CERTAIN REPAIR TO MD ACCN OF ALBERT EKKA AND NIRMAN ENCLAVE UNDER AGE B/R-II AT NAMS

Amount

Taking down cement plaster on brick/stone/concrete walls /ceiling incl racking out joints etc,hacking for key, scrubing down with water etc & dispose off debris upto a distance n exc. 500 mtrs where directed complete all as specified and directed.note -rate applicable upto four storey height incling all scaffolding work

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4. finishing even and fair complete all as specified and directed. (WPC shall be measuared seperatly and paid @ 200ML for 50kg cement bags or as per manufacturer's instructions). note -rate applicable upto four storey height incling all scaffolding work

M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces on walls in CM 1:6. finishing even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces on ceiling in CM 1:3. finishing even and smooth without using extra cement complete all as specified and directed.

M&L for applying two coat of Acrylic smooth exterior emulsion paint over a coat of exterior primer including preparation of newly plasterd surfaces of walls, pillars cornices etc complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L for preparation of newly plastered surface of walls and applying two coat of oil bound distemper over a coat of chalk whitening over newly plastered surfaces of walls, pillars cornices etc complete all as specified and directed.

M&L for applying three coat of white wash on ceiling surfaces incl preparation of newly plastered ceiling surfaces complete all as specified and directed.

M&L for applying one coat of Acrylic smooth exterior emulsion paint on walls, pillars cornices etc surface incl preparation of old plastered/painted surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and incl filling holes necessary where required with putty as in pathces or nail holes to obtain smooth finish using sand paper and matching the existing surface complete all as specified and directed.

M&L for applying one coat of oil bound distemper on walls, pillars cornices etc surface incl preparation of old plastered/painted surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss incl filling holes necessary where required with putty as in pathces or nail holes to obtain smooth finish using sand paper and matching the existing surface complete all as specified and directed. complete all as specified and directed.

M&L for Prepration of old surfaces of ceiling includinng scrapping down smoke ,soot,and efflorescence salts and treading oil and gresy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on old plastered/painted surfaces and applying one coat of white wash on ceiling surface incl filling holes necessary where required with putty as in pathces or nail holes to obtain smooth finish using sand paper and matching the existing surface complete all as specified and directed.

M&L for wall care putty of 1mm thickness over plastered/Unplastered surface to prepare the surface even and smooth complete all as specified and directed. Note-Entire spalashes in floor shall be cleaned immediately after completion of periodical services.

M&L for applying one coat of synthetic enamel paint on wooden surface of any description over 10cm width or girth including preparation of old surfaces complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint on steel surface of any description over 10cm width or girth including preparation of old surfaces complete all as specified and directed.

Taking down Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each complete all as specified and directed

Taking down Chowkats or frames from the opening of size exceeding 1.5 but n exc 4 sqm sqm each with shutters ( without taking off shutters from the frames) complete all as specified and directed

Taking down Chowkats or frames from the opening of size not exceeding 1.5 sqm each with shutters ( without taking off shutters from the frames) complete all as specified and directed

S&F 35mm thick Flush shutters , solid core construction , with block board core and plywood face panels, commercial type on both sides Complete all as specified and directed. ISI Marked.

S&F IInd class hard wood Glazed and skeleton shutters 35mm thick divided into square, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a) ; supplied and fitted to chowkats complete all as specified and directed

S & F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour 5mm thick PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawaing complete all as specified

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.

S&F MS framed work as in door or gates of angle or other section with gusset plates,rail, braces,etc and similar work conform-ing to Fe 290Gde E-165 complete.

Material & labour for two coats of synthetic enamel painting over a coat of red oxide to new steel or steel based surfaces of any description, over 10 cm width or girth, including preparation of surfaces complete all as specified and directed.

S&F 150 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed

S&F 150 mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed

S&F 100mm long butt Hinges, medium weight, cold rolled mild steel and fixed complete all as specified and directed.

