electricity Distribution companies or Government Electrical Utilities, PSUs shall be uploaded. Micro and Small Enterprises shall upload valid MSME (UDYAM) registration certificate obtained from the competent authority certifying that Bidder is a Micro and Small Enterprises.2.In case of Authorized Dealer or Distributor a.Scanned copies of Order completion certificates in the name of Original Manufacturer issued by an officer not below the rank of Executive Engineer or equivalent officer of the concerned Electricity Distribution companies or Government Electrical Utilities,PSUs shall be uploaded.Micro & Small Enterprises shall upload valid MSME (UDYAM) registration certificate obtained from the competent authority certifying that Bidder is a Micro and Small Enterprises and Scanned copies of Order completion certificates in the name of Authorized Dealer Distributor issued by an officer not below the rank of Executive Engineer or equivalent officer of the concerned Electricity Distribution companies or Government Electrical Utilities,PSUs shall be uploaded.
In case of Original Manufacturer The Bidder shall have Performance certificate issued by any Electricity Distribution Companies or Govt. Electrical Utilities,PSUs for having satisfactory operation for in the Preceding 3 years i.e 2022-23, 2023-24 and 2024-25 as on the date of bid submission for minimum of 80per and 40per in respect of Micro and Small Enterprises of tendered quantity tendered type safety equipment 2 In case of Authorized Dealer or Distributor a.The Original Manufacturer should have performance certificate issued by any Electricity Distribution Companies or Govt. Electrical Utilities,PSUs for having satisfactory operation for Preceding 3 years i.e 2022-23, 2023-24 and 2024-25 as on the date of bid submission for minimum of 80per and 40per in respect of Micro & Small Enterprises of tendered quantity of tendered type safety equipment And b. The Authorized Dealer or Distributor should have performance certificate issued by any Electricity Distribution Companies or Govt. Electrical Utilities,PSUs for having satisfactory operation for Preceding 3 years i.e 2022-23, 2023-24 and 2024-25 as on the date of bid submission for minimum of 30percent of tendered quantity of tendered type safety equipment.Documents to be uploaded In case of OEM a. Scanned copies of the performance certificates in the name of OEM issued by an officer not below the rank of Executive Engineer or equivalent officer of the concerned Electricity Distribution companies or Government Electrical Utilities,PSUs shall be uploaded.Micro & Small Enterprises shall upload valid MSME (UDYAM) registration certificate obtained from the competent authority certifying that Bidder is a Micro and Small Enterprises.2.In case of Authorized Dealer or Distributor a. Scanned copies of performance certificates in the name of Original Manufacturer issued by an officer not below the rank of Executive Engineer or equivalent officer of the concerned Electricity Distribution companies or Government Electrical Utilities/PSUs shall be uploaded Micro & Small Enterprises shall upload valid MSME (UDYAM) registration certificate obtained from the competent authority certifying that Bidder is a Micro and Small Enterprises and Scanned copies of performance certificates in the name of Authorized Dealer or Distributor issued by an officer not below the rank of Executive Engineer or equivalent officer of the concerned Electricity Distribution companies or Government Electrical Utilities,PSUs shall be uploaded.
The Bidder should be in existence as any of the following.Company incorporated in India under the Companies Act,1956,2013 including any amendment thereto, b)LLP incorporated in India under the Limited Liability Partnership (LLP) Act, 2008 including any amendment thereto c)Partnership Firm under Partnership Act, 1932 in India d) Sole Proprietorship Concern.Documents to be uploaded.i. Certificate of Incorporation issued by Registrar of Companies as per Companies Act 1956,2013 along with Memorandum of Association and Articles of Association of the Company.ii. Declaration from Directors of the Company in MBP-1 Form stating that they are not disqualified to be a Director of the Company along with the list of Companies in which they are Directors as on the date of inviting tender (s).b)i. Certification of Incorporation issued by Registrar of Companies as per LLP Act 2008 ii)Limited Liability Partnership Agreement of LLP.a)i. Partnership Deed, GST Registration certificate.ii. Shops and Establishment Registration certificate, as applicable.b)PAN,GST Registration certificate.
