Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.2 LAccepted-AOC 30 KM GANDHI NAGAR CAMPBELL BAY | CAMPBELL BAY | NICOBAR | ANDAMAN AND NICOBAR ISLANDS | 744301 | L1 | Accepted-AOC ACCEPTED BEING L1 BIDDER | |
| 2 | L2₹35.7 L+₹53,484.45 (1.52%)Rejected-AOC | L2 | Rejected-AOC REJECTED FOR NOT BEING L1 BIDDER | |
| 3 | L3₹39.2 L+₹4.1 L (11.6%)Rejected-AOC | L3 | Rejected-AOC REJECTED FOR NOT BEING L1 BIDDER | |
| 4 | L4₹39.7 L+₹4.5 L (12.8%)Rejected-AOC 06 GOVIND NAGAR PANCHAYAT USR TRANSPORT CAMPBELL BAY OLD FISHERMAN COLONY CAMPBELL BAY GREAT NICOBAR ISLANDS | L4 | Rejected-AOC REJECTED FOR NOT BEING L1 BIDDER | |
| 5 | L5₹39.9 L+₹4.8 L (13.6%)Rejected-AOC | L5 | Rejected-AOC REJECTED FOR NOT BEING L1 BIDDER |
Tender Value
₹42 L
EMD Value
₹84,000
Closing Date
19 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE
GE (I) CAMPBELL BAY, ARMY LAND, CAMPBELL BAY, GREAT NICOBAR-744302
PROVN OF FOL STORAGE FACILITIES FOR NCN CENTRE AT INS BAAZ UNDER GE(I) CAMPBELL BAY
2023_MES_614895_1
8084/E8
Open Tender
Civil Works
Item Rate
180 days
CAMPBELL BAY
PLEASE REFER TENDER DOCUMENT AND NIT
8 documents required · 8 mandatory
₹500
GE (I) CAMPBELL BAY
₹84,000
Yes
7 Dec 2023
22 Aug 2023
21 Sept 2023
22 Aug 2023
19 Sept 2023
5 Sept 2023
Amount
B/R PORTION Surface excavation n. exc 30cm deep and averaging 15cm deep and getting out in any type of soil all as specified and as directed.
Excavation in trenches n.exc 1.5m in depth and getting out in any type of soil including cutting of roots/ branches below ground level whereever required complete all as specified and as directed.
Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth and getting out in hard/dense soil for foundation of poles, structures, stay rods, laying of underground cable etc complete all as specified and as directed.
Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc 25cm thick in any type of soil complete all as specified and as directed.
Removing excavated/ demolished material to a distance n.exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified and as directed.
M & L for PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in foundation and mass concrete for angle iron post complete all as specified and as directed.
M & L for RCC (Design Mix M30) (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.
M & L for RCC (Design Mix M30) (using 20mm graded stone aggregate) as in chajjas, canopies, and in shelves and the like complete all as specified and as directed.
M & L for RCC (Design Mix M30) (using 20mm graded stone aggregate) as in roof beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.
M & L for RCC (Design Mix M30) (using 20mm graded stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and as directed.
M & L for use and waste of timber as in formwork flat to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed.
M & L for use and waste of timber as in formwork flat to soffits of Chajjas and similar work; not exceeding 200mm thick complete all as specified and as directed.
M & L for use and waste of timber as in formwork flat to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed.
M & L for use and waste of timber as in formwork in square, rectangular or polygonal to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed.
M & L mild steel TMT bars 10 mm dia and over, cut to length bent to shape required incl cranking, bending, spirally hooping for columns and binding with MS wire (annealed) not less than 0.90mm dia wire etc complete all as specified and as directed.
Description all as per item No 15 above but 8 mm dia mild steel TMT bars as in stirrups complete all as specified and as directed.
M & L for providing precast cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in landings, cover slabs (for man holes etc.), wash basin support slabs, chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain face complete all as specified and as directed. Note : Reinforcement shall be measured and paid seperately.
M & L precast cement concrete (1:3:6) type C-1 (using 20 mm graded stone aggregate) block masonry with solid blocks, exc. 10 cm in width and setting in CM (1:6) complete all as specified and as directed.
M & L hard core of broken stone of gauge n.exc 63mm deposited spread and leveled in layers , water and rammed true surface in plinth protection/ hard standing complete all as specified and as directed.
M & L for providing 100mm thick PCC (1:4:8) type D-2, (using 40mm graded stone aggregate) laid in floor sub base cement concrete surface even and smooth without using extra cement all as specified and as directed.
M & L for providing 40 mm thick cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) laid in base, cement concrete surface even and smooth without using extra cement all as specified and as directed.
M & L for machine cut kota stone slab flooring, 20-25mm thick over cement screed base laid and jointed with grey cement slurry miceed with pigment to match the shade of the slab including rubbing and polishing complete, in floors etc, laid over and including 20mm thick screed bed or bedding layer of CM (1:6) for laying floor finishes all as specified and as directed.
Description all as per item No.22 above but as in skirting/ dado/risers in steps set and jointed in neat cement slurry and pointed in white/coloured cement to match the coloured tiles, laid over and including screed bed/ dubbing coat 15mm thick in CM (1:4) scoured for fixing tiles /stone slabs etc to complete all as specified and as directed.
M & L rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM (1:6) in walls, finished even and smooth (with out using extra cement) complete all as specified and as directed.
M & L for 15 mm thick rendering in CM (1:4) mixed with WPC as per manufacturer's instruction on external surfaces surfaces finished even and smooth without using extra cement all as specified and as directed. Note: WPC shall be measured and paid seperately under relevant item
Supply only integral water proofing compound all as specified and as directed.
M & L for applying two coats of oil bound distemper on surfaces of walls over a coat of chalk whiting primer including preparation of surfaces complete all as specified and as directed.
M & L for preparing of new surfaces and applying two coats of anti-fungal exterior emulsion paint over a coat of anti fungal primer on external surfaces of walls and ceilings/ chajjas projections complete all as specified & as directed.
S & F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. all as specified and directed.
M & L for Steel rolling shutters, thickness of laths 1.25mm with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and applying one shop coat of primer erected in position as indicated, complete: push pull or manual type complete all as specified and as directed.
M & L for Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed.
M & L for Ball bearing for rolling shutters complete all as specified and as directed.
S & F anodised aluminium window and ventilator shutters, side hung type without sash bars aluminium section weighing 0.55 Kg/Rm including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1No) hinges type B-21 100mm long (2No) suitable handle (1No) complete all as specified and as directed.
S & F 5.5mm thick plain sheet glass glazing any size with rubber packing whereever required complete all as specified and as directed.
S & F anodised aluminium grill any size 10 mm thick complete with frame or channel section including all necessary fittings complete all as specified and as directed.
S & F steel work as in tubular trusses including special shaped washers etc, complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St 240 complete all as specified and as directed.
S & F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S & F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
M & L for preparation of new /previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.
M & L for providing 75mm thick PCC (1:3:6) type C-2, (using 40mm graded stone aggregate) laid in plinth protection/ floor sub base cement concrete surface even and smooth without using extra cement all as specified and as directed.
M & L for providing cement concrete (1:2:4) type B-0 (using 12.50mm graded stone aggregate), as in coping including necessary form work all as specified and as directed.
M & L for PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) asin surface channels and drains complete all as specified and as directed.
M & L for extra for forming fair finished drain or channel of 45 cm inner girth in cement concrete using extra cement including forms moulds etc all as specified and as directed.
M & L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement all as specified and as directed.
M & L for providing 100 mm thick cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) laid in base, cement concrete surface even and smooth without using extra cement all as specified and as directed.
M & L for forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade 'B' complete all as specified and as directed.
M & L for colour chequered cement concrete tiles of size 200mm x 200mm x 25 mm thick with grey cement and no pigment set jointed and pointed in neat cement slurry colour to match in floors, laid over and including 20 mm thick screed bed or bedding layer in CM 1:6 for laying of floor finish complete all as specified and as directed
E/M PORTION M & L for point wiring complete with 1.5 Sqmm PVC insulated unsheathed FRLSH single core multistranded copper conductor 1100 V grade drawn through in and including 20 mm dia in stove enamalled steel conduit on wall/ceiling and terminated to MS box of 1.6 mm thick and flame proof rotary switch etc including 1.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly for light/ fan point three pin 5 Amp complete for One light point controlled by one way 5 Amps swtich all as specified and directed by Engr-in-Charge. Note: Rotary switch shall be measured and paid separately under relevant item.
S & F flame flame proof weather proof rotary switch rated minimum 6 Amps SP with separate terminal chamber made in die cast Aluminium Alloy LM6 suitable for IP 65 with all stainless steel hardware and painted with epoxy based powder coated paint having temp class T6 inclduing suitable size of cable glands & necessary items for fixing arrangement all as specified and as directed.
M & L for sub main wiring complete with 2 runs of 6 Sqmm PVC insulated heavy duty and unsheathed cable with multistranded copper conductor and drawing through in and including 20 mm dia in stove enamalled steel conduit on wall/ceiling and connecting terminal ends to plug sockets and DB's including provision of 1 run of 6 Sqmm insulated copper cable for earth continuity conductor and connecting to earth dolly complete all as specified and directed by Engr-in-Charge. Note : (i) 3 Runs of 6 Sqmm cable shall be measured as one unit length. (ii) The wiring shall be done in proper color coding using red, yellow, blue for phases, black for neutral and green for earth.
S & F of flame flame proof weather proof 4-way , MCB distribution having prewiring connections, common neutral link, common earth link, bus bar of capacity 200 Amps with separate terminal chamber made in die cast Aluminium Alloy LM6 suitable for IP 65 with all stainless steel hardware and painted with epoxy based powder coated paint having temp class T6 inclduing suitable size of cable glands & necessary items for fixing arrangement all as specified and as directed. Make : L&T/ Legrand/ Hager/ Siemens/ ABB/ Schneider Electric
S & F MCB SP, 230Volts, 50Hz, current rating 6-32 Amps including necessary items for fixing arrangement all as specified and as directed. Make : L&T/ Legrand/ Hager/ Siemens/ ABB/ Schneider Electric
S & F MCB SPN 230 volts, 50 Hz current rating 20-32 Amps inclduing necessary items for fixing arrangement all as specified and as directed. Make : L&T/ Legrand/ Hager/ Siemens/ ABB/ Schneider Electric
S & F flame proof LED tube light 1x18w, 4ft, 230 volts, minimum 90 lumens per watt, 50Hz with separate terminal chamber made in die cast Aluminium Alloy LM6 suitable for IP 65, with all stainless steel hardware and painted with epoxy based powder coated paint having temp class T6 inclduing suitable size of cable glands & necessary items for fixing arrangement all as specified and as directed. Make : M/s Sudhir/ M/s Flexipro Electricals Nasik/ M/s Shyam Switchgears Mumbai/ M/s Bajaj/ M/s Crompton/ M/s Batiga
S & F flame proof junction box with terminal block rated 32 Amps with separate terminal chamber made in die cast Aluminium Alloy LM6 suitable for IP65, with all stainless steel hardware and painted with epoxy based powder coated paint having temp class T6 inclduing suitable size of cable glands & necessary items for fixing arrangement all as specified and as directed. Make : Sintex/ Hensel/ OBO
M & L for earthing with galvanised steel earth plate electrode 600mm x 600mm x 6mm thick burried earth pit not less than 2.25m depth below normal ground level with to edge of the plate vertically to depth of not less than 1.5 m below ground level connected to & including galvanised earth wire size 4 mm dia by mean of GI bolts & nuts etc with provision of charcoal and salt etc all as per electrical plate No-3 of SSR Part-I including RCC cover and MS angle iron frame, watering with GI pipe 20 mm dia (medium grade) & MS funnel, concrete pit including excavation and earthwork and testing on completion etc. complete all as specified and directed by Engineer-in-charge. Note : (i) Refilling of the earth pit shall be carried out with black cotton soil. (ii) GI wire 4mm dia & GI protection pipe upto 7.5 m length & GI pipe for watering shall be measured under this item. (iii) On testing after completion, if the desired earth resistance is not obtained the earthing will be redone to the entire satisfaction of Engr-in-Charge at no extra cost (iv) Earth work is deemed to be included in the quoted rate.
Supply and lay GI tubing 50 mm dia, light grade for cable protection at road crossing / on poles and tubing sealed at both ends after laying the cables complete all as specified and as directed.
Supply and laying XLPE insulated, armoured, heavy duty, electric cable of size 2 core x 16 Sqmm with stranded aluminium conductors, 1100 volts grade, laid in tranches /fixing on wall/ poles or passing through pipe, including connecting up with suitable glands, lugs, nuts and bolts wherever required and testing on completion, with GI protections pipes, complete all as specified and as directed.
S & F of HDPE double wall corrugated pipe confirming to IS -14930 Part with IP protection IP-67 having inner dia 50mm complete all as specified and as directed. Make : Gemini/ Telerex/ Prince
M & L cutting of road, hard standing made of concrete or premix carpet, WBM, soiling and morrum filling for laying of cable pipe all as directed and making good the road/hard standing by using all old/new materials and with PCC (1:2:4) etc, required to match with the existing surface complete all as specified and directed.
M/S Sudhir Kumar Gupta
M/S G S GREWAL
USR Transport
KCM BUILDERS & CONSTRUCTIONS (INDIA) PVT.LTD
M/s Gurunath Construction
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .