Renovation of IPU at 3rd floor of Satsang Vihar Marg CSIR- NISCAIR Building New Delhi-110016.

Amount

Sub Head-1 ( Civil Work )

Carriage of material by mechanical transport including loading, unloading and stacking out side municipal limits upto lead of 20 KM . Lime, morum, building rubbish .

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form for all heights :

Shelves (Cast in situ)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.

Half brick masonry with common burnt clay F.P.S ( non modular ) bricks of class designation 7.5 in superstructure above plinth level upto floor V level. Cement Mortar 1:4( 1 cement : 3 coarse sand)

Extra for providing and placing in position 2 nos. 6mm dia M.S. bars at every third course of half brick masonry.

Providing and fixing 16mm to 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for lift lobby cladding, kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels. Granite of any colour and shade.

area of slab up to .50 sqm

Area of slab over .50 sqm

Providing edge moulding to 16 to18mm thick marble stone counters, vanities etc including Machine polishing to edge to give high gloss finish etc complete as per design approved by Engineer-in-Charge. Granite work.

Extra for fixing marble / grenite stone over and above corresponding basic item in facia and drops of width upto 150mm with epoxy resin based adhesive , including cleaning etc. Complete.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia & length ( hold fast lugs or dash fastener shall be paid for seperately ) : Second class teak wood

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : 30 mm thick including ISI marked stainless steel but hinges with necessary screws .

Extra for providing lipping with 2nd class teak wood battens 25mm minimum depth on all edges of shutters (overall area of door shutter to be measured)

Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with Decorative veneer facings of approved manufacture

Providing and fixing IS : 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete.

Providing and fixing aluminium tower bolts ISI marked anodised(anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :

Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling

channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, Galvanised M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each with zinc coating of 120 gms/sqm(both side inclusive)) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all complete.75 mm overall thickness partition with 12.5 mm thick double skin fire rated Glass Reinforced Gypsum (GRG), plaster board conforming to IS: 2095: (part 3) 1996 (Board with BIS Certification marks).

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.00mm thick

Providing & fixing fly proof wire gauze to Aluminium windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides

Providing and laying polished Vitrified Dual Charged tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved brand and manufacturer, in all colours & shade, in skirting , riser of steps , laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS 15477 in average 6mm thickness including grouting of joints (payment for grouting of joints to be made seperatly). Size of tile upto 600x600mm

Providing and laying Vitrified Dual Charged tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.(approved make superem/phenolux or equivalent.(Pressure 6kg sqcm)

Single tee with door110x110x110 mm

Bend 87.5°(PVC Elbow)110 mm bend

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction,

including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS Certification marks)

Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings,fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.

Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.

12mm cement plaster of mix: 1:4 (1 cement :4 coarse sand)

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete

Applying one coat of cement primer of approved brand and manufacture on wall surface :Cement Primer

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with acrylic emulsion paint ,having VOC (volatile organic compound ) content less than 50 grams/ litre of approved brand and manufacture including applying additional coats of whereever required, to achive even shade and colour.Two Coats

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. One or more coats on old work

Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead. With cement mortar 1:4 (1cement :4 coarse sand)

Providing and fixing 150mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete

Providing and fixing bright finished brass hard drawn hooks and eyes: 250 mm

Demolishing Brick work manually / by machanical means including stacking of servicable material and disposal of unserviceable material within 50 metre lead as per direction of EIC. In cement mortar

Taking out doors, windows and clerestory window shutters (steel or wood or aluminium) including stacking within 50 metres lead :

Of area 3 sq. metres and below

Of area beyond 3 sq. metres

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metre lead for thickness of tile 10mm to 25mm

Dismantling wooden boardings in lining of walls partitions thickness upto 10mm to 25mm

Dismantling cement asbestos, gypsum ceiling, wall /Aluminium stripes ceiling or other hard board ceiling or aluminium and wooden partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead.(Note: Nothing extra will be paid for shifting / loading /unloading of the dismantaled material from third floor to ground floor of the office building.)

Dismantling GI pipes ( external work ) including excavation and refilling trenches after taking out the pipes , mannually by machanical means including stacking of pipes within 50metres lead as per direction Engineer in charge. 15mm to 40 mm nominal bore

Dismantling of flushing cistern/wash basin /EWC of any size including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Providing and fixing white vitreous china flat back half stall urinal of size 590x375x390 mm with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required .

Providing and fixing 8mm dia C.P./ S.S. Jet with flexible tube upto 1 metre long with S.S triangular plate to european type W.C. of Quality and make as approved by Engineer-in-charge.

providing and fixing CP brass toilet paper holder

Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 260gms.

Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour. weighing not less than 105 gms.

Providing & Fixing PTMT towel rail complete with brackets fixed to wooden cleats with C.P. brass screws with concealed fittings arrangements of approved quality colour. 600mm long towel ril with total lenghth of 645mm, width 78mm and effective height of 88mm, weighing not less than 190 gms. dash fastener drilling etc. complete with All respect as per direction of Engineer in Charge

Providing and fixing infrared sensor for urinal having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side,including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-incharge.

Providing and fixing Chlorinated polyvinyl Chloride (CPVC) pipes , having thermal stability for hot and cold water supply , including all CPVC plain & threaded fittings , i/c fixing the pipe with clamps at 1m spacing . This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in charge. Concealed work , including cutting chasis and making good the walls etc .

15mm nominal bore outer dia pipe

32mm nominal bore outer dia pipe

Providing and fixing C.P. brass long body bib cock of approved quality (jaquar make or equivalent) conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore

Providing & Fixing C.P. brass angle valve for basin mixer and geyser points of approved quality (jaquar make or equivalent) conforming to IS 8931 - 15 mm nominal bore

Providing and fixing C.P brass extention nipple ( size 15mmx50mm) of approved make and quality as per direction of EIC.

