09/NDMC/2025-26 (2nd Call)

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including cutting, screwing welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets, chilly clamps, including cutting holes and chases in bricks/core cutting in RCC wall/slab etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame including providing coat of steel primer and painting with two or more coats of synthetic enamel paint of approved required shade etc. complete to the entire satisfaction of Fire Officer. The measurement of pipe upto the level finish MS Pipe in the elbow.

25 mm dia

80 mm dia

100 mm dia

Supplying and Fixing of Water Tank made of Stainless Steel grade 304 of Capacity 5000 LTRS, Dia - 1800 mm, Height - 2000mm, Shell Thk-5mm, Top/Bottom Flat Thk-6mm, Inlet/Outlet & Manhole As Per Requirement, Type- Vertical Cylindrical Tank, MOC - SS 304 (Weight 800KG Appx.) etc. complete to the entire satisfaction and direction of Fire Officer/Engr-in-Charge.

Providing suitable foundation for Polyethylene Water Storage Tank at terrace level with having CC 1:2:4 (1 cement : 2 Corses sand : 4 Stone aggregate of 20 mm nominal size) for placing the same at terrace level. The work included 12 mm cement plaster 1:3 (1 cement : 3 Cors Sand) with a floating coat of neat cement punning including centering and shuttering required etc. complete to the entire satisfaction of Fire Officer.

1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. (d) Suitable cement concrete foundation duly plastered and with anti vibration pads. 900 lpm at 35 m Head

Providing and fixing of G.I.Tank connection including nipple, washer, socket, check nut outside and inside and making necessary connection etc. complete as per the direction of Fire Officer (80 MM Dia).

P/F/T/C of Fire Cabinet Fabricated from 16 SWG M.S. Sheet with front double door opening including fixing/welding BRC fabric of size 25 x 25 mm of 12 SWG in door opening as well as providing 4 mm thick glass sheet of following size etc. complete in all respect and entire satisfaction of Fire Officer. 1200 x 900 x 450 mm

Supplying and fixing First-Aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS:12585. 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. 30 M Long

Supplying and fixing Single Headed Internal / External Hydrant Valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with 80 mm dia flanged inlet, cast iron wheel ISI marked conforming to IS 5290 (Type-A) with blank Gunmetal/Stainless Steel cap, chain and all accessories as required etc. complete to the entire satisfaction of Fire Officer. Single Headed Stainless Steel

Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required

P/F/T/C of Pressure Switch in the main pipe line to the entire satisfaction of Fire Officer.

P/F/T/C of Forged Brass Air Release Valve of 25 mm dia of approved quality etc. complete as per the entire satisfaction of Fire Officer

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required

80 mm dia

100 mm dia

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required

80 mm dia

Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required. 2 way-100 mm dia M.S. Pipe

P/F/T/C/ of Forzed Brass Ball Valve screwed type of approved quality complete to the entire satisfaction and direction of Fire Officer/Engr-in-Charge.

25 mm dia

S/I/T/C of Copper Conductor PVC Insulated and PVC sheathed armoured cable ISI marked including saddles screw etc. as required for termination including paint etc. complete in all respect to the entire satisfaction of Fire Officer

6 Sq mm x 4 core

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : Stainless Steel (Grade 304)

Providing and Fixing of Exit / Escape Route Signages/ Emergency Evacuation Plan made of 3 mm +/- 10 % Aluminum composite panel with photo luminescent self glowing signages in desired text/ graphics with U.V proof coating for pad protection fixed with mounting tape, steel screw which ever is required etc. complete to the entire satisfaction and direction of Fire Officer/Engr-in-Charge.

Providing & fixing of two numbers of M.S. Chain chrome with rings down from ceiling as handling hooks etc. arrangement including hooks for signage double plate (one Number) etc. complete in all respect to the entire satisfaction of Fire Officer.

a) Height 1.00 feet to 2.00 feet

Supplying, Testing and Commissioning of CO2 type Fire Extinguisher ISI marked conforming to IS: 15683:2018 of Capacity 4.5 Kg. complete with delivery hose horn, squeeze grip/ wheel type release valve, locking arrangement, operation manual and bracket. Operating Temperature: - 30ºC to + 60ºC etc. complete to the entire satisfaction and direction of Fire Officer/Engr-in-Charge.

Supplying, Testing and Commissioning of Powder Fire Extinguisher (Stored Pressure type) Capacity 06 Kg duly ISI marked conforming to IS: 15683:2006, with IS 4308, ISI marked ABC powder complete with squeeze grip release valve, discharge pipe, locking arrangement, pressure gauge, operation manual and bracket. Operating Temperature: -30ºC to + 60ºC etc. complete to the entire satisfaction and direction of Fire Officer/Engr-in-Charge.

Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required.

Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S.box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required.

Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.

Supplying, installation, testing & commissioning of sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required.

Supplying and Fixing of ABS junction Box for suitable Detector connection complete as required to the entire satisfaction of Fire Officer/ Engineer In-Charge

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required

Supply, Installation, Testing and Comissioning of 6 watt wall mounted wooden loudspeaker compatible with the existing PA system compete in all respect to the entire satisfaction of Fire Officer/Engineer-in-Charge.

SITC of Bosch make 120 watt Mixer Amplifier with 4 mic/line inputs (All inputs should have phantom power facility per condenser microphone), plus music source input, announcement only output, 3-wire volume override, 2 tone chime. Frequency Response - 80 Hz to 18 kHz (+1/-3 dB @ -10 dB ref. rated output), Distortion - <1% @ rated output power,1 kHz, Bass Control - Maximum. ± 8 dB, Treble Control - Maximum. ± 8 dB etc. complete as directed by the Fire Officer / Engineer-In-Charge. Model No. PLE-1ME120-3IN

Supply, Installation, testing & commissioning of 15 W high efficiency circular horn Loudspeaker (Horn Type) with weather resistance wall mounting angement etc complete to the entire satisfaction of Fire Officer/ Engineer-In-Charge

Supplying and drawing of cable Fire reatrdant PVC insulated copper conductor cable in the existing surface /recessed steel conduit of following pairs, cores and sizes including connections and interconnections etc. as required complete all as specified and as directed by Fire Officer/Engr-in-Charge: Speaker cable Single pair, 2-core, 1.5sqmm

Providing & fixing of 25 mm dia M.S. Conduit etc complete as required.

Please Enable Macros to View BoQ information