GE(S) BTD 03 OF 2024-25 PROVISION OF CERTAIN SPECIAL REPAIR AND MINOR WORKS UNDER AGE BR II AND AGE EM IV UNDER GE (SOUTH) BATHINDA AT BATHINDA MILITARY STATION(2ND CALL)

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4 Sqm each complete all as specified and as directed.

Pressed steel door frame of size 125x60mm, double rebated for doors made out of 1.25mm thick mild steel sheet including necessary fixing lugs, hinges lock strike plate etc, complete all as specified and directed.

Pressed steel door frame of size 105x60mm, double rebated for doors made out of 1.25mm thick mild steel sheet including necessary fixing lugs, hinges lock strike plate etc, complete all as specified and directed.

M & L for PCC 1:3:6 type C1 (20mm graded crushed stone aggregates) as in filling back of pressed steel door frames/chowkats and for fixing hold fasts, etc., complete all as specified and directed.

S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35mm thick factory made panelled shutter (two panel) plain framed with lock rail and panel of 12mm thick plywood commercial type and chemically pressure treated of second class hard wood rails and styles and the size of rail and style as per IS-1003(Part I) complete all as specified and directed.

Glazed and Skelton shutters using 2nd class hard wood 35mm thick open rebated and prepare to receive glass or gauge etc edges of framing plain and chamfered or fitted cut or mitered beads for securing glass size of member of shutter as specified in SSR Part-I section 8, clause 8.23(a) and divided in square complete all as specified and directed.

Supply only mild steel Butt Hinges, 100 mm size, medium weight, cold rolled fixed with complete all as specified and directed.

S&F150mm aluminium handles, oval type, stove enemeled black complete all as specified and directed.

S&F 300mm long aluminium sliding doors bolts, plate type, stove enameled black bolts and nuts, four on bolt plate and two on staple complete all as specified and directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F 3.0mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.50 Sqm in each pane complete all as specified and directed.

Material and Labour for painting to new wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of pink primer including preparation of surfaces complete all as specified and as directed.

M&L for Preparation of old or previously untreated surfaces of steel and iron surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats synthetic enamel paint over a coat of red oxide primer complete all as specified and as direcetd.

Taking down chowkhats or frame with shutter (without taking off shutters from the frames) not exceeding 1.5 Sqm each and removal from site complete all as specified and as directed.

Factory made steel window box type using ERW hollow 'P' section comprising double frame for and including gauged and glazed Skeleton shutter jointed internally with flat iron 40x4mm complete including grill of 8mm square bars, fixed horizontally @ 10cm c/c, hinges, handle, tower bolts, stops, lugs etc. complete all as specified and directed.

S&F Solid PVC Door Frame as in bathroom, toilet, cupboard and kitchen cabinate of size 50mm x 47mm made out of 5mm prelaminated PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

Factory Made Solid PVC Moulded Door Shutter as in bathroom, toilet, cupboard and kitchen cabinate,(With particle board) 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site all as per instruction and drawing shown for item No 8080 of SSR Part II on Sl Page No 156. complete all as specified and as directed.

Supply and fixing extruded aluminium anodised 100mm long butt hinges with galvanised mild steel screws complete all as specified and as directed.

S&F aluminium anodised barrel tower bolts of extruded section, 150 mm long (ISI marked) complete all as specified and as directed.

S&F aluminium anodised handles, 125 mm long, cast type, (ISI marked) complete all as specified and as directed.

S&F aluminium anodised barrel tower bolts of extruded section, 150 mm long (ISI marked) complete all as specified and as directed

Powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

All as per Srl item No 24 above but ventilators top hung complete all as specified and directed.

Powder coated Anodised aluminium window and ventilator shutters,glazed/guazed side/top hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

S & F 4.0mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

S & F in 3.0mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.50 Sqm in each pane, including Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L for 25mm dia fancy type PVC coated on MS pipe coloured curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing PVC conduit pipes with accessories complete all as specified and directed.

Demolition of brick work built in cement mortar including all quions, arches , pillars etc. complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks, straight or curved on plan exc 6 M means radius built in CM (1:4) using old size bricks complete all as specified and as directed.

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:4 but except bricks (old serviceable bricks to be used) complete all as specified and directed. Note : The rate includes for cleaning of old bricks.

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specied and directed.

Material and labour for 15mm thick rendering in CM (1:4) on fair faces of brick work or concrete surfaces and finishing even & smooth but without using extra cement & with using integral water proofing compound complete all as specified and directed.

