GE U(N) 69 2022 23 REPAIR AND REPLACEMENT OF INERNAL WIRING INCLUDING INTERNAL FITTINGS WIRING SWITCH SOCKETSiNF BN H COY FCOY SUB AREA EME BN INCLUDING REPAIR MAINT OF EXHAUST CEILING FANS AND WATER HEATING APPLIANCES AT AT BN KRIMCHI COMPLE

Amount

Taking down carefully the existing Copper/ Aluminium point wiring of any size and type by disconnecting from the either terminals complete with switches, sockets, ceiling rose, regulators, bell etc by unscrewing and removing materials to store for keeping in safe custody for re-use or for taking credit and making good to disturb surface of walls, floors etc., complete all as specified and directed by Engr -in- charge. Note : (i) Old dismanteled wiring and accessories (other than reuse) will be contractors property and credit will be charged against schedule of credit.

Taking down carefully by unscrewing from boards / outlet boxes fittings and fixture such as, LED bulk head fitting, LED tube light fitting etc. for re use at site or carrying to the store (serviceable fitting shall be reuse) all as specified and as directed by Engineer in charge.

Taking down Old Serviceable/unserviceable MCB DB any type/size etc after disconnecting (serviceable DBs /MCBs shall be reuse), complete all as specified and directed by Engineer in charge.

M&L for Point wiring for One light point controlled by one one way switch 5 Amp with 1.5 Sqmm single core multi standed copper conductor FRLS insulated and unsheathed heavy duty cable in colour code including contineous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLS insulated drawn into and including concealed PVC rigid conduit of not less than 20mm dia and1.5mm wall thickness ISI marked terminated into annealed steel terminal boxes including 3.00 mm thick hylam brand IS-2036 marked, laminated sheet cover for mounting switches, sockets, fan regulators etc complete all as specified and directed by the Engr-in-charge.

M&L for point wiring with 1.5 Sq. mm PVC Insulated unsheathed FRLS multistranded copper conductor, medium grade ISI meraked drwan into and including PVC concealed conduit with all accessories from terminal box to junction of ceiling and wall and rest of circuit conductor wire drwan in to and including suraface PVC rigid non metalic conduit for one ceiling fan point controlled by one switch with and also including 1.5 sqmm continious earth wire connected to common earth dolly complete all as specified and directed by Engineer in charge.

All as per item Srl No. 04 herein before but for bell / buzzer on independent board controlled by one push button bell switch.

All as per item Srl No.04 herein before but for 3 pin socket outlet 5 Amp on same board, complete all as specified and directed by Engr -in-charge.

All as per item Srl No. 04 herein beforebut for one 5 Amps socket outlet on independent board.

All as per item Srl No. 04 herein before but wire size 2x2.5 Sqmm to controlled the 3 pin 5 / 15 Amps socket outlet on independent board and providing earth continuity wire using PVC insulated, FRLS 1100 volts grade un sheathed single core stranded copper conductor cable of size 2.5 Sqmm.

All as per item Srl No. 04 herein before but controle by 2 Nos.of two way switch.

M&L Point wiring with multistranded copper conductor cable, PVC insulated and unsheathed (FRLS) size 1.5 sqmm drawn in and incl PVC casing and caping /PVC conduit with fixing accessories, to be fixed on wooden gutties or plastic rawal plug, for one light /fan/controlled by one switch with thickness not less than 1.25mm annealed steel boxes concealed on wall with and including 3mm thick laminated backlite sheet complete all as directed by Engineer-in-charge.

All as per item No 11 above but for two way point wiring

All as per item No 11 above but for one 3/5 pin socket 5 Amp on same board.with cable1.5 sqmm size.

All as per item No 11 above but for one 3/5 pin socket 5 Amp on independent board.with cable1.5 sqmm size.

All as per item No 11 above but for 3/5 pins socket outlet 15 Amps independent with 2.5 sqmm incl continous earthing with multistandred copper conductor PVC insulated unsheathed size 2.5 Sqmm complete all as specified and directed.

All as per item No. 11 above but for bell / buzzer on independent board controlled by one push button bell switch.

