Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.1 CrAdmitted-Finance | ₹1.1 Cr | L1 | Admitted-Finance |
| 2 | L2₹1.2 Cr+₹12.4 L (11.5%)Admitted-Finance NO 107 ASHOK NAGAR GANDHI NAGAR POST NEYVELI 607 308 | NEYVELI | CUDDALORE | TAMIL NADU | 607308 | ₹1.2 Cr+₹12.4 L (11.5%) | L2 | Admitted-Finance |
| 3 | L3₹1.4 Cr+₹28.5 L (26.3%)Admitted-Finance | ₹1.4 Cr+₹28.5 L (26.3%) | L3 | Admitted-Finance |
| 4 | L4₹1.4 Cr+₹31.1 L (28.7%)Admitted-Finance | ₹1.4 Cr+₹31.1 L (28.7%) | L4 | Admitted-Finance |
| 5 | L5₹1.4 Cr+₹32.6 L (30.2%)Admitted-Finance | ₹1.4 Cr+₹32.6 L (30.2%) | L5 | Admitted-Finance |
| Sl No | Description | Qty | Unit | SELVA GANAPATHY ENGINEERING L3 | M/S SRI VENKATESHWARA CONSTRUCTIONS L1 | ENGINEERING CONSOLIDATED L5 | VAIKAM ENGINEERING L4 | JK ENGINEERS L2 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Collection of FIM - SS 304L plates (3000 x 1250 x 3 mm) from store, transportation, MIC clearance, marking, cutting (including cutouts wherever required), forming, bending, fabrication of liner matching to the embedded grid structure in the specified area of wall and floor, surface treatment (detergent & acid cleaning). The scope also includes cutting of temporary blinds in the pipe EPs. This item does not include the cost of welding. | 1,300 | Sq. m | 895 ₹11,63,500 | 300 ₹3,90,000 Lowest | 3,000 ₹39,00,000 | 2,100 ₹27,30,000 | 450 ₹5,85,000 |
| 2.00 | Collection of FIM sheets from store, transportation, MIC clearance, marking, cutting (including cutouts wherever required), cold forming / bending of sheet to match the angle grid profile of wall - wall corner and wall - floor corner and installation of the same over the embeded angle grid as per approved drawings. Cold bending shall be done by pressing with suitable die. The bend area shall be DP tested and passivated. This item does not includ the cost of welding. | 200 | Sq. m | 1,275 ₹2,55,000 | 400 ₹80,000 Lowest | 3,500 ₹7,00,000 | 2,500 ₹5,00,000 | 650 ₹1,30,000 |
| 3.00 | Collection of FIM sheets from store, transportation, MIC clearance, marking, cutting (including cutouts wherever required), cold forming / bending of sheet to match the angle grid profile of wall-wall-floor corner contour (tri-junction weld joint). The liner sheet shall be cut into three pieces, bent and welded together to match the corner contour. Cold bending shall be done by pressing with suitable die and butt welding by GTAW. Weld joints require root pass LPE, Final Pass LPE, 100% X-Ray radiography & local passivation. The bent surfaces are to be tested by LPE and passivated. . | 125 | Nos. | 4,000 ₹5,00,000 | 1,200 ₹1,50,000 Lowest | 8,000 ₹10,00,000 | 3,000 ₹3,75,000 | 5,000 ₹6,25,000 |
| 4.00 | Surface Preparation of Vertical & Horizontal concrete surfaces and their leveling with CS angle EP to enable laying of ss liner sheet with perfect contact. There shall not be any air gap betwwen plate and concrete wall / floor. Excess hard concrete shall be removed by portable concrete surface grinders with diamond tools without using chisel and hammer. The under fill concret suraface shall be suitably filled. | 1,200 | Sq. m | 2,000 ₹24,00,000 | 400 ₹4,80,000 Lowest | 1,300 ₹15,60,000 | 450 ₹5,40,000 | 400 ₹4,80,000 Lowest |
| 5.00 | Square Butt welding of SS 304L 3 mm thick sheet with SS 304L 3 mm thick sheet over embedded CS angle using ER 309L filler wire & GTAW process. 100% LPE for both root & final pass followed by local passivation of weld joints. Before final pass LPE, all weld reinforcement shall be flush ground. It also includes the cost of fit-up and tack welding of liner plates with cleaned CS grid angle. | 2,700 | m | 1,900 ₹51,30,000 | 1,900 ₹51,30,000 | 1,300 ₹35,10,000 Lowest | 1,900 ₹51,30,000 | 1,700 ₹45,90,000 |
| 6.00 | Fillet welding of SS 304L 3 mm thick sheet over embedded CS angle and CS embedded plate using ER 309L filler wire & GTAW process. LP examination (LPE) and local passivation of weld joints. | 1,950 | m | 950 ₹18,52,500 | 1,600 ₹31,20,000 | 600 ₹11,70,000 Lowest | 1,400 ₹27,30,000 | 1,700 ₹33,15,000 |
| 7.00 | Plug welding of liner sheet with embedded CS angle using ER 309L filler wire & GTAW process. Flush grinding of excess reinforcement & 100 % LPE followed by local passivation. It also includes the cost of drilling of 10 mm dia. hole in the liner sheet. | 2,350 | Nos. | 100 ₹2,35,000 Lowest | 150 ₹3,52,500 | 400 ₹9,40,000 | 200 ₹4,70,000 | 250 ₹5,87,500 |
