REPAIR/MAINT OF PERIMETER LIGHTS, HIGH MAST LIGHTS, SECURITY LIGHTS AND MISC E/M WORKS AT TECH AREA, 7 BRD, AF UNDER GE (AF) TUGHLAKABAD

Amount

S&F in replacement of PVC insulated multi stranded, multi core copper conductor wire of size 2.5 Sqmm, 3 core, 1100 Volts from looping box to street light/panel wiring circuits all as per site requirements and specified by Engr-in-charge. Make-Anchor/Finolex/Havells/WHMFDSKB32X5

S&F in replacemnt of PVC insulated and sheathed circular flexible copper conductor 1100 volts, of size 6 Sqmm 4 core from looping box to street light/panel wiring circuits complete all as per site requirements and specified by Engr-in-charge. Make-Anchor/Finolex/Havells

Dismantling of the old existing looping box duly disconnecting the incoming/outgoing cables & removing from site and supply, installation and testing of non transparent SMC Kiosk box of 3 phase with 4 Nos bus bar, 63 Amps aluminium 4 wire and 1 No Kit kat fuse of 10 Amps factory made out of 14 gauge steel sheet with locking arrangement in front side of suitable size 300x200x100 mm complete all as specified and directed by Engr-in- charge. Make: Universal switch gear control / tricolite/SMS panel

S&F in replacement of GI pipe of size 50 mm dia light grade for housing/protection to the LT cables complete all as specified & directed by Engr-in-Charge. Make - Tata/Jindal/Prakash

M&L for Painting to LT steel tubular poles of 9 mtr long including painting of MS work like cross arms, clamps, channels, bracings etc complete with machine spray after cleaning and preparation the surfaces, externally with two coats of aluminium paint duly making 30 cm width of circular bands 3 Nos alternatively 1 metre height from ground level with blue paint making back ground and writing numbering of poles complete all as specified and as directed by Engr-in-charge .

S&F in replacement of LED street light fitting of capacity 25 watt, cool white, complete with drivers and all accessories & making all necessary connection complete all as specified and directed by Engr-in-charge. Make: C&S/ Havells/ Crompton

S&F in replacement of street light bracket made out of light grade GI Pipe 40 mm nominal bore, 1.2 metre long tilted to 30 degree angle on 4 metre length along with flat iron clamp of 40 x 4 mm size 750 mm long duly drilled made to shape the bracket complete with nut bolt and washers including applying 2 coats of aluminium paint over a coat of red oxide primer all as specified and as directed by Engr-in-charge.

S&F in replacement of LED street light fitting of capacity 60 watt, cool white, complete with drivers and all accessories & making all necessary connections complete all as specified and directed by Engr-in-charge. Make- Havells/C&S/Crompton

S&F in replacement of LED street light fitting of capacity 30 watt, cool white, complete with drivers and all accessories & making all necessary connections complete all as specified and directed by Engr-in-charge. Make- Havells/C&S/Crompton

S&F in replacement of LED Flood light fitting of capacity 150 Watt energy saving environmental friendly, long life, exclusive innovative die-cast aluminium flood light with high power LEDs as light source suitable for highlighting architectura features of retail spaces complete all as directed. Make- Havells/C&S/Crompton

S&F in replacement of integral post top made in die cast aluminium housing with decorative clear opal acrylic diffuser and IP 65 protection capacity 1 x 40 Watts complete all as specified and as directed by Engr-in-charge. Make- C&S/Havells/Bajaj

Disconnecting/unscrewing of all electrical connections of the UNSV flood light fitting from a height upto 12 mtr and S&F, commissioning & testing the high bay light of 80 Watt capacity suitable for 240 volts, 50 HZs single phase power supply, fabricated with die cast aluminium with high power LEDs as light source, IP 65 complete with all standered accessories all as directed by Engr-in-charge. Make: Havells/C&S/Crompton

S&F in replacement commissioning & testing of LED street light fitting of capacity 45 watt, cool white, complete with drivers and all accessories & making all necessary connection complete all as specified and directed by Engr-in-charge. Make- Havells/C&S/Crompton

Taking out U/S, burnt LT cable of any size from the trench in any depth complete all as specified and directed by Engr-in-charge. Note: Necessary earth work if any required shall be measured and paid separately under respective items.