Material and labour for 15mm thick rendering in CM (1:6) on internal surfaces of brick work or concrete surfaces and finishing even & smooth but without using extra cement including water proofing compound as per manufacture's instruction complete all as specified and directed.

Material and labour for applying two coats of cement base paint over a coat of primer on newly plastered wall surfaces including cornices & pillasters etc as per manufacturer's specifications & instructions including preparation of surface, complete all as specified and as directed.

Supply only intergral water proofing compound complete all as specified and directed.

Material and labour for applying two coats of cement base paint over a coat of primer on old plastered wall surfaces including cornices & pillasters etc as per manufacturer's specifications & instructions including preparation of surface, complete all as specified and as directed.

Material and labour for rendering 15 mm thick in cement mortar in (1:6) on other then fair faces of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified and directed.

Material and labour for rendering 5 mm thick in cement mortar in (1:3) on ceiling and finishing the surface even & smooth without using extra cement complete all as specified and directed.

Preparation of new plastered or unplastered surfaces of walls, applying 3mm thick wall care putty on wall and two coats of distemper oil emulsion over one coat of priming plastered surfaces with alkali resistant priming paint complete all as specified and as directed.

M & L for preparation of new plastered surafaces of walls and applying two coats of oil bound distemper over a coat of suitable primer complete all as per manufacturer instructions and all as specified and directred.

M & L for preparation of old plastered surafaces of walls and applying two coats of oil bound distemper over a coat of suitable primer complete all as per manufacturer instructions and all as specified and directred.

Material and labour for applying three coats of white wash on newly plastered or unplastered ceiling surfaces including preperation of surfaces, complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

Preparation of old plastered or unplastered old decorated surfaces of walls by brooming down or steel wire brushing, scrapping down smake soot, moulds, mass and efflorescent salts and trading oil and greasy spouts and applying one coat of cement base paint on walls including cornices etc complete all as specified and directed.

Demolition of cement concrete (re-inforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed .

M&L for RCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) for slabs supported on walls, shelves, beams and columns, lintels, fins, facia and Chajjas in double story bldg including scafolding for repair etc and the like, including form work complete all as specified and as directed .

M&L for TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed .

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including backing coat of 10 mm in cement mortar 1:4 complete all as specified and directed.

Non skid floor tiles, colored, of size 400x400x7mm thick or of size as approved as in floors set and jointed in neat cement slurry and pointed in white cement with pigments to match over and including the provision of 10 mm thick bedding layer in cm 1:6 complete all as specified and directed.

Description all as per Ser item No 51 above but on vertical surfaces as in skirtings etc on 10mm thick back coat in CM 1:4, complete all as specified and directed.

Glazed ceramic colored tiles of size 300x450x6mm thick or of size approved in dado, set and jointed in neat cement on and including the provision of 10mm thick rendering in CM 1:4 complete all as specified and directed.

Material and labour for machine cut kota stone slab flooring 20-25mm thick over 15mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Material and labour 75mm thick, cement concrete 1:3:6, type C2 using 40mm graded crushed stone aggregate as in floors, plinth protection, paths, etc and finishing top surfaces even and smooth without using extra cement complete all as specified and directed. complete all as specified and as direcetd.

S&F 15 mm bore long Body with wall flanges Chromium plated Bib taps (Fancy type) cast copper alloy with crutch or butterfly handle, screwed down , screwed for iron pipe complete all as specified and as directed.

S&F in repair stop valve for 15 mm bore dia of pipe, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for brass ferrule complete all as specified and directed .

Supply and fix in replacement; 15 mm bore stop valve (or angle valve) fancy ,(concealed type) chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends complete all as specified and directed.

Supply and fix in repairs; vitreous china wash down water closet pan (pedestal pattern), white, including plastic seat cover closed pattern including bolts, flush pipe of polyethylene of low or high density PVC 32mm dia anti-syphonage pipe etc and connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe etc complete all as specified and as directe

S&F in repair vitreous china (white) squatting pan 'Orissa' pattern, white, size 580 x 440x260 mm, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flush pipe, anti-syphonic pipe etc including making good to floor and including trap set, in and including lime concrete complete all as specified and directed.

Supply and fix in repair; 10 litres capacity PVC valve less symphonic action type, flushing cistern, low level, white with inlet, ball valve, PVC flush pipe, float and handle including brackets complete all as specified and directed.

Supply and fix in repairs Toilet paper holder of of vitreous china fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed

S&F Vitreous China Urinal in repair bowl type, white of size 465 mm x 355 mm x 265 mm (excluding flushing cistern, flush pipe but including waste pipe , grating and union for discharge pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws or brackets, pointing around urinal back in cement etc. complete all as specified and as directed by the Engineer-in-Charge.

