Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.4 LAccepted-AOC AT KAMAL KRUSHNA NIVAS NEAR BANK OF INDIA WARD NO 2 GHUGUS TA DIST CHANDRAPUR GHUGUS 442505 | GHUGUS | CHANDRAPUR | MAHARASHTRA | 442505 | ₹1.4 L | L1 | Accepted-AOC L1 bidder |
| 2 | L2₹1.4 LRejected-Finance AT POST GHUGUS TAH DIST CHANDRAPUR GHUGUS 442505 | CHANDRAPUR | MAHARASHTRA | 442505 | ₹1.4 L | L2 | Rejected-Finance Not Lowest Bidder |
| Sl No | Description | Qty | Unit | SANTOSH R VARMA L1 | UMESH K. GUPTA L2 |
|---|---|---|---|---|---|
| 1.00 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. | 1.3 | cum | 298 ₹387.4 | 160 ₹208 Lowest |
| 2.00 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | 0.25 | cum | 2,000 ₹500 | 1,500 ₹375 Lowest |
| 3.00 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 1.1 | cum | 3,490 ₹3,839 Lowest | 5,000 ₹5,500 |
| 4.00 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 810 | kg | 72 ₹58,320 Lowest | 78 ₹63,180 |
| 5.00 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 109 | sqm | 494 ₹53,846 | 460 ₹50,140 Lowest |
| 6.00 | Total impact of GST for the purpose of CTC | 1 | Nos | 21,040.63 ₹21,040.63 Lowest | 21,492.54 ₹21,492.54 |
Tender Value
₹2.0 L
EMD Value
₹2,500
Closing Date
3 Jun 2025, 12:00 pmClosed
Abhishek Gupta
NEELJAY SUB AREA
Providing G. I. shelter for temporary Substation at Naigaon Deep OCM under Neeljay Sub Area of Wani Area.
2025_WCL_335743_1
WCL wa4310-Civ-e02-2025-26/99
Open Tender
Civil Works - Others
Fixed-rate
15 days
NEELJAY
Please refer Tender documents.
3 documents required · 3 mandatory
₹2,500
23 Aug 2026
20 May 2025
4 Jun 2025
20 May 2025
3 Jun 2025
20 May 2025
20 May 2025 - 28 May 2025
Amount
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
Total impact of GST for the purpose of CTC
UMESH K. GUPTA (BID ID -1156894)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_348040.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].