Karnataka

AOC

Works

Construction of Anicuts - Barrages

CONSTRUCTION OF MULTI-ARCH CHECK DAM ACROSS LOCAL NALA NEAR GUNALLI VILLAGE IN BIDAR TALUKA & DISTRICT

Minor Irrigation Department

Minor Irrigation Division Bidar | Karnataka

Amount: ₹44.4 LCloses: 25 Feb 2026Closed

Timeline

Published18 Feb 2026
Closed25 Feb 2026
Awarded—

Bids

1 Bid25 Feb 2026

#	Company	Amount	Status
1	SHIVARAJ SANGRAMAPPA ₹42.2 Laccepted-aoc	₹42.2 L	accepted-aoc

Tender Value

₹44.4 L

EMD Value

₹89,000

Closing Date

25 Feb 2026, 10:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Minor Irrigation Department

Contact Person

Executive Engineer

Office Number

Mobile Number

Work Description

CONSTRUCTION OF MULTI-ARCH CHECK DAM ACROSS LOCAL NALA NEAR GUNALLI VILLAGE IN BIDAR TALUKA & DISTRICT

Tender Information

Tender ID

MI/2025-26/AB/WORK_INDENT11038

Reference Number

MI/2025-26/AB/WORK_INDENT11038

Tender Type

Open

Product Category

Construction of Anicuts - Barrages

Form of Contract

Two Tender Document System(Two Cover)

Location

Minor Irrigation Division Bidar

Source Website

Subscribe to view

Documents Required

8 documents required · 8 mandatory

Technical Bid

RequiredContractors Registration Certificate

RequiredAnnual Turnover Certificate issued by the C.A

RequiredWork Done Certificate for executed quantity

RequiredSimilar Nature Of work done Certificate issued not below the rank of E.E

RequiredLine Of Credit

RequiredWorks on hand Present contract commitment

RequiredSection 3, Qualification Information.

RequiredAssess available tender capacity

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of KPPP portal due to internet connectivity issues and technical glitches at bidders end.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder.

The transaction fee is non-refundable if you wish to participate.

The tenders are invited as per Standard tender Bid Document KW-3

All relevant documents as per KW-3 need to be uploaded while submitting bid in general documents provision in KPP Portal portal.

Conditional tender will not be considered.

Sub - leasing /G.P.A of work is prohibited.

The employer reserves the right to accept or reject any or all tenders without assigning any reason.

The increase if any in the GST shall not be paid in the extended period of contract for which the contractor alone is responsible for delay as determined by the Authority.

The contractor has to furnish additional security deposit for unbalanced tenders in accordance with clause 25.5 of ITT & Clause 44 of the conditions of contract for all works, in addition to 5% performance performance security while executing the Agreement.

All materials like steel, cement etc., required for the above work should be procured by the contractor only at his own cost. And these materials will have to be got tested by the competent authority before put to use and certificate shall be submitted.

The necessary certificates / documents in support of eligibility criteria fulfilled as stipulated shall be scanned and attached duly attested to e-tender document. The original certificates/document shall be produced on or before stipulated date and time for verification. Scanned signature of bidder/authorized representative of the bidder shall be attached while up loading bid document.

During the execution of works, if any minor mineral are required, contractors have to abide by the Karnataka Minor Mineral Concession Rules 1994(as amended upto date). As per the previlling rules, for any use of minor Minerals, the contractor has to submit the Mineral Despatch permit obtained from Mines and Geology Department. If Mineral Despatch Permit (MDP) is not submitted by the contractor along with the bill, the prevailing penalty and DMF contribution as per Karnataka Minor Mineral Concession Rules 1994 (as amended from time to time) will be deducted from the contractors bill at the time of payment.

The Tenderer shall also disclose if there are any bankruptcy proceedings against him.

Uploaded Drawings are tender purpose only.

Name, address,telephone,email id and fax numbers of the contractor is to be provided.

Each item of BOQ to be read as with all lead and lifts and as per the directions of Engineer in charge.

A copy of GST registration certificate to be uploaded.

Latest copy of the Income Tax Clearance Certificate and Sale Tax Clearance PAN and TAN Nos to be uploaded.

The defective liability period is one year.

If any of the dates mentioned above happens to be a general holiday, the next working day holds good.

Incomplete tender documents will be rejected.

Corrigendum will be published in web site for all modifications/corrections if any.

The intending bidder are advised to visit the site of work before submission of the tenders.

If any of the Contractor who have been black listed as per Government order are not eligible to participate in this tender.

As per the Karnataka building and other construction workers welfare cess act 1996 1 % of the bill amount will be deducted from the bill.

Further information can be had from the office of the Executive Engineer, Minor Irrigation & Ground Water Development Division, Bidar during the office Hours.

The contractor should establish quality control laboratory equiped with all the equipments and the materials should be periodically tested and properly documented as per the direction of the Engineer-in-charge of the work.