S & F in repairs brass chromium plated tubular towel rail, 20mm dia, D type 60cm long between flanges all as specified

S & F in repairs Jet spray, CP, brass body with wall hook and 1 mtr SS pipe complete all as specified

S&F CP soap tray 100 mm x100mm x6mm fixed to walls with rubber plugs complete all as specified and directed.

S&F 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.

Supply and fix in repair; vitreous china wash hand basin, white, flat back size 550mmx400mm including cast iron or mild steel brackets including cutting for and pinning in brackets complete all as specified and as directed.

Supplied only waste coupling 32 mm dia PTMT complete all as specified and directed.

Supply and fix in replacement; 125mm size brass chromioum plated shower rose with angular arm with swivel jiont complete all as specified and directed.

Supply and fix single lever wash basin Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified.

Supply and fix in replacement; PVC connection 15mm dia and 60cm long with two Nos of brass check nuts and washers complete all as specified and directed.

S & F in 'repair' CP grating (with or without waste hole), 125 mm size, fixed on floor/nahani traps etc complete all as specified

S&F Soap dish, any type, fixed to plugs with chromium plated brass screws

Dismantling and disconnecting of existing CI soil vent pipe 100 mm bore fixed to wall,laid in trenches incl all fittings & accessories complete all as specified and directed.

S & F cast iron soil waste and vent (Spun pipe, bore of pipe 100mm) pipe with or without ears fixed with chemical cement joints fixed in walls complete all as specified and directed.

S & F Cast iron soil, waste and vent (Spun pipe, bore of pipe 100mm) pipes with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed.

Bends (100mm bore radius), diminishing pieces or tapers (larger bore measured)

S&F Branch pieces,100mm bore single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches

Dismantling and disconnecting of existing CI soil vent pipe 75 mm bore fixed to wall,laid in trenches incl all fittings & accessories complete all as specified and directed.

S & F cast iron soil waste and vent spun pipe 75mm bore with or without ears fixed with chemical cement joints l fixed in walls complete all as specified and directed.

S & F Cast iron soil, waste and vent spun pipes 75mm bore with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed.

Bends (75mm bore radius), diminishing pieces or tapers (larger bore measured)

S&F Branch pieces,75mm bore single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches

S & F cast iron sand soil waste and vent pipe 50mm bore with or without ears fixed with chemical cement joints fixed in walls complete all as specified and directed.

S & F Cast iron cowls 100mm bore complete all as specified and directed.

S&F 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

M&L for 100MM bore Cast iron floor trap/P Trap /Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed by the Engineer-in-Charge.

M&L for 75MM bore Cast iron floor trap/Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed by the Engineer-in-Charge.

Salt-glazed stoneware gully traps,(Size of gully traps in 150mm x 150 mm) square or round mouthed, tvpe 'P' complete all as specified and as directed.

S & F CI fitting (ISI marked) of 100mm/75mm bvore any type and descrptions(radius angle or tapered) Teepieces, 'Y' junctions double branch cross (all socket & spigot) including making good and connection to waste pipe complete all as specified and as directed .

M&L for providing Plain cement concrete bed for 150 mm bore drain pipes in 1:4:8 type D 2 using 40 mm graded stone aggregate including packing under and haunching against the sides of pipes of after they are laid and tested complete all as specified and as directed by the Engineer-in-Charge.

M&L for Salt-glazed stoneware drain pipes laid in trenches and jointed (Internal diameter of pipe 150 mm) as specified complete with collars as specified

Providing precast cement concrete1:2:4 type B-1 using 20mm graded stone aggregate as in cover slabs (for man holes etc.) set in CM 1:6. including all necessary form work.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms , moulds, mitred/stopped ends etc.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out loose and soft soil

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point

Taking down or up 15 mm bore galvanised iron tubing/PL-AL-PE pipes and connection including cleaning for refixing or removal complete all as specified and directed.

Supply and fixing GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and directed .

Refixing old GI tubing 15 mm bore pipe and connections in new or old position as on walls ceiling floors etc all as specified

Taking down or up 20 mm bore galvanised iron tubing/PL-AL-PE pipes and connection including cleaning for refixing or removal complete all as specified and directed.

Supply and fixing GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and directed .

Refixing old GI tubing 20 mm bore pipe and connections in new or old position as on walls ceiling floors etc all as specified

Taking down or up 25 or 32mm bore galvanised iron tubing/PL-AL-PE pipes and connection including cleaning for refixing or removal complete all as specified and directed.

