Renovation of Soil Test Laboratory at Krishi Bhawan Campus, Kanke Road, Ranchi

Amount

Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Dismantling plain cement or lime concrete work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Dismantling damaged Tiles work in floors and roofs laid in cement mortar including stacking materials within 50metres lead for thickness of tiles above 25mm and upto 40mm including all complete job as per direction of E/I.

Taking down old door and window shutters including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Taking down chaukhats in doors including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Taking sown chaukhats in windows including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Dismantling aluminium/Gypsumpartitons,doors,windos,fixed glazing and false ceiling including disposal of unserviceable surplus materials and stacking of serviceable materials within in 50 meters lead as directed by E/I.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size)

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing and laying Doublecharge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 / ISO 13006 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm .

Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointing with white cement including rubbing, polishing and cost of curring taxes and royalty all complete as per building specification and direction and E/I.

With "A" grade white Tiles.

Providing and laying rectified ceramic glazed floor tiles300x300mm (thickness to be specified by the manufacturer) of Ist quality conforming to IS:15622 of approved make in colours such as white,Ivory,Grey,Fume,Red Brown,laid on 20mm thick cement mortar 1:4(1cement:4 coarsesand) @ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete

Labour for cutting old mosaic or precast terrazo tiles including cost of removing dirt, rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curring, taxes and royalty all complete as per building specification and direction of E/I.

Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacturer,over the plastered wall suface to prrepare the surface even and smooth complete.job as per direction of E/I.

Providing &Applying high quality acrylic modified resin based texture of Dholpur/Red sand stone patter with anti algae and Uv resistace properties to be aapplied as intermediate fiish in desired pattern @ 43.04 kg/s10 sqm to form film of 1-1.15mm thickess after scrapping and propperly cleanig the surace to remove loose particles from the plaster surface,followed by top coating with premium acrylic smooth exterior paint with silicoe additives of required shade by two or more cots @ 1.43 litre/10sqm,complete as the direction of E/I.

Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I.

Suppling, fitting and fixing good quality, well dressed and well seasoned sal wood work in chaukhat in doors, windows, skylight, fanlights and celetial windows openings, including wedge over clamps all complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all complete as per building specification and direction of E/l

Supplying, fitting and fixing 38mm , thick good quality well dressed and well seasoned sal wood battened shutters ledged and braced in doors and windows with oxidised iron fittings such as hinges, sliding door, bolts, tower bolts, handled or rings, hooks and eyes, cleats, sand blocks as per schedule, taxes and royalty all complete as per building specification and direction of E/I.

Supplying and fixing rolling shutters of approved make made of required size M.S. laths interlocked together through their entire length and jointed together at theend by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs manufactured from high tensile stell wire of adequate strength conforming to IS 4454- part 1 and M.S..top cover of required thickness for rolling shutters.

80x0.90mm M.S.laths with 0.90 mm thick Top cover

Providing and fixing factory made single extruded WPC(wood polymer commposite)solid door/window/ceosetorywindows & oather frames/chowkhat comprising of virgin PVC polymer of K value 58-60(suspension Grade),calcium carbonate and natural fibers (wood powder/rice husk/wheat husk)and non toxic additives(maximum toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having miniumu frame density of 750kg/cum and scew withdrawal strength of 2200N(Face)&1100 N(Edge),minimu compressive strength 50N/mm2,modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof,water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/ S.Sdash fastenders of required dia and length complete as pr direction of E/I.,(Note -WPC solid doors/window frames,minus 5mm tolerance in dimensions i.e.depth and width of profile shall be acceptable variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made( frame size 65x100 mm)

Providing and fixing factory made single extruded WPC(wood polymer composite)solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60(suspension Grade),calcium carbonate and natural fibers(wood powder/rice husk/wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/cum and screw withdrawal strength of 1800B(Face)&900N(Edge) minimum comprressive strength 50N/mm2,modulus of elasticity 850N/mm2 and resistance to spread of flame of class A category with properly of being termite/borer proof,water/moisture proof and fire retardant and fixing with stainless steel butt higes of rquired size with necessary full body threaded star headed counter sunk S.S.screws,all as per direction of E/I(note-stainless steel buitt hinges and necessary S.S.screws shall be paid separeately) 35mm thick.

Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.

waterproofing for old land new roof slab providing and laying water proofing treatment on roof slab by applying two component factory designed ready to use acrylic modified flexible materials applied with brush,roller or spray for water proofing coating as per manufacturer specification with foollwing items.

a)surface prepaation-providing and cleaning of concrete surface to remove dust oil grease including removal of existing loose paint/coating and cement laitance by cleaning with compressed air & water jet including all materials,labour,tools complete ponding test to be done after plugging all outlets and to be checked from soffit to indentity seepaage,leakage.On indentification of seepage,cement grouting to be done with non shrink expanding admixture of sika India Pvt.Ltd/MYK schomberg/Dr.Fixit/Fosroc or equivalent.Providing and reparing of all conners and joints such as those between the parapet wall and the roof slab etc.shall be chamfered with 150mmx150mm fillet of mortar cement sand a:4) admixed with acrylic polymer of sika/Foscroc/MYK schemberg/Dr.Fixit or equivalent.Before chanfering surface irregularities,damaged concretein base slab,dead cracks if any,with anyt acrylic polymer modified repair mortar including a coat of bonding agent of the same with lkcement shutty including all materials,labour tools commplete.

(b)Ist coat-Applying Ist coat of two compnent acrylic modified ready to use flexible component mataerials on surface salurated dry roof and side wall of parapet wall upto 600mm by brush or roller after Ist coat of application 45 grm of Fibre glass cloth to lay when the first layersis-do- will be maseured.

(C) 2nd coat to apply the 2nd coat of two compounent anylic modified ready useFlexible cementitious materials right angle to the Ist coat over the glass fibre laid surface,2nd kcoat should be applied @ 0.7kg/sqmt/coat .For the purpose of measurement the entire treated surface will be measured.After kthree days of drying the 2 nd coat,The rain water outlets to be plugged and ponding ktest to be done for 48 hours to indentity seepage,leakage from soffit and if found necessary rectification to be deon as per ksatisfaction of E/C.The waterproof coating to be protected from damgae before screed over it.Water proofing coating to be protected from damgae before screen over it.Water proofing Brand sika Topseal 109hi/Fosroc Brushbod RFX/Dr fixit pidifin 2K/MYK Auafin TG.Product performance chemical,Base part A,Acrylic copolymer,PartB-speciaally graded cementtitios powder Density 1.6 kg/1(,oxed demsotu)at

(d)Protection of treapled surface with PCC-The treated surfaace should be covred with 25mm to 50mm PCC of M20 grade(1:1.5:3) with proper slope(1:120) towards the rain outlet in of 2mtx2mt keeping 6mm gap between the paned joint intergal water proofing admixture conforming to IS 2645 @ of 100ml per bag of cement to be added in the acreed concrete (paid outlet and concerte surface should be packed properly with rich concree and kthe kperipheral mouth to be sealed with moisture insentive epoxy putty of sika India pvvt.Ltd/MYK.schemberg/Dr.Fixit/Fosroc.For the pupose of measurment kthe enite treated surface will be measured;

(e) Grgove of PCC surface should be filled with polysulphide seallant(paid separately)Brand-sika India Pvt Ltd/MYK schomberg/Dr.Fixit/Fosroc warantly for five years.

covering of trreated surface with P.C,C .Providng 50mm thick cemet concrete M20(1:1.5:3)maintaing slope in alternate 2mtx2mt panels with approved quality of stone chips of 20mm to 6mm sizie graded and cleaned sand of F.M 2.5 to3 includig screening,shuttering and mixing cement concretein mixer with admixture of integral water proffing and placing in position,skirting curing,taxes and royalty all complete as per buidings specification and direction of e/I.panels that has been left should be casted next day.there should be 6mm gap between panels Brand sika plastocrate plus,MYK proof WP 10,FOSROC CONPLASTX421 ICX dR.fIXIT PIDIPROOF lW+-do-all complete job(old surface)

Providing and filling of 6mm thick Groove beetween 25mmPCC panels with polyesulphide sealant (poring Grada) as per drawing and technical specification and direction of E/I with 18% GST) Brand sika polysulphaide foasroo thioles Cood Dr.Fixit pidiseal PS(42P)MYK seal PS or Etrivlent.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion(i)single socketed pipes.

110mm diameter

Providing and fixing on wall face unplasticised PVC moulded fittings, accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring confirming to I:5382 leaving 10mm gap for thermal expansion.

Coupler 110mm dia

Bend 87.5° 110mm

shoe(plain)110mm dia

Providing and fixing on wall face unplasticised PVC pipe clips moulded fittings, accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring confirming to I:5382 leaving 10mm gap for thermal expansion.

110mm dia

Providing and fixing factory made Upvc glazed /wire mesh windows/vdors comprising of lead free uPVC multi-chambered fame and mulion(where eve required)extruded profiles having minimum wall thickness of 1.70mm for series R1 and R2 profiles and 2.10mm for series R3 and R4 profiles conforming to EN 12608 in any shape,colour and design duly reinforced with galvanized mild steel section made of required shape &size as prCPWD specification,UPVC extruded glazing beads,interlocks and inline sash adaptor ( where ever required) of appropriate dimensionEPDM gasket,hardware,SS 304 grade fasteners of miniumi 8mm dia with countersunk head,comprising of matching kpolyamide PA6 grade sleeve for fixing frameto finished wall asper IS 1367:part 1 to 14,plastic packers,plastic caps and necessary stainless steel screws etc Profile of frame,sash &mulion ( if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all comers,including drilling of holes for fixing hardware and drainage of water etc.After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality all compelte as per approved drawig conforming to CPWD specification and direction of E/I

Using R4 series withframe (115mm& above)x(45mm&above)& both glazed and fly screen sash (44mm &above)x(55mm&above) with zinc alloy(zamak)powder coated handle on every glazed panel along with multi point locking ksystem(height above 1.8m)

Providing and fixing glazing in aluminium door, windows ,ventilator shutters and partitions etc with EPDM rubber/neoprene gasket etc complete as per the architectural drawings and the directions of E/I.(cost of aluminium snap beading shall be paid in basic item) with float glass panes of 5.0mm thickness(weight not less than 12.50kg/sqm)

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.

Providing 250mm. Wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 250mm apron including cost of eartwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I.

Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and asdirected by Engineer-in-charge.

12.5 mm thick square edge PVC Laminated Gypsum Tile ofsize 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)

Centering and shuttering including strutting, propping etc. and removal of form forWeather shade, Chajjas, corbels etc., including edges

Providing and fixing 18mm thick Gang saw cut mirror polished, pre molded and pre polish machine cut for platforms, vanity counters windows sills, facials etc of required size shade colour, texture over 20mm thick base cement mortar 1:4(1 cement:4 coarse sand) with joints treated with white cement ,mixed with matching pigment, epoxy touch ups ,including rubbing, curing etc. complete at all levels. Granite any colour,area of slab over 0.50sqmm

Providing and fixing alumiunum work for door ,windows ,ventilators and partitions with extruded built up standard tubular sections, appropriate z sections and other sections of approved make conforming to IS:733 and IS:1285,fixed with dash fasteners of required dia and size including necessary filling up the gaps at junctions,i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc.Aluminium sections shall be smooth, rust free, straight ,mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling C.P. brass/stainless steel screws .all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing and paneling to be paid for separately) Anodised aluminium (anodised transparent or dyed to requireid shade according to IS:1868,Minimum anodic coating of grade AC 15)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing factory made Upvc glazed /wire mesh windows/vdors comprising of lead free uPVC multi-chambered fame and mulion(where eve required)extruded profiles having minimum wall thickness of 1.70mm for series R1 and R2 profiles and 2.10mm for series R3 and R4 profiles conforming to EN 12608 in any shape,colour and design duly reinforced with galvanized mild steel section made of required shape &size as prCPWD specification,UPVC extruded glazing beads,interlocks and inline sash adaptor ( where ever required) of appropriate dimensionEPDM gasket,hardware,SS 304 grade fasteners of miniumi 8mm dia with countersunk head,comprising of matching polyamide PA6 grade sleeve for fixing frameto finished wall asper IS 1367:part 1 to 14,plastic packers,plastic caps and necessary stainless steel screws etc Profile of frame,sash &mulion ( if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all comers,including drilling of holes for fixing hardware and drainage of water etc.After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality all compelte as per approved drawig conforming to CPWD specification and direction of E/I