S&F Switch Piano flush type single pole 5 Amps One way, all as specified and directed by Engineer- in - Charge. Make : Anchor Penta Cherry of Ordering Code : 14121/ Havells REO Cat No: AHESXXW061

S&F Switch Piano flush type single pole two way 5/15 Amps, all as specified and directed by Engineer- in - Charge.Make : Anchor Penta Cherry of Ordering Code : 14122/Havells REO Cat No: AHESXXW062

S&F Socket outlet Two in one, 3/5 Pin piano type 5 Amp flush type complete all as specified and directed by Engineer- in - Charge. Make : Anchor Penta Ordering Code : 14119/Havells REO Cat No: AHEKSWW063

S&F Switch Piano type single pole 16/20 Amps One way, complete all as specified and directed by Engineer- in - Charge.Make : Anchor Penta Ordering Code : 39991/ Havells REO Cat No: AHESXXW201

S&F Socket outlet Two in one, 3/5 Pin piano type 10 Amp and 20 Amp flush type complete all as specified and directed by Engineer- in - Charge.Make : Anchor Penta Ordering Code : 39994/ Havells REO Cat No: AHESYXW161

S&F Ceiling rose, 3 terminal, PVC / polycarbonet, isolated body complete all as specified and directed by Engineer - in - Charge. Make: Anchor Ordering Code : 39072/ Havells REO Cat No: AHEEIXW000

S&F Electric bell (Ding dong) AC 230/250 volts grade single pole ISI marked, complete all as specified and as directed by Engineer in charge Make : Havells REO Ordering code : AHELEXW000/ ANCHOR

S&F switch piano flush type for bell Push 5 Amps, complete all as specified and directed by Engineer- in - Charge.Make : ANCHOR Penta Cherry,Ordering Code : 14123/ Havells REO Ordering code : AHEMBKW061

S&F Electronic type fan regulator Stepped type, 240Volt flush type suitable for 1200/1400mm sweep ceiling fan, ISI marked complete all as specified and directed by Engineer- in - Charge. Make : ANCHOR Penta Cherry,Ordering Code : 14123/ Havells REO Ordering code : AHEMBKW061

Taking down fan, ceiling cable end, dismantling blades and kept in safe custody for refixing on same location all as specified and directed by Engineer in charge.

Hanging /fixing only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan obtained from item No 26

Sub main wiring with two run single core 4 sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100V grade including 25mm dia PVC concealed conduit/PVC casing & caping medium grade ISI marked with all accessories such as Tees, elbows, junctgion boxes etc, as required fixed on wall alongwith one run of 4 sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continious earth wire and connecting to existing main switch board/distribution board complete including taking down unserviceable submain of any type/size and testing on completion etc fixed in replacement, complete all as specified and directed by Engineer-in-charge. Note : Two run of 4 sqmm and one run 4 sqmm cable and one run of PVC conduit shall be measured as one RM

Sub main wiring with two run single core 6 sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100V grade including 25mm dia PVC concealed conduit/PVC casing & caping medium grade ISI marked with all accessories such as Tees, elbows, junctgion boxes etc, as required fixed on wall alongwith one run of 6 sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continious earth wire and connecting to existing main switch board/distribution board complete including taking down unserviceable submain of any type/size and testing on completion etc fixed in replacement, complete all as specified and directed by Engineer-in-charge. Note : Two run of 6 sqmm and one run 6 sqmm cable and one run of PVC conduit shall be measured as one RM

Sub main wiring with two run single core 1.5 sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100V grade including 25mm dia in PVC concealed conduit/PVC casing & caping medium grade ISI marked with all accessories such as Tees, elbows, junctgion boxes etc, as required fixed on wall alongwith one run of 6 sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continious earth wire and connecting to existing main switch board/distribution board complete including taking down unserviceable submain of any type/size and testing on completion etc fixed in replacement, complete all as specified and directed by Engineer-in-charge. Note : Two run of 1.5 sqmm and one run1.5 sqmm cable and one run of PVC conduit shall be measured as one RM

Sub main wiring with two run single core 2.5 sqmm FRLS copper conductor cable PVC insulated, 1100V grade including 25mm dia in PVC casing & caping medium grade ISI marked with all accessories such as Tees, elbows, junctgion boxes etc, as required fixed on wall alongwith one run of 2.5 sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continious earth wire and connecting to existing main switch board/distribution board complete including taking down unserviceable submain of any type/size and testing on completion etc fixed in replacement, complete all as specified and directed by Engineer-in-charge. Note : Two run of 2.5 sqmm and one run2.5 sqmm cable and one run of PVC casing and capiing shall be measured as one RM

Fixing only serviceable MCB DB of any type and capacity obtained from Item No 03 complete all as specified and directed by Engineer incharge.