The Contractor is fully responsible for the Equipment / Material until the same is handed over to the EXECUTIVE ENGINEER in an operating condition after commissioning. The Contractor is responsible for the proper maintenance of equipment / material as well as protection of the same against theft, elements of nature, damages etc., while in his custody as well as after erection until the same is taken over by the EXECUTIVE ENGINEER under due acknowledgment in writing

The contractors whose tenders are rescinded due to delay in executing work/ delayed the work beyond tender period are not eligible for tendering for this work. And will not be considered though they may be lowest

The Work Done Certificates shall be issued by the Executive Engineer (if work done in Karnataka State), otherwise it shall be issued/counter signed by Superintending Engineer (if the work is done in other states)

The Contractor shall quote the rates without adding GST for either materials or works contract (Service). GST payable by the Contractor under this works contract will be paid to the contractor separately as per prevailing orders.

Technical Criteria

General

Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)

Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Past Experience

a) Executed in any one year, the following minimum quantities of work: 1)EWE (combined excavation and embankment): 4383.34 cum, 2) Pitching: 480.00 Sqm 3) Cement concrete: 285.11 Cum, 4) Steel: 4.21 Tonne.

Others -- DOCUMENT

Satisfactorily completed at least 90% of contract value as prime contractor, at least one similar work such as Construction/Improvement of ANIKUT/BANDHAR/PICKUP/BCB/BARRAGE value not less than Rs.22.17 Lakhs. The weightage of 10% will be given per year to bring them to the price level of 2025-26.

Work Done Certificate

The Tenderer shall have valid class - I KPWD License upload registration certificate of original should be produced while opening the tender.

PWD Registration Certificate (Class I/II/III/IV)

Capabilities of Vendor

Section 3, Qualification Information.

Others -- Section -3 of Bid Document

Financial Status

Liquid assets and / or availability of credit facilities of not less than Rs. 23.00 Lakhs (Credit lines/letter of credit / certificates from banks for meeting the fund requirement. It should be in prescribed format appended in Bid document.

Line of Credit

To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e. (2020-21, 2021-22, 2022-23,2023-24 & 2024-25) achieved in at least two financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs. 44.34 lakhs. The weightage of 10% will be given per year to bring them to the price level of 2025-26.

Audited CA Certificate of Annual Turnover

Others

All documents to be furnished are to be attested by the officer of not below the rank of Executive Engineer or by Notary.

Others -- Relevant Document

All documents including details of EMD are to be mentioned in the technical bid only ( as per KPPP options)

Others -- Relevant Document

The tenderer shall give details of works on hand (Present contract commitment)

Others -- Relevant Document

Work Locations

Fee & Financial Details

Tender Fee Amount

₹1,110

EMD Fee Amount

₹89,000

Important Dates

Last Activity

25 Feb 2026

Published

18 Feb 2026

Bid Opening

27 Feb 2026

Download Ends

20 Feb 2026

BOQ Preview

•

CONSTRUCTION OF MULTI-ARCH CHECK DAM ACROSS LOCAL NALA NEAR GUNALLI VILLAGE IN BIDAR TALUKA & DISTRICT

•

Cutting and removing jauliflora bushes upto 1.50 m girth excluding removal of stumps and including burning or disposing off the materials complete with all lead and all lifts as per direction of Engin...

•

Cutting and removing jauliflora bushes above 1.50 m upto 3.00 m girth excluding removal of stumps and including burning or disposing off the materials as directed complete with all lead and all lifts ...

•

Earth work excavation for Foundation by mechanical means in all kinds of soils upto 3 m depth for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shori...

•

Earth work excavation for foundation by mechanical means in in ordinary/ soft rock without blasting upto 1.5 m depth for all works & depth upto 3 m, as per drawing and technical specifications, inclu...

•

Providing and fixing 25 mm dia 2.75 m long ribbed steel anchor rods with one end split and driven fimly using steel wedge into 1.25 m deep 38 mm dia. hole drilled in bed rock and other end provided wi...

•

Construction of Embankment by excavating the available approved Gravel or Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreadi...

•

Providing and laying in Cement Concrete M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for all Basement & surface level works, return walls, retaining walls, sunken floors et...

•

Providing and laying in position cement concrete M25 design mix using 20 mm nominal size graded crushed coarse aggregates for all Super structures of building, Road works, Water works, Irrigation work...

•

Supplying, fitting and placing TMT FE550 or 550D steel reinforcement for dam & allied works including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, lap...

•

Providing rubble stone or boulder filling between or behind abutment below apron including cost of all materials, labour, hand packing, finishing top surface & all necessary works as directed and comp...

•

Providing and constructing 300 mm thick dry rubble stone pitching with pin headers at 2 per Sqm using stones and stone chips from approved source including cost of all materials, labour, hand packing ...

•

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

Bankers Cerifificate.pdf

Others - Banker Certificate • 1.73 MB

KW3 Conditions.xls

Instructions to Tenderers • 0.03 MB

general specifications admin.pdf

Others - general specifications admin • 0.20 MB

detailed specification.doc

Others - detailed specification • 0.61 MB

11038 tech bid.doc

Others - Technical Bid • 0.10 MB

11038 bid document kw3.doc

Tender Document • 1.71 MB

GO Exemption of machineries.pdf

Others - GO Exemption of machineries • 1.16 MB

forms and formats.xls

Others - forms and formats • 0.08 MB

Gunnalli Milestone.xlsx

Others - Gunnalli Milestone • 0.02 MB

Gunnalli Drawing.pdf

Others - Gunnalli Drawing • 0.42 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

SHIVARAJ SANGRAMAPPA

₹42.2 Laccepted-aoc