The Bidder shall be a Manufacturer or Authorized Dealer or Distributor of safety equipment.Documents to be uploaded In case the Bidder is a Manufacturer, valid documentary proof such as license issued by Commerce and Industries department or any other Government Statutory Authority shall be uploaded. In case of Authorized Dealer or Distributor,a.Manufacturing license of Original Equipment Manufacturer b.Valid authorization letter from the Original Manufacturer assuring full guarantee, warranty as per the tender conditions, from the manufacturer shall be uploaded
The Bidder should have a minimum of 3 years works experience in Manufacturing or Supplying or Distribution of tendered safety equipment as on date of bid submission. Documents to be uploaded Scanned copy of Purchase order Order completion certificate issued by Electricity Distribution Companies or Govt. Electrical Utilities,PSUs, demonstrating experience of 3 years shall be uploaded
The bidder should have valid Bureau of Indian standard (BIS) certification for applicable equipments if BIS is not applicable than ISO certification shall be considered. Documents to be uploaded valid BIS or ISO shall be uploaded. Note Incase of authorised dealer or distributor BIS or ISO certification of OEM shall be uploaded.
The Bidder should have the valid type test certificates for having conducted all the type tests mentioned in the relevant IS technical specification on tendered type safety equipment at CPRI or ERDA and such type test certificates shall not be older than five years as on the last date of bid submission for applicable equipments if testing facilities are not available then only valid type test certificates NABL accredited Govt. labs testing shall be considered Documents to be uploaded The Bidder should have the valid type test certificates for having conducted all the type tests mentioned in the relevant IS technical specification on tendered type safety equipment at CPRI or ERDA such type test certificates shall not be older than five years as on the last date of bid submission for applicable equipments, if testing facilities are not available then only valid type test certificates NABL accredited Govt. labs testing shall be considered Note. In case of authorized dealer or distributor, type test certificates of OEM shall be uploaded
The Average Annual Financial Turnover of the Bidder shall not be less than the Amount Put to Tender However it will be 50per in respect of Micro & Small Enterprises during the preceding 3 financial years i.e., 2021-22 2022-23,2023-24 However, it will be last 2 years i.e 2022-23 & 2023-24 for Micro & Small Enterprises. Documents to be uploaded Certified copies of audited financial statements such as P&L statement, Balance sheets for the required FYs shall be uploaded
The Liquid Assets as on 31.12.2025 or at a later date before submission of the bid consisting of Cash at Bank plus Term Deposits plus availability of fund based credit facilities in any Nationalized, scheduled Bank shall not be less than 25per of the amount put to tender.Documents to be uploaded The cash at Bank, Bank Deposits and availability of fund based credit facilities shall be supported by a certificate issued by Nationalized,Scheduled Bank shall be uploaded. If the Bidder has banking with more than one Bank, then the available balance liquid assets mentioned above on a particular date i.e., as on the last date of previous month of tender inviting date or any date before submission of tender shall be the same date and time for all the banks In case of Fund Based credit facility, the certificate issued by Nationalized,Scheduled Bank duly mentioning sanctioned limits, funds utilized so far and balance available as on the last date of previous month of tender inviting date or at a later date, before submission of the bid shall be uploaded. The certificate shall be submitted in the format as per Annexure-
The bidder shall submit two samples of tendered materials confirming to the tender specifications to the office of Tender Inviting Authority (TIA) within due date and time notified for submission of bid.
The Bidder should not be under Default,Debarred,Blacklisted by any Electricity Distribution Companies or Govt. Electrical Utilities,PSUs, as on the date of bid submission Documents to be uploaded.Scanned copy of the self-declaration on notarized stamp paper of Rs.500 by the Bidder adhering to this clause shall be uploaded. The self-declaration shall clearly indicate the tender enquiry number and date on which declaration is done
Litigation History,The Bidder should provide detailed information on any litigation or arbitration arising out of contracts completed or under execution by it over the preceding five years, a consistent history of awards involving litigation against the Bidder or any partner may result in rejection of Bid. Documents to be uploaded. Scanned copy of the self-declaration on notarized stamp paper of Rs.500 shall be uploaded. The self-declaration shall clearly indicate the tender enquiry number and date on which declaration is done.