S&F in replacement single pole and neutral sheet steel powder coated distribution board for MCBs fitted with bus bar neutral link Earth bar and din rail suitable for use on 240V, 50Hz supply double door SPN DB system 4 Way all as specified and directed by Engineer in charge. Make : C&S Cat No:CSDBSPNDD08/ Standard Cat No: DSDNSHODXW08/ Indo Asian Cat No : 810321

S&F in replacement single pole and neutral sheet steel powder coated distribution board for MCBs fitted with bus bar neutral link Earth bar and din rail suitable for use on 240V, 50Hz supply double door SPN DB system 8 Way all as specified and directed by Engineer in charge. Make : C&S Cat No:CSDBSPNDD08/ Standard Cat No: DSDNSHODXW08/ Indo Asian Cat No : 810321

S&F in replacement single pole and neutral sheet steel powder coated distribution board for MCBs fitted with bus bar neutral link Earth bar and din rail suitable for use on 240V, 50Hz supply double door SPN DB system 12 Way all as specified and directed by Engineer in charge. Make : C&S Cat No:CSDBSPNDD12/ Standard Cat No: DSDNSHODXW12/ Indo Asian Cat No : 810323

Supply and fix VTPN MCCB Double door Distribution Board 04 way 415 volts grade IP 43 Protection Grade with provision for (MCCB) as incomming and Three/single phase (TP/SP) outgoings, complete with insulated bus bar arrangement fixed flush to wall complete including connections should be provide with necessary reducer lugs all as specified and directed by Engr-in-charge. Make : C&S Cat No:CSDBMCCB100DD04IP43S/ Standard Cat No: DSDLVDRBAOFO04/ Indo Asian Cat No : 811888

S & F in repair Thermal magnetic MCCB 4 pole 63 Amps 415 Volts 16 ka INCLUDING MAKING NECESSARY ARRANGEMENT all as specified and directed by Engineer in charge for MCCB DB.Make C&S Cat No: CSC2N4/ IndoAsian Cat No: 830022/ or equivalent makes to Standard

S & F in repair Thermal magnetic MCCB 4 pole 100 Amps 415 Volts 16 ka INCLUDING MAKING NECESSARY ARRANGEMENT all as specified and directed by Engineer in charge for MCCB DB.Make C&S Cat No: CSC2N4/ Indo Asian Cat No: 830022/ or equivalent makes to Standard

S & F in repair Thermal magnetic MCCB 4 pole 125/160 Amps 415 Volts 16ka INCLUDING MAKING NECESSARY ARRANGEMENT all as specified and directed by Engineer in charge for MCCB DB.Make C&S Cat No: CS3A4/ IndoAsian Cat No: 830095 / or equivalent makes to Standard

S&F in repair connection and testing 'C' series SPN MCB 40 to 63 Amp 240V, 50Hz, 10kA for lighting and other domesitc loads incl necessary copper lugs etc all as specified and as directed by Engineer incharge. Make C&S Cat No: CSMBS2C40/ IndoAsian Cat No: 810078/ or equivalent makes to Standard

S&F in repair 'C' series MCB SP6-32 Amps. Make C&S Cat No: CSMBS1C6 to CSMBS1C32/ IndoAsian Cat No: 810078/ or equivalent makes to Standard

S&F in repair 'C' series MCB SP 40 Amps. Make C&S Cat No: CSMBS1C40/ IndoAsian Cat No: 810060/ or equivalent makes to Standard

Fixing only serviceable MCB SPN/SP any capacity obtained from item no 03 as above all as specified and as directed by Engineer in charge.

Fixing only LED tube light fittings of 5w/12W/20W/2'x2' panel light anf LED bulk head fitting 9W as obtained from Srl item No-02 above complete with all afixing accessories.

S&F in repair LED light fitting with high out put diffuser 1 feet, 5 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engineer in charge. MAke-C&G Cat Pt- NO-CCS-103-05-65-SLDP-NWH,Havells,Wipro

S&F in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 /12 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engineer in charge.MAke-C&G Cat Pt- NO-CCS-103-10-65-SLDP-NWH,Havells,Wipro

S&F in repair LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed by Engineer in charge.MAke-C&G Cat Pt- NO-CCS-103-20-65-SLDP-NWH,Havells,Wipro

S&F in repair LED Bulk head (6500K) fitting of 09/10 Watt surface mounting type extruded aluminium body with diffuser complete with testing all as specified and directed by Engineer in charge.

S&F in repair surface/recessed mounting LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed by Engineer in charge. .Make -Crompton & Greaves,Model-Vector-VIIR,Cat Pt NoLCTLRF7-36-CDL,Havell & WIPRO

S&F in repair surface/recessed mounting LED warm light fitting POLARIS PAN NIO-III,PANEL 2'x2' PLR 36 FO-ww ,35/36 watt LED environmental friendly , new generation , aesthetically designed ,ultra modern recess mounting luminaire with high brightness SMD LEDs as light source suitable for armstrong /grid /ceiling all as spesified and directed by Engr-in-charge Engr-in-Charge. Make - Havells /CG/ Wipro

S&F in repair surface/recessed mounting LED down lighter round/square shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as spesified and directed by Engr-in-charge Engr-in-Charge.Make -Crompton & Greaves,Model Pearl -R or Proxima-S CAt Pt No-CDR-208-12-30SL-NWH,Havell & wIPRO

S&F in repair surface/recessed mounting LED down lighter round/square shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as spesified and directed by Engr-in-charge Engr-in-Charge.Make -Crompton & Greaves,Model Pearl -R or Proxima-S CAt Pt No-CDR-208-15-30SL-NWH,Havell & WIPRO

S&F in repair LED Garnet 18Watt PLL Lamp 4 pin type, 6500 K as per sample fixed in repair complete all as specified and as directed by Engineer in charge.

S&F in repair for MCB TPN 63 Amp, 415 Volts- C curve of 10kA Make : C&S Cat No: CSMBS3C63N/ IndoAsian Cat No 810098/ Havells

S&F in repair Metal clad Plug socket single pole enclosure with two pin earth plug and socket with one single 20 Amp , 240 volts MCB complete all as specified and directed by Engineer in charge.

S&F in repairr Switch Piano flush type single pole two way 5 Amps fixed in replacement, complete all as specified and directed by Engineer- in - Charge. Make : Anchor Penta Cherry of Ordering Code : 14122/Havells REO Cat No: AHESXXW062

S&F in repair Switch Piano flush type single pole 5 Amps one way fixed in replacement, complete all as specified and directed by Engineer- in - Charge.Make : Anchor Penta Cherry of Ordering Code : 14121/ Havells REO Cat No: AHESXXW061

S&F in repair switch piano flush type for bell Push 5 Amps fixed in replacement, complete all as specified and directed by Engineer- in - Charge. Make : ANCHOR Penta Cherry,Ordering Code : 14123/ Havells REO Ordering code : AHEMBKW061

S&F in repair Socket outlet Two in one, 3/5 Pin piano type 5 Amp flush type fixed in replacement, complete all as specified and directed by Engineer- in - Charge. Make : Anchor Penta Ordering Code : 14119/Havells REO Cat No: AHEKSWW063

S&F in repair Socket outlet Two in one, 3/5 Pin piano type 5 Amp and 15 Amp flush type fixed in replacement, complete all as specified and directed by Engineer- in - Charge. Make : Anchor Penta Ordering Code : 39994/ Havells REO Cat No: AHEKYXW163.

S&F in repair Switch Piano type single pole 16/20 Amps One way, fixed in replacement, complete all as specified and directed by Engineer- in - Charge.Make : Anchor Penta Ordering Code : 39991/ Havells REO Cat No: AHESXXW201

S&F in repair Switch socket combination piano type 5 pin 5 Amps flush type fixed in replacement, complete all as specified and directed by Engineer- in - Charge.Make : Anchor Penta Ordering Code : 38820/ Havells REO Cat No: AHETOXW062

S&F in repair Switch socket combination piano type 6 pin 16 Amps flush type fixed in replacement, complete all as specified and directed by Engineer- in - Charge. Make : Anchor Penta Ordering Code : 39998/ Havells REO Cat No: AHETOXW204

S&F in repair Switch socket combination box type 5 pin 5 Amps flush type fixed in replacement, complete all as specified and directed by Engineer- in - Charge. Make : Anchor Penta Ordering Code : 39998/ Havells REO Cat No: AHETOXW204

S&F in repair Switch socket combination box type 6 pin 16 Amps flush type fixed in replacement, complete all as specified and directed by Engineer- in - Charge. Make : Anchor Penta Ordering Code : 39998/ Havells REO Cat No: AHETOXW204

S&F in repair Ceiling rose, 3 terminal, PVC / polycarbonet, isolated body fixed in replacement, complete all as specified and directed by Engineer - in - Charge. Make: Anchor Ordering Code : 39072/ Havells REO Cat No: AHEEIXW000

S&F in repair Electronic type fan regulator Stepped type, 240Volt flush type suitable for 1200/1400mm sweep ceiling fan, ISI marked fixed in replacement, complete all as specified and directed by Engineer- in - Charge. Make : ANCHOR Penta Cherry,Ordering Code : 14123/ Havells REO Ordering code : AHEMBKW061

S&F in repair Electric bell(Ding dong) AC 230/250 volts grade single pole ISI marked fixed in replacement, complete all as specified and as directed by Engineer in charge. Make : Havells REO Ordering code : AHELEXW000/ ANCHOR

S&F in repair Modular fan step regulator 120W 02 module including taking down unserviceble one all as specified and as directed by Engineer in charge. Make : Legrand or equivalent to Schnider/Havells

S&F in repair Modular switch 01 way 06A, 01 module including taking down unserviceble one all as specified and as directed by Engineer in charge. Make : Legrand or equivalent to Schnider/Havells

S&F in repair Modular switch 01 way 16A, 01 module including taking down unserviceble one all as specified and as directed by Engineer in charge. Make : Legrand or equivalent to Schnider/Havells