Casement Door with double Rebate Frame with one side Hung glazed paneland one side Hung wire mesh panel with zinc alloy(zamak) 3 D khinges,multi- point locking system with clinder,zinc alloy(zamak) powder coated handles on both sides of glazed panel and zinc alloy(zamak)powder coated hande along with multi point locking system on one side of fly screen panel.Using R3 series with frame(110mm & above)x(45mm &above)xglazed sash (55mm&above)x(85mm & above) & fly screen sash(55mm& above)x(65mm&above)(Height upto2.5metre)

Carriage of materials from nearest approved sources of supply including loading into trucks and unloading from trucks and stacking properly at work site as directed by the E/I.

Brick lead 8K.M(1K+7P)

sand lead 8K.M.

Stone Metal 20 km lead

Providing and fixing G.M. non return valve Horizontal / vertical type of approved quality as per specification and direction of E/l.

(A) Horizontal non return valve

(3) 25 mm dia wt not less than 375 gms

(B) Vertical non return valve

(4) 32 mm dia wt not less than 600 gms

Providing and fixing 15 mm dia and 45 cm. long P. V .C connection pipe with heavy quality brass coupling at both ends etc. all complete as per specification and direction of E/l .

Making holes in walls for laying G.I pipes and restoring the same after pipe laying as per specification and direction of E/l

(a) 125 mm thick wall.

(b) 250 mm thick wall.

Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/l.

(a) Glass shelf with C.P brass rail

2) 450x125mm glass shelf complete

(b) Mirrors of 6mm thick plate glass bevelled edge mirror including C.P brass revolving fittings, 3 mm plywood board and C P hinges to fix with mirror

(2) 450x300 mm size

Providing and fixing floor mounted,white vitreous china single piece,double traps syphonic water closet of approved brand/make ,shape ,size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system,including all fittings and ixtures with sat cover,cistern fittings nuuts,bolts and gasket etc including making connection with the existing P/S trap,complete in all respect as per direction of E/I.

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern,with fittings,standard size C.P.brass flush pipe,spreaders with unions and clamps ( all C.P.brass) with waste fitting as per IS: 2556 C.I.trap with outlet grating and other couplings in C.P.brass including painting of fittings and cutting and making good the walls and floors wherever requried. Range of four half stall urinals with 5 litre P.V.C automatic flushing cistern

Supplying materials and labours for constructing inspection chamber of designation class 75 B bricks size 750 mm deep, 600 x 450 internal dimension having 250 mm wall thickness in cement mortar ( 1:6 ) including 12 mm cement plaster ( 1:4 ) with punning on inside and cement plaster (1:6 ) with 600 x 475 mm G.I. cover with frame (Weight not less than 36 Kg.) in foundation and refilling all complete as per specification and direction of E/l.

Supply of NP2 R.C.C.Hume pipe with collar as per I.S.s.458-1971 grade including all taxes and duties all complete job.150mm dia R.c.C.pipe

Providing and fixing on wall face unplasticised PVC moulded fittings, accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring confirming to I:5382 leaving 10mm gap for thermal expansion.

Single Tee with out door

75mm dia

Providing and fixing Chlorinated polyvinyl chloride (CPVC)pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i.e. fixing the pipe with clamps at 1.m.spacing.This included jointing of the pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I. concealed work including cutting chases and making good the walls etc.(Internal work)(Exposed on wall)

25mm nominal outer dia pipes

32mm nominal outer dia pipes

Providing and fixing Chlorinated polyvinyl chloride (CPVC)pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i.e. fixing the pipe with clamps at 1.m.spacing.This included jointing of the pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I. concealed work including cutting chases and making good the walls etc.(Internal work)(Concealeld work)

15mm nominal outer dia pipes

20mm dianominal outer dia pipes

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Wiring for light/fan point/exhaust fan point/call bell Point with 1.5 sq.mm FRPVC insulated copper Conductor single core cable in surface/recessed PVC conduct with Modular type switchmodular plate, Suitable size G.I Box etc. as required.

group C

Twin control point wiring in PVC conduit withModular type switch-wiring for Twin control light point with 1.5sqmm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit 2 way Moodular type switch,Modular plate,suitable size G.I.boax and earthing the point with 1.5 sqmm.FRPVC insulated copper conductor single core cable etc as required.

Wiring for light / Power plug with 2×4 sq mm FRPVC in insulated copper conductor single core cable in surface / recessed PVC conduit along with 1 nos 4 sqmm. FR PVC insulated copper conductor single core cable for loop earthing as required .

Wiring for circuit/submain wiring along with wiring with the following sizes PVC insulated copper conductor, single core cable in surface/recessed PVC conduit as required.

2x1.5sqmm+1x1.5sqmm earth wire

2x2.5sqmm+1x2.5sqmm earth wire

2 x 6 sq mm +1 x 6 dsq mm earth wire

2 x 10sq mm +1 x 10 dsq mm earth wire

Supplying and fixing of following piano type switch/socket on the existing swith box/cover including connection etc as rerquired.

5/6amps,one way switch

3pin 5/6 amps,socket outlet

Electroniic step fan rregulator,deluxe

Providing and fixing following DP/TP&N sheet metal switch disconnector fuse unit in the existing metal board with rewireable type fuses,including drilling holes in metal board ,making connections etc. as rrequired.

32 amps double pole

100 amps,TP&N

S/F following capacity busbar chamber with 4 strips of length 300mm made of copper suitable for following,capacity complete with all accessories including connection,earthing the body etc as reqd..

S/F Brass batton / Angle Holder including connection etc as reqd

S/F”B” series SPMCB: supplying and fixing 6 amps to 32amps rating,240 volts ,10KA,"B" curve, ,miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections ,testing and commissioning etc as required.

6/32 amps,single pole."B" series

Supplying and faixing Following rating,double pole 240 Volts isolator in the existing MCD DB complete with connection testing and commissioning etc as reqd

S/F 2 Pin 5 Amp ceiling rose on the existing junction Box wooden block incuidng connection etc as reqd

Earthing with G.I.earth pipe 4.5 mtr lonng,40mm dia including accessories,and providing masonry enclosuire with cover plate having locking arrangment and watering pipe etc with charcoal or coke and salt as required.

Supply and fixing 9/10 watt LED Bulb including all complete job as per direction of E/I.

Supply Installation,testing and commissioning of follwing size ceiling fan 3 Bleades confirming to IS:374:2019 including wiring the down rods of standard length(upto 30cm) with 1.5 sqmm FR PVC insulated ,copper wire suitable for 230V 50Hz,single phase supply etc.complete as required.

1200mm(48")BI DC 5 star rating 32W ceiling Fan

S.I.T.C of floowing rating LEDstreet lighting luminate with pressure die cast housing and toughenee glass cover(IP 66 protection) in existing pole/pipe for supply voltage 100-270V AC.50Hz Luminarie shall be confirm to IS:10322 Part 5/section-3 and shall be complete with all neccssary accessories as required

70/72W LED Street light

Supplying and faixing LED batten(20/22W) including all complete job as per direction of E/I.

S.I.T.C of floowing rating recess/surface mounted LED round/square shape down light Luminarie with prfessurfe die cast housing for single phase supply voltaage .Luminarie shall be confirm to IS:10322 Part 5/section-2 or JEC:62722 with all neccssary accessories as required

2'x2' LED panel light

Supply of 2.0 Tr.5 star High wall split A.C. unit of BEE 5 star Rating(Generally conforming to IS 1391 latest) inverter(variable speed)Heating Mechanism-Electric Heater,minium set Temperature 12 degree celsius,Maximum set Temperat5ure 40 degree clslus,Remote control,with oringinal compancy make out door structure including rigging of indoor out door units,pressure testing vacuumingising along with oringinal company make stand to fix out door unitk by suitable size of fasteners,copper pipes up to any length,insulating materials heavy duty PVC drain pipe each drain pipe schould be connected with building rain water drain pipe etc as required makke L.G.(inverter type) IS 1391-part-1 including all complete job.