Refixing old GI tubing 25 or 32mmmm bore pipe and connections in new or old position as on walls ceiling floors etc all as specified

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed .

Dismantling water tanks and removing to store (exc 250 & n.exc 500 ltr).

S&F Rotational moulded polyethylene 500 Ltr capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed.

Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided.

M&L rendering 15 mm thick wall plaster in CM 1:3 mixed with water proofing compound complete all as specified and directed.

Supply only Liquid water proofing compound

M&L for applying two coats of Dr Fixit pidecrete URP in sunken floor portion of toilets & bathroom, chajja, staircase. etc by using URP + cement in the proportion of (1:1.5) and making pedicrete solution and applying by brush. Etc all as specified and as directed by Engineer-in-charge

M&L for PCC 1:5:10, type E-2 as in filling of sunken floors etc.

Providing and erecting adjustable ( jack type ) steel props (up to full height, braced at centre, resting on wedge and block to support the structure provisionally during repair work and maintaining them in position till required i.e chipping of unsound concrete/ demolition & complete treatment complete and as directed by Engr-in-Charge.

Chipping of unsound weak and cracked concrete/ cover of reinforcement over RCC member (ceiling beam, columns etc) or as per site requirement upto minimum half depth of bars by chiseling and disposal of rubbish form site to a distance not exc 250 mtr incl all required scaffolding/ ladders complete all as specified.

Cleaning of existing reinforcement with wire brush/ rotary wire brush to make surface free from rust scales, loose material, diet etc, complete and proving applying two coats (0.4 Kg/Sqm) of alkline rust converting primer Sika Rust off-100 or equivalent in Fosrock/ Pidilite on the existing rebar and allowing it to react with rust for 6 hrs form corrosion resistant, insoluable and adherant protective layer, including cleaning the reinforcement, wire brushing to remove the rust spalls with time interval of 1 hour between the coats incl all required scaffolding / ladders complete all as specified as per manufacturer's instruction and as directed. Note:- Girth of RCC member shall be measured.

Providing and application of zinc rich epoxy anti-corrosive protective coating of sika friazinc (R) or equivalent for rebar corrosion protection system in 2 coats (of 0.4 kg/Sqm approx) complete all as specified and directed. The product should confirm carbonation resistance of 2mm and bond strength > 1N/Sqmm according to ASTM C-882-78 incl all required scaffolding/ ladders complete all as specified as per manufacturer's instruction and as directed.

Providing, mixing & applying two components Epoxy resin concrete Bonding coat on prepared RCC surfaces as per manufacturer specification with Sikadur(R)-32 LP or equivalent in consumption of 0.4Kg /m2. The product should comply with ASTM C-881 Type II Grade 2 Class B+C and bond strength should be 10 MPa, including all required scaffolding/ ladders complete all as specified as per manufacturer's instruction and as directed.

Rebuilding the section of damaged RCC elements to its original size or as per consultants recommendations in thickness upto 20 mm in layer of 10 mm each by providing and applying with pre-batched, one component fiber reinforced cementations patch repair mortar Sika(R) Mono Top (R) -122 F or equivalent having compressive strength >= 50 N/Sqmm (28 days) according to ASTM C 109 : Flexural strength >= 50 N /Sqmm (7 days) according to ASTM C 293-79, including all required scaffolding/ ladders complete all as specified as per manufacturer's instructions and directed.

All as per BOQ Srl item No 123 here-in-above but for each additional 10mm uniform thickness for subsequent layers.

Providing & fixing 10mm dia & over rebar of required length & diameter with Sika Anchor Fix(R)-3+/Mungo/Fischer FISV 390/ Hilti RE-500 Epoxy resin where ever required in RCC members including power drilling, cleaning of holes, then rebars should be inserted in holes that should be filled with epoxy to ensure the nond as per manufacture recommendation complete as per site requirement including all required scaffolding / ladders complete all as specified as per manufacturer's instructions and directed.

Demolition Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets.

Anodised aluminium snap grid (Size 605mm x 605mm)frame work for false ceiling all as specified complete all as specified and as direcetd.

M&L 12mm thick perforted particle board/ tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed with nails to timber framework or with staples on snap grid, fixed in existing ceiling flat or sloping complete all as specified and directed

Dismantling of AC sheets (corrugated, semi corrugated etc) sheets in roof covering including ridges all as directed.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I..1161- 1979 grade St.-240 Fe 410-W (Gde-E- 250) quality-A complete all as specified and as direcetd.

M&L painting with synthetic enamel paint two coats including redoxide and preparing the new steel surfaces of any description over 10cm in width or girth.

