PROVN OF GUARD ROOM WITH ATTACH TOILET OF 08X PERSONS FOR MT PARKING AT ILP-II AND OTHER SANCTIONED WORKS AT PMS UNDER GE PANAGARH

Amount

Excavation in trenches not exc 1.5m wide and not exc 1.5m deep for foundation etc or for shafts n.ecx 10 Sqm on plan and n.exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches n.exc 1.5m wide, exceeding 1.5m deep and not exc. 3.0 m depth and getting out in soft/loose soil complete all as specified and directed.

Removing excavated soils to a distance not exceeding 50 Metres and depositing where directed at a level n. exc. 1.5 M above the starting point complete all as specified and directed.

Returning, filling in incl spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft /loose soil complete all as specified and directed.

M&L for sand filling under floors or in foundation including watering and consolidation ,complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregates) as in bed concrete for foundation filling & mass concrete.complete all as specified and directed.

S&F mild steel TMT bars 10 mm dia. and over, cut to length, bend to shape required including cranking, bending spirally for hopping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified and directed

M&L for mild steel TMT bars 5mm dia and over upto including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M&L for reinforced cement concrete (Design Mix) M-25 (using 20mm graded stone aggregate) foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc. and mass concrete etc ,complete all as specified and directed. (Note :- contractor shall submit test report before execution of work).

M&L for reinforced cement concrete (Design Mix) M-25 (using 20mm graded stone aggregate) in columns, pillars, piers, etc.omplete all as specified and directed. (Note :- contractor shall submit test report before execution of work).

M&L for reinforced cement concrete (Design Mix) M-25 (using 20mm graded stone aggregate) in beams, cantilevers, bressummers, lintels over 1.5m span.omplete all as specified and directed. (Note :- contractor shall submit test report before execution of work).

M&L for reinforced cement concrete (Design Mix) M-25 (20mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like.omplete all as specified and directed. (Note :- contractor shall submit test report before execution of work).

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter complete all as specified and directed.

Use and waste of formwork for rough finished surface of concrete (flat surface) to sides of pillars, posts, struts, piers, columns, and stanchions ,complete all as specified and directed.

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.omplete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work for rough finished surface, not exceeding 200m thick (Horizontal or sloping), complete all as specified and directed.

M&L for rendering 10 mm thick on fair faces of roof surfaces or concrete surface in cement mortar (1:4) complete all as directed .Complete all as specified and directed.

M&L for preparation of new surfaces of roof and applying two coats of Polyurethane (PU) acrylic based water proofing liquid compound over and including one coat of self priming primer @ one litre per 10 Sqm with reinforcing fabric sheet as per manufacturer's instructions to stop leakage/seepage from roof/wall complete all as specified and as directed by the Engr-in-Charge. (Notes :- (i). As per description of this item, minimum two coats of Polyurethane (PU) acrylic based water proofing liquid compound over one coat of primer shall be carried out as per manufacturer's instruction. Please note no price adjustment shall be made, if as per manufacturer's instructions more coats of Polyurethane (PU) acrylic based water proofing liquid compound and primer are required for roof treatment. (ii). Quoted Rate shall be deemed to be included for work in building/structure of any height.

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as directed.

M&L for fly ash brick straight or curved on plan exc 6 mtr mean redious built in cement mortar (1:6) etc complete all as specified and directed.

M&L for fly ash bricks straight or curved on plan to any radius in half bricks thick walls, built in cement mortar (1:6) complete all as specified and directed.

Taking down cement plaster of any description on concrete surfaces such as soffit of RCC slab, chajjas and brick walls etc including raking out joints, hacking for key, scrubbing down with water etc,complete all as specified and directed.

M&L for rendering 15 mm thick, cement plaster, in cement mortar (1:6) on fair face of brickwork in walls and finishing surface even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15 mm thick cement plaster in cement mortar 1:4 on external fair faces of brick/concrete work surfaces finished even and smooth mixed with water proofing compound as per manufacturer’s instructions finish even & smooth without using extra cement, complete all as specified and directed. (Note: WPC will be measured and paid separately under relevant item).

M&L for rendering 5 mm thick cement plaster in cement mortar (1:6) on ceiling surfaces and finish the surface fair and even and smooth without using extra cement, complete all as specified and directed.

Supply only integral water proofing compound.

M&L for preparation of new wall surfaces and applying two coat of oil bound distemper over a coat of alkali resistant priming paint over one coat of putty , complete all as specified as directed. (Make: M/s Tractor Acrylic Distemper of Asian/M/s Bison Acrylic Distemper of Berger, M/s No 1 Premium Acrylic Distemper of Shalimar).

