REPAIR TO JOINERY WORKS AT NAVY NAGAR, AYUDH VIHAR -II, SANDHANI, STATION GYM AND GE OFFICE COMPLEX UNDER AGE B/R-I AT KARANJA

Amount

Taking down chowkats or frames including shutter (without taking off shutters from the frame) area n exc. 1.5 Sqm each. all as specified and directed.

All as per item above but exc 1.50 Sqm n.exc 4 Sqm. all as specified and directed.

Taking down shutters of any description exc 1 sqm and n exc 2 sqm each. all as specified and directed.

Taking down shutters of any description n exc 1 sqm each. all as specified and directed.

Taking down shutters of any description exc 1 sqm and n exc 2 sqm each and refixing in same opening incl easing, adjusting etc all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado/widow & pillar over 10mm thick plater in CM (1:3) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified.

Providing and fixing factory made uPVC white colour sliding window three track made of extruded profiles with wall thickness of 2.3mm(+-0.2mm). Window prifile with hollow section with multi chamber. Frame (88mmx52mm), sliding sash (42mmx67mm). Sliding interlock (one verticle length in each shutters) (45.5mmx28mm). Glazing bead (24.5mmx16mm) will be mitred cut and fusion welded at all corners, incl drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket. 1.2+-0.2 mm thick , galvanized steel frame (30mmx 18mm) 02 nos, sliding sash (30mmx18mm) , sliding mesh sash (26mmx10mm) profile to be inserted in required profile , frame will be fixed to wall with 8mmx100mm long fasteners Hard ware : [ Touch lock of zinc alloyed (white powder coated ) , steel roller system. Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and required accesories incl 5.5mm thick toughened glass & all connetcted items .

a) Area not exceeding 2.00 sqm each

b) Area exceeding 2.00 sqm each

Door Espag

Centre Striker

Striker

Drainage

Glazing Bridge

Silicon Sealant(any size of windows)

S&F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDMrubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

S&F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge.

S&F Aluminium anodised grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC15) of approved design/pattern(DG 104), with approved standard section and fixed to existing window frame with CP brass/stainles steel screwnot less than 50mm and @ 200mm c/c, incl cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised alu standard section ( 28mm x 19mm x 2mm thick)around the opening, all complete as per requirement and direction of EIC.

S&F 4 mm thick sheet glass ordinary quality and glazing complete in square exc 0.50sqm each.

S&F 4 mm thick sheet glass ordinary quality and glazing complete in square n exc 0.50sqm each.

S&F in repairs 4 mm thick sheet glass ordinary quality and glazing complete in square exc 0.50sqm each.

S&F in repairs 4 mm thick sheet glass ordinary quality and glazing complete in square n exc 0.50sqm each.

S&F 4mm thick frosted glass, ordinary quality and glazing with oil putty of any size pane complete all as specified.

M&L 2nd class HW, Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chanbered, put together with glue pinned at joints.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm(double rebat) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately).

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately).

S&F 150mm long and 12mm dia stainless steel fasteners with round shape head all as specified.

S&F 35mm thik plain, framed, factory made panelled shutter(two panel) with lock rail and panel of 9 mm B.W.P. commercial veneering particle board on both faces. The size of rail and stile as per IS : 1003(Part-1), kiln in seasoned and chemically pressure treated.

S&F 35mm thick 2nd class HW, glazed and skelton shutters open rebated and prepared to receive glass / gauge (without sash bar) edges of forming plain chamfered sorrounded fitted with cut and mitred bead for securing glass / gauge etc size of shutter as per SSR part-1 section 8 clause 8.24(a).

S&F Factory made solid panel PVC door shutter 30mm (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded wood grain printed PVC sheet used 5mm thick x 15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90o) used instead of exposed portion of PVC sheet beading panelling of wood grain printed PVC sheets to be fitted in the MS frame welded sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supling & fixing in the frame at the site as per specification and drawing shown in SSR Pt-I all as directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with MS square tube and edges will be painted to match with printed sheet fixing in opending as per specification and drawing etc complete all as specified.

S&F MS butt hinges100mm long medium weight, cold rolled.

S&F in repairs repairs MS butt hinges100mm long medium weight, cold rolled.

S&F 100 mm long ,Butt hinges, extruded aluminiumalloy with galvanised mild steel hinge pin, anodised and fixed, type B-21.

S&F in repairs 100 mm long ,Butt hinges, extruded aluminiumalloy with galvanised mild steel hinge pin, anodised and fixed, type B-21.

S&F 125 mm long extruded alu alloy handles, fabricated type, anodised.

S&F in repairs 125 mm long extruded alu alloy handles, fabricated type, anodised.

S&F 150 mm long extruded alu alloy handles, fabricated type, anodised.

S&F in repairs 150 mm long extruded alu alloy handles, fabricated type, anodised.

S&F 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy.

S&F in repairs 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy.

S&F 150mm long Aluminium,anodized barrel tower bolts of extruded section and fixed.

S&F in repairs150mm long Aluminium,anodized barrel tower bolts of extruded section and fixed.

S&F 200mm long Aluminium,anodized barrel tower bolts of extruded section and fixed.

S&F in repairs 200mm long Aluminium,anodized barrel tower bolts of extruded section and fixed.

M&L Preparation of new wooden surfaces over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer.

M&L Preparation of old wooden surfaces over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint.

Preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aparture 1.40 mm and fixed with stainless steel wire staples.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aparture 1.40 mm and fixed with stainless steel wire staples as in repairs.

Taking down cement plaster of any description incl raking out joints, hacking for key, scrubbing down with water etc.

M&L 20 mm thick polymer modified ready mix cement based plaster on external surfaces complete all as specified and directed.

M & L 15 mm thick ready mixed cement base plaster on internal surfaces on brick or concrete surfaces complete all as specified and directed.

M & L for preparation of newly or untreated plastered surface applying two coats of oil bound distemper (OBD) over a coat alkali resistant primer complete all as specified and directed.

M&L for for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

S&F Aluminium anodised tubular tower rail, 20 mm dia fixed between brackets

S&F Aluminium anodised brackets for 20mm dia tower rail.

Dismantling wall and celling boards (fibers pulp insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets

S&F 12 mm thick Pre-laminated particle board, exterior grade, prelaminated on both side with decorative choice lamination and other side balancing white lamination including fixing of teak wood beading on open edges in any position such as cup boards, drawers shutters etc. fixed with screws and incl all fittings, tower bolt, handle, knob, magnet to timber frame work complete all as specified .

S&F 18/19mm thick Pre-laminated particle board, exterior grade, prelaminated on one side with decorative choice lamination and other side balancing white lamination including fixing of teak wood beading on open edges in any position such as cup boards, drawers shutters etc. fixed with screws and incl all fittings, tower bolt, handle, knob, magnet to timber frame work complete all as specified .

Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles and removing debris and depositing complete all as specified and as directed.

M&L Glazed ceramic coloured tiles, of size 300x200x7mm/400x200x7mm thick on vertical surfaces such as skirtinh/dado/risers etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment match the colour of tiles with and incl 10mm thick backing coat in CM 1:4.

M/s Vishwakarma Enterprises