SPL REPAIR REPLACEMENT OF OLD UNSV BATTEN ALUMINIUM WIRING TO CONCEALED COPPER WIRING OF BLDG NO P 07 MAIN OFFICE T 11 T 5 T 21 T 18 T-9 T-3 OTM AND STORES ACCN OF RRRC AND SPL REPAIR REPLACEMENT OF FAN GEYSERS AGAINST BER UNDER GE CENTRAL DELHI C

Amount

Taking down carefully copper/aluminium point wiring from wooden battan/ conduits or from the wall by chasing/cutting (light, fan, socket or power) completely including (fittings such as switches, ceiling roses, pendants, regulator, sockets etc. to be measured separately) and making good disturbed surfaces of walls, floor etc.

M&L point wiring with PVC insulated FRLS 1100 Volts unsheathed cable 1.5 Sqmm multistranded copper conductor and drawing concealed in wall & including rigid PVC conduit FRLS, medium grade ,ISI marked ,terminal box of 1.6 mm thick and 3 mm thick hylam sheet cover for terminal boxes or fabricated branded modular metal flush box duly make embossed, also including porvision of earth wire PVC insulated FRLS 1100 Volts unsheathed 1.5 sqmm stranded copper conductor single core cable connected to common earth dolly the following :

(a) One light/fan point/socket on independent board controlled by one by one way switch

(b) One bell point controlled by one by one way switch

(c) -ditto- as above item No 2 (c) but Same board.

M&L point wiring with PVC unsheathed multi stranded copper conductor cable 4 sqmm FRLS 1100 Volts in New PVC concealed conduit in new M S steel terminal boxes modular/terminal box of 1.6 mm thick and hylam sheet cover including one run of using 4 sqmm FRLS 1100 Volts copper conductor cable as earth continuity connected to common earth for one power point, all as specified and directed by Engr-in-Charge.

M & L Submain wiring with two run single core 1.5 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 volts grade in and including PVC conduit ISI marked conealed alongwith one run of 1.5 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main DB and testing on completion etc complete all as directed. Note: Three runs of 1.5 sqmm cable and one run of PVC conduit shall be measured as one RM.

M & L Submain wiring with two run single core 4 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 volts grade in and including PVC conduit ISI marked concealed alongwith one run of 4 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main DB and testing on completion etc complete all as directed. Note: Three runs of 4 sqmm cable and one run of PVC conduit shall be measured as one RM.

M & L Submain wiring with two run single core 6 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 volts grade in and including PVC conduit ISI marked concealed alongwith one run of 6 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main DB and testing on completion etc complete all as directed. Note: Three runs of 6 sqmm cable and one run of PVC conduit shall be measured as one RM.

M & L Submain wiring with two run single core 10 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 volts grade in and including PVC conduit ISI marked conealed alongwith one run of 10 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main DB and testing on completion etc complete all as directed. Note: Three runs of 6 sqmm cable and one run of PVC conduit shall be measured as one RM.

M & L for in replacement only single core PVC insulated cable 1.5 Sqmm FRLS 1100 Volts with copper multi stranded conductor and drawing in surface/walls, all as specified and directed by Engr-in-Charge.

M&L switch Modular type 6 Amps, SP one way 230V AC complete all as specified and directed by Engineer in charge.

M&L Modular socket outlet 5 pin 6 Amp socket 2 module complete all as specified and directed by Engineer in charge.

M&L switch bell push Modular type 6 Amps 1W-1 module, 230V AC complete all as specified and directed by Engineer in charge.

M&L switch Modular type 16 Amps 230V AC complete all as specified and directed by Engineer in charge.

M&L Modular socket outlet 5 pin 6/16 Amp universal socket 2 module complete all as specified and directed by Engineer in charge.

Supply & Fix Modular five stepped type electronic fan regulator 2 module 360 degree rotatable type 230V AC complete all as specified and directed by Engineer in charge.

M&L switch Piano flush type 5 Amp SP one way all as specified and directed by Engr in Charge.

M&L switch piano flush type 15 Amp SP one way all as specified and directed by Engr in Charge.

M&L socket outlet 5 pin 5 Amp flush type all as specified and directed by Engr in Charge.