S&F 250mm long Aluminium alloy Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed

S&F GI wire cloth, 0.56 mm nominal dia. of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed

S&F in repairs GI wire cloth, 0.56 mm nominal dia. of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed

Hacking out old broken glass (any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins / spring clips and providing and fixing new ones at any height including required scaffolding work complete all as specified and directed

S&F Sheet glass, 3mm thick ordinary quality, in squares, not exceeding 0.50 sqm in each pane including wooden beading fixed nails complete all as specified and directed Note upto four storey height including all scaffolding work

Description all as per Srl item No 31.00 above but figured glass pin head type & glazing with oil putty Note upto four storey height including all scaffolding work complete all as specified and directed

Material & labour for two coats of synthetic enamel painting over a coat of pink primer to new wood or wooden based surfaces of any description, over 10 cm width or girth, including preparation of surfaces complete all as specified and directed.

M&L for 18-20mm thick plywood of grade BWP, both sides balancing white/coloured lamination of mica,fixed in partitions/shutter of almirah,shelves vertical and horizontal to match design including stainless steel brackets/cleat to support with wall and plywood including demolition/dismantling of decayed plywood complete all as specified and directed.

S&F 100 mm long Hasp and staple , safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing rubbish off the premises.

S&F non skid ceramic coloured tiles 7 to 8mm thick (square) size of each tile 400x400mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured pigment to match the shade of tile over and including 15mm thick screed bed in CM 1:6 & complete all as specified and directed.

S&F non skid ceramic coloured tiles as in vertical surface for skirting 7 to 8mm thick (square) size of tile 400x400mm in floors etc set and jointed in neat cement slurry and pointed in vertical surfaces white or coloured pigment to match the shade of tile over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

S&F non skid ceramic coloured tiles 7 to 8mm thick (square) size of tile exceeding 300x300mm in floors etc set and jointed in neat cement slurry and pointed inwhite or coloured pigment to match the shade of tile over and including 15mm thick screed bed in CM 1:6 & complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 450mm x 300mm x 7-8mm thick as in vertical portion such as dado,skirting,riser to steps etc with highlighter border, set & jointed in neat cement slurry and pointed in white or coloured pigment to match the shade of tile over and including rendering 10mm thick in cement mortar (1:4) , complete all as specified and directed.

Supply and fixing vitreous china squatting pan ( Orissa Pattern) size 580 x 440 mm (white), with PVC (SWR) P trap, integral foot rest including water connection to trap and flushing pipe, flushing cistern etc complete and bedding in PCC 1:7:12 type F-2 including taking down/dismantling old unserviceable WC complete all as specified. Note :- Flush pipe and flushing cistern to be measured and paid separately.

S&F in repairs vitreous china wash down water closet pan pedestal pattern white including fixing bolts and seat cover white for pedestal pan with flat bottom and cover and mild steel chromium plated hinging device (excluding flushing cistern and flush pipe).

S&F in repair vitreous China wash basin white, flat back size 550x400mm including CP waste coupling 32mm bore, complete all as specified.

S&F in repair 10 Ltr capacity PVC valveless symphonic action type flushing cistern white low level with ball valve flote handle including bracket and flush pipe of polythylene of low or high density or PVC,32mm dia complete all as specified and directed Note flush tank can be conceiled in wall if reqd i.e in the case of wall hung type water closet pan

S&F rotational moulded polythene, triple layers, water storage tank other than black colour 500 Ltr capacity, closed top, cylindrical, hoisted and fixed in position including including 20mm bore PTMT ball valve epoxy coated minium weight 210gms with aluminium rod and dismantling water tanks Exc 250 Ltr & not exceeding 500Ltr complete all as specified and directed

Taking down PE-AL-PE composite pipes 15/20mm bore concealed/any type including connections complete all as specified and directed by Engr-In-charge.

Taking up or down 15mm dia steel tubing and connections incl cleaning for refixing or removal to store all as specified and directed.

S&F 15mm dia GI tubes medium grade with all fitting and fixed complete to walls and ceiling or laid in floors all as specified and directed.

Taking up or down 20mm dia steel tubing and connections incl cleaning for refixing or removal to store all as specified and directed.

S&F 20mm dia GI tubes medium grade with all fitting and fixed complete to walls and ceiling or laid in floors all as specified and directed.

S/F in repair 15mm bore stop cock cast copper alloy CP screwed down high pressure with crutch or butterfly handle complete all as specified and directed.

S/F in repair 20mm bore stop cock cast copper alloy CP screwed down high pressure with crutch or butterfly handle complete all as specified and directed. .

S&F in repair of brass cromium plated fancy type bib taps 15 mm bore long nose screwed down screwed for iron pipe or for brass complete all as specified and directed

S& F for in repair swan neck pillar cock brass chromium plated fancy type screw for 15mm bore iron pipe complete all as specified and directed.

S&F in repair 15mm bore Stop valves, cast copper alloy, screwed down , high pressure, with crutch or butterfly handles , screwed both ends for iron pipe or for unions, fancy type, chromium plated with long shank and cup ( concealed type) and fixed.

Supply and fix in repair CP flushing jet including 15mm bore 450mm long PVC pipe connection for Europian type closet of suitable length with brass check nut complete all specified and directed

Supply and fixing in repair PVC waste pipe 32/38/40mm dia, 600 to 750mm long complete all as specified.

S&F PVC connection 15mm size with PTMT nuts of length 450mm.complete all as specified

S and F in reoair brass chromium plated tubular towel rail D type 60cm long between flanges including bracket complete all as specified

Supply and fixing chromum plated towel ring with round flange 164x53x45mm and 8mm thick incl taking down old u/s any type ring etc complete all as specified and directed.

S&F curtain rod 25mm bore of 1mm wall thickness made off stainless steel fancy type decorativewith decorative ball type side brackets and knobs including taking down old any type curtain rod complete all as specified and directed.

S&F in repair sinks with drainage board made of 1mm thick stainless steel sheet for kitchen or laboratory with plugs, washers,wastes coupling,waste pipe including bedding in cement mortar on to wall or including fixing cantilever brackets or chase cut and fixing the sides as required as per site complete with overall size 915mmx460mm bowl size 410mmx330mmx160mm complete all as specified and directed.

S&F in repair stainless steel kitchen plate rack size 750mm X750mmx250mm deep made of stainless steel ,weight not less than 7.5 kg with folded edges glossy finish complete all as specified and directed.

S&F in repair 32mm bore CP bottle trap for wash hand basin with inlet and outlet screwed for iron pipe or connections including necessary packing,union and cap complete all as specified and directed.

Mechanized cleaning and disinfection of Water Storage Tank of 500 ltr capacity : 1. Mechanized Dewatering of water storage tank. 2.Removal of sluge laying on the bottom ofwater storage tank through special sludge pumps. 3.Cleaning of internal walls of water storage tank through High Pressure rotary Jets 4.Vaccum cleaning of the floor of water storage tank through industrial vaccum cleaners. 5.Spray of H2 O2 inside the tanks as an antibecterial agent. 6. UV radiation of the tank. 7.Spray of bleaching powder in prescribed quantity after final cleaning of the tank. Note writing the date of cleaning of tank with synthetic enamel (black/white) paint of size not less than 10cm of each letter complete, all as specified and directed.

Taking down eaves gutters and rain water pipes ( any size or pattern) , including all fittings , heads, shoes, bends, swan necks, etc., ( measured overall as fixed along the centre line over fittings and accessories

S&F 110mm bore PVC(SWR) pipes single socketed in any length fixed to walls with dash true nut and bolt at every 2mtr length including all fittings complete all as specified and directed by Engineer-in-charge

S&F 75mm bore PVC(SWR) pipes single socketed in any length fixed to walls with dash true nut and bolt at every 2mtr length including all fittings complete all as specified and directed by Engineer-in-charge

S&F 110mm bore PVC (SWR) bends any radius Withiout access door

S&F 75mm bore PVC (SWR) bends any radius Without access door

S&F 110mm bore PVC (SWR) junction single/double, (single/double T), equal or unequal .

S&F 75mm bore PVC (SWR) junction single/double, (single/double T), equal or unequal .

M&L 75mm bore PVC (SWR) floor trap ,plain with CP grating including jointing with solvent cement

Demolition of cement Concrete in sunken floors exc 15cm thick ( above ground level) and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas complete all as specified and directed

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4 with water proofing compound, finishing even and smooth without using extra cement complete all as specified and directed

Supply only liquid water proofing compound.

M&L for Cement concrete 1:5:10 type E-2 (using 40mm graded stone aggregates) as in foundations, filling and mass concrete complete all as specified and directed

M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregates) as in sub base complete all as specified and directed

Supply and fix sheet glass shelf assembly consisting of 5.50mm thick sheet glass shelf 12cm wide with cromium plated bracket guard and and railing 60cm long including taking down old broken glass shelf, if available, complete all as specified.