M&L for finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) after preparation of old wall surfaces with complete removal of existing finishes.complete all as specified as directed. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar).

M&L for preparation of new plaster surfaces of wall/ceiling and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces, complete all as specified and directed. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar).

M&L for complete removal of existing treatment, preparation of surfaces wall/ceiling and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004. Alkali resistance dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 0.90 litre/10 sqm over surfaces (the old painted surface shall be removed completely by mechanical scubbers with sand paper and manually where the mechane cannot reach, washing the surface with water and preparing surface if necessary with exterior wall putty to a uniform smooth surface of walls complete all as specified & directed . (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar).

M&L for preparation new plastered surfaces and applying three coats of white washing on ceiling , complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n. exc 15 cm thickness below or above ground level complete all as specified and directed.

M&L for hardcore broken bricks of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 75 mm thick plain cement concrete (1:4:8) type D2 (using 40 mm graded stone aggregate) as in sub base of floor/paving/hardstanding ,complete all as specified and directed.

M&L for 25 mm thick plain cement concrete 1:2:4 type B-0, (using 12.5 mm graded stone aggregate) as in floor for receiving screed bed,complete all as specified and directed.

M&L for non-skid ceramic, straight cut/joint free, 7 to 8 mm thick colored tiles, area of each tile exceeding 0.11 Sq.m but not exceeding 0.18 Sq.m, in floors etc. over and including 15 mm thick cement mortar (1:4) screed bed , set and jointed with grey cement slurry & pointed with grout of matching shade, complete all as specified and directed. (Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE)

M&L for glazed cermic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over including 10 mm thick rendering in cement mortar (1:3) complete all as specified and directed. Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be convered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitabale PVC sheet beading, and jointed together with solvant cement, and S&F in the frame at side as per specification and drawing.complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and directed.

S&F 2nd class hard wood plain solid straight chowkhat and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joint complete all as specified and directed.

S&F factory made 35 mm thick 2nd hard wood plain framed panelled shutters (two panel) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per ISI 1003 (part-I) kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F Steel windows with side hung shutters (minimum wt. of steel section should be 1.42 kg/M) including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and directed.

S&F steel ventilator with top hung shutter (minimum wt. of steel section should be 1.42 kg/M) including hinges, steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and directed.

S&F Sheet glass 5.5 mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane,complete all as specified and directed.

M&L for PCC (1:2:4) type B-0 (using 20mm graded stone aggregate) as in bed blocks for hold fast including necesssary formwork, complete all as specified and directed.

S&F mild steel flat iron of size 30 X 5 mm work as in hold fast and similar small articles including required cutting, bending and fixing complete, mild steel conforming (Fe-410-0 or Fe-310-0) complete all as specified and directed.

S&F 100 mm size butt hinges extruded aluminium alloy with galavanised mild steel hing pin anodised and fixed type C-21,complete all as specified and directed.

S&F aluminium, anodized barrel tower bolts of extruded section and fixed, 200 mm long, dia of bolt not less than 10 mm, ISI marked, complete all as specified and directed.

S&F aluminium handles, cast type anodized of size 150 mm, ISI marked, complete all as specified and directed.

S&F 300 mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy and fixed.complete all as specified and directed.

M&L for galvanized steel tubing, medium grade, 15 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor, complete all as specified and directed.

M&L for galvanized steel tubing, medium grade, 20 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor, complete all as specified and directed.

S&F vitreous China Squatting pan ‘Orissa’ pattern, size 580 X 440mm, white, with integral foot rests and with ‘P’ or ‘S” trap, (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, etc and including provision of lime concrete bedding and make good the disturbed surface, complete all as specified and directed.

S&F PVC valve less, syphonic action type, 10 Litres capacity flushing cistern, low level, white, with inlet, ball valve, float and handle, including brackets, flush pipe, complete all as specified and directed.

S&F wash basins, vitreous china, white, flat back, size 550 mm X 400 mm with and including cast iron brackets (embedded in wall upto 110 mm depth with and including cement concrete M15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate or fixing on wall with and including rawl plug and screws), 32 mm nominal size, copper alloy, nickel chromium plated finish waste fittings, including painting of fittings and brackets, sealing gap between wall and basin with silicone sealant, cutting and making good the walls wherever required and connecting to supply pipes, waste pipes, waste fittings etc. with silicone sealant complete all as specified and as directed.

S&F 15 mm bore stop valve cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions fancy type, chromium plated ,complete all as specified and directed.