Any Bidder from a country which shares a land with India will be eligible to bid in this tender only if the Bidder is registered with the Competent Authority. As per Government Order No. FD 455 Exp-12, 2020 dated 25.08.2020.Documents to be uploaded. Scanned copy of Self-declaration on notarized stamp paper of Rs.500 shall be uploaded regarding Boarder sharing or not. If the Bidder is from a country which shares a land with India, Registration certificate issued by the competent authority shall be uploaded.The self-declaration shall clearly indicate the tender enquiry number and date on which declaration is done.
A certificate for having read the clauses is required to be submitted, uploaded by the Bidder separately in the following format, I have read the clause regarding restrictions on procurement from a Bidder of a country which shares a land border with India. I certify that this Bidder is not from such a country or, if from such a country, has been registered with the Competent Authority. I hereby certify that this Bidder fulfils all requirements in this regard and is eligible to be considered. Where ever applicable, evidence of valid registration by the Competent Authority shall be attached. Documents to be uploaded. Scanned copy of the self-declaration in the prescribed format as per Annexure II on notarized stamp paper of Rs.500 shall be uploaded. The self-declaration shall clearly indicate the tender enquiry number and date on which declaration is done
₹500
₹70,000
4 Feb 2026
28 Jan 2026
5 Feb 2026
31 Jan 2026
Ref No :- Dated :-
The Cbief General Manager, Ele,
BESCOM, K.R.Circle
Having Examined and understood the Terms and conditions of the Bid documents
and the Scope of Work in the Bidding documents issued under Enquiry No.
BESCOM/2025-26/IND00163/Call-3 for supply of High Visibility Reflective Jacket including any knowledged, addendum/ amendments(if any),the receipt of which is hereby duly acknowledged, we the undersigned, hereby submit the fully completed Bid Documents, which includes the a) EMD, b) Qualifying requirements c) Technical and Commercial details, and d) Price Bid in e-Procurement portal, for the said Materials/ Services.
We hereby agree to supply the materials in confirmity with the technical specification enumerated in the Bidding Documents, for the sum stated and quoted in the Bid or such other sums as may be ascertained in accordance We undertake, if our Bid is accepted, to execute the contract with in the stipulated time with the Schedule of Prices attached herewith and made part of the Bid.
We note that the prices offered are (as per the Bid stipulation) FIRM as per the commercial terms and conditions. We agree to keep this Bid valid for a period of 180 days from the date fixed for Bid opening and it shall remain binding upon us and may be accepted at any time before expiration of that period. We have paid EMD through e-payment
Until a formal contract is prepared & executed, this Bid together with your written
acceptance thereof in your notification of Award shall constitute a binding contract
Dated this day of 2025
Name in Block Letters
( in the capacity of )
Duly authorised to sign Bid for and on behalf of
Bangalore Electricity Supply Company Limited
Enquiry No. BESCOM/2025-26/IND0163/Call-3 for supply of High Visibility Reflective Jacket
No deviation certificate ( the bidder shall upload this certificate)
DECLARATION BY THE BIDDER
With reference to the bid proposal equiry No. BESCOM/2025-26/IND0163/Call-3 for supply of High Visibility Reflective Jacket we confirm that we have read the bid conditions and stipulations and all the clauses are acceptable to us and we have not taken any deviations whatsoever. Any deviations mentioned anywhere in the document shall be ignored.
Name of the Bidder:
Bangalore Electricity Supply Company Limited
Enquiry No. BESCOM/2025-26/IND0163/Call-3 for supply of High Visibility Reflective Jacket
QUALIFYING REQUIREMENT DETAILS
The bidder must upload relevant documents in support of qualifying requirements while submitting bid.
Name and address of Bidder:
QUALIFYING REQUIREMENT for Bidders Details of Documents uploaded against this QR must be indicated.