Supply fitting and fixing of wall mount suitable capacity(4 KVA) Automatic voltage stablizr,voltage range 130V to 280V at copper wound Transformer along with suitable size of connecting 3 Mtr 3 core 2.5 sqmm Flexible copper cable (indoor unit to stablizer) Make V Guard/Totaline/Sen & pandit. including all complete job.

Supply of out door stand for 2 qtr splite AC including all complete job.

Supply of copper tube of size 1/2" for splite ac unit 1/1.5/2/3 tr capacity including nitride rubber all complete job.

Supply of sitc drain water pipe insulation 20mm including all complete job.

Supply of metal Exaust Fan 12"(300mm) including all complete job as per direction of E/I.make Bajaj/crompton/Havells.)

Providing and fixing 12mm thick(Green plywood green panel ISI mark,Termites)on existing Door Frame and pasting with 1mm mica(Green Décor) with material and labour all comlete as per building specification and direction of E/I.

Providing and fixing 6mm thick(Green plywood green panel ISI mark,Termites)on existing Door Frame and pasting with 1mm mica(Green Décor) with material and labour all comlete as per building specification and direction of E/I.

Procourement and Installation of Jaquar 20mm pillar Mounting combination TopAssembly conforming to IS:8931:Latest Jaquar Make including all complete job.as per direction of E/I.

Procourement and Installation of Jaquar 15mm Brass Fancy Top Jaquar (Jaquar Angle stop cock/vlave 15mm florentine FLR CHR 5053N)Product id : 5116877-80707130904)including all complete job.as per direction of E/I.

Procourement and Installation of Home structures and Building and construction and Manufocturing components and supplies plumbing fixtures Faucets or top copper Alloy Fancy Taps for Bathroom as per IS 8931 Latest(Q3 category)Jaquar 20mm Brass Fancy Tap including all complete job.as per direction of E/I.

Procourement and Installation of Home structures and Building and construction and Manufocturing components and supplies plumbing fixtures sanitary ware Bathroom water shower (Q3 category)Jaquar Bathroom Hand shower ABS Plastic Product id:5116877-61545505248 including all complete job.as per direction of E/I.

Procourement and Installation of Home structures and Building and construction and Manufocturing components and supplies plumbing fixtures sanitary ware Bathroom ware Bathroom Jaquar 15mm Brass fancy Top Jaquar(wall mixer with over Head shower) including all complete job.as per direction of E/I.

Procourement and Installation of Home structures and Building and construction and Manufocturing components and supplies plumbing fixtures non sanitary residential fixtures towel Rail/Ring for Bathroom (Q3 category)Jaquar Towel Ring stainless steel(SS 304) (CP Brass toilet paper holder ACN 1153N Jaquar) including all complete job.as per direction of E/I.

Procourement and Installation of Jaquar vitreous china sinks/wash Basins Flat Back and square Jaquar R (LYS WHT 38931)Product Id: 5116877-71859610321 country of Origin:India including all complete job.as per direction of E/I.

Procourement and Installation of Jaquar waste fittings for size 32mm for washbasin Jaquar (450mm long Braided Hose with two 15mm nuts ALD 805B)ncluding all complete job.as per direction of E/I.

Procourement and Installation of Jaquar waste fittings for size 32mm for washbasin Jaquar ( WASTE COUPLING 32MM ald 709 Jaquar)including all complete job.as per direction of E/I.

Procourement and Installation of Jaquar liquid soap dispenser capacity 500militer Jaquar (dispensor push button) product Id 5116877-92463669776 )contry of origin:india including all complete job.as per direction of E/I.

Procourement and Installation of Jaquar 15mm Brass Fancy Top jaquar 15mm Bib Taps conforming to IS 8931:latest jaquar) including all complete job.as per direction of E/I.

Add 18 % GST (in Basic Rate must fill 12)

Add 1% Labour Cess (in Basic Rate must fill 1)

JAGDISH MANJHI