M&L for Excavation in trenches in soft/loose soil not exceeding 1.5 metre depth and not exceeding 1.5 metre wide for laying of pipes/cables etc and getting out all as specified and directed by engineer in charge.

M&L for Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil complete all as specified and directed by engineer in charge.

Removing excavated material not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed by the Engineer-In-Charge

M&L for sand cushioning (dry sand) to underground cable for cable protection laid in trenches / in existing cable docts complete all as specified and as directed by Engr-in-charge. Note: Punned thickness shall be measured for payment purpose.

Supply and Laying of sub class 'B' bricks , locally available in trenches for protection of underground cable complete all as specified.

Supply, lay or fixing or passing through pipe cable of XLPE (FRLS) with aluminium conductor with heavy duty stranded, 1100 Volts of following sizes. Make- Havells / Polycab/Gloster

Size of cable 50 Sqmm x 3.5 core

Size of cable 25 Sqmm X 3.5 core

Size of cable 95 Sqmm X 3.5 core

Size of cable 120 Sqmm X 3.5 core

Size of cable 150 Sqmm X 3.5 core

Size of cable 35 Sqmm X 3.5 core

S&F in replacement of commissioning and testing of Flat panel 36 Watt LED luminaire suitable for ceiling and grid of size 600x600 mm with electronic driver complete all as specified and directed by the Engineer-In-Charge. Make- Havells/C&S/Crompton

M&L for repairing broken coping of pole foundation by using PCC (1:2:4) type B1 by using 20 mm graded aggregate as in pole base upto the height of 50 cm from the ground level and 600mm dia including necessary form work and painting with oil bound distemper over a coat of primer and finishing the surfaces all as specified and as directed by Engr-in-charge.

M&L for hiring of crane for carrout necessary repair and replacement of unserviceable parts of high mast security light in same location to reach upto the height of 20 mtr completed all as specified and directed by Engr-in-Charge

S&F in replacement of MCCB 4 pole, 415V, fixed thermal and magnetic setting of capacity 63Amp, breaking capacity 10 KA complete suitable for fixing inside of LT Panel/feeder pillar complete all as specified and directed by Engr-in-charge. Make- Havells/L&T/ Hager as approved

S&F in replacement of MCCB 4 Pole 415 V, Adjustable type 250 Amps with breaking capacity 36 KA suitable for fixing inside LT Pane l/ feeder pillar complete all as specified and directed by Engr-in-charge. Make- Havells/L&T/Legrand

S&F in replacement of MCCB 4 Pole 415 V, Adjustable type 160 Amps with breaking capacity 36 KA suitable for fixing inside LT Panel /feeder pillar box complete all as specified and directed by Engr-in-charge. Make- Havells/L&T/Legrand

M&L for street light timer switches, including testing and commissioning of NATURE switch for outdoor lighting automation using space grade sensors and an advances micro controller suitable for outdoor use having features automatic switching ON sunset, Automatic switching OFF at dawn, NO clock setting & time settings wide operating voltage range, high voltage trip and auto reset having specification 230 Volts,50 Hz complete with all connected accessories of rating 12 KW 3 phase, current range 40 Amps complete all as specified and directed by Engr-in-charge. Make: Kaktiya energy system Model No SWADEEP02EC12KWP3P or Universal Switch Gear equivalent.

S&F in replacement of MCCB 4 Pole 415 V, Adjustable type 200 Amps with breaking capacity 25 KA complete suitable for fixing inside LT Panel /feeder pillar box complete all as specified and directed by Engr-in-charge. Make- Havells/L&T/Legrand

Deepak Electricals

V r traders

R R Associates

Surjit and Sons