Technical Criteria
1 The Bidder should be in existence as any of the following: a) Company incorporated in India under the Companies Act, 1956/2013 including any amendment thereto; b) LLP incorporated in India under the Limited Liability Partnership (LLP) Act, 2008 including any amendment thereto; c) Partnership Firm under Partnership Act, 1932 in India; d) Sole Proprietorship Concern
Documents to be uploaded:
a) i. Certificate of Incorporation issued by Registrar of Companies as per Companies Act 1956/2013 along with Memorandum of Association and Articles of Association of the Company. ii. Declaration from Directors of the Company in MBP-1 Form stating that they are not disqualified to be a Director of the Company along with the list of Companies in which they are Directors as on the date of inviting tender (s). b) i. Certification of Incorporation issued by Registrar of Companies as per LLP Act 2008. ii. Limited Liability Partnership Agreement of LLP. c) i. Partnership Deed, GST Registration certificate. ii. Shops & Establishment Registration certificate, as applicable. d) PAN/GST Registration certificate
2 The Bidder shall be a Manufacturer / Authorized Dealer / Distributor of safety equipment
Documents to be uploaded:
1. In case the Bidder is a Manufacturer, valid documentary proof such as license issued by Commerce & Industries department or any other Government Statutory Authority shall be uploaded. 2. In case of Authorized Dealer/Distributor: a. Manufacturing license of Original Equipment Manufacturer. b. Valid authorization letter from the Original Manufacturer assuring full guarantee/warranty as per the tender conditions, from the manufacturer shall be uploaded.
3 The Bidder should have a minimum of 3 years works experience in Manufacturing/ Supplying/Distribution of tendered safety equipment as on date of bid submission.
Documents to be uploaded:
Scanned copy of Purchase order/Order completion certificate issued by Electricity Distribution Companies or Govt. Electrical Utilities/PSUs, demonstrating experience of 3 years shall be uploaded.
4 1. In case of Original Manufacturer: The Bidder should have manufactured, tested and supplied at least 80% (40% in respect of Micro & Small Enterprises) of the tendered quantity of safety equipment in the preceding 3 years i.e., 2022-23, 2023-24 & 2024-25 (last 2 years i.e., 2023-24 & 2024-25 for Micro & Small Enterprises) to Electricity Distribution companies or Government Electrical Utilities/PSUs. 2. In case of Authorized Dealer / Distributor a. The Original Manufacturer should have manufactured, tested and supplied at least 80% (40% in respect of Micro & Small Enterprises) of the tendered quantity of tendered type safety equipment in the preceding 3 years i.e., 2022-23, 2023-24 & 2024-25 (last 2 years i.e., 2023-24 & 2024-25 for Micro & Small Enterprises) to Electricity Distribution companies or Government Electrical Utilities/PSUs. and b. The Authorized Dealer / Distributor should have supplied at least 30% of the tendered quantity tendered type safety equipment in the preceding 3 years i.e., 2022-23, 2023-24 & 2024-25 to Electricity Distribution companies or Government Electrical Utilities/PSUs
Documents to be uploaded:
1. In case of OEM: Scanned copies of Order completion certificates (in the name of Original Manufacturer) issued by an officer not below the rank of Executive Engineer or equivalent officer of the concerned Electricity Distribution companies or Government Electrical Utilities/PSUs shall be uploaded. Micro & Small Enterprises shall upload valid MSME (UDYAM) registration certificate obtained from the competent authority certifying that Bidder is a Micro and Small Enterprises. 2. In case of Authorized Dealer / Distributor a. Scanned copies of Order completion certificates (in the name of Original Manufacturer) issued by an officer not below the rank of Executive Engineer or equivalent officer of the concerned Electricity Distribution companies or Government Electrical Utilities/PSUs shall be uploaded. Micro & Small Enterprises shall upload valid MSME (UDYAM) registration certificate obtained from the competent authority certifying that Bidder is a Micro and Small Enterprises. and b. Scanned copies of Order completion certificates (in the name of Authorized Dealer / Distributor) issued by an officer not below the rank of Executive Engineer or equivalent officer of the concerned Electricity Distribution companies or Government Electrical Utilities/PSUs shall be uploaded.