M&L socket outlet 2 in 1,3 pin 5/15 Amps all as specified and directed by Engr in Charge. Make:-

Supply and fixing ceiling rose, 6 Amps, 230 volts, AC, ISI marked with three equal size terminals and PVC / Polycarbonate insulated body of 50 x 25mm size complete all as specified & directed.

S & F electronic fan regulator 5 step 360 degree rotation connecting complete all as specified

M&L bell ding dong AC,230 volts,single pole all as specified and directed by Engr in Charge.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amp, 240 Volts all as specified and directed.

Disconnecting elect connection and taking down of ceiling fan / Exaust fan/fresh air fan of any make and any height, dismantling blade and removing fan alongwith blade for depositing in MES store yard complete all as specified and directed by Engr- in- Charge.

M&L angle Lamp holder with metallic ring, PVC/Polycorbonate type with back plate complete.

Supply and fixing in repair LED batten luminaire surface mounted 4 feet system wattage of 22 Watts with lifetime of 50000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 100 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed.

Supply and fixing in repair LED batten luminaire surface mounted 2 feet system wattage of 12 watts and not less than 1000 lm with life time of 50000 burning hours with 70% of its initial lumen maintained. CRI > 80, power factor > 0.95, THD < 10%, color temperature > 6500 K , surge protection 2.5 KV in CM IP- 20 protected meets LED IS specifications, Class - 1, SDCM <5 short circuit and over circuit protection, voltage range - 150 to 270 volts AC, temperature range 0 to 50 Degree C, system efficiancy at luminarie level ≥80 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire fixed complete all as specified and directed.

Supply and fix in replacement of LED 2 X 2 ft backlite surface mounted fitting 40 Watts not less than 3200lm with Metallic CRCA powder coated body with high efficiency opal/PMMA diffuser with system efficacy > 80 lm/W, CRI>80, color temperature >5700k, IP 20, Power factor<0.95, THD<10%, 50000 burning hours , Ambient temperature 0 to 500 DegC, Driver should meet IEC complaint for safety, with voltage variation range of 150-270 V and surge protection of 2.5 KV including necessary fixing arrangementsfixed complete all as specified and directed.

Supply and fix in replacement of ceiling recessed/surface mounted down light fitting 15 watt (Square/Round) with die cast aluminium housing and system wattage of 15W, system efficiency at luminary level ≥ 80 Lumens/watt, 50000 burning hours, 6500K color temperature with CRI >80, Power Factor > 0.90, Driver should meet IEC compliant for safety with multi stage high Isolate CC-CV operated driver with voltage variation range - 150 to 270 Volts AC, and surge protection of 2.5 KV, and including connecting up with PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and directed.

Supply and fix in replacement of ceiling recessed down light fitting 8 watt with die cast aluminium housing and system wattage of 8W, system efficacy at luminary level ≥ 80 Lumens/watt, 50000 burning hours, 6500K color temperature with CRI >80, Power Factor > 0.90, Driver should meet IEC compliant for safety with multi stage high Isolate CC-CV operated driver with voltage variation range - 150 to 270 Volts AC, and surge protection of 2.5 KV, and including connecting up with PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and directed.

Supply and fix in replacement of LED 1 X 4 ft backlite surface mounted fitting 36/40 Watts not less than 3200lm with Metallic CRCA powder coated body with high efficiency opal/PMMA diffuser with system efficacy > 80 lm/W, CRI>80, color temperature >5700k, IP 20, Power factor<0.95, THD<10%, 50000 burning hours , Ambient temperature 0 to 500 DegC, Driver should meet IEC complaint for safety, with voltage variation range of 150-270 V and surge protection of 2.5 KV including necessary fixing arrangementsfixed complete all as specified and directed.

Supply and fix 12 watts bulkhead fitting with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover, IP65 Protection, System level efficacy of the Luminary is > 90 lm/W with a life class of 50,000 burning hours at L70 criteria, Power Factor >0.95, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficiency >85%, THD<10%, CRI>80, Color Temperature-6500K, Surge protection of 4.0 KV, including connecting up with necessary PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and directed.

Supply and Fix 45 W High efficient LED Street light fitting with pressure die cast LM6 Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the Luminarie is 100lm/W with a life class of 50,000 burning hours at L70. The color temperature is around 6500 K with a color rendering index of 70. The luminaire is IP:66 protected with IK05 impact resistance. It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 120-270V, THD<20%, High and low protection along with a surge protection of 4 KV including 40mm dia GI light grade pipe1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on pole fixed complete as specified and directed.