| 8.00 | Vacuum box leak testing of the Run weld joints as per approved procedure. | 3,300 | m | 500 ₹16,50,000 | 300 ₹9,90,000 | 250 ₹8,25,000 Lowest | 330 ₹10,89,000 | 350 ₹11,55,000 |
| 9.00 | Vacuum box leak testing of the Plug weld joints as per approved procedure. | 2,350 | Nos. | 200 ₹4,70,000 | 50 ₹1,17,500 Lowest | 200 ₹4,70,000 | 150 ₹3,52,500 | 250 ₹5,87,500 |
Tender Value
₹1.5 Cr
EMD Value
₹3.1 L
Closing Date
16 Oct 2024, 3:00 pmClosed
Project Director
Office of the Project Director, FRFCF-NRB, Kalpakkam
SS Lining of Process Cells in Zone-III of WMP, FRFCF, Kalpakkam
2024_BARC_826271_1
NRB/FRFCF/UT-II/ETR-013/2024
Open Tender
Machineries/ Mechanical Engg Items
Item Rate
365 days
FRFCF, Kalpakkam
Please Refer Tender Document
8 documents required · 8 mandatory
₹0
₹3.1 L
Admin Building, FRFCF
1 Jan 2025
18 Sept 2024
23 Oct 2024
19 Sept 2024
16 Oct 2024
28 Sept 2024
20 Sept 2024 - 25 Sept 2024
26 Sept 2024
Amount
Collection of FIM - SS 304L plates (3000 x 1250 x 3 mm) from store, transportation, MIC clearance, marking, cutting (including cutouts wherever required), forming, bending, fabrication of liner matching to the embedded grid structure in the specified area of wall and floor, surface treatment (detergent & acid cleaning). The scope also includes cutting of temporary blinds in the pipe EPs. This item does not include the cost of welding.
Collection of FIM sheets from store, transportation, MIC clearance, marking, cutting (including cutouts wherever required), cold forming / bending of sheet to match the angle grid profile of wall - wall corner and wall - floor corner and installation of the same over the embeded angle grid as per approved drawings. Cold bending shall be done by pressing with suitable die. The bend area shall be DP tested and passivated. This item does not includ the cost of welding.
Collection of FIM sheets from store, transportation, MIC clearance, marking, cutting (including cutouts wherever required), cold forming / bending of sheet to match the angle grid profile of wall-wall-floor corner contour (tri-junction weld joint). The liner sheet shall be cut into three pieces, bent and welded together to match the corner contour. Cold bending shall be done by pressing with suitable die and butt welding by GTAW. Weld joints require root pass LPE, Final Pass LPE, 100% X-Ray radiography & local passivation. The bent surfaces are to be tested by LPE and passivated. .
Surface Preparation of Vertical & Horizontal concrete surfaces and their leveling with CS angle EP to enable laying of ss liner sheet with perfect contact. There shall not be any air gap betwwen plate and concrete wall / floor. Excess hard concrete shall be removed by portable concrete surface grinders with diamond tools without using chisel and hammer. The under fill concret suraface shall be suitably filled.
Square Butt welding of SS 304L 3 mm thick sheet with SS 304L 3 mm thick sheet over embedded CS angle using ER 309L filler wire & GTAW process. 100% LPE for both root & final pass followed by local passivation of weld joints. Before final pass LPE, all weld reinforcement shall be flush ground. It also includes the cost of fit-up and tack welding of liner plates with cleaned CS grid angle.
Fillet welding of SS 304L 3 mm thick sheet over embedded CS angle and CS embedded plate using ER 309L filler wire & GTAW process. LP examination (LPE) and local passivation of weld joints.
Plug welding of liner sheet with embedded CS angle using ER 309L filler wire & GTAW process. Flush grinding of excess reinforcement & 100 % LPE followed by local passivation. It also includes the cost of drilling of 10 mm dia. hole in the liner sheet.
Vacuum box leak testing of the Run weld joints as per approved procedure.
Vacuum box leak testing of the Plug weld joints as per approved procedure.
JK ENGINEERS (BID ID -3104129)
SELVA GANAPATHY ENGINEERING (BID ID -3104213)
VAIKAM ENGINEERING (BID ID -3104660)
ENGINEERING CONSOLIDATED (BID ID -3104653)
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 1.22 MB
TenderDocument.pdf.pdf
Tender Documents • 1.72 MB
BOQ_868315.xls
BOQ • 0.29 MB
TenderDrawings013.pdf
Additional Documents • 16.86 MB
GCC2014.pdf
Additional Documents • 4.88 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .