423 Hariparvat Zone, Ward No. 87 Road improvement work using hot-mix in Amita Vihar Colony, from Gate No. 2 to St. Ange School.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam (22.4-53) specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density

Providing and applying primer coat with SS1 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means.

Providing and laying dense graded bituminous macadam with higher capacity hetch type HP using crushed appregates premixed with bituminous binder 4.5 per cent by weight of total mox and fer transporting the hot me to work ate laying with a hydrostatic pever finisher with sensor control to the required grade level and allgeant roling with smooth wheeled, vibratory and landem collars is achieve the desired compaction as zer MoRTH specification cleuse No. 10 505 complete in all respects including col of at materials labour, carnage for proper completion of work as per direction of Enginee-in-Charges

Providing and applying tack coat with bitumen VG-10 using Bitumen pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous/ granular surface cleaned with mechanical broom as per MoRTH specification 5th revision clause No. 503 including cost of all materials, T&P, labour, cartage for proper completion of work as per direction of Enginee-in-Charges.

Providing and laying bituminous concrete (Grading-I) with 100-120 TPH het mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading. eding, premixed with bituminous binder VG-30 as per approved jsti mix formula which ever is higher of mix and filler, transporting the hol mix to work alle, laying with a hydrostatic paver finisher with senser contrut to the required grade, level and alignment, rolling with smooth wheeled, vibratory and landam rolfers to achieve the destred compection as per MORTH specification sth revision clause No. 500 complete in all respects including cost of all materials, T&P labour cartage for proper completion of work as per direction of Enginee-in-Charges

Providing and laying hot applied thermo plastic compound 2.5 mm thick including refletrorising glass beads @250 gm/sqm. Area, thickness of 2.5 mm is exclusive of surface applied glass beads as per I.R.C. 35. The finish surface to be level, uniform and free from steaks and holes. Composition of thermo plastic material shall be as per table 800–3 of clause 803 of MORTH including cost of work as direction E/IC.

Supply & Fixing Granite Display Board including Painting, Lettering etc. all complete.

Sub Total (A)

Add / Deduction For Estimate Figure Amount Match

Grand Total