S&F 15 mm bib tap, cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, short body with flange ,screwed for iron pipe or for brass ferrule, complete all as specified and directed

S&F 15 mm bore pillar taps, cast copper alloy, withcapstan heads,chromium plated,screwed down highpressure, with or without lettered 'Hot' or 'Cold' withlong screwed shanks and fly-nuts,screwed for iron pipe and fixed,fancy type suitable for 15 mm bore pipe, complete all as specified and as directed.

S&F flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern,complete all as specified and as directed.

S&F PVC connection 15 mm size with PTMT nuts of length 450mm. complete all as specified and as directed.

S&F 20mm bore for gun metal glove or gate valves with iron wheel head screwed both ends for iron pipe,complete all as specified and as directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F soap dish, vitreous china white, approximate size 160 x 160 x 90mm ,complete all as specified and directed.

S&F PVC (SWR) floor trap 75mm dia of outlet plain with grating including jointing with solvent cement ,complete all as specified and directed.

S&F PVC (SWR) bends any radius of 75 mm bore with access door,complete all as specified and directed.

S&F viterous China urinals, bowl type (back or corner wall type), of size 465 x 355 x 265mm white completeincluding providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement; fixing, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe), complete all as specified and directed.

S&F urinal Spreader of PTMT any colour for fixing with 15 mm dia pipe ,complete all as specified and directed.

Supply, Laying and Testing and labour for reinforced concrete pipes 150mm, class NP2 laid and joinded complete with collar ,complete all as specified and directed.

M&L for concrete bed to drain pipes including packing under , and haunching against the sides of pipes after they are laid and tested in cement concrete (1:3:6) type C2 for 150mm dia pipe complete all as specified and directed.

On site Hume Pipe Septic Tank designed to carry sewage and sullage water, excavation in any type of Soil, PCC 1:4:8 below foundation, vent shaft, connection etc., complete for 10 users.complete all as specified and directed.

Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6 walls of honey combed masonry with top ring of M-25 Concrete including intercepting chamber and screen chamber made of Brick masonry in CM, RCC cover slab in M 25/SFRC cover, interconnecting ppes of RCC/ DWC complete filled with brick bats of size 1.2 m by 1.5 m effective depth complete all as specified and directed.

M&L for 100 mm thick Cement concrete type B-1, 1:2:4 ( 20 mm graded stone aggregate) and finishing the surfaces even and smooth without using extra cement.complete all as specified and directed.

M&L for forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, grade 'A' complete all as specified and directed.

Dismantling wrought Iron or mild steel work of any description not otherwise provided for.complete all as specified and directed.

S&F framed work such as grill gratings etc.. with end of bars shouldered and or riveted, or forged into spikes; framed guard bars; b arred iron door; ladders; frames balusters; walk ways; railings; framedwork of water tanks and similar work conforming to Fe-290. Gde-E-165 ,complete all as specified and directed by engr-in-charge.

S&F wind ties for roof including securing bolts, flat iron fillets (for securing weather boarding with screw bolts and nuts) including all necessary drilling,bolting or riveting, etc and similar work conforming to Fe 290 Grade E-165 including painted with one soap coat of zinc chromate primer paint. (including preparation of surface at contractor's workshop before fabrication) ,complete all as specified and directed by engr-in-charge.

Dismantling of wall or ceilling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, of any thickness including cover fillets ,complete all as specified and directed.

S& F anodised aluminium snap grid (605X605mm ) frame work for false ceiling with all necessary aluminium angle & Tee aeeangement with and incl fixing cleats ,complete all as specified and directed.

M&L for hanger 6mm dia G.I (upto 1200 mm length) adjusted level fixed to roof truss by means of ceilling cleat made out of GI flat 40x3 mm size 60mm long and expansion hold fastener 12.5 mm dia 40 mm long ,complete all as specified and directed.

M&L for providing and fixing 12mm thick designer mineral fiber acoustic ceiling tiles are high-density boards which are two by two feet tiles in size, they are made of mineral fibre, fixed as per manufacture instruction complete all as specified and directed by Enger in Charge.

M&L for PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in roof kerbs or mud stop rounded ,complete all as specified and directed .

Dismantling of Asbestos cement (corrugated, semi corrugated etc) of any thickness including ridges, hips, valleys as in roof coverings complete all as specified and directed.

M&L for pre-painted, galvalume aluminium zinc coating GI based corrugated steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self-tapping screws, complete all as specified and directed.

S&F Pre - Painted galvanized aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in ridges, hips valley gutter etc fixed with self tapping screws complete all as specified and directed.

S&F 1000 litres capacity rotational moulded polyethylene water storage tanks multi layer (cylindrical vertical with closed top with tripal layer) conforming to IS-12701-96 complete including provision of all inlet, outlet, overflow and drain pipe fittings ,complete all as specified and directed.

