REPAIR AND REPLACEMENT OF ELECTRIC WIRING, LIGHT FITTINGS AND CONNECTED E/M ITEMS AT HQ DELHI AREA, STN HQ, DID LINE, DAPU, HARBUX STATIUM, PRINTING PRESS COMPLEX, 10 PARS, ECHS, HUTS AND CONNECTED AREAS UNDER GE (EAST) DELHI CANTT-10

Amount

Taking down/ out carefully copper/aluminium point wiring for light/fan/bell/ sockets 5/15 Amps complete without accessories as switches, Sockets, holders, ceiling roses, light fitting regulators etc (to be measured and paid separately under relevent item of this Sch as S&F in repair and credit for these item given in credit schedule here-in-after) and making good the disturbed surface all as directed.

M&L for point wiring with single core fire retardant low smoke PVC insulated, unsheathed multi stranded copper conductor of size 1.5 sqmm alongwith 1.5 sqmm earth wire of multi stranded copper conductor (with same specification) connected to common earth dolly and drawing through existing surface/concealed conduit pipe and in existing MS box/ metal flush box covered with existing hylem sheet / modular cover plate with frame for mounting switches, sockets or fan regulators etc for the following :-

(a) One light point/ fan point/ bell point controlled by one switch

(b) One socket outlet 5 Amps controlled by one switch on same board

(c) One socket outlet 5 amps controlled by one switch on independent board

(d) one light point controlled by two 2 way switches

All as per item No.2 here in before but wiring with 2.5sqmm cable for socket out let on independent board.

S&F in repair switch piano flush type, 6 amps one way,SP,230 volts AC all as directed.

S&F in repair switch piano flush type, 6 amps two way,SP,230 volts AC all as directed.

S&F in repair switch piano flush type, 16 amps one way,SP,230 volts AC all as directed.

S&F in repair switch piano bell push flush type, 6 amps one way,SP,230 volts AC all as directed.

S&F in repair socket outlet 6 amps 5 pin , all as directed.

S&F in repair socket outlet 6&16 amps 6 pin all as directed.

S&F in repair piano type Step fan regulator, 100 watts single module all as directed.

S&F in repair modular switch flush type, 6 amps one way,SP,230 volts AC all as directed.

S&F in repair modular switch flush type, 6 amps two way,SP,230 volts AC all as directed.

S&F in repair modular switch flush type, 16 amps one way,SP,230 volts AC all as directed.

S&F in repair modular switch bell push flush type, 6 amps one way,SP,230 volts AC all as directed.

S&F in repair modular socket outlet 6 amps 5 pin 2 module all as directed.

S&F in repair modular socket outlet 6 & 16 amps 6 pin multipurpose combined 2 module all as directed.

S&F in repair modular Step Fan regulator, 100 watts single module all as directed.

S&F in repair Modular white cover plate with frame 1 module all as directed

S&F in repair Modular white cover plate with frame 2 module all as directed

S&F in repair Modular white cover plate with frame 3 module all as directed

S&F in repair Modular white cover plate with frame 4 module all as directed

S&F in repair Modular white cover plate with frame 6 module all as directed

S&F in repair Modular white cover plate with frame 12/8 module all as directed

S&F in repair Modular Metal Flush Box 1/2 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified and as directed

S&F in repair Modular Metal Flush Box 3 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified and as directed

S&F in repair Modular Metal Flush Box 4 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified and as directed

S&F in repair Modular Metal Flush Box 6 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified and as directed

S&F in repair Modular Metal Flush Box 12/8 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified and as directed

Supply and fixing in replacement of lamp holder PVC/ Polycarbonate type insulated body with back plate suitable for batten fittings complete all as specifed and as directed.

Supply and fixing in replacement of Ceiling rose, insulated body, 3 terminal, 240 volts complete all as specified and as directed,

Supply and fixing in replacement of electric bell of DINGDONG type, 6 Amps, 240 volts, single pole and making all necessary connections complete all as directed.

Supply and fixing in replacement of wall light fitting with and incl 9 watt LED lamp complete. (Make: Philips comet or equivalent in Wipro/ Havells).

S&F in replacement LED Bed Side Flexible Arm lamp 3W complete all as specified and directed. (Make: Philips 48042 or equivalent in Wipro/ Havells)

S & F in replacement LED energy efficient integrated battens fittings, PVC extruded heat sink with shatter proof opal shell of polycarbonate compound, 20 Watts, cool/warm white as per site requirement complete all as specified and directed.

S & F in replacement of LED energy efficient integrated battens fittings, PVC extruded heat sink with shatter proof opal shell of polycarbonate compound, 10 Watts, cool/warm white as per site requirement complete all as specified and directed.

S&F in replacement of bulk head fitting 6.5 W with PMMA diffuser complete all as specified and directed.

Supply and fixing in replacement of LED ceiling light fitting 18 watt, in square shape, surface cum recess type cool/warm white with inbuilt driver as per site requirement and making all electric connections complete all as directed.

Supply and fixing in replacement of LED ceiling light fitting 15 watt, in round shape, surface/recess type cool/warm white with inbuilt driver as per site requirement and making all electric connections complete all as directed.

Supply and fixing in replacement of LED ceiling light fitting 10/12 watt, in round shape, surface/recess type cool/warm white with inbuilt driver as per site requirement and making all electric connections complete all as directed.

Supply and fixing in replacement of LED ceiling light fitting 6 watt, in round shape, surface/recess type cool/warm white with inbuilt driver as per site requirement and making all electric connections complete all as directed.

Supply and fixing in replacement of suspended architectural 40W LED luminiare, soft light and glare free symmetrical illumination with end caps warm / cool light with mounting string complete all as specified and as directed.

S&F in replacement of Recess/Surface mounting 2x2 square flat panel ultra slim scoop LED light 36 W warm/cool white with driver/transformer etc suitable for Grid ceiling/Gypsum board/POP ceiling incl making electric connection complete as as directed.

S & F in replacement of energy efficient LED fittings 45W LED suitable for building security light pressure die cast aluminium roadway luminaire with high power LEDs and HF electronic driver complete all as directed.

Supply and fixing in replacement of area lighting LED flood fitting 120W complete all as specified and as directed.

Supply and fixing in replacement of street light fitting bracket, 1.0 mtr long made out of galvanized iron pipe of 25 mm dia size light grade complete with nut, bolts, washer, clamps etc inclusive of one primer coat, one under coat and one finishing coat of silver paint complete all as directed.

Material and labour for replacement of submain wiring complete with 2 x 4.0 sqmm (nominal area) FRLS, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked and 1 x 4 sqmm( same specification ) as earth wire in existing PVC conduit complete all as directed

Material and labour for replacement of submain wiring complete with 2 x 10.0 sqmm (nominal area) FR, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked and 1 x 10 sqmm (same specification ) as earth wire in existing PVC conduit complete all as directed.

Material and labour for replacement of submain wiring complete with 2 x 16.0 sqmm (nominal area) FR, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked and 1 x 16 sqmm( same specification ) as earth wire in existing PVC conduit complete all as directed.

Supply and fixing in replacement of MCB C Curve type, 10 kA, 10 to 32 Amp, Single Pole with over load and short circuit protection complete all as directed.

Supply and fixing in replacement Isolator SPN 40 A including connections complete all as specified

Supply and fixing in replacement Isolator SPN 63 A including connections complete all as specified

Supply and fixing in replacement Isolator TPN 43 A including connections complete all as specified

Supply and fixing in replacement Isolator TPN 63 A including connections complete all as specified

Supply and fixing in replacement Isolator TPN 100 A including connections complete all as specified

Supply and fixing in replacement of Modular AC Socket with 25 Amps SP mini MCB, 230 Volts, 50Hz. In 3 module sheet metal enclosure complete all as specified and as directed.

S & F in replacement of MCCB, 415 volts, three pole of cap 100 Amps, 10 KA, ICS = 100% ICU, with Thermal - Magnetic Release, including necessary spreader / thimbles of suitable size and making connections complete all as directed.

S & F in replacement of MCCB, 415 volts, three pole of cap 160Amps, 25 KA, ICS = 100% ICU, with Thermal - Magnetic Release, including necessary spreader / thimbles of suitable size and making connections complete all as directed.