S&F in repair Modular bell push flush type 6A, 01 module including taking down unserviceble one all as specified and as directed by Engineer in charge. Make : Legrand or equivalent to Schnider/Havells

S&F in repair Modular socket, 6A-2/3 pin, 02 module including taking down unserviceble one all as specified and as directed by Engineer in charge. Make : Legrand or equivalent to Schnider/Havells

S&F in repair Modular socket, 6A/16A-2/3 pin, 02 module including taking down unserviceble one all as specified and as directed by Engineer in charge. Make : Legrand or equivalent to Schnider/Havells

S&F in repair PVC rectangular block for mounting switches, sockets, fan regulator etc. of size 200x150x50mm deep including making necessary cutting all as specified and as directed by Engineer in charge, Make Anchor or equivllent to havells

S&F in repair PVC rectangular block for mounting switches, sockets, fan regulator etc. of size 250x200x50mm deep including making necessary cutting all as specified and as directed by Engineer in charge, Make Anchor or equivllent to havells

S&Fin repair 3 mm thick plastic laminated ebonite sheet cover of size 200x150mm including cutting /finishing or making hole for mounting of switches, sockets, regulators etc all as specified and as directed by Engineer in charge.

S&F in repair 3 mm thick plastic laminated ebonite sheet cover of size 250x200mm including cutting /finishing or making hole for mounting of switches, sockets, regulators etc all as specified and as directed by Engineer in charge.

M&L for disconnecting all Electrical connection from MCB DB TPN/Wall Mounted Panel Box for reconnecting the same with providing proper Copper Bottle Lugs of suitable size and removing the burnt out internal wiring of DB/Panel complete with providing PVC Flexible conduit for Hanging wire complete all as specified and directed by Engineer in charge. Note : Replacement Burnt out MCBs of any type/size may be measured and paidseparately under relavent Items

Taking down/removing existing damaged cable connection from MCB DB/Wall Mounted Panel Board by making cutting chases on wall/ floor to extend the shorten UG cable of any type/size from Loop and making fresh to reconnect the same with suitable aluminium lugs complete including distribute the load equally on each phase all as specified and directed by Engineer in charge. Note : Cutting of Wall /Floor shall be measured and paid separately.

M&L for Cutting of hard standing n.exc 45 Cm defth, and n.exc 30 Cm width for taking out/laying UG Cable including making good disturbed surface as per existing all as directed .

M&L Earthing complete with galvanised steel earth plate electrode 60x60cmx6mm thick, buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No-3 of MES Part-1 fixed in replacement including testing on completion including the material and labour of the following :- (a) Excavation and earth work for drilling hole for electrode in any type of soil. (b) PCC Pit in cement concrete 1:2:4 type B-1. (c) Precast RCC cover with suitable handle 40mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than 1.87 Kg/Sqm. (d) Funnel with watering pipe of GI protection pipe 5 mtr long for protection of earthing lead from mechanical injury or tempering. (f) Requisite quantity of common salt and charcoal. (g) Testing of Earthing. Note : (a) On testing after completion of earthing, if the desired earth resistnace is not obtained, the earthing will be done by the contractor at his own risk and cost to the entire satisfaction ot the Engineer incharge. (b) The contractor shall quote his rate considering taking down cost of existing unserviceable earthing.

Suplly and fix in repair energy saving LED garden light fitting,decorative,bollard type of capacity 9/11 watt with opaldiffuser &aluminium reflector complete with all accessaries and fixing arrengement on PCC block of size 45mm X 45 mm alogwith fixing nuts,bolts and PVC insulated aluminiumconductor,stranded type of size 4.0 sqmm,2 -core including taking down old/unserviceble garden light fittings any type and wattage all as directed. Make - C&S cat pt No- LTGLCW9WLED,Havells cat pt No- LHEVBDP7IN6K008,Crompton & Greaves-LPTO-40-CDL-M

Supply and fixing LED street light fitting 25/35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as directed.

Supply& fix in repair driver/ choke suitable for LED panel light fitting 2'x2' 36 watts, 240 volts AC 50 Hz electronic type . Make - Crompton & Greaves/Philips/ Havells/Bajaj/ C&S/C&G

Supply & fix in repair LED street/buiding ligh fitting driver/ chokesuitable for 25/35 watts, 240 volts AC 50 Hz electronic type. Make - Crompton & Greaves/Philips/ Havells/Bajaj/ C&S/C&G

Supply and fix in repair decorative LED gate light fitting of 30/40 watt,240 volts,diecast aluminium housing in pure polyster powder coated grey finish,top maintainable product with opening die cast cover,anti corrossive stainless steel screws & silicon gasket,HET PMMA diffuser,IP65 protection driver duly prewired up to terminal on firms to IS 10322 part 5/sec, 1 :1987,suitable for pole of dia 65-75 mm in-built electronic driver complete including taking down old/unserviceble gate light fitting complete all as specified and directed .Make - Crompton & Greaves Cat part No -LPT0-40-CDL or equivalent in Bajaj/Havells/C&S/ Philips/Wipro