Providing & Fixing PTMT grating of approved quality and colour, Circular type 100 mm Dia. Nominal bore

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and paneling to be paid for separately) :

For fixed portion Powdwer coated aluminium (minimum thickness of powder coating 50 micron)

For shutters of doors, windows' & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost pvc neoprene gasket required (Fittings shall be paid for separately). Powdwer coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) ( Make : Saintgobain/Modi Guard/AIS)

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand & manufacture including providing & fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete. as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). ( Make : Saintgobain/Modi Guard/AIS)

Providing and fixing Ist quality ceramic glazed (digitally printed, DGVT) wall tiles of size up to 600x450mmconforming to IS : 15622 (thickness to be specified by the manufacture ) of approved make in all colours, shades except burgundy , bottle green, black of size 600x300mm (digital printed) as approved by Engineer-in-Charge in walls, skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.( Make : Orient/Kajaria/Nitco)

Providing and laying Ceramic glazed floor tiles upto size 450x450 mm(digital printed) (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete. ( Make : Orient/Kajaria/Nitco)

Providing and fixing white / Ivory vitreous china wall hung type water closet with seat and lid, 10 litre low level white vitreous china flushing cistern & CP flush bend with fittings & CI brackets , including painting of fittings and brackets,cutting and making good the walls and floors where ever required. all compete as per the direction of Engineer in Charge. ( Make : Cera /Jaquar / Parryware)

Providing and fixing under counter white / Ivory wash basin of size 560mm x 470 mm with C.I./M.S. brackets, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. ( Make : Cera /Jaquar / Parryware)

Providing and fixing CP brass sensotronic sensor faucet for washbasin with 175mm extension body. All complete as per direction of EIC. ( Make : Cera /Jaquar / Parryware)

Providing & Fixing hand Spray (Health Faucet) with 8mm dia 1m long PVC tube of approved brand as per direction of Engineer-in-charge. ( Make : Cera /Jaquar / Parryware)

Providing and fixing specially designed superior quality and fancy looking mirror with 6mm thick backing ply and frame fixed to rawl plugs with CP brass screws complete in all respect. ( Make : Saintgobain/Modi Guard/AIS)

Providing and fixing 12 mm thick frameless toughened glass partition of approved brand and manufacture, including providing & fixing top & bottom fixings arrangement fittings all complete as per direction of Engineer -in -Charge. ( Nothing extra will be paid regarding fittings etc. ) ( Make : ModiGuard / SaintGobain / AIS )

Providing and fixing designer frosted film on toughened glass partition and doors as per required pattern complete as per direction of Engineer-in-Charge . ( Make : 3M / Garware )

Providing &Fixing 18/19 mm thick commercial wooden board ( termite proof) over the partition ,walls fixed with nails/screws and for making of cupboards, Overhead storage etc.complete with all respect and as per the direction of the Engineer in Charge.( Make : Centuary / Greenlam /Formica )

Providing & Fixing Vertical blinds 100mm with soft textured acrylic of any shade of approved quality and approved make,colour on the existing windows including cost of all materials such as brackets,plugs, screws etc. complete in all respect as per the the direction of Engineer in Charge. ( Make : Vista / Mac )

Providing and fixing double action hydraulic floor spring IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate. (Make : Ozone / Dorma )

P/F Set of of SS handles of 450 mm to 600 mm long for doors match with existing door. (Make : Ozone / Dorma )

Providing fixing SS glass door lock with strike box (without cut out) for frame less toughened glass doors match with existing door fittings with SS screws etc. complete as per direction of Engineer-in-charge (Make : Ozone / Dorma )

Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight Mineral Fiber false ceiling tiles of approved texture of size 600 x 600 mm in true horizontal level, suspended on concealed inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size panel to from Concealed grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel sheet with the help of rawl plugs and laying 20 mm thick densified edges Mineral Fiber ceiling tiles of approved texture in the grid, including, cutting/ making opening“for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size as per manufacture's specifications fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips. For all heights, as per specifications, drawings and as directed byEngineer-in-Charge. Note :- Only Mineral Fiber false ceiling area will be measured from wall to wall. No deduction shall be made for opening (cut outs) having area less than 0.30 sqm.The Mineral Fiber ceiling tile shall have NRC value of 0.50 (Minimum), light reflection > 85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity <0.043w/mK. ( Make : Armstrong or equivalent )

Providing & Fixing reflective type Sun control film of Garware or its equivalent make of approved quality colour as per the direction of Engineer in Charge including fixing into the existig windows/ door glass complete with all respect as per the the direction of Engineer in Charge. ( Make : 3M / Garware )

Providing and fixing bright finished SS floor door stopper for toughened glass doors with necessary screws etc complete.(Make : Ozone / Dorma )

Providing and applying mirror finish melamine polishing on wood work (two or more coats so as to achieve mirror finish) complete in all respect :

Providing and fixing Stainless steel connection pipe with brass unions : 45 cm length , 15 mm nominal bore

Providing and fixing on wall face un plasticised Rigid PVC soil waste/drain/waste water pipes conforming to ISI marked approved make supreme/phenolux or equivalent including jointing with seal ring conforming to relevent IS including 10 mm gap for thermal expansion.(Pressure 6kg/sqcm)110 mm diameter

Providing and fixing SS tower bolts ISI marked to required colour or shade with necessary screws etc. complete : upto size 300x10mm (Make : Ozone / Dorma )

Providing and fixing SS door handles, ISI marked, transparent or dyed to required colour or shade, with necessary screws etc. Complete up to size : 250 mm (Make : Ozone / Dorma )

Providing and fixing SS /Aluminium window handles, ISI marked, transparent or dyed to required colour or shade, with necessary screws etc. completeup to size : 125 mm (Make : Ozone / Dorma )

Providing and fixing SS Sliding door bolt for doors All complete as per direction of EIC. (Make : Ozone / Dorma )

Providing and fixing SS (of Grade 304 ) letters of size ( H ) upto 300mm and ( W ) upto 180mm and a CSIR Logo of dia upto 450mm

Providing and fixing of L-shape Toilet partitions and urinal partitions made with 12 mm thk both side laminated particle board with all necessary accesories i.e handle ,lockall SS legs etc. complete as per direction of EIC. Refer Annexure-1

Providing and fixing of korean stone of desired colour on reception table ( area of korean stone is upto 3.2 sqm for reception table )and washbasin counters of toilets (i.e. Area of korean stone is upto 1.600sqm for ladies toilet and area of Korean stone upto 1.6 sqm for Gents toilet ) with complete finish of edges all complete as per direction of EIC.Refer Annexure-1

Fabrication and fixing of decorative Panel for LED ( LED is not included ) in meeting room with 2nos storage unit. Size of central panel is upto 2700mmx3300mm and storage unit size is upto 1200mmx2700mm complete with all material where ever required i.e 18mm thick commercial ply of approved brand duly covered with 1.5 mm thick laminate of approved make and of any colour and shade ,telescopic channels,locks ,handles, 6mm ply , 4mm thick veneer, glass 12mm thk toughened ,MDF Jali and MDF Board with smooth PU/Duko Paint finish and with mirror finish malamine polish where ever required etc.all complete as per approved drawing(Refer Annexure-2 and as per direction of engineer incharge.