S & F in replacement of MCCB, 415 volts, three pole of cap 200 Amps, 36 KA, ICS = 100% ICU, with Thermal - Magnetic Release, including necessary spreader / thimbles of suitable size and making connections complete all as directed.

S&F of MCB DB conforming to IP 43 - IK 09 with single door, SPN 04 way, double door complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces.

S&F of MCB DB conforming to IP 43 - IK 09 with double door, SPN 08 way, double door complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces.

S&F of MCB DB conforming to IP 43 - IK 09 with double door, SPN 12 way, double door complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces.

Supply and fixing in replacement of MCCB incommer Distribution Board ( Vertical Load line DB) double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, VTPN 04 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCCB as incommer and MCB as outgoing and making all necessary connections and taking out the old unserviceable DB complete all as directed. Note:- MCCB & MCBs will be measured and paid separately

Supply and fixing in replacement of metal enclosure AC Socket with metal clad top with 25/20 Amps SP mini MCB, 230 Volts, 50Hz. In 3 module sheet metal enclosure complete all as specified and as directed.

Supply and fixing in replacement of Ventilating fan 250 mm sweep plastic body type including self cosing louver and making all electric connections complete all as directed.

Supply and fixing in replacement of Ventilating fan 200 mm sweep plastic body type including self cosing louver and making all electric connections complete all as directed.

Supply and fixing in replacement of PVC casing & capping ( ISI marked) 20 mm width double lock type inclusive of all fittings such as tees, bends, elbow, etc and all fixing accessories such as couples,Pvc Rawal Plugs, saddles, etc complete all as directed.

Supply and fixing in replacement of PVC casing & capping ( ISI marked) 25 mm width double lock type inclusive of all fittings such as tees, bends, elbow, etc and all fixing accessories such as couples,Pvc Rawal Plugs, saddles, etc complete all as directed.

S&F in replacement of rigid non metallic PVC conduit 20 mm dia medium grade inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook etc complete surface mounted / concealed and making good the surface all as specified and and as directed.

Supply and fixing in replacement of Wall Mounted Fan 400 mm sweep plastic body type including making all electric connections and depositing the old u/s to MES store yard complete all as directed.

S&F BLDC (Brushless Direct Current) Ceiling Fan (energy efficient), 1400 mm suitable for regulator, not less than 6 service value, voltage 220V,having full copper motor winding & ribbed 3 Nos A/M blades, 5 star rating and making necessary electric connection of with flexible cable FR PVC insulated 3 core copper conductor of size 0.50sqmm (23/76) from ceiling rose to fan complete including taking down existing fan and depositing to MES store yard.

M&L for rewinding of exhaust fan(300mm)/wall mounting fan(400mm) with super enamelled copper wire of required size duly varnishing including greasing/oiling and commissioning/testing to the entire satisfaction of Engineer-in-charge.

M&L for rewinding of exhaust fan(380/450mm) with super enamelled copper wire of required size duly varnishing including greasing/oiling and commissioning/testing to the entire satisfaction of Engineer-in-charge.

M&L for rewinding of Ceiling fan 1200/1400mm sweep with super enamelled copper wire of required size duly varnishing including greasing/oiling and commissioning/testing to the entire satisfaction of Engineer-in-charge.

Supply and fixing exhaust fan upto 300 to 450 mm sweep metalic body type and making all electric connections complete all as directed and depositing the old U/s item to MES store yard.

Supply and fixing heavy duty exhaust fan(380/450mm) with super enamelled copper wire of required size and commissioning/testing to the entire satisfaction of Engineer-in-charge.

S & F in replacement plastic body capacitor of capacity 2.5 mfd with wire suitable for single phase motor and making connection complete all as specified and directed

S&F in replacement of ball bearing No 6201/6202 suitable for ceiling fan complete all as specified and directed.

M & L in replacement ceiling fan down rod fabricated out of MS pipe medium grade 15 mm dia cut to length as per site requirement duly painted white with synthetic enamel paint over a coat of red oxide primer having through hole and cut of suitable size at both end for fixing ceiling fan and clamp etc complete all as specified and as directed

S&F in replacement MS clamp with rubber real including nut, bolt and split suitable for ceiling fan to hook complete all as specified and as directed.

S&F PVC Gang Box suitable for one No 5 Amps Switch and one No 5 Amps Socket complete all as specified and as directed.

