Giving electric connection by fixing transformer at Hosaholalu Solid Waste Management unit inKRPete TMC limit and other continued electric works

Giving electric connection by fixing transformer at Hosaholalu Solid Waste Management unit inKRPete TMC limit and other continued electric works

RCC Pole - 9 Mtr Long, 145 Kg WL(Dwg No. BESCOM/GM/QS&S/02 Dtd 24.11.2018) as per IS-785

PSCC Pole - 9 Mtr Long, 200 Kg WL (Dwg No. BESCOM/GM/QS&S/50 Dtd 24.11.2018) as per REC Standards

PSCC Pole - 8 Mtr Long, 200 Kg WL(Dwg No. BESCOM/GM/QS&S/49 Dtd 24.11.2018) asper REC Standards

PSCC Pole (200 Kg WL) Clamp - MS(Dwg No. BESCOM/GM/QS&S/31 Dtd 24.11.2018)

11 kV, Horizontal Cross Arm - Galvanised Iron (GI)

LT 2 Pin Cross Arms - GI

HT ST Support 50x8 mm Flat - MS(Dwg No. BESCOM/GM/QS&S/04 Dtd 24.11.2018)

11 kV, 5 kN Composite/Polymeric Pin Insulator (24 mmdia FRP Rod)

Silicon rubber composite insulator 11 kV, 45 kN Polymeric Insulator

Rabbit ACSR(6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/KM

H - Frame Set for fixing 11 kV, 200 Amps Single Break GOS - (For DP structure for providing New GOS for sectionalisation) - MS

11 kV, 200 Amps Single Break Polymer Type Post Insulators GOS

Guy Clamp - MS(Dwg No. BESCOM/GM/QS&S/07 Dtd 24.11.2018

Turn Buckle (GI) (Dwg No. BESCOM/GM/QS&S/07 Dtd 24.11.2018)

Anchor Rod using 12 mm rounds/Guy Rod - MS (Dwg No. BESCOM/GM/QS&S/07 Dtd 24.11.2018)

No. 15 Strain Insulator

7/10 SWG Guy Wire(7/3.251 mm Dia), Std Wt: 680 Kg/KM

Transportation charges for poles:25 to 105 mtr

Loading and unloading of Pole (loading of Pole to vehicles at stores and unloading atworkspot) 8 Mtr RCC/PSCC Pole NOTE:- Consolidated amount for both loading and unloading.

Loading and unloading of Pole (loading of Pole to vehicles at stores and unloading at workspot) 9 Mtr RCC/PSCC Pole NOTE:- Consolidated amount for both loading and unloading

Digging of Pit 1.6 Mtr depth for erection of 7.5/8 Mtr Long Steel/RCC/PSCC supports as per approved Drawing.

Digging of Pit 1.8 Mtr depth for errection of 9 to 10 Mtr Long Steel/RCC/PSCC supports as per approved Drawing.

11 kV, DOLO Cutout Conventional to Erstwhile KEB Specification

HT & LT Metering Equipment:11 kV HT Metering cubicle of different CT Ratio, Both side cable entry type with 3 CT & 3 PT, With Transparent Cover TTB, with 30x8 mm Copper Busbar, Modem & 2 No of Meters ...

Erection of HT Metering Cubicle, LT Metering Cubicle, LT Feeder Piller Box, LT Distribution Box HT Metering Cubicle, LT Metering Cubicle

Fixing Metering Box for housing the ETV Meter 3 Phase 4 Wire along with CT's, Meter & wiring for DTC.

Distribution Transformer - 3 Phase, 11kV/433V - Amorphous Core with Oil as per IS-1180 (Part-1): 2014 250 kVA, Aluminium Wdg, Star 2 (5 Star)

Erection of Transformer & Structures.

Loading & Unloading of Transformer (when maintaince men for loading and unloading are not available in store)-250/300 KVA

Earth Work Excavation for pipeline/cables by manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shorting, strutting,barricading, caution lights,...

Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...

Heavy Duty Copper Terminal Long Barrel.(P.No.26 I.No.59.05 in CSR Escom's Electrical Volume-6 SR-2023-24) 95 Sqmm Copper Terminal, Apprx Wt: 58 Gm

Heavy Duty Copper Terminal Long Barrel.(P.No.26 I.No. 59.10 in CSR Escom's Electrical Volume-6 SR-2023-24) 240 Sqmm Copper Terminal, Apprx Wt: 218 Gm

GI/Copper strips for grounding connections,using necessary fixing materials as required.600 x 600 x 3 mm Copper plate

GI/Copper strips for grounding connections,using necessary fixing materials as required. 25 x 3 mm Copper strip

GI/Copper strips for grounding connections,using necessary fixing materials as required.25 x 3 mm GI strip

Supplying fixing and wiring earth electrode for grounding of lifts, transformers,DG sets etc.using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed on ...

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit shoul...

Fixing of DOLO, GOS, LA, Fuse Board, Service Mains, Spacer, Insulator Etc.,Fixing of GOS including wiring (11 kV Double Break 400 Amps)

8 SWG GI Wire(4.064 mm Dia), Std Wt: 131 Kg/KM

Pipe Grounding -Good Quality Salt for grounding purposes packed in 50 Kg gunny bag

Pipe Grounding -Good Quality well burnt charcoal for grounding purpose packed in non returnable gunny bag of 30kg each

Laying the GI Pipe 80 mm to 150 mm dia at Drainage Water Supply Crossing including fixing collars elbows, bends, Tees and other fitting with Cuts and Threads wherever necessary complete.

95 Sqmm -11kv-3core-XLPE HTUG Cable(Round Armoured), (54 GI Wires - 2.5 mm Dia)

Making and Fixing pot head for HT Cable only Heat shrinkable Type Terminations3x185 to 3x240 Sqmm

Bolts and nuts of sizes full threadd-GI-B and Nsize 16x175 mm

Miscellaneous Materials for Burnt Brick (Class 35 Modular) g

LT Distribution Box for 250 kVA DTC with MCCB's (Sheet Metal)(Dwg No. BESCOM/GM/QS&S/08 Dtd 24.11.2018)

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975240 Sqmm,...

Transporting Cable from Store to work spot including loading and unloading (including Crane and other equipment charges if any). 120 to 240 Sqmm (3.5/4 Core)

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per s...

Providing and fixing RCC precast fencing pole of Size 0.15x 0.15x2.0 Mtr casted in M20 with 20mm down size aggregates making holes for drawing barbed wire at 30cm c/c using 8 mm dia vertical 4 TMT ste...

Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., complete....

Providing and Fixing G.I. Chain link fabric fencing of required width in mesh size 50X50mm including strengthening with 2 mm dia wire or nuts, bolts, and washers as required complete as per the direct...

3 Phase CT/PT operated alternating current Smart Meter of Accuracy Class 0.2s DLMS with GPRS

Communication Module