CONSTRUCTION OF ABC COMPLEX , BEGAMPUR KHATOLA MUNICIPAL CORPORATION GURUGRAM

Amount

Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make.75 mm dia

Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make 110 mm dia

Providing and fixing vertical blinds made of vinyl fabric and Aluminum sliding hardware as per design , shade and pattern approved by architect , of make wintek or vista (NS)

Providing and fixing C.P. flange (cap)

Supply of iron J- hook complete in all respect

Supply of G.I tank connecting nipple for connecting tank of 25 mm internal dia with check nuts

Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make..Single Tee with Door 75mm dia

Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make...Single Tee with Door 110mm dia

Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make Single `Y` with Door 75mm dia

Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make Single `Y` with Door 110mm dia

Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make Bend 45 Dg. 75mm dia

Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make Bend 45 Dg. 110 mm dia

Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make Nahni Trap with Jali 4” 110 mm dia

Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make Nahni Trap with Jali 4” 75 mm dia

Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make supreme / kasta Coupler (socket).160 mm dia

Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make supreme / kasta Coupler (socket).200 mm dia

Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make supreme / kasta Single Tee with Door 160 mm dia

Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make supreme / kasta Bend 45 Dg. 160 mm dia

Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make supreme / kasta Door Bend 87.5 Dg. 160 mm dia

Providing and fixing gunmetal equilibrium float valve with S.S. rod and 2 mm thick copper float, tested for 10 Kg/Sq.cm complete including companion flanges, nuts, bolts, washer etc. complete in all respect.65 mm dia

Providing and fixing gunmetal equilibrium float valve with S.S. rod and 2 mm thick copper float, tested for 10 Kg/Sq.cm complete including companion flanges, nuts, bolts, washer etc. complete in all respect.50 mm dia

Making sewer connection with existing sewer line 450 mm

Providing Laying and jointing glazed S.W. pipes grade `A` (IS:651 marked) of approved make with spun yarn and stiff mixture of cement mortar 1:1, excavation and refilling of earth in all types of soil upto 1.2m depth, S.W. fittings, including testing of joints etc, complete.250 mm dia

Supply and lowering 150 mm dia, PVC pipe `having perforation 10-25 mm size all sides of the pipe in Zig-Zag fashion and making air vent at top including the cost of , Socket etc.

P / L of Double wall corrugated HDPE pipe confirming to IS : 14930 P - 1 and 2 with HDPE Coupler at 1 mtr. Depth below the ground for laying cable including making the trench and back filling , compaction of earth as required of Gemini or IS:14930 marked make. Outer Dia. / Inner dia. 110 / 95 mm

Providing/Laying P.V.C. / XLPE insulated and P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size. a) 3.5C x 25.0 Sq.mm

Providing/Laying P.V.C. / XLPE insulated and P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size.b) 3.5C x 120.0 Sq.mm

Supply, testing and commissioning of 120 W LED, IP-65/66 integral Street light fitting, pressure die-cast aluminium housing, powder coated light fitting complete with LEDs, total lumen out put shall not not less than 10100 lumens , heavy duty driver, THD less than 10%,100V-265V single phase AC system, surge protection, totally enclosed with toughened glass cover, pole mounting arrangement etc and as per specifications, complete as required Make: Bajaj,

Supply, installation, testing and commissioning of following type of LED/CFL fixtures including all fixing accessories, ballast/driver as required. All fixtures shall be supplied with lamps.Make: Crompton Greaves/Wipro/Bajaj/Phillips 10 Watts recessed mounted LED circular down lighter complete as required with minimum 840 Lumens

Supply, installation, testing and commissioning of following type of LED/CFL fixtures including all fixing accessories, ballast/driver as required. All fixtures shall be supplied with lamps.Make: Crompton Greaves/Wipro/Bajaj/Phillips 15 Watts recessed mounted LED circular down lighter complete as required with minimum 1400 Lumens

Supply, installation, testing and commissioning of following type of LED/CFL fixtures including all fixing accessories, ballast/driver as required. All fixtures shall be supplied with lamps.Make: Crompton Greaves/Wipro/Bajaj/Phillips 36 Watts recessed mounted LED square down lighter complete as required with minimum 3600 Lumens

Supply, installation, testing and commissioning of Box type LED Tube Light fixture made of Alluminium sheet channel 22 watts High efficiency 1900 lumens and high frequency replacable digital ballast. Make: Crompton Greaves/Wipro/Bajaj/

P / L of Double wall corrugated HDPE pipe confirming to IS : 14930 P - 1 and 2 with HDPE Coupler at 1 mtr. Depth below the ground for laying cable including making the trench and back filling , compaction of earth as required of Gemini or IS:14930 marked make. Outer Dia. / Inner dia. 100/95 mm

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 300x300 mm 400mm deep including with heavy duty ductile double sealed iron recessed frame and cover with load rating not less than 12.5 tonnes and as per Euro norms BS EN -124

roviding and fixing Toilet Cubicle System of requisite size Marinolam (ZMS Series), Greenlam or Equivalent as per approval of Engineer-In-Charge and the item shall be inclusive of all accessories and standard installation as per manufacturer`s specification. Material:Compact Laminate in panels.Made from solid grade compact high-pressure laminate as per IS:2046 and EN438- manufactured under high specific pressure ) 5 MPa and temperature 120°C with bunch of kraft papers impregnated with thermosetting phenolic resin and decorative papers made of cellulose fibre impregnated with thermosetting melamine resin which provide superior scratch, abrasion, heat, chemical, impact, graffiti and moisture resistance along with anti-bacterial properties. Panels have a black core that when machined, presents a distinctive black edge.Standard bottom gap should be 150mm. All pilasters will be made of 12 mm thick HPL compact panel with chamfered edge and completed with Nylon Pa6 made thumb turn lock set. Aluminium made door stopper profiles with rubberlinings for dampening the noise while door closing will be provided at the vertical ends of the pilasters. Pilasters will be anchored to the floor using Nylon PA6- made adjustable legs. The bottom gap is 150-100 mm. All intermediate partitions or dividers will be made of 12 mm thick Merino HPL compact laminate panels. They are affixed with aluminium made U-channel at their ends for ultimate stability of the syst

A) Supply, installation , Testing and commissioning of Solar water heating System with copper absorber made of Copper sheets 34 gauge / copper tubes (at least 10 nos.) 12.7 mm dia 0.56 mm thick riders and 2 no headers of copper tube dia 25 mm thickness, 0.71mm with flat plate collector length 1860 mm , width 1240 mm and height 100 mm. The Collector box shall be of Aluminum extruded channels of size 100mm x 25 mm and 1.6 mm thick. All water carriage system should withstand 4.5 Kg cm sq pressure, complete duly insulated from back and front with glazing with stainless steel storage tank (insulated) with temperature gauge, strainer, water meter 2 nos and HDPE/ LDPE cold water tank duly erected on existing MS angle/ channel stand with suitable electric backup , its control and wiring etc. duly erected on rooftop including all material and labour required to complete the job in all respect. 1000 LPD Capacity

Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make Vent Cowel 110mm dia

Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make Coupler (socket) 75mm dia

Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make Coupler (socket) 110mm dia

Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make Supreme/ kasta 160 mm dia

Extra for excavating trenches for pipes, cables, etc, in all kinds of metre soil for depth exceeding 3 m in depth, but not exceeding 4.5 m. (Rate is over corresponding basic item for depth up to 1.5 metre.)200 mm dia

Providing and fixing PVC floor trap ISI marked of the self-cleaning design with C.P brass hinged grating with frame with or without vent arm and including cement concrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects offset 110 dia mm

Providing and fixing PVC floor trap ISI marked of the self-cleaning design with C.P brass hinged grating with frame with or without vent arm and including cement concrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects offset 110 dia mm muli floor

Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make Door Bend 87.5 Dg. 75mm dia

Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make Door Bend 87.5 Dg. 110mm dia

Providing and fixing 900 mm high and 400 mm wide PVC /Metal letters with lighting,power supply etc as per details and design with suitable hardware to anchor the same on subsurface (NS)

Bidder Name

Amount

Dal Singh Atri Contractor(GSTN-06AUIPS1758B2ZM)

Shailesh Tomar(GSTN-06ACRPT9295M1ZB)

Ashok Kumar Garg(GSTN-06ABTPG1118P1ZC)

Vijender Kumar Contractor(GSTN-NA)

Kamal Kumar Gera(GSTN-NA)

Sh. Rajesh Kumar(GSTN-NA)

Dal Singh Atri Contractor

Vijender Kumar Contractor

Kamal Kumar Gera

Sh. Rajesh Kumar

Ashok Kumar Garg

Kamal Kumar Gera

Dal Singh Atri Contractor

Shailesh Tomar

Vijender Kumar Contractor

Sh. Rajesh Kumar