A.R and M.O of HPPWD A.E. Residence building Nankhari in Tehsil Nankhari Distt. Shimla H.P.

Amount

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required) ncluding hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing 0.62 mm thick plain prepainted steel sheet roofing, with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge.

Providing and fixing M.S. BP Sheet 1.66mm to 2.00 mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely)/F M.S BP sheet 1.66mm to 2.00mm thick in eaves board/ Facia/ Soficts/ Ceiling including cutting fixing and welding to steel roof member and applying a coat of Red lead primer complete ncluding hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per ncluding hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and laying fully body viitrified floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete ncluding hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. : ncluding hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over anunder coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture ncluding hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade ncluding hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing pine wood strips in cealing (Frames, backing or studding to be paid separately) with naccesory fitting arrangements complete.

Provinding anf fixing 9mm thick ply wood with naccesory fitting arrengement complete, complete.ncluding hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing specified wood frame work consisting of battens 50x25mm fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat completee complete. ncluding hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Prelaminated one side decorative lamination and other side balancing lamination Grade I, Type II, IS : 12823 marked, including priming coat on unexposed arrangement and screws etc. complete ncluding hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

French spirit polishing :Two or more coats on new works including a coat of wood filler ncluding hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing WI-Paraquit or action tesa clip in prelaminated wooden flooring (H.D.F) with poly sheet & thermocoal sheet with door profile and side moulding locks with all fittings ,etc. complete. ncluding hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat ron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. ncluding hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 15 mm nominal bore ncluding hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge. Concealed work, including cutting chases and making good the wall etc.1620 (20 mm OD) pipe ncluding hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :White Vitreous china Anglo Indian Closet No. 2061 of size 550x460 mm of CERA or equivalent ncluding hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: Wash basin No.1012 or CERA or equivalent. ncluding hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. ncluding hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete 25 to 40 mm nominal bore) ncluding hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete) ncluding hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms ) ncluding hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing uplasticised PVC connection pipe with brass unions 30 cm length ncluding hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.32 mm dia. ) ncluding hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms 15 mm nominal bore ) ncluding hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing PTMT pillar cock of approved quality and colour 15 mm nominal bore, 107 mm long, weighing not less than 110 gms ) ncluding hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Providing & fixing 100mm dai C.P. gratings of superior quality for floor, gully or nahani trap including carriage of materials within all leads & lifts ) ncluding hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

GM Industries