S&F in repair service cable un armoured of size 4 sqmm 2 core,1100 volts grade,heavy duty cable with PVC insulated stranded aluminium conductor served with an inner sheathing of PVC tape and overall PVC sheathed including taking down old/ unserviceble service wire complete all as specified and directed.Make-KEI/Havells/Kalinga

S&F in repair service cable un armoured of size 6 sqmm 2 core,1100 volts grade,heavy duty cable with PVC insulated stranded aluminium conductor served with an inner sheathing of PVC tape and overall PVC sheathed including taking down old/ unserviceble service wire complete all as specified and directed.Make-KEI/Havells/Kalinga

S&F in repair service cable un armoured of size 10 sqmm 2 core,1100 volts grade,heavy duty cable with PVC insulated stranded aluminium conductor served with an inner sheathing of PVC tape and overall PVC sheathed including taking down old/ unserviceble service wire complete all as specified and directed.Make-KEI/Havells/Kalinga

S&F in repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC multi angular slim width it makes seamlessly blendin withthe ceiling spacewith geomsatricand aligned designes ,it can be arrenge in symmetric and abstract way to make the xceiling a pieceof art recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed by Engineer in charge. Make- Crompton & Greaves ,Model- Vector-I or Vector-IV Cat pt No-LCTLRF1-36-CDL/WW ,Havells or Wipro

S&F in reair/Replacement of capacitor 23.5/3.15 mfd suitable for operate ceiling fan 1200/1400 mm sweep complete all as specified and directed

Taking down carefully ceiling fan of any size by disconnecting the wire and dismantaling blades and transporting the same to contractors work shop for rewinding/painting of the same or depositing to E/M store yard if found beyond repair all as specified and directed by Engineer -in -charge. Note: - Parts /components will be measured and paid separately under their respective items.

All as per Srl Item No 93 above here in before but for Exhuast/ wall mounted fan of any size/Make complete all as specified and as directed by Engineer in charge.

M & L for servising/oiling, greasing and overhauling of ceiling fans of any size/type at site by using appropriate grade of oil/ Grease and replacing deffective parts such as bush, bearing, split pin, rubber bush, hanging clamp, cpacitor including cleaning dust and removing old grease from fan motor bearing and applying new grease including reassembling for fixing the same complete all as specified and directed. Note: (i) Parts /components will be measured and paid separately under their respective items. (ii) Electrician with helper along with T&P and Ladder will be provided by the contractor. (iii) Unserviceable item shall be the property of contractor as schedule of credit

All as per item No 95 above but for exhaust fan 150 to 450 mm sweep.

M&L Rewinding of motor of AC ceiling fan, of any make/type and size (1200 mm sweep) with super enamelled copper wire of appropriate gauge as existing to obtain the specified and satisfactory RPM as per menufactures specification, including replacement of all insulation materials, varnishing, heating, drying and also including lubricating, reassembling of stater/rotor, connection & testing complete.

M&L Rewinding of motor of AC ceiling fan, of any make/type and size (1400 mm sweep) with super enamelled copper wire of appropriate gauge as existing to obtain the specified and satisfactory RPM as per menufactures specification, including replacement of all insulation materials, varnishing, heating, drying, also including lubricating,reassembling of stater/rotor, connection & testing complete.

Description all as per item No 98 here-in-before but for exhaust fans of size 150 to 300 mm sweep

Description all as per item No 98 here-in-before but for exhaust fan of size from 380 MM to 450MM sweep

Description all as per item No 98 here-in-before but for wall mounted of 400 mm sweep

M & L for replacement of defective ball bearing for ceiling/table/pedestal/Air-circulators fan of any size (Bearing make/size SKF-6201/6202/ or equivalent make of NBC)

Description all as per item No 102 above but for exhaust fan any of size/make- SKF 6203/6204 or equivalent make of NBC)

M & L for replacement of defective capacitor of size 2.5 mfd for any type of fans suitable for 250 V including making connection complete all as specified and directed.Make :- (USHA/Havells/Tibcon)

Description all as per item No 105 above but for 0.75/1.7 mfd suitable for PVC /steel exaust fan

Description all as per item No 105 above but for 3.15 mfd

Description all as per item No 105 above but for 4.0/5.0 Mfd.

M & L for replacement of rubber real of suitable size for ceiling fan complete all as specified and directed

M & L for replacement of gun metal bush suitable for any type/model/size of fans complete all as directed. Make: As per sample/ Existing.

