Installation of open air gym at Shahid Bhagat Singh Stadium.

Amount

SKY WALKER • DIMENSIONS: - 1720mm (Length) x 630mm (Width) x 1750mm.(Height) • SAFE AREA: - 2.7Mtr x 1.6Mtr. • SkyWalker Equipment made from "B" class G.I. Pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters • The main frame pipe is of 80mm NB made from "B" Class G.I. Material which is bend at the radius of 250mm. • The leg movement frame is of 50 x 50mm x 3mm thick CRC square pipe. • Sleeves are made up of 50 mm OD M.S. pipe with thickness 2mm. This results in easy replacement of bearings, pins and handle. • The handle frame is of 25mm NB made from "B" Class G.I. pipe. • The foundation used for fixing is a structure and made from center pipe of G.I. of 65 NB "C" class. Welded with M.S. round plate of 0250mm & 8mm thick. . The footrests made MS chequer palte. • Closing Caps are made up of high quality Fiber reinforced Plastic material. • The pins used are made up of 0 25mm SAE8620 bright material. • The bearings used are "6205zz" are permanent lubricated sealed bearing of reputed brand. • High tensile steel with galvanized nuts & bolts are used for assembly. • The powder coating is done with Pure Polyester powder with 60 to 70 micron thickness.

LEG PRESS • DIMENSIONS: - 1840mm (Length) x 360mm (Width) x 1560mm. (Height). • SAFE AREA:- 2.8 x 1.4Mtr. • Leg Press equipment made from "B" Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters • The center pipe is of 100mm NB made from "B" Class G.I. pipe. • The bottom support of M.S. round plate of 0250 mm & 8mm thick. • The remaining outer frame is of 32NB made from "B" class G.I. pipe. • The foundation used for fixing is structure and made from center pipe of G.I. of 65mm NB "C" class welded with M.S. round plate of 0250mm & 8mm thick. • Seat & Back rest provided are made up of MS deep draw quantity of 2mm thickness with no joint with uniform outer edge radius. • The footrests are made from MS chequer . • The frame of footrests made up of 25 NB "B" class G.I. pipe. • Closing Caps are made up of high quality LLDP Plastic material. • To build structure bushes are used which are made from M . S . seamless pipe of 50mm O.D. and 5mm thickness. • The pins used are made up of 025 mm SAE 8620 bright material. • The bearings used are of "6205zz" permanent lubricated sealed bearing of reputed Brand. • High tensile steel with galvanized nut bolts are used for assembly. • The powder coating done with Pure Polyester powder with 60 to 70 micron thickness.

ROWER • DIMENSIONS: - 1200mm (Length) x 1000mm (Width) x 920mm. (Height) • SAFE AREA: - 1.5Mtr. x 1.5Mtr. • Rower Equipment made from "B" Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters • The Main frame is of 2"X4" SQUARE PIPE OF MS . • The handle frame 2 5 N B is made from "B" class G.I. pipe. • To join the movement frame to main frame connecting links made up from 32 NB G.1. "B" class pipe. • The seat fitted on the outer frames are made up of M.S. Sheet of size 330 mm X 300mmX2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges. • Pins used of Diameter 17mm are made up from SAE 8620 bright material. • The bearings used are of "6203zz" permanent lubricated sealed bearing of reputed brand. • High tensile steel with galvanized nuts and bolts are used for assembly. • The P.U. bushes (Stopper) used to avoid the collision. • The powder coating done with Polyester powders with 60 to 70 micron thickness.

SIT UP BOARD DOUBLE • PRODUCT DIMENSIONS: - 1760mm (Length) x 1140mm (Width) x 660mm (Height). • SAFE WORKOUT AREA: - 2500mm (Length) x 1600mm (Width). • The Sit up Board double made from "B" Class GI pipe. • The main frame is of 25mm NB made from "B"Class GI pipe. ms pipe of 2"x1" or cheqer plate should be used on structure. • The remaining frame of the sit up board is of 65mm NB made from "B" class MS pipe. • The powder coating is done with Pure Polyester powder with 60 to 70 micron thickness. • The foundation used for fixing is a structure and made from center pipe of MS 65MM NB "C" class Welded with M.S. round plate of 0250 mm & 8mm thick.

SEATING & STANDING TWISTER • DIMENSIONS: - 1700mm (Length) x 540mm (Width) x 1250mm. (Height). • SAFE AREA: - 3 Mtr x 1Mtr. • Seating &Standing Twister equipment made from "B" Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters • The Center Pipe is of 100mm NB made from "B" Class G.I. Round Pipe. • The M.S. round plate of 0250 mm & 8mm thickness is welded at bottom. • Handle and Bottom sleeve pipe of 25mm OD with thickness 5mm provided for easy assembly, replacement and maintenance. • The bottom frame of the Seating & Standing twister is of 32 NB, 80 NB, and 25 NB made from "B" class G.I. pipe. • The handle frame of Seating & Standing twister is 25 NB & Foot resting frame of seating side is made from "B" class G.I. pipe of 25mm NB. • The foundation used for fixing is a structure and made from center pipe of MS. of 65 NB "B" class, Welded with M.S. round plate of 0250 mm& 8mm thick. • The Twister plate fitted on the bottom frame is made up of M.S. Round Plate of size 170mm diameter and 5mm thickness. • Closing Caps are made up of high qualityLLDP Plastic material. • The Pins used are made up of 0 35 mm SAE 8620 bright material. • The bearings used are of "6205zz" permanent lubricated sealed bearing of reputed brand. • High tensile steel with galvanized nuts & bolts are used for assembly. • The powder coating is done by Pure Polyester powder with 60 to 70 micron thickness.

Seated Puller • DIMENSIONS: - 1900mm (Length) x 740mm (Width) x 1920mm. (Height). • SAFE AREA:- 1.2Mtr x 3Mtr • Seated puller equipment made up of "B" Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters • The center pipe is of 100NB made from "B" Class G.I. pipe. • Bottom support i s of M.S. round plate of 0 250 mm & 8mm thickness is welded. • All linkages are made up of 25NB "B" class G.I. pipe. • The handle frame is of 32NB "B" class G.I. pipe. • The seat frame is of 32NB "B" class G.I. pipe, • To build structure bushes are used which are made from seamless pipe of 50mm O.D. and 5mm thickness as well as 50mm diameter solid bar bush is used. • The foundation used for fixing is a structure and made from center pipe of ms of 65 NB "C" class. Welded with M.S. round plate of 0250 mm & 8mm thick. • The seats and Back rests are fitted on the outer frames a r e made up of M.S. Sheet of size 330 mm X300 mmX2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges. • Closing Caps are made up of high qualityLLDP Plastic material. • Pins used of Diameter 25mm and 17mm are made up from SAE 8620 bright material. • The bearings used are of " 6205zz" and "6203zz" permanent lubricated sealed bearing of reputed brand. • High tensile steel with galvanized nuts & bolts are used for assembly. • The powder coating done with Pure Polyester powders of Ackzonoble or Berger Paints with 60 to 70 micron thickness.

THI-CHI SPINNER (2 WHEEL) • DIMENSIONS: - 700mm (Length) x 1000mm (Width) x 1280mm (Height). • Safe Area:- 1.9Mtr X 1.9Mtr • Thi chi spinner Equipment made up of "B" Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. • The center pipe is of 100NB made up of "B" Class G.I. pipe. • The handle movement round frame is made up from 25 NB "B" class G.I. pipe • The foundation used for fixing is a structure and made from center pipe of G.I. of 65NB "B" class Welded with M.S. round plate of 0250 mm & 8mm thick. • Closing Caps are made up of high quality LLDP Plastic material. • The pins used are made up of 0 25 mm of SAE8620 bright material. • The bearing used is 6203zz" permanent lubricated sealed bearing of reputed brand. • High tensile S. S. nut bolts are used for assembly. • The nylon bush is used for handle knob. • The powder coating done with pure Polyester powders with 60 to 70 micron thickness.

SURFING BOARD • DIMENSIONS: - 1000mm (Length) x 600mm (Width) x 1400mm.(Height). • Safe Area:-1.5 x 1.3Mtr. • Surfing Board Equipment made from "B" Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters • T h e main frame is of 100mm NB made from "B" class G.I. pipe. • The bottom support welded of M.S. plate of 0 250 mm & 8mm thickness. • The handle frame is of 25N B made from "B" class G.I. pipe. • The foundation used for fixing is a structure and made from center pipe of MS. of 65NB "C" class welded with M.S. round plate of 0250 mm & 8rnm thick. Main • Bushes are used 50mm Outer Diameter with 5mm thickness is used. • The footrests made froM MS CHEQUER PLATE • Closing Caps are made up of high quality LLDP Plastic material. • T h e pins used are made up of 035 mm SAE 8620 bright material. • The bearing used are of "6205zz" permanent lubricated sealed bearing of reputed brand. • High tensile steel with galvanized nut bolts are used for assembly. • The powder coating is done with Pure Polyester powder with minimum 60 to 70 micron thickness

BACK EXTENSION DIMENSIONS: - 1400mm (Length) x 700mm (Width) x 820mm (Height). SAFE AREA: - 2.4Mtr x 1.7Mtr. Back Extension Equipment made from "B" MS Pipe of different NB pipe. (NB stands for Nominal Bore i.e. Internal Diameter of pipe in mm). The main frame is of square pipe. The Foot resting frame ms plain sheet. The handle frame is of 25NB made from "B" Class G.I. pipe. The seat fitted on the outer frames i s made up of M.S. Sheet of size 330mm X 300mmX2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges. The foundation used for fixing is consists of 50mm NB made from "B" Class MS. pipe.

UNEVEN BAR DIMENSIONS: - 3200mm (Length) x 1360mm (Width) x 2850mm.(Height). • SAFE AREA: - 5.4Mtr x 5.2Mtr. • Uneven bar Equipment made from “B” class G.I. Pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters • The main frame of 50 NB made from “B” Class G.I. pipe, and • The bottom support of M.S. round plate of Ø250 mm & 8mm thickness is welded at bottom. • The handle frame is of 32mm NB made from “B” Class G.I. pipe. • The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “C” class Welded with M.S. round plate of Ø250 mm & 8mm thick.• Closing Caps are made from aluminum casting of 3 mm thickness. • The powder coating done with Polyester powders with 60 to 70 micron thickness.

PARALLEL BAR Specification Pipe- structure made of MS. Pipe (IS1239- 2004) OF 2” and 42 OD OF 3 to 4 mm thickness