S&F PVC Gang Box suitable for two No 5 Amps Switch and two No 5 Amps Socket complete all as specified and as directed.

S&F PVC Gang Box suitable for one No 15 Amps Switch and one No 15 Amps Socket complete all as specified and as directed. Make : Presto plast/Pressfit/Polyplast.

S & F in replacement of aluminium cable 1100 Volt grade, served with inner sheathing of PVC tape and overall PVC sheathed twin core cable circular of size 4 Sqmm ISI marked in service connections, including taking down old unserviceble cable complete all as directed.

S & F in replacement of aluminium cable 1100 Volt grade, served with inner sheathing of PVC tape and overall PVC sheathed twin core cable circular of size 6 Sqmm ISI marked in service connections, including taking down old unserviceble cable complete all as directed.

S & F in replacement of plug top 3 pin 10/20 amp earth metal clad suitable for industrial type DB complete all as directed.

S & F in replacement of socket 3 pin 10/20 amp earth metal clad suitable for industrial type DB complete all as directed.

Supply and fixing in replacement of 'T' cover Bakelite sheet 2 mm thick in round shape complete all as specified.

Supply and fixing in replacement of Bakelite sheet 3mm thick of size 5"x5" duly wire cut for switches, sockets, regulator etc as per site requirement as directed.

S&F in replacement of Bakelite sheet 3mm thick of size 8"x5" duly wire cut for switches, sockets, regulator etc as per site requirement as directed.

S&F in replacement of Bakelite sheet 3mm thick of size 8"x10"duly wire cut for switches, sockets, regulator etc as per site requirement all as directed.

S&F in replacement of Bakelite sheet 3mm thick of size 10"x12" duly wire cut for switches, sockets, regulator etc as per site requirement all as directed.

Taking down old unserviceable LT U/G cable any size and core complete all as specified.

S&F XLPE insulated armoured heavy duty U/G aluminium conductor cable served with an inner sheathing of PVC tape armoured with galvanised steel strip wire or tape and overall PVC sheathed of size 10 Sqmm 2 core.

S&F XLPE insulated armoured heavy duty U/G aluminium conductor cable served with an inner sheathing of PVC tape armoured with galvanised steel strip wire or tape and overall PVC sheathed of size 16 Sqmm 2 core.

S&F XLPE insulated armoured heavy duty U/G aluminium conductor cable served with an inner sheathing of PVC tape armoured with galvanised steel strip wire or tape and overall PVC sheathed of size 16 Sqmm 4 core.

S&F XLPE insulated armoured heavy duty U/G aluminium conductor cable served with an inner sheathing of PVC tape armoured with galvanised steel strip wire or tape and overall PVC sheathed of size 25 Sqmm 4 core.

S&F XLPE insulated armoured heavy duty U/G aluminium conductor cable served with an inner sheathing of PVC tape armoured with galvanised steel strip wire or tape and overall PVC sheathed of size 50 Sqmm 3 1/2 core.

Excavation in trenches in soft / loose soil not exceeding 1.5 meter depth and not exceeding 1.5 meter wide and getting out including trimming of sides complete all as directed.

Material and labour for brick protection to cable using old size class 'B' bricks, laid flat, dry butt jointed, laid lengthwise perpendicular to the axis of cable complete all as directed.

Material and labour for sand cushioning with a layer of fine sand 8 cm thick before laying the cable and 15 cm after laying the cable in trenches to cover under ground cable complete all as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as directed.

Removal of excavated material n exc 50m and depositing n exc 1.5m above starting point complete all as specified and as directed..

M&L Cement concrete in foundations, filling and mass conc in ratio 1:3:6 type C2 with 40mm stone graded complete all as specified.

S&F in replacement Galvanised Steel tubing light grade with all fittings for road crossing, passing cable etc of size 50mm bore.

Supply and fix in replacement Industrial Switchgear Busbar Chambers, current rating 100 Amps, 4 Way with 04 Nos copper busbar complete all as sfd.

Supply and fix in replacement Industrial Switchgear Busbar Chambers, current rating 200 Amps, 4 Way with 04 Nos copper busbar complete all as sfd.

Supply and fix in replacement Industrial Switchgear Busbar Chambers, current rating 400 Amps, 4 Way with 04 Nos copper busbar complete all as sfd

S & F in replacement of MCCB, 415 volts, 4 pole of cap 630Amps, 36 KA/50 KA, ICS = 100% ICU, with Thermal - Magnetic Release, including necessary spreader / thimbles of suitable size and making connections complete all as directed.

Supply and fixing of Geyser 25 ltre capacity vertical type with steel tank and glass inner linen, 5 star rating complete including taking down the old u/s geyser and depositing to MES store yard complete all as specifed and directed.

Supply and fixing in replacement of heating element 1.5/2 KW capacity round/triangular/banana/inbuilt thermostat type for geyser of any type/Make and capacity including making necessary electric connections and testing the geyser complete all as directed. Make : Dasspass/Theeta/Venus/Bajaj. Note : The petty items such as nut, bolt, clamps etc are deemed to be included in quoted rates.

Supply and fixing in replacement of thermostat ISI marked for geyser of any type/Make and capacity as per sample, including making necessary electric connections and testing the geyser complete all as directed. Make : Dasspass/Theeta/Bajaj/Venus

M &L in replacement Stainless steel Geyser tank 25/35 Ltr capacity suitable for fixing in 6/9 nut assembly complete all as specified and directed.

M &L in replacement Stainless steel Geyser tank 50 Ltr capacity suitable for fixing in 6/9 nut assembly complete all as specified and directed.

M &L in replacement of base plate assembly of 6/9 holes suitable for fixing on a geyser tank 25/35/50 Ltr capacity incl Nuts & rubber packing for water tight joint complete all as specified and directed.

Supply and fixing in replacement of steel wired connection 600mm long and C P brass adopter 10 mm dia with washer for geyser of any type/Make and capacity complete all as directed.

Supply and fixing in replacement of CP non return valve in position internally screwed on one end and externally screwed on other ends, suitable for iron pipe of size 15mm dia, suitable for geyser of any type/Make and capacity complete all as directed.

Supply and fixing in replacement of fuseable type pressure valve, suitable for geysers of any type/Make and capacity complete all as directed.

Supply and fixing in replacement of indicator lamp red/green suitable for geyser of any type/Make and capacity including making necessary electric connections and testing complete all as directed.

M&L for soldering & brazing of inner copper tank of size 25/35/50 Ltrs and refixing it into the geyser complete all as specified.

Supply and fixing in replacement of PVC insulated PVC sheathed 3 core 1.5 sqmm copper conductor multistranded cable complete all as specified and as directed

S&F PVC top, 3 pin 15 Amps, 230 Volts, 50 Hz. Complete all as specified and as directed.

S&Fin replacement of Steel fastneer of 4" long and 8mm dia with Nuts & washer complete all as specified and as directed.

Supply and fixing in replacement on walls/ceiling / in floors etc CPVC pipe and plain CPVC SDR 11 fittings of external dia 25 mm complete all as specified and as directed

Supply and fixing in replacement single phase medium to high speed asynchronous motor with complete copper winding capacity ranging 25W TO 35 Watt for fresh air fan/exhaust fan for AC 220V 50 Hz complete all as specified.

S & F in replacement of PVC flexible pipe 20mm dia complete all as specified and directed.

Material and labour for earthing complete with GI earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground not less than 2.25 mtrs below ground level with top edge of plate not less than 1.5 mtr deep below normal ground level connected to galvinised earth wire 4 mm by means of nuts, bolts and check nut to earth plate and to main board or DB including necessary PCC 1:2:4 type B-1 pit, cover frame , GI pipe 15 mm dia light grade for protection and GI pipe 20 mm dia medium grade for watering with funnel, wire mesh, salt and charcoal dust all over the plate all as specified and as directed.

Attending complaint at site related to electrical or plumbing fault and making the high pressure booster pump functional including replacement of minor spares like nut, bolts, clamps, screws, gasket and pieces of cable etc complete all as specified and directedNote: Major items covered under "supply only" in this relevant items of schedule/BoQ.