S&F of high pressure PTMT float valve with epoxy coated alluminium rod and high density polythelene ball screwed for iron pipe 25 mm dia with fly nut complete all as specified and directed.

M&L for 25 mm bore gate valve cast copper alloy screwed down high pressure with clutch handle screwed both ends for Iron pipe, complete all as specified and directed.

S&F 25 mm bore GI Tubing medium grade in Trenches/ Floor/Pillar and connection including fitting like socket /Union/Tee/Reducer Nipple etc complete all as per specified and directed.

Cutting existing steel tubing for alteration or additions (each cut measured) 25 mm bore, complete all as specified and directed.

E/M Portion M&L for point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLS cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLS PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed.

All as per item No 91.00 mentioned here-in-above but One 3 pin 5 Amps socket outlet points on independent board complete all as specified and directed.

All as per item No 91.00 mentioned here-in-above but 5 Amp socket on same board with other switches complete all as specified and directed.

M&L for wiring for socket outlet 3 pin, 15 amps on independent Boards controlled by one, one way switch using 4.0 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 4.0 sqmm nominal cross sectioanl area multistranded copper conductor , PVC insulated unsheathed FRLS cable earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified.

S&F switch piano flush type, single pole , 6 Amps, one way complete all as specified.

S&F switch socket combination, 2 in 1 multipurpose 5 pin , (6 Amps ) complete all as specified.

S&F socket outlets 2 in 1, 3 pin, 5/6 Amps for Same Board flush type 230/240 V complete all as specified and as directed .

S&F switch socket combination 2 in 1 , 6 pin , (16 Amps ) flush type controlled by one switch complete all as specified and directed.

S&F ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified and directed.

S&F stepped type electronic fan regulator flush type 240 Volts ISI marked, complete all as specified and directed.

S&F two single core, 4 sqmm nominal cross sectional area multistranded copper conductor FRLS cable, PVC insulated unsheathed 1100 Volts grade drawing in and including suitable size PVC casing caping (ISI marked), including 4 sqmm nominal cross sectional area multistranded copper conductor FRLS cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified and directed.

S&F in repair submain two single core, 4 sqmm nominal cross sectional area multistranded copper conductor FRLS cable, PVC insulated unsheathed 1100 Volts grade drawing in and including suitable size PVC concealed conduit (ISI marked) including 4 sqmm nominal cross sectional area multistranded copper conductor FRLS cable, PVC insulated unsheathed 1100 Volts grade earth wire, complete all as specified and directed.

S&F in repair submain two single core ,6 sqmm nominal cross sectional area multistranded copper conductor FRLS cable, PVC insulated unsheathed 1100 Volts grade drawing in and including nd including suitable size PVC concealed conduit (ISI marked) including 6 sqmm nominal cross sectional area multistranded copper conductor FRLS cable, PVC insulated unsheathed 1100 Volts grade earth wire , complete all as specified and directed.

S&F in repair recessed mounted 2' x 2 ' LED luminaire 42 watts for grid ceiling minimumm lumen output 100 lumen/Watt, pre-treated CRCA frame powder coated with diffused Profied including necessary connection ,complete all as specified and directed.

S&F 18W LED light fitting wall mounted batten 4'ft, extruded polycarbonate, environmental friendly, heat sink provided for efficient heat dissipation and integrated electtronic driver for 18 Watt, 6000K including necessary connection complete all as specified and directed.

S&F in repair 18 W recess mounted round LED downlight, 6500K, aesthetically designed auminium die-cast enclousers, with seperate replaceable constant current driver 18 watts for grid ceiling ,including necessary connection complete all as specified and directed.

S&F security light fittings 25 watts, minimumm lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65 including necessary connection complete suitable for pole dia 25mm complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size complete all as specified and directed.

S&F in repair security light fittings 60 watts, minimumm lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65 including necessary connection complete suitable for pole dia 25mm complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size complete all as directed.

S&F epoxy powder coated sheet metal enclosure for DBs, double door, Triple pole and neutral 415 V, 4 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact , complete all as specified and directed.

S&F in repairs epoxy powder coated sheet metal enclosure for DBs, double door , Triple pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact , complete all as specified and directed.

S&F in repairs epoxy powder coated sheet metal enclosure for DBs, double door , Vertical Triple pole and neutral 415 V, 12 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact , complete all as specified and directed.

S&F MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Voltsand to be housed in DBs including necessry connection complete all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

S&F MCB SPN, 6 to 32 Amps, 'C' series 10kA, 240 Voltsand to be housed in DBs including necessry connection complete all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

S&F MCB TPN 40 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection complete all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

S&F in repairs MCB TPN 63 Amps, 'C' series 10kA, 415 Volts and to be housed in DBs complete including necessry connection complete all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

S&F of MCCB 4 pole, 3 phase, 415 volt of capacity 125 Amp, 25 KA fixed with proper thimbles , copper reducer ,thermal and fixed magnetic setting including necessry connection, complete all as specified and directed.

M&L for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 40 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate 3 of SSR Part I complete all as specified and directed and testing on completion. Note :- (i) If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department. (ii) Testing to be carried out by the contractor in presence of Engr- in- Charge , entered in the eath testing register, prepared and to be maintained by the contractor & submited to Concerned JE E/M. (iii) T&P and testing instrument(Meger) to be provided by the contractor at own cost. Note :- If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department.

M&L for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using galvanised iron strip 32×6mm as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 40 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion. Note :- (i) If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department. (ii) Testing to be carried out by the contractor in presence of Engr- in- Charge , entered in the eath testing register, prepared and to be maintained by the contractor & submited to Concerned JE E/M. (iii) T&P and testing instrument(Meger) to be provided by the contractor at own cost. Note :- If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department.

S&F ceiling fan 1200mm size, star 5 rated, ISI mark, 240V, 50 Hz complete all as specified and directed.

S&F metallic exhaust ventilation fan of sweep 300 mm sweep, 230volt AC complete with louver and all asssesories including cutting hole of suitable size, making good surface by doing plaster and applying two coat of distemper complete with fixing connected with rwin core twisted flexible copper conductor (23/0.0076) of size complete all as specified and directed. (Note:- Cost of cutting and making hole for fixing exhaust fan shall be deemed to included in quoated rates).

Supply, laying / fixing / connecting, testing and commissioning of LT under ground cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cable (heavy duty) with multistranded aluminium conductor,1100 Volts cross sectional area 50Sqmm x 3.5 core in trenches/on wall/poles laid in ducts/inside protection pipe of the following cross sectional area including cable glands,lugs and suitable size of MS saddle clips (where ever cable laid in ceilings / walls without cable duct) complete all as specified and as directed Note : (i) Earth work in excavation, sand cushioning, cable cover, cable protection, GI pipe shall be measured and paid separately under relevant item. (ii) Cable Route Indicator made of metal of height 300mm above GL duly written ''LT CABLE'' to be fixed on every 30 mtr distance with pcc (1:3:6), 150 mm below the GL ,cost of indicator and pcc to be considered in this item rate.

All as per item No 121.00 mentioned here-in-above but of size 16Sqmm x 4 Core complete all as specified and directed.

Supply and lay for dry river sand filling for cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and directed. (Note : Punned thickness shall be measured). Note :- Punned thickness 18 cm shall only be considered for payment.

M&L for fly ash bricks locally available of size 23 x 11 x 7 cm laid dry width wise across the line of cable in trenches for protection of UG cable complete all as specified and directed.

M&L for parellel boring under roads in conventional method without disturbing the top surface of road for passing of cable protection pipe etc complete all as specified and directed.

Supply, fixing and laying 50mm bore, steel tubings, galvanised, light grade with all fitting laid across road, in trenches or across PCC drain or along electric pole or floor/wall etc for protection of cable complete all as specified and as directed.

S&F in repair Air termination, single pointed. Aluminium rod 12mm dia and 300mm long , fixing over 1.5mm dai GI light grade pipe of ht 1.5 m with nut and bolt after taking down exisitng one ,complete all as specified and directed.

S&F in repair Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw complete all as specified and directed.

M&L for earth continuity conductor of 32 x 6mm galvanised iron strip fixed to wall on batten or recess or chases or burried in ground or drawn in conduit/pipe or any other indicated situation for loop earthing etc,including taking out old unserviceable iron earth strip complete all as specified and directed.

S&F earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 25x3mm dia aluminium strip, including taking down exisitng one etc, complete all as specified and directed.

S&F 40 mm bore galvanised steel tubes light grade, with all fittings and fixed complete to walls and ceiling or laid in floors/ PCC Foundation pillar ,complete all as specified and directed.

S&F in repair low density polythelene pipes (LDPE) 40mm dia for insulation of earth strip from building at entry points ,complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (using 20 mm graded stone agregate) as in coping with MS ferule for mouting GI pipe 25 mm dia etc, complete all as specified and directed.

KAZI SAHABUL ALAM

MS ROYAL CONSTRUCTION INDEX NO 158 2010 BKP