Material and labour for cement concrete (1:2:4) type B-1, using 20 mm graded stone aggregates as in bands, bedding, benching of manholes, coping, surface channel, roof kerbs or mud stops, rounded or chamfered on edges etc including necessary form work complete all as specified and as directed.

S&F mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, length of bolt 300 mm.

S&F mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed, length of bolt 200mm.

S & F 150 mm mild steel pressed handles, oval type, stove enamelled black.

M&L for 15 mm thick screed bed or bedding layer in cement mortar (1:3) on roof surfaces parapet or vertical beam surface (horizental or vertical) finishing the surfaces even and fair complete all as specified. (Note :- Course sand (Toka sand) shall only be used in screed bed/plastering.)

M & L for cleaning of old Roof top/ concrete surfaces incl uprooting al grass/plants etc& applied a coat of bituminous primer over cleaned surface @ 0.30 ltr/Sqm followed by APP based ploymeric membrane 3mm thick, minimum wt 3.00 kg/Sqm reinforced with p

Water proofing treatment to sunken slab and adjoining vertical surfaces as specified under:- (a) M&L rendering 10 mm thick in cement plaster (1:3) using coarse sand mixed with integral water proofing compound as per manufacturer's instruction trowel even and smooth with steel trowel on sunken surfaces (Note : WPC shall be measured and paid separately) (b) Applying first coat of chemical pidifin 2K(Dr Fixit) on cleared RCC surfaces @ 0.86 Kg/Sqm (Minimum) as recommended by manufacturer. (c) Provide a layer glass fibre mesh of size 2.25mm x2.25mm (45 GSM) over first coat of chemical Pidifin 2K as per manufacturers recommendation. (d) Applying second coat of chemical Pidifin 2K (Dr Fixit) @ 0.86 Kg/Sqm (minimum) layer glass fibre mesh of size 2.25mm x 2.25mm (45 GSM) as recommended by manufacturers.

Aluminium powder coated ventilator including provision of neccessary rubber gasket for fixing glass panes etc complete all as shown in drawing No CEBT/SK-936 sheet 1/1. Note: Glass panes and wiremesh shall be measured and paid seperately under respectively Items of BoQ.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish to a distance exceeding 1 km but not exceeding 2 km.

M&L non skid coloured ceramic tiles 7 to 8 mm thick ( square / rectangulr) area of each tile exc 0.11 n exc 0.18 sqm in floors etc set and jointed ON 15 Mmscreed bed in neat cement slurry and pointed in white or coloured cement to match

M&L for marble work (Udaipur green slabs) in one piece 15 to 18 mm thick slab of cills of windows and urinal partition and like in laid over and including M&L for 15 mm thick cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade and roundening to the edge of stone slabs on edges etc. all as specified.

M & L for 25 mm bore GI pipe, medium grade, ISI marked, with all fittings and fixed complete to walls and ceilings or laid in floors

S & F in repairs vitreous china, countertop oval shaped wash hand basin, white, of size 560mm x 450mm , including 32 mm dia brass chromium plated waste coupling and PVC waste pipe including angle iron brackets complete all as directed complete, .

S&F Vitrous china urinal half stall type white ( excluding flushing cistern, flush pipe and waste pipe ) including connections to flushing pipe and out going pipes etc complete all as specified and directed

M&L for rendering 10 mm thick in cement mortar in (1:3) finishing the surfaces even and smooth on ceiling complete all as specified.

M&L applying two coat of white wash over new plastered surfaces of wall etc complete all as specified

M&L preparation of newly plastered or unplastered surface and applying three coats of white wash on ceiling

complete removal of exsiting treatment and preparation of surface applying two coat of white wash over old plastered surfaces of wall etc complete all as specified

complete removal of exsiting treatment and preparation of old plastered or unplastered surface and applying two coats of cement base paint of approved tint complete all as specified

S & F CP health faucet 15 mm bore including 1 Mtr flexible led complete all as specified and directed.

Dismentalling water tanks of exc 500 ltrs and n exc 1000 ltrs capacity water storage tanks remove from site complete

S&F 1000 litres capacity Rotational moulded polyethylene in white colour, three layered, water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position

S&F ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe of size 25 mm bore (minimum weight 210 gram).

S & F Gun metal globe or Gate valve , with iron wheel , screwed both ends for iron pipe or for unions for 25 mm bore dia of pipe.

S & F stainless steel fancy type peg set of six and fixed in position with steel screws complete all as specified and directed.

Material and Labour for providing precast cement concrete (1:2:4) type B1 using 20mm graded stone aggregate in cooking plateform/slab including necessary formwork and setting in mortar set in cement mortar (1:4) complete all as specified and as directed.