Supply only of high pressure booster pump with 8 ltr capacity pressure tank, coupled with electric motor of capacity 0.50 HP, 230 volts, single phase, 50 Hz incl Pressure Guage, Pressure switch & connecting accessories of GI i.e bend, nipple, socket, tee of requisite size etc incl cutting of existing pipe complete all as directed. Make: Usha/Crompton/V Guard/Khaitan/CR/Leader/Accord

Supply only of high pressure booster pump with pressure tank, coupled with electric motor of capacity 0.18 HP, 32 LPM at 9 m head min, 230 volts, single phase, 50 Hz incl. Pressure switch & connecting accessories of GI i.e bend, nipple, socket, tee of requisite size etc incl cutting of existing pipe complete all as directed. Make: Lubi/Crompton/V Guard/Khaitan/CR/Leader.

Supply only pressure cylinder of capacity 8L suitable for 0.5 to 1 HP Booster pump complete all as specified.

Supply only Pressure Guage 50mm dia suitable for pressure vessel radial. 0-180 Psi Pressure Range complete all as specified and directed. Make:- Fiebig/AE

Supply only 5 port Brass Splitter Manifold Distributor 1 inch 1/4" for pressure Vessel Expansion suitable for Booster Pump upto 1 Hp capacity complete all as specified and directed.

Supply only Booster Pump relay SK9/ PM5 type, 240 Volts, 50Hz suitable for 0.5HP to 1 HP booter pump complete all as sfd. Make:- Danfoss/Zerodis

Supply only Booster Pump relay KP 35/36, 240 Volts, 50Hz suitable for 0.5HP to 1 HP booter pump complete all as sfd. Make:- Danfoss

Supply only spring loaded non-return valve/Check valve of suitable size for fixing in suction line of booster pump upto 1 HP capacity complete all as specified.

Taking out burnt motor motor of capacity 0.5 HP and refixing in position after rewinding with super enamelled copper wire of required size and F class insulation duly varnishing including greasing/oiling and commissioning/testing to the entire satisfaction of Engineer-in-charge.

S&F of round or elliptical equivalent shape globe with gallery white in colour with translucent in property including nuts and screw to fit on existing pipe of size ranging in between 200mm to 800mm complete all as directed

Supply and fixing brass machine screw of size in ranging from 1’to 4’to be fixed the bakelite sheet or any board by making proper drills or holes through tiles or wall or any surface as per site need with washers and then making surface even after works etc as specified and directed.

M&L in replacement XLPE insulated armoured heavy duty electric cable with aluminum conductor, 1100 volt, size 6sqmm 2 core complete all as specified and as directed.

Taking out burnt motor motor of capacity 1 to 5 HP and refixing in position after rewinding with super enamelled copper wire of required size and F class insulation duly varnishing including greasing/oiling and commissioning/testing to the entire satisfaction of Engineer-in-charge.

S& F in replacement of Static Energy Meter single phase electronic type with LCD display of capacity 10-40A including connection with seal and sealing wire including taking out the old u/s and depositing to MES store yard complete all as specified and as directed.

S& F in replacement of Static Energy Meter three phase electronic type with LCD display of capacity 10-60A including connection with seal and sealing wire including taking out the old u/s and depositing to MES store yard complete all as specified and as directed.

S & F in replacement of MCCB, 415 volts, 4 pole of cap 400Amps, 36 KA, ICS = 100% ICU, with Thermal - Magnetic Release, including necessary spreader / thimbles of suitable size and making connections complete all as directed.

S&F in replacement sub main wiring with 2 runs of 1.5 Sqmm FRLS single core PVC insulated & unsheathed cabl, 1100 Volts grade with multi stranded copper conductor drawn through and including 20 mm dia concealed PVC rigid non metallic conduit medium grade as per IS with all fittings and one run of 1.5 Sqmm FRLS PVC insulated copper conductor including cutting chases and making good in CM 1:3 to match with existing surfaces complete all as specified and as directed. Note:- (Two run of cable along with earth conductor including PVC rigid conduit shall be measured as one RM length).

S& F zero watt bulb in set in colour combination of red and green for engagement light .

PARMAR ENTERPRISES (BID ID -3202555)

M/s Sohanil Construction (BID ID -3203039)

aggarwal engineers contractors (BID ID -3208412)

Saraswati Construction Co (BID ID -3203529)

M P TYAGI ENGINEERS AND CONTRACTORS (BID ID -3207822)