Providing 3 Nos of 9m poles (with available Materials) on terrace of Building at Non-BSNL site, Sri Sai Geetha Lodge, Anasari Colony Opp. Bus station (NG5112), Nalgonda.

Amount

1). Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing :

(a). 1:1½:3 (1 cement : 1½ coarse sand(zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources).

2). Cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :

(a). 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

3). Centering and shuttering including strutting, propping etc. and removal of form for all heights:

(a). Foundations, footings, bases of columns, etc. for mass concrete

4). Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand)

5). Supplying and welding Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

6). Supplying of bolts including nuts and washers complete.

7). Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :

(a). Two or more coats on new work.

8). Extra for galvanizing (of thickness not less than 120 microns) on M.S angles , flats, gussets plates, bolts, nuts and other fasteners.

9). Providing and fixing anchor fastners (expansion fastners) of approved quality including drilling holes in RCC and fixing complete

(a) 16 mm dia and 100mm length

(a) 12 mm dia and 100mm length

10). Erection of Galvanised M.S 9.00 M poles (Supplied by Department at Free of Cost) on terrace with supporting structure as per the design and as directed by the engineer-in-Charge ( Anchor fasterners and bolt & nuts will be paid separately)

11). Transportation of Galvanised MS 9.00 M poles including supported angles etc from BSNL stores at Nalgonda premises to work site at Anasari Colony, Nalgonda premises. Cost includes lifting , loading, transportation and unloading at work site and as directed by Engineer-In Charge.

12). Providing and supplying heavy duty injection adhesive for fixing threaded bolts in wet/dry conditions HILTI RE500 for dia upto 40mm of HILTI India Pvt. Ltd. The system to be made of two foils consisting of resin and hardener foil pack. The system can be used for fixing threaded bolts viz HAS-E-M8 to 39 rods. The cost inclusive of material, epoxy fasteners, drilling holes in concrete etc., complete as directed by Engineer-In Charge.

(a). 16mm dia epoxy based anchor fasteners