Providing & Fixing 8 mm thick laminated wooden flooring ( AC-4 ). including preparation of surface, making the surface properly levelled with approved chemica,PVC sheet and backing material complete with all respect as per manufacturers specifications and as per the direction of Engineer -in -Charge. ( Make Euro / Vista )

Providing & Fixing Laminated wooden skirting complete with all respect as per the direction of Enginer in Charge. ( Make Euro / Vista )

Supplying of Labour for shifting of office and lab furniture to basement, Nothing extra will be paid for shifting of material upto 4 floors.

Finishing walls with textured exterior paint of required shade: New Work( Two or more Coats applied @3.28 Ltr/ 10 sqm) over and including priming coat of exterior primer applied @2.20 KG/10 sqm.

Prviding and fixing of designer Acrylic sheet of any colour and design, thickness upto 3mm on wall and coloums wooden partion etc all complete as per direction of EIC.

Providing & Fixing of 3D washable Wall paper of approved design complete as per direction of Engineer in charge.

Providing and fixing bright ChromiumPlated brass 100mm cylindrical lock with 6 lever with necessary screws etc. complete in all respect as per direction of Engineer- in- Charge. ( Make : Ozone and Dorma and Godrej )

Providing &Fixing 8 mm thick commercial wooden board ( termite proof) over the partition ,walls fixed with nails/screws and for making of cupboards, Overhead storage etc.complete with all respect and as per the direction of the Engineer in Charge.( Make : Centuary / Greenlam /Formica )

Providing and fixing 12 mm thick toughened glass on aluminium partition of approved brand and manufacture, including providing & fixing top & bottom fixings arrangement fittings all complete as per direction of Engineer -in -Charge. ( Nothing extra will be paid rgarding fittings etc. ) ( Make : Saintgobain/Modi Guard/AIS)

Providing & Fixing of Double Skin Zebra blinds 100mm with soft textured acrylic of any shade of Vista/Mac or equivalent make of approved quality,colour on the existing windows including cost of all materials such as brackets,plugs, screws etc. complete in all respect as per the the direction of Engineer in Charge.( Make : Vista / Mac )

Providing & Fixing 12mm thick MDF pannel board with laser cut 2D & 3D designs of size up to size (8 ft. x 4 ft), finished with PU paint and fixed with nails/screws on walls , partitions and wooden partitions,ceilings etc. - Complete. As per direction of engineer in charge ( Make : Centuary / Greenlam /Formica )

Providing and fixing 6 mm thick Plainiaque evolution lacquered coloured glass on wall panel of requried size, Fixed on 18/19 mm plain commercial board with wooden/G.I/stell frame work,all complete as per the drawing & directions of engineer-in-charge.( Frame work & backing board shall be paid for separately).

Providing and fixing of Anti Bird net in windows and openings of any size upto floor 5 all inclusive of fittings and fixtures all complete as per direction of EIC

Sub Head-2 ( BuyBack )

Buy back the dismantalled existing Al uminium windows & angle frames of windows of ashorted size and taking out CSIR-NISCAIR building premises including loading unloading and transportation etc complete. The weight of the GI will be ascertained on the basis of the difference of loaded vehicle and the tare weight of the vehicle after weighing the same at weigh Bridge (Dharm kaanta). The charges of weighing will be borne by the contractor. (Note: Nothing extra will be paid for shifting / loading /unloading of the dismantaled material from third floor to ground floor of the office building.)

Buy back the dismantalled existing wooden supporting members of false ceiling of assorted size and taking out from CSIR-NISCAIR Satsang Vihar premises including loading unloading and transportation etc complete. [ Area of false-ceiling will be measured for qty of wood ](Note: Nothing extra will be paid for shifting / loading /unloading of the dismantaled material from third floor to ground floor of the office building.)

Dismantling of existing G.I Air conditioning ducts including M.S supports/ M.S frames etc. complete on 'As is where is basis' including all labour T&P etc. and Buy back of dismantled AC ducts and taking out from CSIR NISCAIR-SV premises including loading unloading and transportation etc complete. (Note: 1. The weight of the GI Duct & M.S supprots / frames etc. will be ascertained by taking difference of tare weight of vehicle & loaded weight of vehicle at Dharamkanta. 2.Nothing extra will be paid for shifting / loading /unloading of the dismantaled material from third floor to ground floor of the office building.)

Sub Head -3 ( Furniture )

Providing and placing in position a executive desk the system shall be a desk-based system with a platform understructure made up of a combination of MS. Tubes and plates.The slanted legs (SWING) are connected to the understructure with the help of PDC Connectors to provide a stable and sturdy base for the worktops. Modesty panel shall be of Metal 1.2 mm thick CRCA. Worktop shall be made of 25MM thick Pre-Laminated Board conforming to IS: 12823. All the edges of work surface shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue. It shall be a part of the understructure and can be in the form of enclosed metal tray to provide concealed wire management throughout the cluster formation.Pedstal shall be with two drawers & one filing cabinet of suitable size to be placed below, plus KBPT & CPU trolley. Over all The item should be as per the Manufacturers Standard specifications ( from attached List of Make ).

Size 1800x750mm + 900 mm x 450mm

Size 1500x750mm + 900mm x 450mm

Supplying and Placing 2 seater sofa of size 1460mm ( ± )W x 905 mm( ± ) D x 855mm ( ± ) H. The seat is made of PU foam with Density 28± 2 kg/cu.mtr having an additional top layer of super soft PU foam in Density 32 ± 2 kg/cu. upholstered with fabric or leatherette. The back is made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure is made up of 1.2±0.1 cm. thick hot pressed plywood (moisture resistance & termite proof) & pinewood of cross section devoid of major knots & surface defects 6 nos. per seat & 3.8 mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose 6 nos. per seat & 3.8 mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose. It is a welded assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap. The Over all item should be as per the ManufacturersStandard specifications ( from attached List of Make ) .

Supplying and Placing in place of 1 seater sofa of Size 850 mm( ± )W x 900mm ( ± )D x 855mm ( ± )H. The seat should be made of PU foam with Density 28 ± 2 kg/cu.mtr having an additional top layer of supersoft PU foam with Density 32 ± 2 kg/cu. Seat should be upholstered with fabric or leatherette. 2) BACK FOAM: The back should be made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood (which also shall be resistance and termite proof as per IS:303.) and pinewood of cross section deviod of major knots and surface defects 6 nos. per seat and 3.8mm dia. zigzag spring assembly is mounted over understrucrure for cushioning effect. It should be a welded assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap. The Over all item should be as per the Manufacturers Standard specifications ( from attached List of Make ).

Providing and placing of two tiered Center Table with top & shelf below having a load bearing capacity of minimum 40 Kgs. Made up of Engineered wood and finish with approved colour. Dimensions of the table is(W X H X D in mm )1200x400x800 ( ± ). the center table shall be provided with 8mm thk plain glass with edges machine polished. Over all The item should be as per the Manufacturers Standard specifications ( from attached List of Make ) .

Providing and placing of two tiered Corner Table with top & shelf below having a load bearing capacity of minimum 40 Kgs. Made up of Engineered wood and finish with approved colour. Dimensions of the table is(W X H X D in mm )600x600x349 ( ± ). the center table shall be provided with 8mm thk plain glass with edges machine polished. Over all The item should be as per the Manufacturers Standard specifications ( from attached List of Make ) .

Supplying and placing in position Executive Revolving High Back chair with Head Rest [having size of seat 470mm ( ± ) (W) x 495mm ( ± )(D) and size of back 450mm ( ± ) (W) x 653mm ( ± ) (D)] with seat made up of thick hot pressed plywood . The back is made up of injection moulded glass filled nylon & upholstered using net fabric with high tenacity yarn. The back assembly should have an height adjustable lumbar support pad having adjustment , Adjustable Armrest should be made up of the integrated layer of Thermoplastic Elastomer . The mechanism of the chair shall be of : 360⁰ revolving type with Tilt tension adjustment, 4 position locking with anti shock feature. The chair shall be provided with pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm. The pedestal shall be made of high pressure Die-cast aluminium fitted with 5 nos twin wheel castor shall be made of Nylon injection moulded in black glass filled Nylon. Over all The item should be as per the Manufacturers Standard specifications ( from attached List of Make ).

Supplying and placing in position Revolving Mid Back chair [having size of seat 470mm ( ± )(W) x 495mm ( ± )(D) and size of back 450mm ( ± )(W) x 653mm ( ± )(D)] with seat made up of thick hot pressed plywood . The back is made up of injection moulded glass filled nylon & upholstered using net fabric with high tenacity yarn. The back assembly should have an height adjustable lumbar support pad having adjustment , Adjustable Armrest should be made up of the integrated layer of Thermoplastic Elastomer . The mechanism of the chair shall be of : 360⁰ revolving type with Tilt tension adjustment, 4 position locking with anti shock feature. The chair shall be provided with pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm. The pedestal shall be made of high pressure Die-cast aluminium fitted with 5 nos twin wheel castor shall be made of Nylon injection moulded in black glass filled Nylon. Over all The item should be as per the Manufacturers Standard specifications ( from attached List of Make ) .

Providing and placing of panel & tile based modular workstations L-Type of size 1500 mm W1 x 1500W2 x 600mm(D) x 1200mm(H) with partition thickness of 50 mm thick including powder coated aluminium trims and supported on Legs for better air circulation and helps in keeping floor clean. Panels Construction - Each panel consists of Vertical extrusions 2Nos and Horizontal extrusions made of 1.2mm thick aluminium with duly powder coated at every division of tile/block. Each panel have Bottom frame fabricated for 50 mm panel comprises of L-channels made of 2mm thick CRCA steel , formed plates of 3mm thick HR steel & ERW steel tube of size 35x15x1.6mm thick in oval cross section welded together.Each Panel consists of 2Nos Intermediate blocks. In a 50 mm Thick panel intermediate block shall comprise of 38mm thick paper honeycomb with 3mm MDF on each sides and 0.6mm decorative laminate on both sides. Aluminium Trims : The top trims and end trims for 50 mm shall be made from aluminum extrusion.

All kinds of extrusions for 50 mm shall have average wall thickness of 1.2 mm & having finish of powder coating. Wire Management - Wires runs through the system from Bottom tile and extended to the top at various locations by the help of 2 nos. vertical Cable Ducts in each panels. Cable duct shall be made from 0.8 mm thick M.S. CRCA . It is constructed with two parts, one is body & another is cover. Worksurface :Worktop of Size : 1200mm(L) X 600mm(D). Worktop shall be made out of 25mm thick prelam particle board. All the open edges of work surface shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue.Mobile Pedestal : Mobile Drawer Unit having 3 Drawers Unit having flat metal front and top with Central locking. The Drawer Unit consistes of 2Box and 1File Drawers. The Overall size of the Drawer Units is 450mm ( ± )(W) X 435mm ( ± )(D) X 646mm( ± )(H). Construction & Material of Drawer Unit : Welded Assembled of 0.8 thick CRCA for Body Shell, Drawer Front & tray, Front Side Stiffener, Rear Side Stiffener & Bottom, 1.2 thk CRCA Top Stiffener & Bottom stiffener. Drawer Fronts & Metal Front Straight Edge. with KBPT and CPU Trolley. Over all The item should be as per the Manufacturers Standard specifications ( from attached List of Make ) .

Providing and placing vertical Standing storage unit of size (1219mm X900mmX450mm) ( ± )made up of 25mm thk and 18mm thk Pre-Laminated boards conforming to IS;12823:1990 with metal cladding of 0.8mm thk C.R.C.A (as per IS:513) from outside. Side metal cladding is coated with Epoxy polyster powder of 50±10 microns thickness. The Storage units are provided with 11mm thk bent metal tops made of 0.8mm thk C.R.C.A coated with Epoxy polyester powder of 50± 10 microns thickness.The doors are made of 18mm thk Pre-laminated boards with decorative laminate on one side and backing laminate on the other side. Over all The item should be as per the Manufacturers Standard specifications ( from attached List of Make ) .

Providing and placing of Conference Table Made of 36mm thick MDF­one side pre­laminate board conforming to IS­14587:1998 with 0.4mm PVC membrane pressed on to top and having chamfered edge. Full length access panel is provided with soft closing hinges inline with worktop edge. The understructure consist of mixture of 18mm and 25mm Thick Pre-laminated twin board , Edge banded with matching 2 mm thick PVC lipping. Aluminium alloy WP profile is used for connecting panels together Made of 18mm Thick Pre-laminated twin board of grade and approved shade , Edge banded with matching 2 mm thick PVC lipping.An array of panels made of 0.8mm and 1.2 mm CRCA MS, epoxy polyester powder coated (DFT 40-60 microns) is used for flow of wires and cables.