Dismantling of brick tiles single layer on roof, jointed and grouted/pointed in cement mortar including cleaning serviceable tiles and stacking properly for reuse, disposal of unserviceable tiles and debries/rubbles from site complete all as specified and directed.

Demolition of Mud in roofs , any thickness,including plastering and leeping (whether full thickness removed or only a part thereof complete all as specified and directed.

M & L for PCC (1:2:4) type B-1 (20 mm graded stone aggregates) as in roof kerbs, sloping padding in roof slab or mud stops, rounded or chamfered on edges

M & L for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm including cleaning surfaces etc including APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on roof and sunken portion on bitumen surfaces by forced application including chase cutting in roof and making good with CM(1:4) complete complete all as specified and directed.

M&L for 40 mm thick brick tiles laid over 15 mm thick screed bed in cement mortar 1:6 and jointed, grouted flush in cement mortar 1:3 mixed 5% of crude oil of by weight of cement on roof padding flush pointing in CM 1:3 complete all as specified and directed

Description all as per item No 85.00 above but except tiles.

S&F Sheet glass, 4mm thick ordinary quality, in squares,exceeding 0.50 sqm in each pane including rubber packing and aluminium beading with glass panes as per instructions of manufacturer complete all as specified and directed

Material & labour for box type steel window 1.25 mm thick made of ERW tube P-Section of size 60 x 25 mm double rebated outer frame comprise of glazed skeleton shutter(two gauged shutters and two glazed shutter) of ERW tube P-Section size 50 x 20 mm and 1mm thick one/two Nos openable leaf consisting of two Nos sash bar of T-Section 20x3mm welded to frame with one No Vertical mullion of ERW box type T-Section of size 60 x 25 mm and 1.25 mm thick and FI 2 mm thick welded / screwed to frame for fixing of glass including fittings and fixture like Handle, Tower Bolt, stopper, cleat, pintal hinges, hold fast etc. (a) Hold Fast, 150mm long of 120mm x 3 mm made to shape -04 Nos per window. (b) Handle of Z sec 20mm x 25mm, 100 mm long -1 No per leaf (c) MS Tower bolt 150mm long - 2 No per leaf (d) Z Sec 20mm x 25 mm, 100 mm long stopper - 1 No per leaf (e) Cleat 55 mm long of hollow square 15mm x 20mm x.63mm welded to hinge -1 No per leaf. (f) MS Pintal hinges of size 75mm x 12mm - 2 Nos per leaf (g) 12 mm square guard bar, 10 cm centre to centre.

(h) 25x4 mm flat iron all around for joint of both frame. (j) One shop coat of red oxide primer and two coats of Synthetic enamel paint to MS window and guard bar Note: (i) Including taking down old steel window and making good dismantled portion with PCC 1:2:4 type B0 including hold fast PCC (four No’s for Each window) & around required plaster in CM 1:4 and match with existing finishing complete all as specified and directed by Engineer-in-charge. (ii) sheet glass and wire mesh shall be measured and paid separately)

Material and Labour for Box type steel ventilator made of ERW tube P-section of size 60mmx25mm outer frame ( single rebated)of ERW tube and FI 2mm thick welded/screwed to frame for fixing of sheet glass including fixture and fittings like as Stopper, Cleat, Pintal hinges, holdfast etc all as shown on drg No CEJZ/TD1019/08 sheet 1/3 to 3/3 dt 01 May 2008 complete all as specified. (a)10mm Sq Guard bar 10Cm C/C (b) One shop coat of red oxide primer and two coats of Synthetic Enamel piant to MS ventilator and guard bar Note:- (i) Including taking down old steel window and making good dismantled portion with PCC 1:2:4 type B-0 including hold fast PCC (four No’s for Each ventilator) & around required plaster in CM 1:4 and match with existing finishing complete all as specified and directed by Engineer-in-charge. (ii) sheet glass and wire mesh shall be measured and paid separately)

S&F rotational moulded polythene, triple layers, water storage tank other than black colour 1000 Ltr capacity, closed top, cylindrical, hoisted and fixed in position including including 20mm bore PTMT ball valve epoxy coated minium weight 210gms with aluminium rod and dismantling water tanks Exc 500 Ltr & not exceeding 100Ltrcomplete all as specified and directed

M/s Vijay Construction Co. (BID ID -3136120)

Santokh Singh and Associates (BID ID -3136224)

BISHAN DASS (BID ID -3136605)