M/Lfor half brick work with sub-class 'B' bricks, straight or curved on plan exc 6m mean radius built in In cement mortar 1:4

M&L for TMT bars 10 mm dia and over cut to length and bent to shape required including cranking, hooking ends and binding with and MS wire not less than 0.9 mm dia or securing with clips

S&F Udaipur green marble slab 18-20mm thick as in corner shelf of 300mm radius including cutting 30mm groves in wall and jointed & pointed with cement slurry mixed with pigment to match with marble and rounding of edges complete all as specified and directed.

S&F SFRC (Steel fibre Reinforcement concrete cover & frame ) HD-20mm, ISI marked conforming to IS-12592, graded rectangular clear opening 560X560mm fixed over manhole after demolition of PCC coping & manhole Cover & set in CM 1:4 including PCC benching in CM (1:2:4) and finishing smooth all as specified and directed

M&L 40 mm thick brick tiles on mud mortar and joints grouted flush and pointed in CM 1:3 mixed with crude oil @5% by weight of cement on mud pushka incl Dismentalling of brick tiles or tressing tiles single layer on roof complete all as specified and directed

M&L 40mm thick brick tiles on mud mortar and joints grouted flush and pointed in CM (1:3) mixed with crude oil @ 5% by weight of cement on mud phuska but except brick tiles (old serviceable brick tiles to be reused after proper cleaning & washing )incl.Di

M & L in repair PCC 1:2:4 for PCC type B-1 using 20 mm graded stone aggregate as in coping benching , padding etc complete all as specified and directed by Engineer-in-Charge

Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5 m high from base cmplete all as specified and as direcetd by the Engineer-in-Charge.

M&L for providing PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and as direcetd by the Engineer-in-Charge.

M&L for brick work with sub class ‘B’ bricks, straight or curved on plan exc 6 M means radius built in CM (1:6) using old size bricks complete all as specified and as directed.

M&L TMT steel bars 10 mm dia and over cut to length bent to shape required, including cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.90 mm dia cmplete all as specified and as direcetd by the Engineer-in-Charge.

Description all as per item No 168 above but 8 mm dia bars as in stirrups sacers and binders cmplete all as specified and as direcetd by the Engineer-in-Charge.

Reinforced cement concrete, M-25, design mix, (using 20mm graded crushed stone aggregates) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, including proper compaction using mechenical vibrator, complete all as specified and as directed by Engineer-In-Charge.

Reinforced cement concrete, M-25, design mix, (using 20mm graded crushed stone aggregates) as in Beams, cantilevers, bressummers, lintels over 1.50mtrs span, including proper compaction using mechenical vibrator, complete all as specified and as directed by Engineer-In-Charge.

Reinforced cement concrete, M-25, design mix, (using 20mm graded crushed stone aggregates) as in Columns, including proper compaction using mechenical vibrator, complete all as specified and as directed by Engineer-In-Charge.

M&L for providing RCC M 25, design mix, using 20 mm graded stone aggregate as in Chajjas cmplete all as specified and as direcetd by the Engineer-in-Charge.

M&L for Form work to sides and soffits of floor or roof beam, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc, also spalys between floors and beams etc. for rough finished surfaces of concrete flat cmplete all as specified and as direcetd by the Engineer-in-Charge.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to battercmplete all as specified and as direcetd by the Engineer-in-Charge.

M&L for Formwork to sides of Square /rectangular columns and stanchions cmplete all as specified and as direcetd by the Engineer-in-Charge.

M&L for Form work to chajjas including edges for rough finished surfaces of walls cmplete all as specified and as direcetd by the Engineer-in-Charge.

S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and as direcetd

S&F 150mm long Extruded aluminium alloy handles, fabricated type, anodised.

M&L for providing 75mm thick PCC (1:4:8) type D-2 (using 40mm graded agg) as in sub base. complete all as specified and as direcetd by the Engineer-in-Charge.

M&L for providing 25mm thick PCC (1:2:4) type B-0 (using 12.5mm graded agg) as in floor. complete all as specified and as direcetd by the Engineer-in-Charge.

M&L for providing Screed bed or bedding layer of mortor 15 mm thick in cement mortar 1:4 for laying of floor finishes complete all as specified and as direcetd by the Engineer-in-Charge.

M&L for Anti-termite treatment, treating the bottom and sides of excavation at the rate of 5lit of emulsion per Sqm of surfaces area compete all as specified and as direcetd by the Engineer-in-Charge.