5 In case of Original Manufacturer: The Bidder shall have performance certificate issued by any Electricity Distribution Companies or Govt. Electrical Utilities/PSUs for having satisfactory operation for Preceding 3 years i.e., 2022-23, 2023-24 and 2024-25 as on the date of bid submission for minimum of 80% (40% in respect of Micro & Small Enterprises) of tendered quantity tendered type safety equipment. 2. In case of Authorized Dealer / Distributor a. The Original Manufacturer should have performance certificate issued by any Electricity Distribution Companies or Govt. Electrical Utilities/PSUs for having satisfactory operation for Preceding 3 years i.e., 2022-23, 2023-24 and 2024-25 as on the date of bid submission for minimum of 80% (40% in respect of Micro & Small Enterprises) of tendered quantity of tendered type safety equipment. And b. The Authorized Dealer / Distributor should have performance certificate issued by any Electricity Distribution Companies or Govt. Electrical Utilities/PSUs for having satisfactory operation for Preceding 3 years i.e., 2022-23, 2023-24 and 2024-25 as on the date of bid submission for minimum of 30% of tendered quantity of tendered type safety equipment.
Documents to be uploaded:
1. In case of OEM: a. Scanned copies of the performance certificates (in the name of OEM) issued by an officer not below the rank of Executive Engineer or equivalent officer of the concerned Electricity Distribution companies or Government Electrical Utilities/PSUs shall be uploaded. Micro & Small Enterprises shall upload valid MSME (UDYAM) registration certificate obtained from the competent authority certifying that Bidder is a Micro and Small Enterprises. 2. In case of Authorized Dealer/ Distributor a. Scanned copies of performance certificates (in the name of Original Manufacturer) issued by an officer not below the rank of Executive Engineer or equivalent officer of the concerned Electricity Distribution companies or Government Electrical Utilities/PSUs shall be uploaded. Micro & Small Enterprises shall upload valid MSME (UDYAM) registration certificate obtained from the competent authority certifying that Bidder is a Micro and Small Enterprises. and Scanned copies of performance certificates (in the name of Authorized Dealer / Distributor) issued by an officer not below the rank of Executive Engineer or equivalent officer of the concerned Electricity Distribution companies or Government Electrical Utilities/PSUs shall be uploaded.
6 The Bidder should have valid Bureau of Indian standard certification for applicable equipment’s if BIS Certification is not applicable than only ISO Certification shall be considered.
Documents to be uploaded:
If applicable Valid BIS certificates shall be uploaded, if BIS Certification is not applicable than only ISO Certification shall be uploaded. Note: In case of authorized dealer/distributor BIS/ISO certificate of OEM shall be uploaded.
Financial Criteria:
7 The Bidder should have the valid type test certificates for having conducted all the type tests mentioned in the relevant IS/technical specification on tendered type safety equipment at CPRI/ERDA & such type test certificates shall not be older than five years as on the last date of bid submission for applicable equipment’s if testing facilities are not available, then only valid type test certificates NABL accredited Govt. labs testing shall be considered.
Documents to be uploaded:
The Bidder should have the valid type test certificates for having conducted all the type tests mentioned in the relevant IS/technical specification on tendered type safety equipment at CPRI/ERDA & such type test certificates shall not be older than five years as on the last date of bid submission for applicable equipment’s if testing facilities are not available, then only valid type test certificates NABL accredited Govt. labs testing shall be considered. Note: In case of authorized dealer/distributor, type test certificates of OEM shall be uploaded.
8 The Bidder shall submit two samples of tendered material, confirming to the tender specifications to the office of the tendered inviting authority within the due date and time notified for submission of bid.
Documents to be uploaded:
The submitted samples shall confirm to the said specifications.
Financial Criteria:
9 The Average Annual Financial Turnover of the Bidder shall not be less than the Amount Put to Tender (However it will be 50% in respect of Micro & Small Enterprises) during the preceding 3 financial years i.e., 2021-22, 2022-23 and 2023-24 (However, it will be last 2 years i.e., 2022-23 and 2023-24 for Micro & Small Enterprises).
Documents to be uploaded:
Certified copies of audited financial statements such as P&L statement, Balance sheets for the required FYs shall be uploaded.
10 The Liquid Assets as on 31.12.2025 at a later date before submission of the bid consisting of Cash at Bank + Term Deposits + availability of fund based credit facilities in any Nationalized/scheduled Bank shall not be less than25% of the amount put to tender.
Documents to be uploaded:
The cash at Bank, Bank Deposits and availability of fund based credit facilities shall be supported by a certificate issued by Nationalized/ Scheduled Bank shall be uploaded. If the Bidder has banking with more than one Bank, then the available balance liquid assets mentioned above on a particular date i.e., as on the last date of previous month of tender inviting date or any date before submission of tender shall be the same date and time for all the banks. In case of Fund Based credit facility, the certificate issued by Nationalized/ Scheduled Bank duly mentioning sanctioned limits, funds utilized so far and balance available as on the last date of previous month of tender inviting date or at a later date, before submission of the bid shall be uploaded. The certificate shall be submitted in the format as per Annexure-I
11 The Bidder should not be under default / debarred/ blacklisted by any Electricity Distribution Companies or Govt. Electrical Utilities/ PSUs, as on the date of bid submission.
Documents to be uploaded:
Scanned copy of the self-declaration on notarized stamp paper of Rs.500/- by the Bidder adhering to this clause shall be uploaded. The self-declaration shall clearly indicate the tender enquiry number and date on which declaration is done.
12 Litigation History: The Bidder should provide detailed information or arbitration arising out of contracts or under execution by it over the preceding five years, A consistent history of awards involving litigation against the Bidder or any partner may result in rejection of Bid.
Documents to be uploaded:
Scanned copy of the self-declaration on notarized stamp paper of Rs.500/- shall be uploaded. The self-declaration shall clearly indicate the tender enquiry number and date on which declaration is done.
13 Any Bidder from a country which shares a land with India will be eligible to bid in this tender only if the Bidder is registered with the Competent Authority. (As per Government Order No. FD 455 Exp-12/2020 dated 25.08.2020.)
Documents to be uploaded:
Scanned copy of Self-declaration on notarized stamp paper of Rs.500/- shall be uploaded regarding Boarder sharing or not. If the Bidder is from a country which shares a land with India, Registration certificate issued by the competent authority shall be uploaded. The self-declaration shall clearly indicate the tender enquiry number and date on which declaration is done.
14 A certificate for having read the clauses is required to be submitted/uploaded by the Bidder separately in the following format: I have read the clause regarding restrictions on procurement from a Bidder of a country which shares a land border with India. I certify that this Bidder is not from such a country or, if from such a country, has been registered with the Competent Authority. I hereby certify that this Bidder fulfils all requirements in this regard and is eligible to be considered. (Where applicable, evidence of valid registration by the Competent Authority shall be attached.)
Documents to be uploaded:
Scanned copy of the self-declaration in the prescribed format as per Annexure II on notarized stamp paper of Rs.500/- shall be uploaded. The self-declaration shall clearly indicate the tender enquiry number and date on which declaration is done.
Note: The self-declaration for QR 8,9,10, 11 & 12 may be provided on a single notarized stamp paper of Rs.500/-
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
5 SEC-V Delivery Schedule Call-3.docx
Schedule of Delivery • 0.05 MB
2 SEC-II ITB instruction forBidders Call-3.doc
Instructions to Tenderers • 0.23 MB
4 SEC IV - SCC Call-3.docx
Tender Document • 0.06 MB
7 SEC-VII Techno-commercial sheets Call-3.xls
Techno-Commercial Worksheet • 0.06 MB
8 Technical specification Reflective Jackets.pdf
Technical Information / Worksheet • 1.87 MB
3 SEC - III GCC Call-3.doc
Tender Document • 0.07 MB
6 SEC-VI A ANNEXURES QR 11 12 13 14 Call-2.docx
Others - Annexures • 0.02 MB
1 SEC-I IFB invitation for Bids Call-3.docx
Tender Document • 0.04 MB
Liquid Asset Format Annexure-I.pdf
Others - format • 0.05 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .