Comprehensive Maint of SMQs of BR Works at Nandani Complex, Pushap Vihar area and Pump House Area at AF Stn Bhisiana

Amount

Taking down cement or cement lime plaster, any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc.

Material and labour for 15mm thick cement plaster in CM (1:4) on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc.

Material and labour for 15mm thick cement plaster in CM (1:6) on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc.

Material and labour for 10 mm thick cement plaster 1:3 on fair faces of brick work or concrete surfaces in ceiling complete.

Material and labour for preparation of new plastered surfaces and applying two coats of cement base paint complete all as specified and directed.

Material and labour for prepration of new plastered surfaces of Ceiling and applying three coats of white wash on Ceiling surfaces complete.

Material and labour for preparation of new plastered surfaces and applying two coats of oil bound distemper complete all as specified and directed.

Material and labour for preparation of new plastered surfaces and applying two coats of white wash on wall complete all as specified and directed.

Complete removal of existing treatment, preparation of old concreted surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitening complete

Complete removal of existing treatment, preparation of old concreted surfaces of walls applying two coats of cement base paint complete all as specified and directed

Demolition of cement concrete in ground floors and paving n.exc 15 cm thickness (below or above ground level) and removal of debries from MD land complete (Note : Demoltion consider for Item No. 12, 13 & 17).

Material and labour for 75mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in plinth protection finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed.

Material and labour 75 mm thick Cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base to paving complete.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

Material and labour Screed bed or bedding layer of 15mm thick in cement mortar (1:4) for laying floor finishes

M&L Glossy Designer Coloured Chequred cement concrete tiles 30cm x 30 cm x 20 mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement pigment Note :- Design and Pattern as approved by GE.

M&L for machine pressed precast concrete interlocking paver block any shape and size size conforming to IS-15658-2006 of 60mm thickness M-35 Grade with grey cement and pigment complete all as specified and as directed by the Engr-in-Charge.

M&L for sand cushning 25mm thick for interlocking tiles complete all as specified and as directed by the Engr-in-Charge.

Material and labour 12-15mm thick green marble slab flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab one side bullnosed including dismentling existing slab etc completed.

Material and Labour 12-15mm thick green marble in riser of steps, skirting, dado and pillar with one side bullnosed laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including dismantling of existing stone etc completed.

Material and labour Coloured Non Skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.

Material and labour Coloured Glazed ceramic tiles in vertical surface 350x250x7 mm/ 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete.

M&L for Rectified Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles.

M&L for Rectified Ceramic tiles 7 to8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm,on vertical surfaces as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles.

Material and labour Rendering 10 mm thick cement plaster 1:3 on fair faces of brick work or concrete surfaces, including finishing the surfaces even and fair to receive the wall tiles etc all as specified and as directed.

Taking down Chowkhats or frames not exc 1.5 Sqm each (without taking off shutters from the frames).

Shutters of any description exc 1 sqm but not exc 2 sqm each taking down and refix in the same opening after easing and cutting in required length and width with necessary screwing and nailing if required complete all as specified and directed.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawing .

Factory made solid panel PVC door shutter 30mm thick (stile), consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification and drg.

S&F 100mm size PVC butt hinges all as specified.

S&F 100mm size PVC handles all as specified and directed.

S&F 150mm long PVC tower bolt all as specified and directed.

Supply and fixing in repairs box type steel ventilator glazed & gauged factory made with side hung shutters including box type hinges with steel handle and steel peg stay, necessary grills and guard bars and 4mm thick froasted glass including taking down existing window and making good the disturbed portion with PCC or Plaster and painting the surface to match with the existing surface complete.

M&L applying Two coats of Synthetic enamel paint over a coat of red oxide including prepration of new or previously untreated steel surfaces of any description not otherwise described over 10 cm width or girth complete.

Hacking out old broken glass any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins / spring clips and providing and fixing new ones complete.

Supplying and fixing sheet glass 3mm thick ordinary quality and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 Sqm in each pane complete.

Supplying and fixing figured glass 4mm thick, pin head type and glazing with oil putty in square not exc. 0.5 Sqm in each pane complete.

Supply and fixing as in repairs Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tack or galvanised wire staple complete.

S&F 75mm dia Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) but as in repairs.

S&F 75mm bore (Sand Cast) Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors or fixed to walls but as in repairs.

S&F 100mm bore (Sand Cast) Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors or fixed to walls but as in repairs.

S&F 75 mm bore CI Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access door as in repairs.

S&F 100mm bore CI Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access door as in repairs.

S&F 75 mm dia CI bends (any radius), diminishing pieces or tapers provided with access door in repairs.

S&F 100 mm dia CI bends (any radius), diminishing pieces or tapers provided with access door in repairs.

M&L taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store.

Material and labour 15 mm dia tubes medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store.

Material and labour 20 mm dia tubes medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors.

Material and labour Vitreous china squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests complete including provision of lime concrete bedding as in repairs.

S&F in repairs china wash down water closet padestal pattern white excluding flush and fix to position including connection to drain pipe etc complete all as specified and directed.

S&F plastic water closet seat cover white close pattern with flat bottom complete all as specified and directed.

S&F as in repairs 100 mm bore Traps 'P' or 'S'.

Material and labour Flush pipe of Polyethylene of low or high density or PVC 32 mm dia, for low level cistern.

Material and labour PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets fixed as in repairs.

S&F in repairs Vitreous China wash basin, white, flat back, size 550x400mm fixed on existing brackets or stands all as specified and as directed.

S&F in repairs 15mm dia Pillar taps fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and flu-nuts screwed for iron pipe.

S&F in repairs 15 mm bore Stop Valve fancy type chromium plated with long shank and cup (concealed type), cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed in repairs.

M&L as in repairs for stop valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipes or for union and fixed to 20mm dia of pipe.

S&F PVC connections 15 mm size with PTMT nuts of length 450mm.

S&F Aluminium anodised Tubular towel rail, 20mm dia, D type, 60cm long between flanges fixed in repairs complete.

S &F 15mm dia Bib taps, fancy type Chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed in repairs.

Material and labour 32 mm dia PVC Waste pipe for Wash hand Basin.

S&F Brass Chromium plated shower rose 125 mm size with or without swivel joints, including fixing to steel pipe or union in repairs.

S&F sinks made of stainless steel 1mm thick kitchen or labo-ratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brack-ets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm.

Supply and fixing as in repairs Kitchen Plate rack of size 900x600 complete.

Demolition of Brickwork or stone/ boulder masonary, built in cement mortar or cement lime mortar.

Material and labour for brick work built in CM (1:6) straight or curved on plan exceeding 6 metre mean radius using sub class ‘B’ bricks (Old size bricks) complete all as specified and as directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or reinforced concrete) set in cement mortar 100mm bore of pipe.

Supply and fixing 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with and including clamps, nut bolts including dismantling of old AC rain water pipe etc.

Supply and fixing 110 mm bore PVC (SWR) bends any radius complete all as specified and as directed.

Dismantling water tanks exc 250 Ltr and n.exc 500 Ltr and removing to store.

M&Lfor Rotational moulded polyethylene water storage tanks 500 ltr Capacity (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I.

20mm Ball valves, Brass high pressure of PTMT with polythene float and flynut complete crewed for iron pipe or brass ferrul and fixed as in repairs.

M&L for removing of bushes upto 10 cm dia trunk, grass from roof top, racking out joints/pointing to brick tiles and flush pointing with 1.3 cement mortar with water proofing compound, all as specified and directed.

S&F in repairs MS curtain rod 20 mm dia PVC Coated with fixing brackets and ends cap (latoo) complete all as specified and directed.

M&L for PCC (1:2:4) type B1 (20mm graded aggregate) as in repairs of chajjas, suspended slab etc including demolition with wooden hammer and necessary formwork complete all as specified and directed.

Dismantling asbestos cement (corrugated, semicorrugated etc) sheet in roof covering any gauge thickness and in any position including Nainital or similar pattern roof covering complete.

S&F prepainted galvaliume aluminium zinc coating based corrugated steel sheet 0.45mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

Excavation in post holes (or similar holes) each nexc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth or broken rubble mixed with earth around, in layers not exceeding 25cm watering and removing surplus soil to a distance n.exc 50m and making good surface in soflt/loose soil.

Dismantling of mild steel work of any description not otherwise provided for complete all as directed.

S&F Mild Steel angle/flat iron/channel framed work such as iron gate fencing posts and parking sheds complete all as directed.

S&F for joist channel, angle Tee Section of Fe-290 Gde E-165 fixed independently without connecting plate for cooler stand etc complete all as specified.

Demolition of cement concrete in any description and in any position not otherwise specifically provided for.

Material and labour 15 mm thick rendering in cement mortar (1:4) as in sunken portion mixed with water proofing compound 3% by weight of cement, finishing surfaces even & smooth without using extra cement complete all as specified and as directed. (Note :- water proofing compound shall be measured and paid separatly)

Supplying only integral water proofing compound ISI marked complete all as specified and directed.

Material and labour for bitumen blown any grade, applied hot, two coats, to concrete surfaces and sides of sunken floors at the rate of 1.5 Kg per Sqm per coat complete all as specified and as directed.

Material and labour for PCC (1:5:10) type E-2 using 40mm graded stone aggregate as in floor of sunken and mass concrete complete all as specified and as directed.

M/s Luxmi Constructions

M/s Vee Kay Associates

M/s Kamal Builders

M/s BALDEV SINGH