M&L for Anti-termite treatment, treating the top surface of filled earth at the rate of 5 lit of emulsion per Sqm of surface compete all as specified and as direcetd by the Engineer-in-Charge

M&L for Anti-termite treatment, treating the soil under plinth protection at the rate of 5 lit of emulsion per Sqm of surface compete all as specified and as direcetd by the Engineer-in-Charge.

M&L for Anti-termite treatment,treating the soil along with external perimeter of building at the rate of 2.25 lit of emulsion per metre of the perimeter wall compete all as specified and as direcetd by the Engineer-in-Charge

S&F Solid PVC Wall Lining Consisiting of 5mm thick plain colour PVC Sheet inclusive of solvent cement and fixing at site on PVC frame including PVC Beading on edges & top etc as per specifications complete all as specified and directed.

S&F 5mm thick PVC Sheet Fillet of Width 35mm for wall Panelling inclusive of Fixing on to wall to make PVC frame as per specification complete4

S&F 5mm thick PVC Sheet in strips and channel channel feathered at the edges for fixing on wall panelling inclusive of solvant cement fixing at the site all as per specification complete

INTERNAL ELECTRIFICATION

Taking down carefully to existing serviceable copper point wiring (light,fan, socket or power) complete including fittings such as switches, bellpushes, ceiling roses, pendents, regulators, sockets, light fitting, callbells etc removing materials to E/M store for keeping in safe custody and making good disturbed surfaces of walls, floors etc. complete all as specified and directed.

M & L for Point wiring with multi-stranded copper conductor, single core, PVC insulated and unsheathed cable, including PVC insulated unsheathed multistranded copper conductor single core cable as earth continuity conductor to common earth and connected to earth dolly, GI terminal boxes, modular frame & cover plate (suitable for modular switch/sockets) comprising the following: -

One light point controlled by one switch or one fan point controlled by one switch & fan regulator etc. with 2.5 Sq. mm (nominal area) cable & 2.5 Sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC medium duty concealed conduit complete all as specified and directed.

One socket outlet three pin, 5/15 Amp, independent, with 2.5 Sq. mm (nominal area) cable & 2.5 Sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC medium duty concealed conduit complete all as specified and directed.

Note for serial item No 193 to 195: 1. Switch(es) & socket(s) shall be measured & paid for separately under respective item of Schedule 'A'. 2. GI boxes shall be fixed flush in position with cement mortar (1:4) complete all as directed.

M & L for point wiring with two run of 1.5 Sqmm (nominal area) PVC insulated, unsheathed multi strand copper conductor cable FR-LSH in existing conduit, and existing sunken boxes but including 3 mm thick phenolic laminated sheet top cover for sunken boxes flush to surface for one light point/fan point, controlled by one switch on the same board with other switch or independent including PVC insulated unsheathed 1.5 Sqmm copper conductor cable FR-LSH connected to common earth dolly complete including cutting, chasing the surface and then making good the same in CM (1:3) complete all as specified and directed by Engineer-in-charge.(Note :- Switches, sockets etc shall be measured and paid separately).

One light/fan/exhaust fan point controlled by one 5 Amps one way switch.

One socket outlet 3 pin 5 Amps on independant board.

All as per item No 197 here in before but for one socket out let 3 pin 15 Amp with 2.5 sqmm PVC copper conductor and 2.5 sq mm PVC insulated copper conductor as earth contiuity conductor.

S&F Switch modular type single pole, one way, 6 Amp, one module complete all as specified and directed.

S&F Switch modular type single pole one way, 16 Amp, one module complete all as specified and directed.

S & F switch piano, flush type single pole, one way 5/6 Amp complete all as specified and directed.

S & F switch piano, flush type single pole, one way 15/16 Amp complete all as specified and directed.

S & F socket outlet 2 in 1, 3 pin, 5A complete all as specified and directed.

S & F socket outlet 2 in 1, 3 pin, 5 and 15A combined flush type universal complete all as specified and directed.

S&F Socket outlet modular type multipurpose 2/3 pin single pole one way 6/16 Amp, two module, shutter type complete all as specified and directed.

S&F Ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified and directed.

S&F in replacement sub main wiring with three run (phase neutral and earth) of 6 sqmm PVC insulated and unsheathed copper conductor cable in and including min 25 mm dia non metalic rigid PVC conduit and accessories like tee, bend, socket and copper lugs etc complete including cutting chasing and grouting on any type of wall, making good to the disturbed surfaces with CM (1:6) complete all as specified and directed. Note- Three run of copper conductor cable with conduit and accessories shall be measured as unit length.

S&F MCB 6-32 Amp 240V SP 10 KA ‘C’ series complete all as specified and directed.

S&F MCB 20-32 Amp 240V SP 10 KA ‘C’ series complete all as specified and directed.

S&F MCB 40-63 Amp 240V SPN 10 KA ‘C’ series complete all as specified and directed.

S&F in replacement sheet metal encloser double door 08 way SPN suitable for 240Volt AC supply ISI marked complete with neutral and earth bus bar, made out of CRCA steel sheet Factory made including blanking plate for unused module complete all as specified and directed.

Supply and fixing factory made Loadline vertical type TPN DB 4 way double door, protection class IP 43 made out of CRCA sheet with 200 Amps rated copper busbar, neutral and earth link, blanking plates, locking arrangement and 125 Amps 4Pole MCCB as incomer complete all as specified and directed incl taking down old DB complete all as specified and directed.

S & F LED light fitting 1x20 watt, 230 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220V AC decorative type driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing exhaust fan metal body AC, single phase, 230V of size 450mm sweep with blades and frame and louers including making suitable size hole into wall and plastering the wall and plastering the wall with cement mortar complete all as specified and directed.

Supply and fixing storage type water heater (geyser) electrical operated 230/240 volts 25 ltr capacity, BEE 5 star rated complete with all safaty equipment and accessaries such as safety valve, thermostat, plug top, etc. required for proper functionality and including electric/earth connections and carrying out grounting and complete installations with mounting bolts, nuts including testing after installation complete all as specified and directed.

S&F wall mounted extruded Aluminium/polycarbonate LED batten fixture T8(G13 holder) 1.2 m, including one LED retrofit tube 20(±10%) watt, 1.2 m T8 6500K,efficacy not less than 90 lumen/ watt, extruded Aluminium / polycarbonate, PC diffusor and inbuilt driver complete complete including making connection complete all as specified and directed.

S&F wall mounted LED batten fitting 10 (±10%) watt, 6500K, 0.6m, efficacy not less than 90 lumen/watt , extruded Aluminium/polycarbonate, PC diffusor and inbuilt driver complete includign making connection complete all as specified and directed.

S&F lamp holder PVC/polycarbonate type with back plate complete all as specified and directed.

S&F LED 7W lamp base B-22 complete all as specified and directed.

Labour only for dismentling and taking down of existing serviceable MCB DB 8way along with MCB SPN/DP/SP etc with due care and safely complete and refixing the same (after carring out repair work/rewiring in Accn), making connection serviceable complete all as specified and directed.

Supplying and laying XLPE LT cable of size 16Sqmm, 4 core, 1100 volt grade heavy duty with XLPE insulated standard aluminium conductor served with an inner sheathening of PVC tape armoured with galvanized steel strip or wire and over all PVC sheathed stranded conductor conforming to IS-7098 (Part-I) with latest amendments laid in trenches/fixed to wall/pole/laid in floor including mecessary connections and suitable size of thimbling complete all as specified and directed. (Excavation and earth work, sand cusioning and GI pipe shall be measured and paid for separately),

Removing excavated surplus soil to a distance n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed

M&L for Sand cushioning in trenches for cables including watering and consolidation complete all as specified and directed

Supply, laying & testing(In Repair 'light grade' galvanised, 40mm bore with all fitting, unions, elbows etc and fixed complete to walls and ceilings or laid in floors complete all as specified and directed

Supplying and laying bricks common brunt clay building bricks sub class B designation 75 complete all as specified and directed

M & L for earthing with galvanized steel plate electrode 600 x 600 mm x 6 mm size directly burried in ground vertically to earth pit not less than 2.25 meter deep below normal ground level with top edge of the earth plate not less than 1.5 m below normal ground level surrounded with coal dust and common salt filling in alternative layers of 15 cm thick each connected to and including GI earth wire 4 mm dia by means of nuts, bolts, check nuts & washers etc connecting to earthing test point, main switch board and including 15 mm dia GI pipe light grade for protection of earth lead from earth plate to distribution board and 20 mm dia GI pipe medium grade connected with funnel having wire mess for watering purpose including necessary excavation and earth work, PCC (1:2:4) type B-1 (using stone aggregates) for earthing pit, 10mm thick cast iron cover with angle iron frame all as specified and shown in electrical plate No 3 of SSR Part-I and testing on completion including replacement of old unserviceable.

Note:- Net contract sum shall be calculated after deduction of Sch of credit.

M/s Manav Builders

RAMA AUTOS

AABIA CONSTRUCTION

M/s Luxmi Constructions

M/s Kamal Builders

Ajay Enterprises

KULWANT RAI

GUPTA AND ENGINEERS

JAGMEET SINGH CONTRACTOR