S & F wall mounting air circulator fans AC single phase 230/240V, 1440 RPM heavy duty of size 600 mm sweep(24"), 180 Watt , aluminium alloy three blade , double ball bearing 90 oscillation , sturdy close-mesh guard beautiful designed, powerful heavy duty motor, air delivery 270 m/Min, mounting on wall complete all as specified and directed by Engr-in-charge.

Supply & fix fresh Air fan 250mm sweep with louvers including connecting with suitable size of copper conductor from ceiling rose to fan and making hole of suitable size and matching with the existing coloure of wall complete all as specified and directed.

S & F LED bulb 9 watts, 900 lumens output, 6500K suitable for B-22 base all as specified and directed.

S&F fan hook set fabricated out of zinc coated MS flat iron heavy duty ot fix in roof with suitable size of anchor fastener etc. complete all as specified and directed.

Taking down old unserviceable down rod and supply and fix 2 mtr long down rod duly made out off Mild steel including taking down & refixing of existing ceiling fan of any sweep and make and making connection from ceiling rose to PVC connector complete all as specified and directed.

Suppy and fixing Tringular bulkhead green & red and connected assesories complete all as sepecified and directed by Engr-in Charge.

M&L opening up the winding of ceiling fan 1200/1400 mm sweep any make and type and rewinding with super enamelled copper winding wire,wraping insulating material, insertion and varnishing well including drying & testing of the ceiling fan to the entire satisfaction of GE complete all as specified and directed.

M & L for earthing complete with galvanized steel earth plate 600x600x6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to earth lead GI 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade 15mm bore for earthing lead, wire mess, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1(using 20mm dia stone aggregate) reinforced with 6mm dia round bar @ 75mm cement concrete both always with MS handle 12mm dai and frame all as shown in electric plate No 3 in page 497 of SSR Part I (2009) including testing ion completion all as directed

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 230 volts, 08 way, with 200 Amps rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified directed.

Supply and fixing MCB, SPN, AC, 230 volts of 40 Amps capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.

Supply and fixing MCB, SP, AC, 230 volts of 06 to 32 Amps capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.

Supply & fix in repair factory made epoxy powder coated Load line Distribution Board TPN-4 ways with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including insulated 200 Amp copper bus bar, Isolated neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts and suitable for one TPN- MCCB 125/160 Amp as incomer and 32 to 63 Amp SP MCBs outgoing complete all as specified and conforming to IS : 8623. complete all as specified and directed by Engineer in charge. Make:- Legrand/ IndoAsian/Havells/BANELO

M&L MCCB 125 Amps, 4P, 415 volts 16 KA 50 HZ with thermal magnetic setting all as specified and directed by Engr -in Charge.

Supply and fixing XLPE insulated armoured, PVC sheathed heavy duty electric cable 1100 vots grade with aluminium conductor conforming to IS:7098 , laid in trenches /ducts/fixed to wall /roofs/poles all as spcefied 4 core 25 sqmm.

Supply and fixing ceiling fans three blade, Robust and reliable invertor motor (bush less DC motor) powered by ECM technology, BEE 5 star rating for energy saving, ISI mark, rated Air delivery >220 cum/min, service value > 6 AC single phase 230/240 V of size1200 mm sweep. The BLDC motor fan shall have 100% rust free blade, high Air flow with silence operation, having full copper motor winding including making connection with three core 0.75 sqmm flexible, copper cable PVC insulated of suitable length, complete all as directed.

S & F water heater storage type Geyser vertical type with suitable size of fastner and incl provision and connecting up of SS braided pipe with adopter for inlet and outlet water connection having adjustable knob for temperature control and inner steel tank should be glass line coated tank and outer body material of ABS with high pressure with standing enabling (up to 8 bar pressure) capacity, 25 Ltrs having heating element 1.5 KW and not less than 5 star rating suitable for 230 Volt, 50 Hz electric supply complete all as specified and directed.

somyaenterprises

M/S ANIL KUMAR

NEETU TRADERS (INDIA)

GCVD INFRATECH PVT. LTD.