Cutout for Standard Anchor Roma 4 module is provided for electrical fittings below access flap per seat the h 3mm MDF on each sides and .6 mm decorative laminate on both sides. Aluminium trims : the top trims and end trims for 50mm shall be made from aluminium extursion. All kind of extrusions shall have average wall thickness of 1.2mm & having finish of powder coating. Wire management - wires run through the system from bottom tile and extended to the top at various locations by the help of 2nos. vertical cable ducts in each panels. Cable duct shall be made from .8mm thick MS CRCA. it is constructed with two parts one is body and another is cover Worksurface : work top size 1200mmx600mmx750mm per Module. Over all The item should be as per the Manufacturers Standard specifications( from attached List of Make ) .

Providing and placing of Conference Table Made of 36mm thick MDF­one side pre­laminate board conforming to IS­14587:1998 with 0.4mm PVC membrane pressed on to top and having chamfered edge. Full length access panel is provided with soft closing hinges inline with worktop edge. The understructure consist of mixture of 18mm and 25mm Thick Pre-laminated twin board , Edge banded with matching 2 mm thick PVC lipping. Aluminium alloy WP profile is used for connecting panels together Made of 18mm Thick Pre-laminated twin board of grade and approved shade , Edge banded with matching 2 mm thick PVC lipping.An array of panels made of 0.8mm and 1.2 mm CRCA MS, epoxy polyester powder coated (DFT 40-60 microns) is used for flow of wires and cables.

Cutout for Standard Anchor Roma 4 module is provided for electrical fittings below access flap per seat the h 3mm MDF on each sides and .6 mm decorative laminate on both sides. Aluminium trims : the top trims and end trims for 50mm shall be made from aluminium extursion. All kind of extrusions shall have average wall thickness of 1.2mm & having finish of powder coating. Wire management - wires run through the system from bottom tile and extended to the top at various locations by the help of 2nos. vertical cable ducts in each panels. Cable duct shall be made from .8mm thick MS CRCA. it is constructed with two parts one is body and another is cover Worksurface : work top size 1200mmx600mmx750mm per Module. Over all The item should be as per the Manufacturers Standard specifications( from attached List of Make ) .

Providing and placing of Executive Table of Size 2100mm x 900mm with ERU 1200mm Made of 25mm Thick Pre-laminated twin board . Edge banded with matching 2 mm thick PVC lipping.Soft closing access flap with in-build power box are provided on work surface for wire management.Modesty Panel-Made of 25mm Thick Pre-laminated twin board , Edge banded with matching 2 mm thick PVC lipping.Under-structure-Made of 25mm Thick Pre-laminated twin board , Edge banded with matching 2 mm thick PVC lipping.Hinge DoorStorage-Made of 25mm Thick Pre-laminated twin board , Edge banded with matching 2 mm thick PVC lipping.Handle is provided for ease of opening.Storage is provided with cam lock for security. Integrated Pedestal -Made of 25mm Thick Pre-laminated twin board , Edge banded with matching 2 mm thick PVC lipping.

Drawer fronts made of 25mm thickMDF one side pre-laminate board confirming toIS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedstal shall be with two drawers & one filing cabinet of suitable size to be placed below with KBPT plus CPU trolley which Uses powder coated 400 MM long metalPanel Drawer Slides. Drawer extension is 325 MM.Drawers have a soft closing & anti slam mechanism. All the prelam Boards shall of E1-P2 grade and approved shade confirming to IS-12823:1990. The drawers of pedestal shall be provided with locks, handles and necessary Hardwares etc .Over all The item should be as per the ManufacturersStandard specifications ( from attached List of Make ).

Providing and placing of Executive Table of Size 2100mm x 900mm with ERU 1200mm Made of 25mm Thick Pre-laminated twin board . Edge banded with matching 2 mm thick PVC lipping. and the other work Surface is Made of 25mm thick MDF one side pre-laminate board with 0.4mm PVC membrane pressed on to top. Softclosing access flap with in-build power box are provided on work surface for wire management. Modesty Panel:Made of 25mm thick MDF one side laminate board with 0.4mm PVC membrane pressed on to top Under- structure:Made of 25mm Thick Pre-laminated twin board , Edge banded with matching 2 mm thick PVC lipping. Integrated Pedestal:Made of 25mm Thick Pre-laminated twin board , Edge banded with matching 2 mm thick PVC lipping.

Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top pedstal shall be with two drawers & one filing cabinet of suitable size to be placed below with KBPT plus CPU trolley which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. All the prelam Boards shall of E1-P2 grade and approved shade conforming to IS;12823:1990.the drawers of pedestal shall be provided with locks, handles and necessary Hardwares etc .Over all The item should be as per the Manufacturers Standard specifications ( from attached List of Make ).

Providing and placing of Back unit of Size 1800mm W x 500mm D x 1800mm H Made of 25mm Thick Pre-laminated twin board , Edge banded with matching 2 mm thick PVC lipping.Slide Door Unit-Made of 25mm Thick Pre-laminated twin board , Edge banded with matching 2 mm thick PVC lipping for body panels like side, bottom,back and shelves.Shutters are made of 25mm thick MDF one side pre-laminate board with 0.4mm PVC membrane pressed on to top.Shutters have a soft closing & anti slam mechanism.Display/StorageUnit-Made of 25mm Thick Pre-laminated twin board , Edge banded with matching 2 mm thick PVC lipping for bodypanels like side,back and shelves. Doors are made of 25mm thick MDF one side pre-laminate board with 0.4mm PVC membrane pressed on to top.Top panel of display unit Made of 25mm thick MDF one side pre-laminate board with 0.4mm PVC membrane pressed on to top. All the prelam Boards shall of E1-P2 grade and approved shade conforming to IS;12823:1990.the back unit shall be provided with locks, handles and necessary Hardwares etc. Over all The item should be as per the Manufacturers Standard specifications ( from attached List of Make ).

Providing and placing in position of High Back Executive Revolving Chair[ Seat SIZE : 47.6 cm. ±(W) x 49.2 cm. ±(D)BACK SIZE : 46.5 cm. ±(W) x 59.5 cm. ±(D) ]. The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with pure leather and moulded High Resilience (HR) Polyurethane foam .The Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube . It upholstered with Pure Leather.ARMRESTS: The armrest top should be moulded from polyurethane(PU), upholstered in pure leather and mounted on to a drop lift adjustable type tubular armrest support made of tube having chrome plated finish.The armrest height adjustable up to 5 steps. ACTIVE BIO-SYNCHRO mechanism: The adjustable tiltng mechanism should be designed with 360° revolving type , Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort , Tilt tension adjustment can be operated in seating position

5-position Tilt limiter giving option of variable tilt angle to the chair , The mechanism housing should be made up of HPDC Aluminium black powder coated, SEAT DEPTH ADJUSTMENT: Seat depth adjustment should be integrated in the seat through a sliding mechanism. ADJUSTABLE BACK SUPPORT: Back Frame should be connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted for the comfortable back support to suit individual need. PNEUMATIC HT. ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke PEDESTAL ASSEMBLY The pedestal should be High Pressure Die cast polished hed Aluminium fitted with 5 nos. twin wheel castors. and should be injection moulded in Black Polypropylene. Over all The item should be as per the Manufacturers Standard specifications ( from attached List of Make ) .

Providing and placing in position of High Back Executive Revolving Chair [ The Seat SIZE : 470 mm.± (W) x 480m. ±(D) and The BACK SIZE: 475mm ± (W) x 765 mm ± (D) ]with Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with leatherette and moulded High Resilience (HR) Polyurethane foam . The Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube. It upholstered with Leatherette. . The armrest top should be moulded from polyurethane(PU) and mounted on to a drop lift adjustable type tubular armrest support made of M.S. E.R.W tube having chrome plated finish.The armrest height adjustable up to 5 steps.The adjustable tilting mechanism with 360' revolving type ,Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort

Tilt tension adjustment can be operated in seating position ,5-position Tilt limiter giving option of variable tilt angle to the chair. The mechanism housing should be made up of HPDC Aluminium black powder coated. Seat depth adjustment should be integrated in the seat through a sliding mechanism with Seat depth adjustment range. Back Frame should be connected to the Up/Dn mechanism . It can be adjusted for the comfortable back support to suit individual need, The pneumatic ht adjustment has an adjustment stroke. The pedestal should be High Pressure Die cast polished Aluminium with 5 nos. twin wheel castors and should be injection moulded in black Polypropelene. Over all The item should be as per the ManufacturersStandard specifications ( from attached List of Make ) .

Supplying and Placing 3 seater sofa of size 2050mm ( ± ) x 900mm ( ± ) x 850mm ( ± ). The seat is made of PU foam with Density 28± 2 kg/cu.mtr having an additional top layer of super soft PU foam in Density 32 ± 2 kg/cu. upholstered with fabric or leatherette. The back is made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure is made up of 1.2±0.1 cm. thick hot pressed plywood (moisture resistance & termite proof) & pinewood of cross section devoid of major knots & surface defects 6 nos. per seat & 3.8 mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose 6 nos. per seat & 3.8 mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose. It is a welded assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap. Over all The item should be as per the Manufacturers Standard specifications ( from attached List of Make ).

Providing and placing of panel & tile based modular workstations Rectilinear Type of size 1200 mm(W) x 600mm(D) x 1200mm(H) with partition thickness of 50 mm thick including powder coated aluminium trims and supported on Legs for better air circulation and helps in keeping floor clean. Panels Construction - Each panel consists of Vertical extrusions 2Nos and Horizontal extrusions made of 1.2mm thick aluminium with duly powder coated at every division of tile/block. Each panel have Bottom frame fabricated for 50 mm panel comprises of L-channels made of 2mm thick CRCA steel, formed plates of 3mm thick HR steel & ERW steel tube of size 35x15x1.6mm thick in oval cross section welded together.Each Panel consists of 2Nos Intermediate blocks. In a 50 mm Thick panel intermediate block shall comprise of 38mm thick paper honeycomb with 3mm MDF on each sides and 0.6mm decorative laminate on both sides. Aluminium Trims : The top trims and end trims for 50 mm shall be made from aluminum extrusion. All kinds of extrusions for 50 mm shall have average wall thickness of 1.2 mm & having finish of powder coating.

Wire Management - Wires runs through the system from Bottom tile and extended to the top at various locations by the help of 2 nos. vertical Cable Ducts in each panels. Cable duct shall be made from 0.8 mm thick M.S. CRCA . It is constructed with two parts, one is body & another is cover. Worksurface :Worktop of Size : 1200mm(L) X 600mm(D). Worktop shall be made out of 25mm thick prelam particle board. All the open edges of work surface shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue.Mobile Pedestal : Mobile Drawer Unit having 3 Drawers Unit having flat metal front and top with Central locking. The Drawer Unit consistes of 2Box and 1File Drawers. The Overall size of the Drawer Units is 450mm( ± )(W) X 435mm( ± )(D) X 646mm( ± )(H). Construction & Material of Drawer Unit : Welded Assembled of 0.8 thick CRCA for Body Shell, Drawer Front & tray, Front Side Stiffener, Rear Side Stiffener & Bottom, 1.2 thk CRCA Top Stiffener & Bottom stiffener. Drawer Fronts & Metal Front Straight Edge. with KBPT and CPU Trolley.Over all The item should be as per the ManufacturersStandard specifications ( from attached List of Make ) .

providing and placing in position of Vertical sliding door Storage Unit of size 1830mmx900mmx450mm with Rigid Knock down construction. CRCA 'D' grade as per IS-513 5. Sliding Door Arrangement Sliding Door with top hanging arrangement to prevent derailment. Each door provided with 2 Plastic roller having steel ball bearing for smooth movement of door & less noise. Locking & handle : Snap on type aesthetically appealing die cast Cam lock for safe locking Plastic flush & recessed handle. Wooden top is provided which is made of 25mm thick Pre-laminated board conforming to IS;12823:1990. Shelving : Height wise Adjustable Shelf Mounting Uniformly Distributed Load Capacity of the shelf is 40 Kg maximum 4 Nos. of Adjustable Full Shelves hex plastic base (add in unit height min.8 mm & additional 5 mm max for adjustment) Finish Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10). Back, Sides and Door are made from 0.7mm (± high yield).Over all The item should be as per the ManufacturersStandard specifications ( from attached List of Make ) .

Sub - Head 4: Electrical Work

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.

Group C

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

Supplying and fixing following size modules, GI box along with modular base & cover plate for modular switches, sockets & electronic fan regulator in recess etc. as required.

1 or 2 Module ( 75 mm x 75 mm )

8 Module ( 125 mm x 125 mm )

Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5 / 6 amps switch

3 pin 5/6 amp socket outlet

Telephone socket outlet (RJ 11 single with shutter)

Modular type blanking plate

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts “C” curve DP MCB complete with connections, testing and commissioning etc. as required.

Supplying and fixing call bell / buzzer suitable for single phase, 230 V, complete as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

4 X 2.5 sq. mm + 2 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Supplying and fixing of modular RJ 45 (Modem Jack) CAT6 I/O socket outlet on the modular single socket face plate and plastic gang box including connections complete etc. as required.

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying of following Energy efficient recessed mounting direct / indirect high performance decorative LED luminaire / fittings in false ceiling, with all required drivers, accessories complete in all respect. (Make : Philips / Wipro)

Recess LED of 30 W or above, 2'x2' LED flat panel 220 V, 50 Hz LED Light Fitting complete with Cool White light of Model Wipro Cat No.: CRCO10R038HP65GL1/ Philips cat ref: RC380B LED36S-6500 G4 L60 W60 PSU .

Recess mounted round LED downlighter of 9W or above, 220 V, 50 Hz light Fitting with Cool White light. Model Wipro Cat No.: LD06-111-XX-65-XX / Philips cat ref: DN 191B LED 65-6500 - PSU-WH

Surface mounted round LED downlighter in aluminum die cast body of 12 W or above (Round) 220 V, 50 Hz , with all required drivers with Cool White light. Model :- Wipro Cat No.: LD80-101-XXX-60-SM/ Philips cat ref: SM250C LED 12S-6500 PSU WH

Tarang Bright 20 Watt LED Batten ( Cool Day Light ) 240 V, 50 Hz, Fitting (Philips) OR Garnet 22W LED Batten (Wipro)

31402 Muziris 7W Picture light LED warm white (Philips)

Bulk Head Luminare of 10 W or above Make: Wipro Cat No.: LW07-141-XXX-65-G1 / Philips

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent/ LED panel fitting of all types complete with all accessories including chain etc. and tube / lamps etc. directly on ceiling / wall including connection with 1.5 Sq.mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Installation, testing and commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS /CFL /LED lamps per fitting, complete with all accessories including connections etc. as required.

SITC of LED Cove light Strip with driver complete etc as required. (make : Philips Linea OR Wipro Garnet)

Supplying, installation, testing & commissioning of wall mounting fan (white) with regulator of 400 mm sweep 230V, 50 Hz AC with oscilation on wall / wood with the help of rawl plug and screws including connections etc complete in all respect.

Supplying and fixing 3 Pin, 5 A Ceiling rose on the existing junction box / wooden block including connections etc as required.

Supply of Heavy Duty Exhaust Fan of 300 mm sweep, 900/1400 rpm, single phase complete with all accessories including their connections & testing etc complete in all respect.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep

Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.

SITC of ABS PLASTIC Automatic Hand Dryer (White) 1 Phase, 1800 W, 200 - 240 V , 50 Hz, Dry Hand Time : 15-20 Seconds etc complete as required. (Make : Dolphy)

Supplying, installation, testing and commissioning of Passive Infrared (PIR) technology based occupancy sensor having high performance, non regulating programmable type, suitable for connected load upto 10 amp, for mounting height upto 2.8 mtr and for 5 m diameter coverage area along with necessary fixing arrangements i/c programming at site etc. complete as required.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). 6 way (4 + 18), Double door

Supplying and fixing 63 amp, 10 KA TPN "C" curve MCB, 415 V, in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing TPN sheet steel enclosure on surface/ recess along with 63 amps, 10 KA, 415 V “C” curve TPN MCB complete with connections, testing and commissioning etc. as required.

Providing and fixing 200 A,36KA,FPMCCB rating and breaking capacity MCCB with sheet steel enclosure ( cubicle panel board) on surface/ recess, thermomagnetic release and terminal spreaders including rilling holes in cubicle panel, making connections, etc. as required.

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/submain wiring/ cable as required.

Supplying of following size Aluminium armoured XLPE / PVC insulated and PVC sheathed cable of 1.1 KV grade.

3.5 core x 70 sq mm

3.5 core x 95 sq mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on wall surface as required. Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3 mm MS flat clamp)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.

3½ X 70 sq. mm (38mm)

3½ X 95 sq. mm (45mm)

Supplying and drawing of 4 x 16 sq mm FRLS PVC insulated copper conductor, Single Core Heavy Duty Copper Cable in the existing surface/ recessed steel/ PVC conduit including connections with copper lugs etc complete as required.

Supplying and fixing 63 A rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30mA in the existing MCB DB complete with connections, testing & commissioning etc. as required.

Dismantling of existing 2 Nos. dome type cameras, 1 No. 4 channel DVR, supply cable and copper coaxial cable with all accessories and re-installation the same with cable drawing in existing PVC pipe etc. complete in all respect.

Dismantling of existing 1 No. 12 way TPN MCB DB, 1 No. 4 way TPN MCB DB and 3.5 core x 70 sqmm size AL armoured cable approximate 39 meter with all accessories and re-installation the same including cable connections with new lugs, cable gland etc. complete in all respect.

Disconnecting & dismantling of existing 06 Nos. Window and 09 Nos. Split type AC units up to 2 TR capacity including Copper piping, MS stand, cable etc and shifting from CSIR IPU , NISCAIR Building Satsang Vihar Marg to CSIR Hq., Rafi Marg , New Delhi.

Disconnecting & dismantling of existing 2x2 racess mounting 13 Nos., Surface mounting 2 Nos LED light fitting and 06 Nos. 400 mm Sweep Wall Mounting Fan and shifting from CSIR IPU , NISCAIR Building Satsang Vihar Marg to CSIR Scientist Apartments, Ashram Chowk , Maharani Bagh, New Delhi.

Dismantling of existing AHU plant / Unit 2.5 m x 2.5 m x 2 m (Approximate) installed at 3 rd floor CSIR-NISCAIR building having 1 no. 3 phase motor, 1 no. blower, 16 nos. filters, 1 no. cooling coil, 2 nos. meter gauge panels, 1 no. timer panel, 1 no. main switch 16 amps, MS febricated air duct (Approximate 10 sqm), 20 mtr. water pipe line upto 80 mm, 7 nos. GM gate valve upto 100 mm including dismantling of 60 sqm of room acoustic wooden / mdf board panelling etc. and deposit at store as per instruction of Engineer-In-Charge.

Disconnecting & dismantling of existing flourescent fitting, all type switch & socket boards, MCB box, DB Box, wall mounting fan, exhaust fan, geyser and wiring etc. complete as required.

Salvage value of following dismantaling material "As is where is basis".

2x36 watt fluorescent fitting including wiring

4x18 watt fluorescent fitting (2x2) including wiring

1x36 watt PL surface type fitting

1x36 watt fluorescent surface type fitting

Modular box up to 12 module with sheet, switch socket 6/16 amp including wiring

Wall fan 400 mm sweep including wiring

Exhaust fan 300 mm including wiring

Geyeser 3 ltr. including wiring

Piano type switch and socket 6/16 amp with all size of hylum sheet and box including wiring

Modular Power plug point with 32 A MCB (1+1)

32 A SPN MCB with sheet enclosure with wiring

DB 4 way Single door with MCB

Modular LAN point including wiring

Modular Telephone point including wiring

Industrial box with MCB

Split AC 1.5 TR all makes including dismantling

Window AC 1.5 TR all makes including dismantling.

Sub - Head 5: EPABX SYSTEM

Supplying, installation, testing and commissioning of 100 pairs Main Distribution Frame (MDF) box with Krone module and frame etc complete in all respect.

Supplying, installation, testing and commissioning of Digital IP based EPABX system for 6 X 96 Lines (102 Lines) with one 24 Key Digital Phone / Operator console etc complete in all respect. Make :- NEC/Unify/Karel/Alcatel

Supplying, installation, testing and commissioning of PRI Card for inter connectivity of existing EPABX systems etc complete in all respect. Make :- NEC/Unify/Karel/Alcatel

Supplying, installation, testing and commissioning of push button CLI Telephone Instrument with tone/pulse dialing, CLI display, two-way hand free opetations, recall / flash / mute buttons and tone / plus switchable including connections etc complete in all respect. Make :- Beetel / Panasonic

Supplying, installation, testing and commissioning of Digital Phone / KTS with two line LCD display, 12 programmable keys, two way speaker, hand free operations, CLI display and seif programmable including connections etc complete in all respect. Make :- NEC/Unify/Karel/Alcatel

Sub - Head 6: FIRE DETECTION AND ALARM SYSTEM

Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required.

Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.

Supplying, installation, testing & commissioning response indicator on surface/recess MS box having two LEDs metallic cover complete with all connections etc. as required.

Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required.

Supplying & laying following size fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.

(a) 2 x 1.5 sqmm

(b) 3 x 1.5 sqmm

Sub - Head 7: VRV / VRF SYSTEM

Supply, Installation, Testing & Commissioning of Modular Type Variable Refrigerant Flow / Variable Refrigerant Volume Air Cooled Outdoor units suitable for cooling and heating, having all hermetically sealed inverter type Scroll Compressor(s), minimum two compressors for above 14 HP modules, microprocessor based Controller, top discharge type condensing unit(s), with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit shall be suitable towork on 400V +/-10%, 3Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required. The COP at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5 .

96 HP VRV/VRF ( 24 HP X 4 Nos. )

Indoor Units : Compact Cassette type

Supply, installation, testing and commissioning of following minimum capacity 4-way flow VRV/ VRF Cassette Type Indoor Ceiling Mounted unit equipped with synthetic washable media pre-filter,fan section with low noise fan/ dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cord less remote control etc., suitable for operation on single phase 230V ±10%,50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.

Copper Refrigerant Piping with Insulation for VRV System

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/ hard drawn Copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing / brazing including accessories, insulated with XPLE Class- O tubular insulation/ with Class-O closed cell eltometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required :

9.5 mm dia (OD) (Softdrawn) with tubethickness 1.2 mm with 19 mm thick insulation

12.7 mm dia (OD) (Softdrawn)with tube thickness 1.2 mm with 19 mm thick insulation

15.86 mm dia (OD) (Softdrawn) with tube thickness 1.2 mm with 19 mm thick insulation

19 mm dia (OD) (Harddrawn) with tube thickness 1.2 mm with 19 mm thick insulation

22.2 mm dia (OD) (Harddrawn) with tube thickness 1.2 mm with 19 mm thick insulation

28.58 mm dia (OD) (Harddrawn) with tube thickness 1.2 mm with 19 mm thick insulation

34.9 mm dia (OD) (Harddrawn) with tubethickness 1.62 mm with 19 mm thick insulation

41.27 mm dia (OD) (Harddrawn) with tubethickness 1.62 mm with 19 mm thick insulation

Supply, Installation, testing and commissioning of Refrigerant Piping Y-Joints for above Outdoor and Indoor units. ( liquid and gas line as one set)

Supply, Installation, testing and commissioning of 5.5 TR Treated Fresh Air ductable type Indoor units with Corded Remote , equipped with pre-filter, fan section with suitable static fan, multispeed motor, coil section with DX coil, outer cabinet, drain pan, insulation, pipe connections, variable evaporative temperature control etc. of various capacities as per specifications and drawings.

Drain Piping

SITC of PVC (Minimum 10 Kg/Sqcm pressure rated) Hard Drain Water Piping complete with fittings (elbows, tees, reducers, sockets etc.), supports, jointing and any other item required to make the system complete. Nominal Diameters of Pipes in mm as indicated below with 9 mm thick closed cell nitrile rubber insulation :-

32 mm ( with 9 mm Class- O XLPE)

40 mm ( with 9 mm Class- O XLPE)

CONTROL CABLING

Supply, Installation, Testing and Commissioning of Control Cum Transmission Wiring of Copper with 20 mm PVC conduits between indoor and outdoor units wire size as per OEM recommendation etc complete as required. (Should be Copper Shielded Cable in PVC conduits)

DUCTING AND ADP

Providing & fixing of flexible canvass connection between indoor units and supply air duct etc complete in all respect.

Supply and application of external thermal insulation on ducting with closed cell elestomeric insulation of duct 9 mm thick nitrile rubber class "O" of density 30 / 40kg per cubic meter with pasting material and tape etc. complete in all respect.

Design supply, installation, testing of sheet metal duct in accordance with the approved shop floor drawings and specifications GI sheet metal ducting for supply of fresh air complete with fully threaded rods,slotted angles or doubles l bottom breaker 3mm ms, nuts, washers and anchor bolts - 24 Gauge etc. complete in all respect.

Supplying and fixing of Pre Insulated Fire rated Fibre Glass Flexible Duct with Spigot

ELECTRICAL WORK

Supply, laying, testing and commissioning of 3 Core x 2.5 Sq. PVC insulated & PVC sheathed Copper Conductor round flexible cable in existing PVC conduit for Indoor Cassette Units etc complete in all respect.

Supplying of 4 Core x 16 Sqmm Copper Conductor armoured XLPE / PVC insulated and PVC sheathed Cable of 1.1 KV grade as required.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade Up to 35 sq.mm (clamped with 1 mm thick saddle) on cable tray / wall surface as required.

Supplying and making end termination with brass compression gland and Copper lugs for 4 Core x 16 Sqmm PVC insulated and PVC sheathed / XLPE Copper conductor cable of 1.1 kV grade as required.

Supplying and installing 300 mm width X 50 mm depth X 1.6 mm thickness size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.

s. K. Industries

S. N. ELECTRIC & MAINTENANCE PRIVATE LIMITED

S P CONSTRUCTION

arcon group