S&F in repair PVC insulated twin twisted copper conductor cable 1100 V grade of size 24/.20 (0.75 Sqmm) all as specified and as directed by Engineer incharge.

S&F in replacement stepped type electronic fan regulator 60/100 watt flush type on the existing phenolic laminated sheet etc as required all as specified and directed by Engr-in- charge .

Supply and fixing in repair modular electronic fan regulator, step type, 120 watt 230 volt and making all necessary connections complete all as specified and directed.

M & L for painting of ceiling fans any make and size at site with one coat of superior quality synthetic enameled paint of approved make by spraying, filling cavities with filler after preparation of surface all as specified & directed.

Description all as per item No 113 above but exhaust fan of any size 225mm to 380mm sweep with smoke white or grey synathetic enamelled paintof superrior quality all as specified & directed.

Description all as per item No 113 here-in-before but for exhaust fan of size 450 mm sweep ll as specified & directed.

Description all as per item No 113 but of wall mounted fan of up to 400mm size complete with stand all as specified and diretced

M & L in replacement of MS nut & bolts anealed with two Nos of washer 8/10 mm dia and 40/65 mm long duly half threded and hole for split pin complete all as specified and directed

M & L in replacement of PVC canopy suitable for 1200 mm to 1400 mm sweep ceiling fan complete all as specified and directed

M & L in replacement PVC connector 4 way 6 Amps with connection screws, nuts complete all as specified and directed .

M & L in replacement PVC clamps with fixing screws for holding capacitor of any type and size complete all as specified and directed .

Supply and fixing 'S' type hook made of 12 mm dia MS round bar/MS flat strip 40x4 mm of appropriate size after taking out old rusted wornout hook complete all as specified and directed .

S&F clamp for down rod of suitable size including gromet/reel type rubber pad with bolts, nuts and washers and split pin suitable for housing ceiling fan.

Taking out old, broken and rusted louver shutter of any size exhaust fan from wall for necessary replacement complete all as specified and directed

Supply and fixing of louver shutter made of GI sheet metal / pressed steel sheet 1.2 mm thick for round base and 0.8 mm thick for flaps, comprising of mounting legs frames made of GI /pressed steel flat strips of size 25mm x 3mm includidng heavy duty rust proof passivated bolts of size 50 mm long 8 mm dia to be fixed on wall fater driling, and duly painted by two coat of synthatic enamelled paint (spray painting) over a coat of primer for exhust fan up to 300 mm sweep

All as per item No. 124 above but for exhaust fan 380 / 450 mm sweep.

Supply and fixing in replacement of ceiling fan blade set 1200 mm/1400mm sweep for ceiling fan of any make and model aero dyanamically balanced including screws for fixing with fan complete all as specified and directed. MAKE: BAJAJ/USHA/CG/SKN.

Supply and fixing in replacement MS down rod heavy duty 15mm nominal dia 18"long duly painted in matching colour complete all as specified.

Supply and fixing in replacement MS down rod heavy duty 15mm nominal dia 24"long duly painted in matching colour complete all as specified.

Supply and fixing in replacement MS down rod heavy duty 15mm nominal dia 36"long duly painted in matching colour complete all as specified.

Supply and fixing in replacement of rigid aluminium fan blade for exhaust of capacity 300/380/450mm including locking nut complete all as specified.As per sample/ existing.

Supply and fixing 'S' type fan hook suitable for hanging of ceiling fan any type including rubber reel,nuts,bolts,washers and safety pin after taking out old rusted wornout hook complete all as specified and directed .

Disconnection of electric and water connection and taking down carefully storage type electric water heaters ( Geysers ) of capacity 25/35/50 Ltrs ( any Make/Modal ) from its existing position and Inspection of Geysers for its seriviceabilty/ un servicieability.

M&L for opening, dismantling, brushing and cleaning of storage water tank of any capacity and size , removing all the sludge , scaling and bleaching from the tank and examining of any leakage of water and tightening of nuts, bolts including reassembling and refixing its own location complete including following (a) Check and connect earth continuity to electric water heater. (b) Cheking and adjusting of pressure realease valve (c) Check and Maitenance, setting of thermostate valve. (d) Visual examination of fusible plug. Note: (i) Spare parts/components of Geysers, shall be measured and paid separately. (ii) Transport cost for carry out Geysers from site of work to workshop & vice versa shall be deemed to be included in unit rate. (iii) Electrician with helper along with T&P and Ladder will be provided by the contractor for repairing & servicing for day to day complaints in PB Enlcve, Ashok Vihar, Old Medical Complex, CHNC and complete OTM Accn under this AOR.

Supply and fixing in replacement heating element of any size and any shape of capacity 1500 watt for electric water heater any make and any modal and making all Electrical connection as per site requirement all as specified and directed. Make:Theata/ venus.

All as per above Item Sl No-134 for electric water heater of capacity 2000 watts.

Supply and fixing in replacement thermostat 240 Volts AC temperature adjustable suitable for 25 to 50 Ltr electric water heater and making electrical connection all as specified and directed.

Supply and fixing in replacement indicator lamp assy red and green in colour any shape and size suitable for 25 to50 ltr electric water heater all as specified and directed.

Supply and fixing in replacement PVC connection Pipe for Hot and cold connection suitable for working temp of not less than 90 degree Centigrage complete with check nut and washer in both side, Size 450mm long and making connection to out let and inlet of electric water heater of 25 to 50 Ltr capacity all as specified and directed. Make : Valentino

Supply and fixing in replacement PVC connection Pipe for Hot and cold connection suitable for working temp of not less than 90 degree Centigrage complete with check nut and washer in both side, Size 600mm long and making connection to out let and inlet of electric water heater of 25 to 50 Ltr capacity all as specified and directed. Make : Valentino

Supply and fixing in replacement inner shell ( inner tank) made out of stainless steel sheet 20 guage suitable for 25 /35 Ltr electric water heater in existing shape and size complete all as specified and directed.

All as per above Item Sl No-140 do but 50 Ltr Electric water heater.

Supply and fixing in replacement unsv outer body complete with Top and bottom cover, inspection plate of 25/35 Ltr electric water heater duly painted with super enamelled paint two coat over a red oxide steel primer complete all as specified and directed.

All as per above Sl No-142 do but 50 Ltr electric water heater.

Taking down existing glass wool and supply and fix new superior quality glass wool in geysers any capacity i.e 25/50 Ltr electric water heater all as specified and directed.

Supply and fixing in replacement inner base assy Chromium plated brass complete any shape and size with inlet, out let , thermostate slot, drain plug and clamp or bolts for fixing heating element as existing shape and size complete suitable for 25 Ltr electric water heater.

All as per above item Sl No-145 do but 50 Ltr electric water heater.

Taking down existing unsv copper flexible cable and supply and fix new 3 core copper flexible PVC insulated multistranded cable of size 4 Sqmm including making electrical connection to electric water heater and plug top MAKE: PLAZA/ INDO ASIAN/HAVELLS

Supply and fixing in replacement 15 Amp plug top 3 pin including making electrical connection with existing cable complete MAKE: ANCHOR/ SSK/CRABTREE

Supply and fixing in replacement metal clad top 2 pole and earth 20 Amp including making connection MAKE: HAVELLS/LEGRAND/L&T

Supply and fixing in replacement fusible plug(PRV) in 25/35/50 Ltr capacity electric water heater in existing location complete and testing.

Supply and fixing in replacement base assy gasket in 25/35/50 ltr capacity electric water heater in any shape and size all as specified and directed.

Taking down of electric water heater of 25/ 35 Ltr capacity of any make from the existing location by own arrangement of the contractor and cleaning entire body with wire brush and removing old paint and making surface smooth for repainting with super enamelled paint over a one coat of red oxide steel primer as per existing colour code and removing unwanted paint from glass and rubber items and refixing its own location complete.

All as per above item Sl No-152 do but 50 Ltr electric water heater.

M & L for replacement of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps "C" Curve 10kA, 240 volt capacity complete all as directed.

Supply and fix in replacement safety valve suitable for 25 Ltrs/50Ltrs capacity Gysers all as specified and directed. Make : Havells/Legrand/GEC.

S&F bib tap cast copper alloy chromium plated with crutch handle screwed down,screwed for Iron pipe or brass ferrule 15 mm bore fixed in repair complete.

Supply and fix in replacement Stop valves 15mm dia, cast copper alloy fency type choromium plated screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed all as specified.

Supply and fix in replacement fastner bolt as per site requirmement where is required all as per specified and as directed by Engr-in- charge.

Supply and fix in replacement non return valve 15mm dia pipe brass made ISI marked ,complete all as specified and directed by Engr-in- charge.

Taking up or down steel tubing 15mm/20mm bore with fitting and for cleaning including refixing /remove from the site all as specified and directed.

Supply and fixing, cutting and threading complete to walls and ceilings or laid in floors and as per site requirment 15mm bore GI tubing medium grade screwed and socket joint complete with all fittings such as bend socket , tees elbow union berral nipple plug etc on walls and ceiling with necessary GI clamps etc. NOTE- The tenderer in his required tender shell include cost of scaffolding for fixing GI tubing in highrise bldg & multistoried bldg.

Supply and fixing GI nipple double threaded including socket minimum 1" long complete all as specified and directed by Engineer in charge.

m/s shanti trading company

DEV RAJ MAGOTRA

RANBIR ENTERPRISES